now i want to split it up. i want to count all the records for each month.
my field name is datein_now but its just a normal textfield and not a date field.
example in field: 05/02/02 10:24:31 AM.
also got a datein textfield:05/02/02
i had
Count(*) where datein_now between 05/05/01 and 05/05/31
When I enter a date into the [Return Text Date] field on my table and then select a value from the [Upgrade Fee] combo box followed by a selection from the [Upgrade Investment Class] combo box i want the value (or Date) in my Eligibility Date field to be amended by the given amount.
I have an expression, listed below, that i want to repeat (copy + Paste would be good) and amend the values. I have entered 2 and that seems to be all it will allow. I want to have 30 possible permutations to the fields 0 - 300 (in 50 intervals) by 5 (1,2,3,4 & 5)
The Code works below but I cant have anymore code in the expression builder
IDEAS please people.......
=IIf([Upgrade Fee]=0 And [Upgrade Investment Class]=1,[Return Text Date]+180,IIf([Upgrade Fee]=0 And [Upgrade Investment Class]=2,[Return Text Date]+150,""))IIf([Upgrade Fee]=0 And [Upgrade Investment Class]=3,[Return Text Date]+120,IIf([Upgrade Fee]=0 And [Upgrade Investment Class]=4,[Return Text Date]+90,""))
I want to create a formula (using expression builder or something else) who will separate the word id=276616652 lang=FR temp=80 in a new column (for each word)
I've built a query against a form and included a calculation to give me the average sum which looks like this :
=Sum([data field])/31*12.5
This work fine however, what is the best way to overcome the different number of days in the month ie; 28, 30 and 31? I've looked at the Expression Builder but getting lost :rolleyes:
Hi all, i have a field that uses Date/Time as the data type and what i want to do is to create records that only have the time between the hours of 9:00am and 9:15pm.... i think i need to use the expression builder for this, but im not really sure on the expression to use.. any ideas ???:confused:
Hi, I am fairly new to Microsoft Access and can't get to grips with the expression builder. I have several fields where I need to add validation rules and no matter what I try I can't seem to get it right. E.g I'm trying to set a validatio rule for only allowing locations into a certain field. Could someone please give me some help or point me in the direction of a good guide?
Hi, i am making a stock control program in Access. I have designed several tables, forms and queries etc. but have come stuck at the point where i want to create a button so when i click it, it automatically changes the stock level of all the products that are low in stock, to their "target stock level".
I am confused about how to do this. I tried making a button and going into the expression builder and putting:
I am trying to write an expression in my query which, given a condition, it uses the following criteria: "Carmarthenshire" Or "Ceredigion" Or "Neath Port Talbot" Or "Pembrokeshire" Or "Swansea"
So far I have come up with this: IIf([Forms]![Main Menu]![cboRegion]="West Wales","Carmarthenshire" Or "Ceredigion" Or "Neath Port Talbot" Or "Pembrokeshire" Or "Swansea")
However the Query builder complains the expression is incorrect or too complex etc. etc...
If I simplify it to this: IIf([Forms]![Main Menu]![cboRegion]="West Wales","Carmarthenshire") it works fine but unfortunately this isn't what I need.
Should you write an expression the criteria field in a query and use IIF, an interesting little bug appears that I have not managed to get around. Should you want the expression to return a range as the criteria (i.e. Between ... And ... ) it can't do it because IIF tries to evaluate the range before it passes the result back to the query. I need it to actually pass the Between And to the query to use as it's criteria. It can't do this, so it passes back a null and of course the query fails to produce any meaningful result.
I need to do this as I have two date text boxes in a form so that people can search through specific dates, but in the table these date fields can be blank. (Basically it's a Date Completed field, so if the job hasn't been completed, the date is left as Null) So i need users to be able to leave both text boxes blank so that the resulting query will display the Null values as well. If they leave one blank, it auto sets itself to the a minimum/maximum date. When both boxes are blank i need to return nothing so the criteria is effectively blank or = Is Null And Is Not Null to display all records.
Example of WIP
IIf(IsNull([Forms]![frmListImgChng]![txtDateComp1])=True And IsNull([Forms]![frmListImgChng]![txtDateComp2])=True,#15/01/2007#,IIf(IsNull([Forms]![frmListImgChng]![txtDateComp1])=True,Between #01/01/2007# And #01/04/2007#,IIf(IsNull([Forms]![frmListImgChng]![txtDateComp2])=True,Between [Forms]![frmListImgChng]![txtDateComp2] And #31/12/2030#,Between [Forms]![frmListImgChng]![txtDateComp1] And [Forms]![frmListImgChng]![txtDateComp2])))
The red bits of code are test values. The first one passes back to the query as it is not a range, the second does not as it is.
Basically i have a drop down that i want controlling the Criteria for each field in my query to have an advanced search. If i leave a field blank the query comes up with nothing so i tried this:IIf(IsNull([Forms]![Inventory Report Search]![Model]),Is Null,[Forms]![Inventory Report Search]![Model])this is not working. it is still returning the query blank. if i put valid critera in the dropdown it comes back Fine.how do i make is so if a field is blank it will return it as null or not even there.Note: also tried this;Forms]![Inventory Report Search]![Model] Or Forms]![Inventory Report Search]![Model] Is Nullworks, But comes back as too complex after a few searches and when i open the query there is a million or's in there. so that wont work.
Now I have been working for a few months with ACCESS but one thing that keeps giving me trouble and that is the "Expression Builder". I look at the Microsoft Help and it is not good in explaining this part of ACCESS. I have Access books and they are not good with explaining this aspect of Acess. Is there anyone with a good source to point me in the direction to learning the Expression Builder better then I know now?
This seems so simple and it probably is, I've probably been staring at my database for too long doing too many other things but here goes:
I want to create thank you letters for a list of people. I've made my query and gotten all their info together but now I can't make a report for the letter. I can make my text box but after that nothing seems to work out right. I'm not that good with VB code so I have been using Expression Builder which follows logic statements and not real code. I can't get even the address showing in one text box with 3 lines. Once I get that far I can get the remainder of my letter created because its all the same thing but I really need some help to get beyone the address!
Hi gang, I'm an Access rookie with a problem. I have a table with three columns and I need to create a result field which will "count" the number of occurences of a value in the "CustNum" field. (There are other columns in the table as well so I can't use a "count" function) Please see my simulated results in the "Count" column. I'd like to have a query create this expression. Any help? Thanks! Sorry for the formatting, not sure how to replicate a table in my post.
I need to implement the following logic in a report column:
IF hist_mis_cds!typgess = "", then calculated field= "" ELSE IF hist_mis_cds!typgess <> hist_code_translation! src_code_desc then calculated field= "X" ELSE calculated field= ""
I have implemented the following query in Expression Builder for the calculated field:
I need to implement the following logic in a report column:
IF hist_mis_cds!typgess = "", then calculated field= "" ELSE IF hist_mis_cds!typgess <> hist_code_translation! src_code_desc then calculated field= "X" ELSE calculated field= ""
I have implemented the following query in Expression Builder for the calculated field:
Hi, I need some help using functions in queries. I can calculate simple arithmetic in calculated fields, but fail when using functions. For example I have attached a doc file showing a query. One table displays record ids, the other four have data for consecutive dates for each record. I cannot make the query calculate the standard deviation of the data for each record. What expression would I use, I know it is stdevp but when i try and create the expression i get error messages galore.
Hi, can anyone help me? I'm using an access database to collect information and pull reports. One of the fields in one of the tables contains dates and time. In my query I would like to be able to state that records created after 17:00 and before 08:00 of the next day, get counted in next day reports. (i.e. Record 1 created 26.05.05 at 18:01 would show in my report as coming in on 27.05.05 at 08:00 am). Thanks,
I need to write an expession in the Expression Builder but I cant seem to get it correct. Here is what I want to do:
I have 2 forms and 1 query.
I want the criteria for my query to take the data from the loaded form, ie if form1 is loaded then take the value in field1/form1 as criteria, otherwise, if form2 is loaded then take the value in field2/form2 as criteria.
Form1 and form2 are never loaded at the same time.
Can someone give me a suggestion? Thanx for your help
I have query that filters my list in Access. The list can be filtered in different ways(like using a combobox). This is the criteria of the query for the field Title of the table Book:
Code: Like IIf([Forms]![frmName]![cmbSearch].[OnClick];"*" & [Forms]![frmName]![txtSearchBar] & "*"; [Book]![Title])
What I want is when the cmbSearch is clicked, the list must show the Tiltes where the title of the book contains the words of the search bar. When its not clicked on that button, the list must show all the titles.
Here is the SQL of the query:
Code: SELECT Book.ID, Book.Title FROM Book WHERE (((Book.Title) Like IIf([Forms]![frmName]![cmbSearch].[OnClick],"*" & [Forms]![frmName]![txtSearchBar] & "*", [Book]![Title]))
The problem is the list filters whether I click on a different cmdButton or an optionButton. I dont know why [cmbSearch].[OnClick] doesnt work.
I work for a landscape company and I am trying to create a customer specific report by linking only the services each client receives, leaving out the services they dont receive, we have over 50 different types of services we offer. I can get the expression to pull the correct information separately but I don't know how to build the expression together. Each expression is listed below.
=IIf([Call List- Cut Backs.2010 Season Status]="Automatic","Automatic Cut Backs",IIf([Call List- Cut Backs.2010 Season Status]="Call Every Year","Call Every Year Cut Backs"," "))
=IIf([Call List- Annuals.2010 Season Status]="Automatic","Automatic Annuals",IIf([Call List- Annuals.2010 Season Status]="Call Every Year","Call Every Year Annuals"," "))
I know how to do this in VB.NET ... I have a form with a combo box. I would like to create an "on change" event where it updates the text boxes on that same form depending on what's been selected in the combo box.
I don't know how to change the combo box's selected index so it defaults to the first item so there's no blanks/errors in my form.
So when the combobox contents is changed, I'd like a routine that updates all the text boxes kind of like this:
sub update() TextBox = "SELECT * FROM Table_Name WHERE ID =" & Combobox.text end sub
I'm facing an issue when I'm creating a Data Macro After Insert in Access 2010. In the value for the SetField, I use the expression builder. I wanted to use the DateAdd function but it not showing, also I cannot see my user define function (Module).
This behaviour seem to occur only in the instance of Expression Builder while in the Data Macro, everything is fine anywhere else including macro.
I am creating a database at my job. The database tracks how many hours a CONSULTANT spent with a CLIENT vs. the number of hours the CLIENT has bought. The hours from the CONSULTANT are entered into three different subforms (because there are a few "types" of hours). I want the total number of hours bought (entered/shown in the parent form) to subtract the hours the consultant worked (hours entered/shown in the sub forms). I half-way got it to work but I am making several entries in each subform and I need to calculate ALL hours. If someone could please help, I would greatly appreciate it. I have attached a copy of the database so to give you a better idea as to what I am talking about.
In Expression Builder and other areas of Access where the fields of a query show, my fields are not showing anymore for any of my queries. Does anyone have a solution for this?
Hi. I am using Expression Builder to total 3 columns for a query.
Total: [BaseTotal]+[ClickTotal]+[Adj Total]
The [Adj Total] is sometimes empty, and when this happens, Total is empty even though there are values for [BaseTotal] & [ClickTotal]. How can I make the Total show up regardless of whether any of the three items used to calculate it are Null?
