I need to create a table with names of controls on my forms.
I'll use that table to apply user rules.
Any solution to write the table automatically using VBA code ?
I know how to populate a combobox...
DoCmd.OpenForm YourFormName, acNormal, , , , acHidden
Dim c As Control
For Each c In YourFormName.Controls
[Control-Name].RowSource = [Control-Name].RowSource & c.Name & ";"
Next c
..., but not how to write a table.
I hope this makes sense?
I have a main form with a button that opens a new form. On the new form I have 5 fields. 1 of those fields is the Employee ID which I have the form getting from the main form (IE the Control Source is =Forms!Search_Employee!Employee_ID )and the other fields are bound to my table for the new form. I am unable to get the Employee ID to show in my table, it is not updating or writing the value to that field. Not sure if there is code or how I should or can get this field to write to my table. Any Ideas or be very appreciated. Thanks anyways guys I igured this one out. I was able to set the dafault value to point ot my main form so that my Control Source could point to my table and it worked.
Can anyone tell me what's wrong with the below statement ? I'm trying to pull the contents from a text box in a form. The text box is supposed write the contents to a field (memo data type) in a table. Thanks ! ! !
strComments = Forms![Payroll History]![Comments].Column(0)
Hi Guys, I don't know Access very well but I know enough to generate a 2 dimensional database. The problem I have is that I have been asked to look at a travel agents database to create some additional letters. The problem is that they use a form which has an underlying data table called customers. When they create a record in the form all fields in the customers table are filled in except those on the form which derive their data by calculating two or more fields i.e Date Due is [Date of Travel]-70 (days), Balance Owing is [Cost]-[Deposit]. None of these derived fields fill in their corresponding fields in the customers data sheet.
I would welcome any ideas please. Thanks in anticipation
PompeyFC
In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.
I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.
Once a control has been named and referenced a couple of times it becomes a fraught task to rename said control.
Is there an easy way that controls and their references can be globally renamed, so that the DB continues to work?
I am creating a query that retrieves data from one table and creates a second table. I want to name the columns in the new table using the contents of the controls from a form within the same mdb. The form will be open when this query is run, but I am having trouble creating and saving the query.
Here is a sample of what I am trying to do...Any help is greatly appreciated!!
Thanks
SELECT IndividualHolidays.SU, IndividualHolidays.SSN, IndividualHolidays.Init, IndividualHolidays.LName,
Max(IndividualHolidays.NewYearsDay) AS Forms!HolidayDatesEntry!NewYearsDay,
Max(IndividualHolidays.AftNewYears) AS Forms!HolidayDatesEntry!AftNewYears,
Max(IndividualHolidays.PresDay) AS Forms!HolidayDatesEntry!PresDay,
Max(IndividualHolidays.AftPresDay) AS Forms!HolidayDatesEntry!AftPresDay
…<etc>
INTO HolidaysByEmp
FROM IndividualHolidays
GROUP BY IndividualHolidays.SU, IndividualHolidays.SSN, IndividualHolidays.Init, IndividualHolidays.LName;
I have a main form that has a Tab Control. The tab control could have 5 to 10 tabs. Each tab has a subform and in some instances a tab could have a tab inside that tab with subforms as well. I want to be able to get the subform names in each tab.
I am able to get the main form name by using me.form.name
How can i get the names of each subform in each tab?
I am creating a dynamic form and need to get the names into variables for later use...
I have a form with several data fields on it. I also have a button on the form that allows the user to duplicate a record . The reason for this duplication is so that if there will be an additional client record for the same customer, but only one piece of data will need to be changed, it's easier to copy the record and then change the one field.
However, I am getting the following message:
"some of the field names you tried to paste don't match fieldnames on the form"
and then not all data in all fields gets duplicated.
I need to figure this out, but am going nuts with it. If anyone has an idea or two they'd care to toss my way, I would be happy.
Thanks one more time, in advance!!
I am working on an form (using Access 2000 and VBA) that stores registration information, along with events that were attending, in a table and later retrieves that same information from the table to display the regist. info, events attended, and allows the user to change any current info along with adding new/recently attended events to each record.
I am currently allowing a max of six events, along with event details, to be stored and I am running through six different if statements to match the Event_List (name of the combo box that contains "Event 1 Event 2...Event 6") to the appropreiate information in the table. I have started to simplify the code to remove the redundancy by running a Do While to to find the correct Event by using an integer variable that starts at 1 and is incremented until it matches the 7th character (the number portion) of the Event chosen from the Event_List. After this I want to use that integer variable to say what event information in the table to gather. My problem is this: I have tried many different varieties of the following code and I am unable to make it work. I had never used Access up until a week and a half ago, and a few days ago I went and bought the book "Access VBA Programming for Dummies" but it doesn't help for this problem. Here's part of the code:
Variables (Event_Name, PMT, Receipt, Payment_Type, PIF) refer to Form textboxes while the variables in the [] refer to table field names.
'------Code I'm Currently Working On-------
Dim intX As Integer
Dim EventVal As Integer
Dim strX As String
intX = 1
EventVal = Val(Mid(Event_List, 7, 1))
Do While EventVal <> intX And intX < 6
intX = intX + 1
Loop
strX = str(intX)
Dim E_Name As String
Event_Name = [Event strX ]
PMT = [PMT strX]
Receipt = [Receipt strX]
Payment_Type = [Payment Type strX]
PIF = [Paid In Full strX]
'-----Old Code That I'm trying to simplify-------
If Event_List = "Event 1" Then
Event_Name = [Event 1]
PMT = [PMT 1]
Receipt = [Receipt 1]
Payment_Type = [Payment Type 1]
PIF = [Paid In Full 1]
Camp_Site = [Camp Site 1]
Cabin_Number = [Cabin Number 1]
ElseIf Event_List = "Event 2" Then
Event_Name = [Event 2]
PMT = [PMT 2]
Receipt = [Receipt 2]
Payment_Type = [Payment Type 2]
PIF = [Paid In Full 2]
Camp_Site = [Camp Site 2]
Cabin_Number = [Cabin Number 2]
ElseIf Event_List = "Event 3" Then
Event_Name = [Event 3]
PMT = [PMT 3]
Receipt = [Receipt 3]
Payment_Type = [Payment Type 3]
PIF = [Paid In Full 3]
Camp_Site = [Camp Site 3]
Cabin_Number = [Cabin Number 3]
PLEASE HELP!!!!
Access 2007 Pro.Attempting to use a query and a table to populate a 1:N form/subform using the Form Wizard. The wizard will not display the field names of the query.
View 2 Replies View RelatedHi,
I am fairly new to msaccess programming and am trying to build a stock control system for my business.
I am happy with everything I have done so far but there is one thing I cannot figure out.
I have set up so that the user can click a button and remove the relevant number from the stock level. The buttons are for removing 1, 5, 10 or 20 (there are reasons for these numbers). However I would also like the button to take information from the form (which is referenced to a query) and write that information, along with an autogenerated id number and the current date/time to another table. This is for our record keeping, so that we can record what is selling well etc and when the last one was sold.
How do I do this?
I have gone through the help files and my books, but I think the problem is I don't know where to start looking.
I also want to add a button that will add items to an order table. Again by taking the information from the form and writing it to another table. With this one a message will appear asking for the quantity to be entered. It will also check the order table to see if the item is already there and advise if it is.
Any help gratefully received.
Steve:confused:
Hi,
I have a check box that gets ticked when 'work complete', it adds the parts/service totals and fills in the 'parts total', 'vat' and 'total' fields.
This works fine but I need it to write the values to the table as well rather than just displaying the values in the fields so reports can be produced etc.
Anyone know the easiest way to do this?
Thanks
Housey
Hi all,
wonder if anyone can assist me with this the SQL Server
security/write (?) issue. The SQL Server Admin has created a table for our Dept. to use and via SQL Server I can get access to it using the username and password she supplied to me. I can also link to this table in Access 2002 via ODBC which is the way I am using to write to SQL server tables. I have developed an Access application to allow one of our staff to be able to write data to the SQL Server table at a click of a button, however when I open the table the 'add new record' button is greyed out, I can not add any data to the table.
I explained this problem to the Admin as well as the way in which we access the table and she is certain that the problem lies in Access but i'm unsure how that can be the case.
Has anyone experienced this problem before ? Is there a fix and if so how is that implemented ?
Should I also post this in the SQL server forum ?
Thanks in advance,
Mitch....
Hi all,
I need to figure out how to have two calculated fields written to the database table instead of just being displayed in the form.
The user selects a number from 1 to 5 in the first field, and a number from 1 to 7 in the second field. The first calculating field multiplies these two numbers and displays the result. The second calculating field determines where the resulting number fits in three ranges of numbers and displays the result as Low, Medium, Or High.
My problem is the calculated results are be displayed in the form but not being written to the table. I cannot create a report to display all the High results, etc.
How do I update the calculation field formula to write the results into the table so I can create queries/reports on the calculated data?
Thanks,
bugleboy62
I'm using Access 2010 and am trying to pass a variable in a form field and store it in a table i.e. I have a customer database with various fields: Customer_ID, Customer_Name, Customer_Address etc. After selecting a particular record i.e. Customer_ID = 20 l need to store the record number '20' in a temporary table. I presume that l could then use Dlookup to read the info back at a later stage.
View 7 Replies View RelatedI am trying to write some fields to an access table definition. It is working for the most part except that I want to write some of the fields as dbText and others as dbDate. For some reason it is writing all of them as dbDate and I don't know why.
Code:
additionalColumns = Array("a","b","c","d","e","f")
'add additonal columns to report
For i = LBound(additionalColumns) To UBound(additionalColumns)
MsgBox additionalColumns(i)
If additionalColumns(i).Value = "a" OR "b" Then
Set columnNames = xlsht.Cells(1, additionalColumns(i))
Set FieldName = tb1.CreateField(additionalColumns(i), dbDate, 10)
tb1.Fields.Append FieldName
Else
Set columnNames = xlsht.Cells(1, additionalColumns(i))
Set FieldName = tb1.CreateField(additionalColumns(i), dbText, 150)
tb1.Fields.Append FieldName
End If
Next i
I concatenated 2 fields CR_Numbers: = CR_Number & [Sub Number] to display 12.01: from 12 and 1. I am now wanting to lookup the CR_Numbers to edit or add information into other fields.
I want to use a pop up form to edit/add data without having the form add an entire row to the table. How do I reference the Table ID so that it will go to the equivalent row to add the data in?
Main Table = Change Request
Email Table = AORB_Email
Fields in Form!AORB_EMail: Change Request (CR_Numbers), Priority (Pri_Name), Hours (Hour)
I plan on using the Priority and Hours in the email to set some dates and expiration times as well as in the subject of the email. I have figured out the email setup, and if I manually fill in the Priority and Hours fields everything works as it should.
This is the first time that I have done any major work with forms. After I thought I had finished a problem came up. There are several forms that are use to input information into a table. When the form is opened it grabs an automated number for tracking. The problem is, that if the form is opened and then closed it creates a line of data with all null values.
What I would like to do is have the form open, the user fills out the information, and upon pressing the "save" button, the data will save to the table. I think I need to have each text box write to a variable and then save on the click event. Or I could be completely wrong and need to do something else.
i'm guessing this is something I would learn in Forms 101 if i had ever taken that type of course
Thanks
I am using Access 2010. How do I prevent the object typed into the textbox on a queryform being written to the table. The result from the name typed into the textbox on my query form correctly produces the result from the query, and my macros then produce the correct report, which I can either print or close due to the controls in the heading of the report. However, when I view the table, the name typed (only) has been inserted into the correct field as a new record in the table. Is there a macro I can add (I assume to an event in the query form) to prevent this happening?
View 8 Replies View RelatedI am building forms from a large questionnaire and I need to write to 2 tables from one field in the form. How can I do this?
The reason I need to do this is because I have over 255 variables so I needed to create 2 tables. I want to write my case number to both files so I will have a link between the 2 files. Thanks.
I am creating a database at my job. The database tracks how many hours a CONSULTANT spent with a CLIENT vs. the number of hours the CLIENT has bought. The hours from the CONSULTANT are entered into three different subforms (because there are a few "types" of hours). I want the total number of hours bought (entered/shown in the parent form) to subtract the hours the consultant worked (hours entered/shown in the sub forms). I half-way got it to work but I am making several entries in each subform and I need to calculate ALL hours. If someone could please help, I would greatly appreciate it. I have attached a copy of the database so to give you a better idea as to what I am talking about.
Thank you.
Basically, I originally wanted to create a form which I can input data into Access with by using a button (I was unable to get Access to append the information from the forms to the table, so it didn't work out!). I did not want the fields on the form to be linked to a table, as then a record (and most importantly an auto-number) is created as soon as somebody starts typing. Should somebody stop typing halfway through and quit the form an autonumber will have been generated, which makes the number of "users" seem higher than it actually is. I got around this by changing the field from autonumber to number and then creating a query that selects the maximum value of ID in the table, then adds 1 to it (which is essentially the lowest unique number. I tend to call this newID).
The problem I now have is setting this to be written to the table alongside the data from the form (the rest of the fields on the form are now connected to the table, as I am no longer using an autonumber). I have tried the following: Setting the form to run the expression "[ID] = [qryMaximumUserID]![NewID] " on load. This returns the error "The object doesn't contain the Automation object 'qryMaximumUserID.' Setting the control source of the text box to be dLookup. This fills the textbox with the correct value, but then it doesn't write it to the table! Setting the default value of the field to be 0, then running an update query to update any ID of 0 (criteria "0" to the value of newID "update to: [qryMaximumUserID].[NewID]. "). However this doesn't work as whenever the query is run it asks for a parameter to be entered, rather than just taking the value from the other query. Writing a macro that is run on load to SetValue of item:[ID] to expression: [Forms]![qryMaximumUserID]![NewID]. However this returns an error "Microsoft Access cannot find the referenced form 'qryMaximumUserID' you entered in the expression.
I am periodically importing Excel files into access.Making the data usable requires removing spaces, parsing certain fields, adding datasource field, etc. Currently, I am importing the un-formatted data into a staging table, cleaning it up with a query and then copying the updated staging table to the final table.
View 2 Replies View RelatedHello All
I am creating a production line database for use on a touch screen (no keyboard or mouse) which has to be really easy to use. At the start of the week i got to the point were i thought i would test what i had done to date and have come across a serious issue.
I thought that the data from the forms i am using to input the data to the main table tblProductionDetails would write into individual records but although new records are created at the appropriate point e.g. when the comand button labelled START on frmDetailsCorrect is clicked the data is not writing to the new record that is created. I thought it would be an easy thing to solve but 20 hours later and much mucking about with DoCmd.Goto's etc i am no further forward. I have attached what i have done in the hope it is something obvious and somebody will be able to point me in the right direction.
The way the db is set up is that frmDayStart needs to be opened the command button clicked and then each form opens once the OK comand button in the top right of each opened form is pressed.
It is still a work in progress so a bit rough and ready but i need to get this fundimental problem sorted before moving on.
Any help appreciated (i am not looking for somebody to do the work on the DB just point me in the right direction or point out what the error might be).
Regards
Adrian
I have a query called VOLTEST that is not bound to the form. VOLTEST sums a field in a table from a subform. When the input is finished in the subform and control goes back to the main form, I want the total from the VOLTEST to show in a field on the form that is not a tab stop. Basically, this is just for reference.
I have tried to put =[VOLTEST]![SumOftest_value] in the control source of the field on the form but I keep getting "Name?" as the result instead of the sum total.
I can run the query in the gotfocus of the first field in the tab order after the subform and I get the correct result in a datasheet view. So, I know the query is working correctly. I just need it to show the result in field on the form.
Thanks for your help. GG