I have a comboBox with some names binded to it....With in the names some of them are like--- Store's Store, and like Danny's Gym...when i select names with ' in them i get this exception
Incorrect Syntax near 'S' Unclosed Question mark before the charectar string ORDER BY "SomeValue".....how could i go about fixing this?????
should i include some king of function that pulls out those quotes??? or what??? any help with this issue
I am calling a stored procedure that looks like this.
Code:
ALTER PROCEDURE [dbo].[VerifyLogin]
-- Add the parameters for the stored procedure here
@Email nvarchar (100),
@Password nvarchar (200)
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
DECLARE @Count int
DECLARE @Accounts int
SET @Accounts = (Select Count(*) from Users Where UPPER(Email) = UPPER(@Email))
IF @Accounts = 0
BEGIN
RAISERROR('E-mail address not found.', 10, 1)
END
ELSE
BEGIN
SET @Count = (Select Count(*) from Users Where UPPER(Email) = UPPER(@Email) and Password = @Password)
IF @Count > 0
select 1 as Verification
ELSE
select 0 as Verification
END
END
When I enter a login that does not exist, the error is not thrown in .net. Tracing the code shows normal execution. What am I doing wrong?
I am using Compact Edition 3.5 against the Northwind.sdf database. The following SQL statement throws an error window in Visual Studio 2008 that states "The parameter is incorrect.". This only occurs when I have an input parameter inside the CASE statement.
**********************************************************************************************************
PLEASE DO NOT TELL ME I CAN JUST USE 'WHERE @CompanyName LIKE '%ABB%''
BECAUSE I UNDERSTAND THAT - I WANT TO KNOW WHY THE SYNTAX I HAVE IS
THROWING AN EXCEPTION
**********************************************************************************************************
This throws an exception when input parameter is in the CASE statement:
SELECT [Customer ID]
FROM Customers
WHERE (CASE WHEN @CompanyName LIKE '%ABB%' THEN 1 ELSE 0 END = 1)
This DOES NOT throw an exception (I know they do not get me the same results):
SELECT [Customer ID]
FROM Customers
WHERE (CASE WHEN [Company Name] LIKE '%ABB%' THEN 1 ELSE 0 END = 1)
TIA!
I have to create a custom rendering extension for SQL Server 2005 Reporting Services.
I followed the instructions in the MSDN article: http://msdn.microsoft.com/msdnmag/issues/05/02/CustomRenderers/default.aspx
I am running the report server under an administrative account provileges on the local machine (XP Pro SP2).
The Reporting Services is installed for SQL Server 2005 Trial/Evaluation Edition (not expired yet) and has been upgraded to Service Pack 2.
The Report Manager runs under a default ASPNET account.
After deploying the extension according to instructions in the article, I see the custom renderer in the list of available rendering formats in the dropdown in the Report Manager.
However, when I select that renderer and click "Export", a new IE window opens with the following error message:
Server Error in '/Reports$SQLSERVER2005DEV' Application.
That assembly does not allow partially trusted callers.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: That assembly does not allow partially trusted callers.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Exception: That assembly does not allow partially trusted callers.]
[Exception: An error occurred during rendering of the report.]
[Exception: An unexpected error occurred in Report Processing.]
Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +503
Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +958
Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +143
Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +153
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +358
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
My "why is it not working" question basically breaks down to 3 questions:
1. Why does this error say "partially trusted" whereas the new element in the rssrvpolicy.config file explicitly asks for "FullTrust" permissions?
2. Is there any deployment step that I'm missing?
[For now, it's:
- copy-and-paste the dll into ReportServerin directory;
- add a new CodeGroup element to the rssrvpolicy.config file;
- add a new Extension element to the rsreportserver.config file;
- IIS reset;
- Reporting Services service restart.]
3. Also, I checked the deployment instructions in BOL (Deploying Rendering Extension: http://msdn2.microsoft.com/en-us/library/ms154516.aspx), just to make sure I didn't miss anything.
An interesting this is, the BOL article does NOT mention a requirement for adding a new element into rssrvpolicy.config file.
Is this an error in the September 2007 Books Online?
The same error (regarding "partically trusted" - see above) occurs even after I signed the assembly with a strong name key (although this is not mentioned in the articles, but I figured it might be necessary).
Could someone point me in the right direction as to how to properly deploy a custom rendering extension, please?
Thanks a lot!
I ran into this a few weeks ago and found that several others had as well, but no one had yet found an answer. I found the answer (at least one of the answers) this weekend and wanted to share it. I had recently added a subreport to a group footer in a table and started getting an error. Depending on the data, the error wasn't always present. I didn't have a problem when I moved the subreport to any other area in the report.
Here is the error I was getting:
An error occurred during local report processing
An internal error occurred on the report server. See the error log for more details.
It was a local report (rdlc), so naturally, there was no error log <g>. I added an event handler for ReportError and collected this information:
7/23/2006 5:18:22 PM
OS: Microsoft Windows NT 5.1.2600 Service Pack 2
*** EXCEPTION ***
Message: Exception has been thrown by the target of an invocation.
Source: mscorlib
Stack Trace: at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Delegate.DynamicInvokeImpl(Object[] args)
at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme)
at System.Windows.Forms.Control.InvokeMarshaledCallbacks()
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.UserControl.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
at System.Windows.Forms.Application.Run(Form mainForm)
at SX.MainProgram.Main() in C:Documents and SettingsMYeagerMy DocumentsVisual Studio 2005ProjectsSXSXMainProgram.cs:line 22
*** INNER EXCEPTION ***
Message: Reporting Service Exception
Source: SX
Stack Trace: at SX.ReportSalesForm.reportViewer1_ReportError(Object sender, ReportErrorEventArgs e) in C:Documents and SettingsMYeagerMy DocumentsVisual Studio 2005ProjectsSXSXReportFormsReportSalesForm.cs:line 84
at Microsoft.Reporting.WinForms.ReportViewer.OnError(Exception e)
at Microsoft.Reporting.WinForms.ReportViewer.UpdateUIState(Exception e)
at Microsoft.Reporting.WinForms.ReportViewer.OnRenderingCompleteUI(ProcessThreadResult result, PostRenderArgs postRenderArgs)
*** INNER EXCEPTION ***
Message: An error occurred during local report processing.
Source: Microsoft.ReportViewer.WinForms
Stack Trace: at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
*** INNER EXCEPTION ***
Message: An internal error occurred on the report server. See the error log for more details.
Source: Microsoft.ReportViewer.Common
Stack Trace: at Microsoft.ReportingServices.Diagnostics.Utilities.RSTraceInternal.Assert(Boolean condition, String componentName)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteVariant(Object variant, Boolean convertDBNull)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeTableValues(Object value)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeTableValues(Object value)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteScopeLookupTable(ScopeLookupTable scopeTable)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteSubReport(SubReport subReport)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteRectangle(Rectangle rectangle)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableRow(TableRow tableRow)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableRowList(TableRowList rows)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTableGroup(TableGroup tableGroup)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteTable(Table table)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteDataRegion(DataRegion dataRegion)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItem(ReportItem reportItem)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemList(ReportItemList reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportItemCollection(ReportItemCollection reportItems)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReport(Report report)
at Microsoft.ReportingServices.ReportProcessing.Persistence.IntermediateFormatWriter.WriteReportSnapshot(ReportSnapshot reportSnapshot)
at Microsoft.ReportingServices.ReportProcessing.ChunkManager.SnapshotChunkManager.SaveReportSnapshot(ReportSnapshot reportSnapshot)
at Microsoft.ReportingServices.ReportProcessing.ProcessingResult.Save()
at Microsoft.Reporting.LocalService.Render(PreviewItemContext itemContext, Boolean allowInternalRenderers, ParameterInfoCollection reportParameters, IEnumerable dataSources, DatasourceCredentialsCollection credentials, CreateAndRegisterStream createStreamCallback, ReportRuntimeSetup runtimeSetup, ProcessingMessageList& warnings)
at Microsoft.Reporting.WinForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
This wasn't exactly enlightening, an exception in an ASSERT in the reporting services dll, but since I knew that results varied with different data, I tracked it down that way.
THE SOLUTION:
The problem occurs when data for group expression is null. If there is no subreport in the group footer, this isn't an issue, but if there is, you get the error. For instance, if your data comes from a SQL statement with a LEFT OUTER JOIN (as mine did), and the group expression uses a column that contains nulls as a result of the LEFT OUTER, this exception will be thrown. This one was VERY DIFFICULT to track down, but it's easily reproducable. It has nothing to do with what (if anything is) on the subreport, what the data the subreport uses looks like, whether there are parameters or not. It's purely having nulls in the data used by the group expression for the main report. I found that if I changed my SELECT from mytable.mycolumn to ISNULL(mytable.mycolumn, 0) the error went away.
Mike Yeager
Hi,
I am using sql2k5. I just wanted to throw an error from stored procedure with some message to C# to rollback my transaction.
Here is how i wnated to do ( in sequence )
C#
=====
Open a connection
Begin the transaction
Execute the command
In the Stored Proc
===========
do multiple operations one by one
if error
stop processing further
Throw the error
C#
========
if exception
rollback the transaction
else
commit the transaction
I have tried using raise error in stored proc but never thrown exception
Can any one let me know how to achieve this scenario??
~Mohan Babu
Hi All,
We have written a multithreaded application in which we are maintaining separate Database connections for each thread. these connections are opened and closed at the start and exit of the thread.
We have observed that even if there is only one thread running ( application thread), execution of simple Select queries some times throws Native exception(Error - 0xc0000005 ).
This error comes intermittently. Execution of same query doesn't throw exception.
Further investigation by breaking the debug at the time of native exception and then looking into the stack trace shows that native exception has occured at one of the Native API (CompileQueryPlan() ) which is being called implicitly by the SQL Mobile.
Each time when we see native exception stack trace shows failure at CompileQueryPlan() call.
Let me know if this is a known defect in SQL Mobile 2005 or there is something else that is causing native exception.
Thanks,
Nikhil
Greetings everyone, I am attempting to build my first application using Microsofts Sql databases. It is a Windows Mobile application so I am using Sql Server Compact 3.5 with Visual Studio 2008 Beta 2. When I try and insert a new row into one of my tables, the app throws the error message shown in the title of this topic.
'((System.Exception)($exception)).Message' threw an exception of type 'System.NotSupportedException'
My table has 4 columns (i have since changed my FavoriteAccount datatype from bit to Integer)
http://i85.photobucket.com/albums/k71/Scionwest/table.jpg
Account type will either be "Checking" or "Savings" when a new row is added, the user will select what they want from a combo box.
Next is a snap shot of my startup form.
http://i85.photobucket.com/albums/k71/Scionwest/form.jpg
Where it says "Favorite Account: None" in the top panel, I am using a link label. When a user clicks "None" it will go to a account creation wizard, and set the first account as it's primary/favorite. As more accounts are added the user can select which will be his/her primary/favorite. For now I am just creating a sample account when the label is clicked in an attempt to get something working. Below is the code used.
private void lnkFavoriteAccount_Click(object sender, EventArgs e)
{
FinancesDataSet.BankAccountRow account = this.financesDataSet.BankAccount.NewBankAccountRow();
account.Name = "MyBank Checking Account";
account.AccountType = "Checking";
account.Balance = Convert.ToDecimal("15.03");
account.FavoriteAccount = 1;//datatype is an integer, I have changed it since I took the screenshot.
financesDataSet.BankAccount.Rows.Add(account);
//The next three lines where added while I was trying to get this to work.
//I don't know if I really need them or not, I receive the error regardless if these are here or not.
this.bankAccountTableAdapter1.Update(financesDataSet);
this.financesDataSet.AcceptChanges();
refreshDatabase();
}
the refreshDatabase() code is here:
private void refreshDatabase()
{
this.bankAccountTableAdapter1.Fill(this.financesDataSet.BankAccount);
//Aquire a count of accounts the user has
int numAccounts = financesDataSet.BankAccount.Count;
//Loop through each account and see which one is the primary.
for (int num = 0; num != numAccounts; num++)
{
//Works ok in frmMain_Load, but when my lnkFavoriteAccount_click calls this, it throws the error.
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
{
//Display the primary account on our home page. User can click the link label & be taken to their account register.
this.lnkFavoriteAccount.Text = this.financesDataSet.BankAccount[num].Name.ToString();
this.lnkFavoriteFunds.Text = this.financesDataSet.BankAccount[num].Balance.ToString();
break;
}
}
}
and my form_load code
private void frmMain_Load(object sender, EventArgs e)
{
refreshDatabase();
}
So, when I click on the lnkFavoriteAccount label, and my new row gets added, the app stops at the following line in my DataSet.Designer
[global:ystem.Diagnostics.DebuggerNonUserCodeAttribute()]
public byte FavoriteAccount {
get {
try {
return ((byte)(this[this.tableBankAccount.FavoriteAccountColumn]));
}
catch (global:ystem.InvalidCastException e) {
//Stops at the following line, this error was caused by 'if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)'
throw new global:ystem.Data.StrongTypingException("The value for column 'FavoriteAccount' in table 'BankAccount' is DBNull.", e);
}
}
set {
this[this.tableBankAccount.FavoriteAccountColumn] = value;
}
}
I have no idea what I am doing wrong, all of the code I used I retreived from Microsofts help documentation included with VS2008. I have tried used my TableAdapter.Insert() method and it still failed when it got to
if (this.financesDataSet.BankAccount[num].FavoriteAccount == 1)
in my refreshDatabase() method it still failed.
When I look, the data has been added into the database, it's just when I try to retreive it now, it bails on me. Am I retreiving the information wrong?
Thanks for any help you guys can offer.
Johnathon
Hi,
I got an strange problem with one of my packages.
When running the package in VisualStudio it runs properly, but if I let this package run as part of an SQL-Server Agent job, I got the message "The script threw an exception: Exception of type 'System.OutOfMemoryException' was thrown." on my log and the package ends up with an error.
Both times it is exactly the same package on the same server, so I don't know how the debug or even if there is anything I need to debug?
Regards,
Jan
I am trying to return a record from my sqlDataReader in 2.0.
Here is the code that is throwing me:
Dim strSQL As String = "SELECT login FROM (Table) WHERE (username = 'something')"
Dim sqlDataReader As SqlDataReader
Dim ConnStr As String = "connectionString"
Dim myCn As New SqlClient.SqlConnection(ConnStr)
Dim myCmd As New SqlClient.SqlCommand(strSQL, myCn)
myCn.Open()
sqlDataReader = myCmd.ExecuteReader(CommandBehavior.CloseConnection)
The error that I'm gettin is this: 'Incorrect syntax near ')'.' and its on my ExecuteReader line. This works for me in 1.1 but not 2.0. Any ideas as to why?
J
I am trying to merge records with a stored procedure and I am getting a constraint violation error. Just wondering is there a way of finding out which records are the actual culprit?
This would help greatly in being able to troubleshoot this issue.
The error is this:
2/21/2008 12:40:39 PM :: Violation of UNIQUE KEY constraint 'SK_SomeConstraint'. Cannot insert duplicate key in object 'tblTable'.
The statement has been terminated.
The constraint is a group of clustered indexes that must be unique:
GO
/****** Object: Index [SK_SomeConstraint] Script Date: 04/11/2008 14:56:17 ******/
ALTER TABLE [dbo].[tblTable] ADD CONSTRAINT [SK_SomeConstraints] UNIQUE NONCLUSTERED
(
[IDa] ASC,
[IDb] ASC,
[IDc] ASC,
[someField] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
OK so I have this SSIS package that uses a connection call "Conn1". I added this to my configuration file (which also contains connections called "Conn2" and "Conn3" which are used by other packages. Works fine in DEV when run via SQL Agent. I moved SSIS package and config file to prod server. SQL Agent now throws error on this package saying it cannot resolve path to "Conn3". This package doesn't use "Conn3"... I opened both the SSIS package and the Config file in notepad and verified Conn3 wasn't referenced in the package... HELP !!!!
View 3 Replies View RelatedI am new to SSAS and learning mdx, I am running the following query but it is throwing error "Parser: The syntax for 1 is incorrect",
Select [Measures].[Order Quantity] on axis(0),
[DimProduct].[Product By Category].[ProductCategory].members on axis(1)
From [ResellerSales]
where
Except({[DimProduct].[Product By Category].[ProductCategory].members},
{[DimProduct].[Product By Category].[ProductCategory].&[1]})
Sorry seem to be havign no end of trouble with SQL today. I need to create a query that will rank tickets using the row count of another table which has a relationship with the primarykey of that ticket table. I decided to spilt it into two querys, one which gets the count each ticketid has within a date peroid and relating to a os:: SELECT COUNT(*) AS count, Tickets.TicketID, Systems.OSFROM Rating INNER JOIN Tickets ON Rating.TicketID = Tickets.TicketID INNER JOIN Systems ON Tickets.SystemID = Systems.SystemIDWHERE (Rating.DateVoted >= @date)GROUP BY Tickets.TicketID, Systems.OSHAVING (Systems.OS = @osid) This works, BUT when I put in the date using: command.CommandText = "SELECT COUNT(*) AS count, Tickets.TicketID, Systems.OS FROM Rating INNER JOIN Tickets ON Rating.TicketID = Tickets.TicketID INNER JOIN Systems ON Tickets.SystemID = Systems.SystemID WHERE (Rating.DateVoted >=" + Datetime.Now.Adddays(-7) + ") GROUP BY Tickets.TicketID, Systems.OS HAVING (Systems.OS =" + 1 + ")"; And it throws up an error saying there was a syntax error at '22' (the hour I am currently on). So: Any idea how I can fix thisAny ideas on creating a query that will do the above, but also return the ticket informationHow do you link querys (I might have to do this if I can't work out 2)Please, If anyone has any ideas. This is driving me crazy
View 5 Replies View RelatedHello,I'm using a typed dataset to access my database (SQL Express); I have a table that returns data, which two fields are null; I'm getting this error:{"Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints."}There are no foreign-key or unique key constraints, so it has to be a non-null issue; I changed the two fields in the table to have a null value of Empty instead of Throw Exception, but I don't understand what the problem is coming from... I'm at a loss.Thanks.
View 2 Replies View Relatedi have a data flow configured to use a ole db source. the ole db source uses an ole db connection manager pointing to the adventureworks db which suceeded when i tested its connection. the data access mode of the ole db source is "sql command". below is the sql command text:
SELECT SpecialOfferID, Description
DiscountPct, Type, Category, StartDate,
EndDate, MinQty, MaxQty, ModifiedDate
FROM Sales.SpecialOffer
WHERE ModifiedDate >= ? AND ModifiedDate < ?
this query uses 2 paramaters, each of which is mapped to a datetime variable which falls with the range of the ModifiedDate column as follows:
Parameter0: User::ExtractStartDate
Parameter1: User::ExtractStopDate
ExtractStartDate is set to 7/1/2001 and ExtractStopDate is set to 3/31/2004. however, i get the following error when i press the preview button in the ole db source editor: "there was an error displaying the preview. additional information: no value given for one or more required parameters (microsoft sql native client)".
as far as i can tell, i have the ole db source configured correctly. thus, i can't figure out why this error is being generated. has anyone else experienced this issue? if so, were you able to resolve it? is this a bug?
thanks in advance.
Our log reader process is throwing an access violation error every 10 minutes or so. It runs fine for a bit then fails. Below is, I think, the important info from a stack dump analysis. We are running SQL 2012 SP1 64 bit. I think we can either install SP2 or open a case with Microsoft.
0:000> kC 1000
Call Site
sqlmin!ReplArticleCmd::updated_column
sqlmin!ReplArticleCmd::AddSupdateParams
sqlmin!ReplArticleCmd::GenerateSUpdateProcedure
sqlmin!ResolveUpdateCommand
sqlmin!ReplTranInfo::ProcessInsert
[Code] ....
I can see that the sp_replcmds SP is running when this happens.
* BEGIN STACK DUMP:
* 07/15/15 12:37:39 spid 81
*
*
* Exception Address = 000007F988FCA480 Module(sqlmin+0000000000C4A480)
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 0000000000000000
[Code] ....
I've been setting up subscriptions to a merge publication for the past 3 days. All of a sudden, I'm getting a pile of very strange errors. Replication is configured. I have 16 subscribers to an existing publication configured and synchronizing changes without any issues. The script that I'm using to create all of the subscriptions is as follows:
use [PIC]
exec sp_addmergesubscription @publication = N'PIC', @subscriber = N'machinenameSQLEXPRESS',
@subscriber_db = N'MyDatabase', @subscription_type = N'Push', @sync_type = N'Automatic',
@subscriber_type = N'Global', @subscription_priority = 75, @description = N'', @use_interactive_resolver = N'False'
exec sp_addmergepushsubscription_agent @publication = N'PIC', @subscriber = N'machinenameSQLEXPRESS',
@subscriber_db = N'MyDatabase', @job_login = null, @job_password = null, @subscriber_security_mode = 1,
@publisher_security_mode = 1, @frequency_type = 64, @frequency_interval = 0, @frequency_relative_interval = 0,
@frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0,
@active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0
GO
The last one that I added #17, gives the following errors after successfully creating the subscription.
Command attempted:
{call sys.sp_MSmergesubscribedb ('true', 0) }
Error messages:
The merge process could not initialize the subscription. Ensure that the subscription registration exists at the publisher, and reregister the subscription if necessary. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201011)
Get help: http://help/MSSQL_REPL-2147201011
RegCreateKeyEx() returned error 5, 'Access is denied.' (Source: MSSQLServer, Error number: 22002)
Get help: http://help/22002
Could not add article resolver 'Microsoft SQL Server Additive Conflict Resolver' information to the registry (Source: MSSQLServer, Error number: 21713)
Get help: http://help/21713
Could not register article resolver: 'Microsoft SQL Server Additive Conflict Resolver'. (Source: MSSQLServer, Error number: 21715)
Get help: http://help/21715
The system tables for merge replication could not be created successfully. (Source: MSSQLServer, Error number: 20008)
Get help: http://help/20008
I've tried to manually create it using the GUI and get an even stranger error message as follows:
TITLE: New Subscription Wizard
------------------------------
Microsoft SQL Server Management Studio is unable to access replication components because replication is not installed on this instance of SQL Server. For information about installing replication, see the topic Installing Replication in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.ReplUtilitiesErrorSR&EvtID=ReplicationNotInstalled&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Replication components are not installed on this server. Run SQL Server Setup again and select the option to install replication. (Microsoft SQL Server, Error: 21028)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21028&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I very obviously have replication installed by virtue of the fact that I have a publication and 16 subscriptions that are currently synchronizing. Any ideas?
My BIDS installation is able to create new projects and open saved ones, but if i try to add an existing package from a remote server, it throws the error pasted below. I can see the package list, but once i choose the package, hit ok, then hit ok to load it, I get the error. I can open the same package on a different computer, so it's not user rights related. Below the error is version info. Thanks in advance for any help you might be able to give!
===================================
One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.
(Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.LoadFromSqlServer(String packagePath, String serverName, String serverUserName, String serverPassword, IDTSEvents events)
at Microsoft.DataTransformationServices.Controls.PackageProtectionUtils.<>c__DisplayClassa.<LoadPackageFromSql>b__9(String password, IDTSEvents events)
at Microsoft.DataTransformationServices.Controls.PackageProtectionUtils.LoadPackageWithPassword(PackageLoader loader, IWin32Window dialogParent, String& packagePassword)
at Microsoft.DataTransformationServices.Controls.PackageProtectionUtils.LoadPackageFromSql(String packagePath, String server, String sqlUserName, String sqlServerPassword, IWin32Window dialogParent, String& packagePassword)
at Microsoft.DataTransformationServices.Controls.PackageLocationControl.LoadPackage(String& packagePassword)
at Microsoft.DataTransformationServices.Project.Controls.AddExistingPackageForm.AddExistingPackage()
at Microsoft.DataTransformationServices.Project.Controls.AddExistingPackageForm.AddExistingPackageForm_FormClosing(Object sender, FormClosingEventArgs e)
===================================
One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadFromSQLServer(String bstrPackagePath, String bstrServerName, String bstrServerUserName, String bstrServerPassword, Boolean bLoadNeutral, IDTSEvents90 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.LoadFromSqlServer(String packagePath, String serverName, String serverUserName, String serverPassword, IDTSEvents events)
Microsoft Visual Studio 2005
Version 8.0.50727.42 (RTM.050727-4200)
Microsoft .NET Framework
Version 2.0.50727
Installed Edition: IDE Standard
Microsoft Visual Studio 2005 Tools for Applications
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.3042.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.3042.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.3042.00
I am writing the following code in my SSIS 2012 script task.I am deliberately trying to fali this code by adding some typos in the connection string.I want to catch the exception and display the exact exception message.but SSIS runtime is always throwing same error message as follows:
Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Below is the code
public void Main()
{
//TODO: Add your code here
try
{
SqlConnection conn = new SqlConnection("Data Source=apsed1674;Integrated Security=true;database=EDX");
[Code] ....
I created an Image for the Database in sqlserver 2000. When I am querying directly the database as "Select * from employee", it is returning the result set.
But, when I am querying Database image with same query. It is giving error
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'Employee'
It is expecting the Database Owner. If I do query like "Select * from [Owner].employee", it is working fine.
My requirement is not use owner in queries, it should be simple query ("Select * from employee").
Can any one, help me out.
Thanks in advance.
Bhupesh
Hi,
I developed a custom data flow task in .net 2.0 using Visual Studio 2005. I installed it into GAC using GACUTIL and also copied it into the pipeline directory. This task runs absolutely fine when I run it on my local machine both in BIDS and using the script in windows 2000 environment. However, when I deployed this package into a windows 2003 server, the package fails at the custom task level. I checked the GAC in windowsassembly directory and it is present. Also I copied the file into the PipeLine directory and verified that I copied it into the correct pipeline directory by checking the registry. The version of the assembly is still Debug. I looked up documentation in MSDN but there is very little information about the errors I am seeing.
The error I get is pasted below, Can somebody please help me as I am currently stuck and running out of ideas to fix this problem.
Code: 0xC0047067
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: The "component "_" (2546)" failed to cache the component metadata object and returned error code 0x80131600.
Code: 0xC004706C
Source: DFT Raw File DFT Raw File (DTS.Pipeline)
Description: Component "component "_" (2546)" could not be created and returned error code 0xC0047067. Make sure that the component is registered correctly.
I am trying to send some data back to our as/400 from SQL server. Before I do so I need to delete entries from the table. I have an odbc connection set up and have used it sucessfully in a datareader compoenent but but when I try to use it for a delete SQL task it give me the followign error. what am I doing wrong? I even tried hardcoding in the system name/library name.
Here is my delete sql script
DELETE FROM DSSCNTL Where Companycode = 10
TITLE: SQL Task
------------------------------
Object reference not set to an instance of an object.
------------------------------
BUTTONS:
OK
------------------------------
Guys, I need your help on this one. I have a problem here. There is an exception on my conn.Open.
It said that "SQL Exception was unhandled by user code. Cannot open database requested in login 'MUSIC STORE'. Login fails.Login failed for user 'IT785P13student'."
Does anyone have any idea what this means?
I downloaded a web site from internet and tried to open it in visual web developer express edition but it gave an error and the code and the error was:
CODE- Return CType(Me.GetPropertyValue("Theme"),String)
ERROR -An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
An answer will be very good for me
Hi - I am new to *** forum and could really use some help. I am trying to insert the following values in an sql server 2003 database and I get an exception labeled:System.Data.SqlClient.SqlException: Incorrect syntax near ')'. Source:Line 91: connection.Open();Line 92: int numRowsAffected;Line 93: numRowsAffected= command.ExecuteNonQuery();Line 94: connection.Close();Line 95: Stack Trace:[SqlException (0x80131904): Incorrect syntax near ')'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +95 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +82 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3244 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +186 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1121 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +334 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +407 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +149 _Default.Button1_Click(Object sender, EventArgs e) in e:Hampton DirectWebsitesLunchOrderRestaurantEditor.aspx.cs:93 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +96 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +116 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +72 Source Code: SqlConnection connection = new SqlConnection(ConfigurationManager.ConnectionStrings["LunchOrderTestDBConnectionString1"].ToString());SqlCommand command = new SqlCommand("INSERT INTO Restaurants (Name,Address1,Phone,Fax,Menu_Pages,) VALUES ( @Name,@Address1,@Phone,@Fax,@Menu_Pages)", connection); //@MenuSqlParameter param0 = new SqlParameter( "@Name", SqlDbType.VarChar,50 );param0.Value = TextBox1.Text;command.Parameters.Add( param0 );SqlParameter param1 = new SqlParameter("@Address1", SqlDbType.VarChar, 50);param1.Value = TextBox2.Text;command.Parameters.Add(param1);SqlParameter param2 = new SqlParameter("@Phone", SqlDbType.VarChar, 50);param2.Value = TextBox3.Text;command.Parameters.Add( param2 );SqlParameter param3 = new SqlParameter("@Fax", SqlDbType.VarChar, 50);param3.Value = TextBox5.Text;command.Parameters.Add(param3);//SqlParameter param4 = new SqlParameter("@Menu", SqlDbType.Image);//param4.Value = byte_data;//command.Parameters.Add(param4);SqlParameter param5 = new SqlParameter("@Menu_Pages", SqlDbType.Int, 50);param5.Value = Int32.Parse(TextBox6.Text);command.Parameters.Add(param5);connection.Open();int numRowsAffected;numRowsAffected= command.ExecuteNonQuery();connection.Close();Thank You in advance for all help and suggestions!
View 1 Replies View RelatedI am trying to insert data into a table and I am getting a SQL Exception: System.Data.SqlClient.SqlException {"Incorrect syntax near 'nvarchar'. Must declare the scalar variable "@"."}
This is my subroutine that is executed once the submit button is clicked.
Please advise. Thank you for your time!
1 Protected Sub SubmitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
2 Dim CMLdataSource As New SqlDataSource()
3 Dim commStr As String
4
5 CMLdataSource.ConnectionString = ConfigurationManager.ConnectionStrings("CMLConnectionString1").ToString()
6
7 CMLdataSource.InsertCommandType = SqlDataSourceCommandType.Text
8 commStr = "INSERT INTO SCOs (ProjCode, SCONum, SCORev, DateIssued, DateAssigned, ProjName, CSCI, Description, [IDENT NUMBER], REV, PPRChgAbstract, SourceCodeChange, DocumentChange, "
9 commStr = commStr & "DocChangeRev, ChangeNoticeNum, TechInvest, CDMRep, TestEngineer, SQE, SCCBChair, CDMLibrarian, ECPNum, [CLASS 1], [CLASS 2]) "
10 commStr = commStr & "VALUES (@ProjCode, @SCONum, @SCORev, @DateIssued, @DateAssigned, @ProjName, @CSCI, @Description, @[IDENT NUMBER], @REV, @PPRChgAbstract, @SourceCodeChange, @DocumentChange, "
11 commStr = commStr & "@DocChangeRev, @ChangeNoticeNum, @TechInvest, @CDMRep, @TestEngineer, @SQE, @SCCBChair, @CDMLibrarian, @ECPNum, @[CLASS 1], @[CLASS 2])"
12
13 CMLdataSource.InsertCommand = commStr
14
15 CMLdataSource.InsertParameters.Add("ProjCode", CodeList.Text)
16 CMLdataSource.InsertParameters.Add("SCONum", scoNum.Text)
17 CMLdataSource.InsertParameters.Add("SCORev", ScoRevTextBox.Text)
18 CMLdataSource.InsertParameters.Add("DateIssued", DateIssuedTextBox.Text)
19 CMLdataSource.InsertParameters.Add("DateAssigned", DateAssigTextBox.Text)
20 CMLdataSource.InsertParameters.Add("ProjName", ProjectList.Text)
21 CMLdataSource.InsertParameters.Add("CSCI", CsciTextBox.Text)
22 CMLdataSource.InsertParameters.Add("Description", MediaTextBox.Text)
23 CMLdataSource.InsertParameters.Add("[IDENT NUMBER]", IDTextBox.Text)
24 CMLdataSource.InsertParameters.Add("REV", RevTextBox.Text)
25 CMLdataSource.InsertParameters.Add("PPRChgAbstract", PPRTextBox.Text)
26 CMLdataSource.InsertParameters.Add("SourceCodeChange", SourceCodeTextBox.Text)
27 CMLdataSource.InsertParameters.Add("DocumentChange", DocTitleTextBox.Text)
28 CMLdataSource.InsertParameters.Add("DocChangeRev", RevLetterTextBox.Text)
29 CMLdataSource.InsertParameters.Add("ChangeNoticeNum", ChangeNoticeTextBox.Text)
30 CMLdataSource.InsertParameters.Add("TechInvest", TechInvestTextBox.Text)
31 CMLdataSource.InsertParameters.Add("CDMRep", SwCdmTextBox.Text)
32 CMLdataSource.InsertParameters.Add("TestEngineer", TestEngTextBox.Text)
33 CMLdataSource.InsertParameters.Add("SQE", SqeTextBox.Text)
34 CMLdataSource.InsertParameters.Add("SCCBChair", SccbChairTextBox.Text)
35 CMLdataSource.InsertParameters.Add("CDMLibrarian", CdmLibTextBox.Text)
36 CMLdataSource.InsertParameters.Add("ECPNum", EcpNumTextBox.Text)
37 CMLdataSource.InsertParameters.Add("[Class 1]", Class1TextBox.Text)
38 CMLdataSource.InsertParameters.Add("[Class 2]", Class2TextBox.Text)
39
40 Dim RowsAffected As Integer = 0
41
42 Try
43 RowsAffected = CMLdataSource.Insert()
44 Catch ex As Exception
45 CMLdataSource = Nothing
46 Server.Transfer("dberror.aspx")
47 Finally
48 CMLdataSource = Nothing
49 End Try
50
51
52 If RowsAffected <> 1 Then
53
54 Server.Transfer("dbError.aspx")
55
56 Else
57 Server.Transfer("newConfirm.aspx")
58
59 End If
60
61
62 End Sub
Could somebody please tell me what is wrong with this SQL Statement. I'm trying to run it in SQL Server 2000, and keep getting the error:
System.Data.SqlClient.SqlException: Incorrect syntax near the keyword 'GROUP'
but as far as I can see, there isn't anything wrong near "GROUP"..." SELECT b.ColorID, b.ColorName, " +
" MAX(a.ColorID) AS DesignerProductAvailability_ColorID, " +" MAX(a.Quantity) AS DesignerProductAvailability_Quantity, " +
" MAX(a.ProductID) AS DesignerProductAvailability_ProductID " +" FROM DesignerProductAvailability a " +
" INNER JOIN ColorList b " +" ON b.ColorID = DesignerProductAvailability_ColorID " +
" WHERE DesignerProductAvailability_ProductID = @ProductID AND " +" DesignerProductAvailability_Quantity > 0 " +
" ORDER BY b.ColorName ASC " +
" GROUP BY b.ColorName ";
Any help would be greatly appreciated. Thanks in advance!
I am passing the values to a class which has a method to insert the date into database. How to retrive this exception thrown in this method and disply to user.
View 10 Replies View RelatedWe have load-balanced sql server mcs and users will be accessing all the time. We are maintaining user profiles in one mc. Here is the problem. We have a sp which reads profile from one particular mc always. If the mc is down, the sp does not fail gracefully. Instead it causes exception. Is there a way to access sql servers alternatively ie if one server is not responding read data from another sql?
View 1 Replies View RelatedHi all,
I am using MSSQL Server 8.0 , and the driver jtds.jar to connect the database for SQL operation .
I can do all the sql operation .
But after the creation of a trigger for a table , I used the same java program to insert rows into table .
-------The java code I used ---------------------
String connectionString = "jdbc:jtds:sqlserver://localhost:1433/master";
try {
Class.forName(jdbcDriverClass);
Connection con = DriverManager.getConnection(connectionString,userN ame,password);
Statement st = con.createStatement();
String query = "insert into tabname values('11','ROBERT')";
st.executeUpdate(query);
} catch (Exception e) { e.printStackTrace(); }
-------------------------------------------------
and got the exception
////////////////////////////////////////////////////////
java.sql.SQLException: executeUpdate can't return a result set
at net.sourceforge.jtds.jdbc.TdsStatement.executeUpda te(Unknown Source)
////////////////////////////////////////////////////////
What will be the problem here ?
Is it bcos of any time out ?
Please help !!!
Thanks
I already added the the COM Component: Microsoft ADO ext. 2.8 for DLL and Security
Dim jro1 As JRO.JetEngine
jro1 = New JRO.JetEngine
jro1.CompactDatabase("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C: estDB.mdb;Jet OLEDB:Database Password=test", _
"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Backup estDB.mdb;Jet OLEDB:Engine Type=4;Jet OLEDB:Database Password=test")
Error:
Retrieving the COM class factory for component with CLSID {DE88C160-FF2C-11D1-BB6F-00C04FAE22DA} failed due to the following error: 8007007e.
I have just recovered data from a hard drive crash. I installed a fresh copy of Windows Server 2003 with sp2. Have SQL Standard Running with sp2, and VS 2005 standard running sp1.
I have several webs on this server, was able to get most up and running fine, but one web and database cannot make the connection after recovery. I had to reapply permissions and folder security to all webs, and change provided dbo privaledges to network_services. However I am still getting the following error:
Server Error in '/bpe' Application.--------------------------------------------------------------------------------
The EXECUTE permission was denied on the object 'aspnet_CheckSchemaVersion', database 'Fitness1stDb', schema 'dbo'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'aspnet_CheckSchemaVersion', database 'Fitness1stDb', schema 'dbo'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): The EXECUTE permission was denied on the object 'aspnet_CheckSchemaVersion', database 'Fitness1stDb', schema 'dbo'.] System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857354 System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734966 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +149 System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +886 System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +132 System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +415 System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +135 System.Web.Util.SecUtility.CheckSchemaVersion(ProviderBase provider, SqlConnection connection, String[] features, String version, Int32& schemaVersionCheck) +367 System.Web.Security.SqlMembershipProvider.CheckSchemaVersion(SqlConnection connection) +85 System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105 System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42 System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83 System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160 System.Web.UI.WebControls.Login.AttemptLogin() +105 System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99 System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35 System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
--------------------------------------------------------------------------------Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
What procedure should I follow to fix this issue?