'clr Enabled' Does Not Exist
Feb 15, 2008
I execute the following:
-- Turn on advanced options
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
-- turn on clr
sp_configure 'clr enabled', 1
GO
RECONFIGURE;
GO
and get this error:
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 78
The configuration option 'clr enabled' does not exist, or it may be an advanced option.
When I run surface area config, I select Configuration for Features, but under MSSQLSERVER, I do not see the entry for Database Engine that should have the CLR Integration under it.
Any suggestions? Thanks in advance.
View 5 Replies
ADVERTISEMENT
Dec 3, 2013
I have data as below: select ID,code,go,back from tableA
ID code go back
2 C US UK
2 A UK US
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
I only want to pull out whole ID group which code Z exist. I tried as below:
select ID,code,go,back from tableA A
where exists
( select ID,go,back
from tableA B with (nolock)
where A.ID = B.ID
and A.code='Z')
But it only appear:
ID code go back
1 Z UK US
How can I appear with the group as well?
ID code go back
1 A US UK
1 Z UK US
1 C UK US
1 A US UK
View 3 Replies
View Related
Nov 24, 2005
Hello all,
I have a branch a data, now i need to search through a database to check whther it is exist in that database or not, any syggestion?
Example:
Now i have data 123, 234, 345. Let say data 123 and 234 is exist in that database, but data 345 is not exist in that database.
What SQL am i suitable to use to get those result exist(123, 234) and those result not exist (345)?
The database structure is someting like this:
ID NAME O_NAME
-- ----- --------
1 120 123
2 234 234
3 345 345
1) The data consider 'exist' if it exist in column NAME or column O_NAME (either one).
2) The data consider 'not exist' if it not exist in neither NAME column nor O_NAME column
After the SQL query, someting is expected:
Exist:
ID NAME O_NAME
-- ----- --------
1 120 123
2 234 234
Not Exist:
ID NAME O_NAME
-- ----- --------
3 345 345
I'll appreciate if anyone can provide me a solution..Thanks!
View 3 Replies
View Related
Nov 4, 2005
Can anyone tell me what this means and how to fix it? I created a stored procedure in VS2005 and did a build. When I went to SQL Server there was the stored procedure but when I run it I get the error....
View 24 Replies
View Related
Jun 11, 2007
Hi All,
When i run the command,
use master
go
sp_configure 'awe enabled',1
go
reconfigure
go
I got the output,
name : awe enabled
minimum: 0
Maximum: 1
config_value: 0
run_value: 0
From the value of config_value ,it mean that the "awe" is not enabled.
But, when we see the System Configuration:
OS --- Win 2003 Standard sp1
Sql server 2005 sp1 ( I have only one instance )
System configuration = 3.83 GB of RAM
The total is 3.83GB of RAM, but When i right click the sql server
instance , select 'Properties' and then on the 'General' tab , i
see 'Memory' assigned to that instance as = 3927 (MB)
Does this mean that, someone already has enabled AWE option. That's
the reason its showing memory = 3927 MB. (or) i have to enable it
externally.
Can someone reply as soon as possible plz.
Thanks.
View 4 Replies
View Related
Dec 3, 2007
now i have enabled awe in sqlserver 2005.And i set the LOCK PAGE IN MEMORY in group policy.but while i see the sqlserver agent log ,i find that the log shows 4 processor(s) and 4096 MB RAM detected,in fact my server have 8GB RAM.so anyone can help me ?Thanks
i have see the sqlserver log ,and find awe enabled
View 6 Replies
View Related
Feb 15, 2002
I've looked in several books in addition to the online SQL Server documentation, and I can't find a way to determine whether or not a trigger is enabled or disabled. I know how to enable/disable, I just can't figure out the current status of the trigger. It's not returned in sp_help or sp_helptrigger, and there's no indication in Enterprise Manager of a trigger's status. Does anyone out there know how to do this?
View 1 Replies
View Related
Feb 3, 1999
I'm tryng to restore a single table (12000 records) from a database backup, but during the restore process I receive the message :
DBProcess is dead or not enabled.
If I try to restore a smaller table (9000 record) there is no problem.
Any idea?
Thanks!
View 1 Replies
View Related
Jul 24, 2000
Hi,
I'm using SQL Server 7.0. I'd like to know if there is anywhere in the information schema or system tables where I can tell that a constraint has been flagged as 'enable constraint for INSERT AND UPDATE' or not.
Thanks in advance,
Darrin
View 1 Replies
View Related
Jan 6, 2005
Hi,
While reading (I have come across what seems to be maybe a powerful and useful feature) available in MSAS and thus this related question:
Can someone briefly explain the use of this feature and how it can come in handy.
So far I have skimmed through BOL and it says that "Only parent-child dimensions support this dimension characteristic" i.e. Write-enabled feature.
Thanks.
View 2 Replies
View Related
Apr 25, 2007
Hi,
I tried to run the following script from SQL2005 server A (publisher) from Database 'TestDB' to SQL2005 server B
(subscriber) database 'TestDB'
-------------------------------------------
exec sp_addsubscription @publication = N'publish_TestDB_FromCA', @subscriber = N'subscriberTest', @destination_db = N'TestDB', @subscription_type = N'Push', @sync_type = N'automatic', @article = N'all',
@update_mode = N'read only', @subscriber_type = 0
with following error:
Msg 14013, Level 16, State 1, Procedure sp_MSrepl_addsubscription, Line 252
This database is not enabled for publication.
Any idea?
Thanks
David
View 14 Replies
View Related
Aug 18, 1998
Hello,
Can anyone help me how to solve this problem ?
I had message "DBPROCESS is dead or not enabled" from my Server SQL v.4.2.1b.
I hope anyone want to help me.
Regards,
Susan
View 3 Replies
View Related
Jun 21, 2004
If TCP/IP is the only protocol enabled on the General tab of the Client Network Utility, does it mean that other protocols are disabled and will not be used in communicating to SQL Servers on other machines?
In this case, should the registry HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServer ClientSuperSocketNetLib only contain the Tcp entry?
If I have alias setup to use other protocol such as Named Pipes, does it mean that the alias cannot be connected since Named Pipes is not enabled?
Thank you for any help.
View 10 Replies
View Related
Jul 21, 2004
I have a VB6 application from which I want to create and schedule a jobs. The individual jobs should run once and be deleted when succesfully finished. Almost everything works fine. But enabling the jobschedule won't work. In the sp below I set the @enabled parameter of sp_add_jobschedule to 1 (is also default) which should indicate that the schedule is enabled. How to fix this, or what I am doing wrong? I tried to place an execute sp_update_jobschedule at the end of the sp, but no effect at all.
CREATE PROCEDURE mis_CreateCustomJob (
@strUserName varchar(50),
@strDateTimeStamp varchar(14),
@strJobType varchar(10),
@intDate int,
@intTime int
)
AS
BEGIN TRANSACTION
DECLARE @JobID BINARY(16)
DECLARE @JobName VARCHAR(67)
DECLARE @ReturnCode INT
SELECT @JobName = 'jb_' + @strUserName + @strDateTimeStamp
SELECT @ReturnCode = 0
BEGIN
-- Add the job
DECLARE @strDescription VARCHAR(100)
SELECT @strDescription = 'Job aangemaakt met MUC door ' + @strUserName
EXECUTE @ReturnCode = msdb.dbo.sp_add_job
@job_id = @JobID OUTPUT ,
@job_name = @JobName,
@owner_login_name = N'Admin',
@description = @strDescription,
@category_name = N'[Uncategorized (Local)]',
@enabled = 1,
@notify_level_email = 0,
@notify_level_page = 0,
@notify_level_netsend = 0,
@notify_level_eventlog = 2,
@delete_level= 1
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
-- Add the job steps
DECLARE @strCommand varchar(100)
SELECT @strCommand = 'SET ANSI_NULLS ON' + char(13) + 'SET ANSI_WARNINGS ON' + char(13) + 'go ' + char(13) + char(13) + 'exec mis_JobTest'
EXECUTE @ReturnCode = msdb.dbo.sp_add_jobstep
@job_id = @JobID,
@step_id = 1,
@step_name = N'Upload Contracttabellen',
@command = @strCommand,
@database_name = N'mis',
@server = N'',
@database_user_name = N'',
@subsystem = N'TSQL',
@cmdexec_success_code = 0,
@flags = 0,
@retry_attempts = 0,
@retry_interval = 1,
@output_file_name = N'',
@on_success_step_id = 0,
@on_success_action = 1,
@on_fail_step_id = 0,
@on_fail_action = 2
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
EXECUTE @ReturnCode = msdb.dbo.sp_update_job @job_id = @JobID, @start_step_id = 1
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
-- Add the job schedules
EXECUTE @ReturnCode = msdb.dbo.sp_add_jobschedule
@job_id = @JobID,
@name = N'HandmatigeUpload',
@enabled = 1,
@freq_type = 1,
@active_start_date = @intDate,
@active_start_time = @intTime
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
-- Add the Target Servers
EXECUTE @ReturnCode = msdb.dbo.sp_add_jobserver
@job_id = @JobID,
@server_name = N'(local)'
IF (@@ERROR <> 0 OR @ReturnCode <> 0) GOTO QuitWithRollback
END
COMMIT TRANSACTION
GOTO EndSave
QuitWithRollback:
IF (@@TRANCOUNT > 0) ROLLBACK TRANSACTION
EndSave:
GO
View 3 Replies
View Related
Jan 16, 2007
Just curious to hear if anyone else has experiences this or knows a reason
why it maybe should be this way...
I have some jobs that are disabled accourding to the Job Activity Monitor view in Mgmt Studio. However, if I open the schedules details, this view says Enabled. Can a schedule be enabled for a job, even if the job in itself is
disabled maybe?
But, I can't see any enable/disable flag in the sysjobschedules table,
only in sysjobs.
View 2 Replies
View Related
May 28, 2008
We are running application on Ms SQL Server connecting to PowerBuilder 7.0.3, using MSS Microsoft SQL Server 6.X driver.
We have recently migrated the SQL Server from 2000 to 2005 SP2, in which databases are still at compatability level 80.
The application runs perfectly for one week, but later we received some occassional reports from users that database connection breaks after a
certain idle period. Below are the errors, usually error 1 appears before error 2.
Error 1
A database error has occured.
Database error code: 10025
Database error message:
Select error: Possible network error: Write to SQL Server Failed. General network error. Check your documentation.
Error 2
A database error has occured.
Database error code: 10005
Database error message:
Select error: DBPROCESS is dead or not enabled.
We couldn't find any related errors in the SQL Server log. Does anyone has the idea of what's wrong or how to trace the connection brokerage?
View 3 Replies
View Related
May 2, 2008
Is it possible to check if xp_cmdshell is enabled on a server or not? (Using T-SQL*)
How would you perform this check?
View 7 Replies
View Related
Mar 13, 2008
I am trying to mirror a database and I keep getting the error Msg 1469 saying that "Database mirroring cannot be enabled because the database is an auto close database on one of the partners. Well.. the database properties is saying "false" under auto-close. What else could be wrong?
View 12 Replies
View Related
Dec 20, 2006
Hello,
I've been trying for two days now to get SQL Cache Dependencies to work. So far, nothing has worked, and I have been around the block a few times now on this one. So now I'm going back to basics, as I think my code and queries are fine. My first question is how to confirm that I have a Service Broker that is up and running. I am using SSX as my database engine. Other posts mention how the "look at the service broker folder", and I don't see a folder anywhere. Can someone tell me what to look for? I've added various SP's based on tutorials on web sites, so I can't tell if those SP's are mine or theirs at this point (I've been at this too long). Where is the "folder" the other posts have mentioned? Do I need to do anything special to get it? Did I install all the right files?
Mike
View 9 Replies
View Related
May 29, 2007
Hi All,
I noticed recently that the setting for "Write Cache Enable" for the disk drives is enabled. Can anybody help me out with what is this "Write Cache Enabled" Setting and what might be the consequences of keeping it enabled on a SQL Server production Machine. What performance gains can we have by turning the feature off. Can anybosy please suggest and article for the Same topic
thanks in Advance
Jacx
View 4 Replies
View Related
Feb 8, 2007
I've Created a DLL Library and added it as an assembly in a database when I make a select statement from SQLCmd using my functions it runs fine but when I try to Create View from the VB 2005 Express Development Environment it Gives me the Error
SQL Execution Error
Error Message: Execution of user code in the .net Framework is disabled. Enable "clr Enabled" configurartion option
note that CLR Integration Option of the SQL server is ON and I've Tried sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'clr enabled', 1;
GO
RECONFIGUREform SQLCMD in vainwhen I execute the select statement from the SQLcmd it runs fine but when I try to make a View from the Developmet Environment i gives me that error Please Help
View 6 Replies
View Related
Jun 2, 2007
Does annybody know how I can chance de User Instance to True.
I don't mean chanching it in web.config but by the SQL Server 2005 configuration.
I try to add a database to my project but i get the following message.
Generating user instance in SQL Server is disabled. Use sp_configure 'user instance enabled' to generate user instance.
Thanks for responding.
Erich.
View 1 Replies
View Related
Apr 4, 2007
Hi,
I'm using bcp and sqlcmd against SQL 2005 engine. They both work fine for long periods of time, but every few days they stop working with an error something like this:
A connection could not be establed - actively refused - this might be because remote connections are not allowed or the named pipes protocol is not enabled.
The thing is, remote connections ARE allowed, and named pipes ARE enabled. I have to recycle the SQL serverice to make it start working again.
Here are the commands that stop working.
sqlcmd -Ulowcostbuy -Plcb01 -S127.0.0.1 -id:homeWeBuysql runcate_bid_request.sql
bcp low_cost_buy..bid_request in d:homeWeBuyuploadunzipped
equest.dat -S127.0.0.1 -Ulowcostbuy -Plcb01 -fd:homeWeBuyformatsid_request_in.fmt -ed:homeWeBuylogid_request_in.err
Another note: sql is listening on port 1737, not the standard 1433 (or whatever it is).
Can anyone please help!? This is a very high profile application; having it die every few days is NOT an option!!
View 2 Replies
View Related
May 6, 2007
HiI'm having no end of problems with Visual Web Developer and SQL Server 2005 Express Edition.
View 1 Replies
View Related
Sep 1, 2007
I am getting a reference problem in APP_Code when I am creaing LinQ enabled website. When I am creating LinQ enabled website at that time it adds some dll like System.Query, System.Data.DLinq, System.Xml.XLinq and in web.config file it adds
<system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharp3CodeProvider, CSharp3CodeDomProvider"/> </compilers> </system.codedom>
automatically. Now the problem is when I add references like System.Query it does not show the Query namespace (It does not show any of the external dll added in the bin folder). And if we comment the
<system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharp3CodeProvider, CSharp3CodeDomProvider"/> </compilers> </system.codedom>
in web.config file it works properly that means it shows System.Query and other refrences.
Please if there is any solution do reply,
Thank You..
View 1 Replies
View Related
Feb 27, 2008
Hello
I am using
I created sqldata source, tables and also a gridview.
I am using sql server express with prof VS 05.
I CANNOT USE the executable aspnet_regiis.exe on SQL server express.( you need the full version)
I get the error"Debugging failed because integrated windows authentication is not enabled"
gino
View 2 Replies
View Related
May 9, 2008
I´m trying to enable full-text indexing in SQL Server Management Express 2005.
I can see the option is there (Database name - Properties - Files), but the options is blurred and I´m not able to select it.
How do I solve this problem?
Getting desperate trying now...
View 2 Replies
View Related
Mar 17, 2004
I am unable to access the default port 1433 on my SQL 2003 server. There is no firewall. I run telnet <ip> <port> and get "Connection failed" which explains my inability to connect to the server for weeks. I have being unable to connect to the server after I uninstalled sql 2000 and reinstalled it on my 2003 server. Some of the things I have checked is Network Configuration in EM. Named Pipes and TCP/IP is installed with port set to 1433. HKLMSoftwareMicrosoftMSSQLServerClientSuperSocketNetLibTcpDefaultPort port is set to 1433. Is there anything I need to configure on the server side to have the default sql server port enabled.
Thanks
View 2 Replies
View Related
Jan 25, 2002
We have bulk copy option enabled for our DB and we really use it. Will it be possible to set up a snapshot replication over the Internet of particular tables to a remote server from which the data will be only retrieved and never changed? Also, is it necessary to have PKs in all tables for this one-way snapshot replication? (for transactional replication it is needed, as I know)
Thanks a lot!
Andy.
View 2 Replies
View Related
Jul 12, 2004
Hi all,
I am trying to get a MS Access Database to work on my companies intranet. Everything works fine on my laptop with local file paths. After transferring the files to the web server and changing file paths, I get the 2 following errors.
"Data provider could not be initialized"
"Not a valid file name"
I assume that I am having a problem relinking the database, but unsure of how to do this.
All help is greatly appreciated.
View 4 Replies
View Related
Mar 12, 2007
Hi, I'm having trouble with some SQL. I have a document table which links to a document version table. I'd like to write a query to get the latest enabled version of every document - a resultset with one row per document. Is this possible with resorting to a cursor?
CREATE TABLE tblDoc (
DocId int
)
GO
CREATE TABLE tblDocVersion (
DocVersionId int,
DocId int,
DateCreated datetime,
IsEnabled bit
)
GO
INSERT INTO tblDoc (DocId) VALUES (1)
INSERT INTO tblDoc (DocId) VALUES (2)
INSERT INTO tblDocVersion (DocVersionId, DocId, DateCreated, IsEnabled) VALUES (1, 1, '8/8/2006' , 1)
INSERT INTO tblDocVersion (DocVersionId, DocId, DateCreated, IsEnabled) VALUES (1, 1, '9/9/2006' , 1)
INSERT INTO tblDocVersion (DocVersionId, DocId, DateCreated, IsEnabled) VALUES (1, 1, '10/10/2006' , 0)
INSERT INTO tblDocVersion (DocVersionId, DocId, DateCreated, IsEnabled) VALUES (1, 2, '8/8/2006' , 1)
INSERT INTO tblDocVersion (DocVersionId, DocId, DateCreated, IsEnabled) VALUES (1, 2, '11/11/2006' , 1)
Desired output:
DocId DocVersionId DateCreated
============================
1 2 9/9/2006
2 5 11/11/2006
Thanks!
MrsM
View 6 Replies
View Related
Jul 16, 2015
We have a server with a database with filestream enabled. The filestream data is in a filegroup with three files spread across 3 LUNs F:, G:, and H: each with a capacity of 1.8 TB.
The file stream containers in those three LUNs reference the same column in the same table.
The F: Drive has only 64 GB free space left. The H: However has around 700 GB free.
We are looking to move some filestream content from the container in F: to the container in H:.
View 2 Replies
View Related
Mar 6, 2006
How to check if DB Constraints are enabled in a database?
View 6 Replies
View Related