[22003][0][Microsoft][ODBC SQL Server Driver]Numeric Value Out Of Range
Jul 23, 2005
Hi,
I have a php application connected through odbc to a sqlserver database.
When I try to execute select queries on a smalldatetime table field I
receive this message:
Warning: [22003][0][Microsoft][ODBC SQL Server Driver]Numeric value out of
range
The query is something like:
select dateField from table
Tha field is a normal smalldatetime one:
10/17/2001 12:35:00 PM
Whith Query Analyzer the query works fine.
I'm using php mssql_query() and ODBTP as protocol to connect to the DBMS
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application. --------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup ------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
I am getting the below error when I try to access the table in 2005 database through 3rd party application from the application server.
“[Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt�
This database was restored from sqlserver 2000, so the ODBC connection in the application server first was pointing to 2000 database and now its dropped and recreated to point to the 2005 database.
I dont get this error message when I do the same action from my pc.
I google'd on this error message, and I am not sure if the driver has to be upgraded or if there is anything else that I am missing here.
I am running a query which pulls back about 200,000 records.
When I run this in ISQL (SQL Server 6.5), it runs in almost 2 minutes. When I put it in a store procedure and run it off my ASP application, I get this error
[Microsoft][ODBC SQL Server Driver]Timeout Expired
We've tried many things including: 1) Increased connection and command time outs in Global ASA 2) Have the ODBC driver log long Quires to a file 3) Changed Query Time out in Enterprise Manager(360 seconds) Go to tools --> Preferences/configure -->Connection Tab 4) Changed Maximum allowed open database from 20 to 200 5) Changed resource timeout to 360 seconds from 5 seconds 6) Changed remote query timeout to 0, allowing infinite wait.
I inherited some really twisted asp pages from another developer that crank for a long time. They used to work, albeit slowly. Now when I try to run one I get the error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e31'
[Microsoft][ODBC SQL Server Driver]Timeout expired
Short queries run fine.
IIS4 & SQL Server are on the same box. I didn't the ASP pages or the IIS or SQL server config. I did install VStudio 6.0 a while back.
Thank you to all who reply to this perplexing question. Mike
Database VMFGSRVRVMFG is SQL 2000 Std. Database NT002P_GL is SQL 7.0. All SQL versions are at the current SP levels.
I receive the timeout message when I am in EM, database,VMFG(database), Views, Open View, Return All Rows. I can successfully run the code in QA. I believe I am running up against a time parameter in SQL Server. I have reviewed all time parameters that I can find. However, I still receive the error. What parameters should I be looking at? I am attempting to create a view with the following code: -------------- CREATE view uv_olap_adj_co_profit as select customer.id as customer_number, customer.name as customer_name, customer_order.salesrep_id as salesperson, isnull(customer.country, 'USA') as country, '7' as business_unit, customer_order.order_type as order_type, uv_olap_co_profit.customer_order, uv_olap_co_profit.work_order, uv_olap_co_profit.close_date, uv_olap_co_profit.period_year, uv_olap_co_profit.gl_period, isnull((uv_olap_co_profit.billing + ut_man_adj.billing) *ut_fin_adj.billing, uv_olap_co_profit.billing*ut_fin_adj.billing) as billing, isnull((uv_olap_co_profit.material_cost + ut_man_adj.material)*ut_fin_adj.material, uv_olap_co_profit.material_cost*ut_fin_adj.materia l) as material, isnull((uv_olap_co_profit.labor_cost + ut_man_adj.labor) *ut_fin_adj.labor, uv_olap_co_profit.labor_cost*ut_fin_adj.labor) as labor, isnull((uv_olap_co_profit.burden_cost + ut_man_adj.burden) *ut_fin_adj.burden, uv_olap_co_profit.burden_cost*ut_fin_adj.burden) as burden, uv_olap_co_profit.service_cost as service from uv_olap_co_profit, ut_man_adj, ut_fin_adj, customer_order, customer where uv_olap_co_profit.customer_order *= ut_man_adj.cust_order_id and uv_olap_co_profit.work_order *= ut_man_adj.work_order and uv_olap_co_profit.period_year = ut_fin_adj.year and uv_olap_co_profit.customer_order = customer_order.id and customer_order.customer_id = customer.id and (customer_order.salesrep_id = 'LABELAIREP' or customer_order.salesrep_id = 'OMOHUNDR' or customer_order.salesrep_id = 'EGGERSR') union all select customer.id as customer_number, customer.name as customer_name, customer_order.salesrep_id as salesperson, isnull(customer.country, 'USA') as country, customer.user_2 as business_unit, customer_order.order_type as order_type, uv_olap_co_profit.customer_order, uv_olap_co_profit.work_order, uv_olap_co_profit.close_date, uv_olap_co_profit.period_year, uv_olap_co_profit.gl_period, isnull((uv_olap_co_profit.billing + ut_man_adj.billing) *ut_fin_adj.billing, uv_olap_co_profit.billing*ut_fin_adj.billing) as billing, isnull((uv_olap_co_profit.material_cost + ut_man_adj.material)*ut_fin_adj.material, uv_olap_co_profit.material_cost*ut_fin_adj.materia l) as material, isnull((uv_olap_co_profit.labor_cost + ut_man_adj.labor) *ut_fin_adj.labor, uv_olap_co_profit.labor_cost*ut_fin_adj.labor) as labor, isnull((uv_olap_co_profit.burden_cost + ut_man_adj.burden) *ut_fin_adj.burden, uv_olap_co_profit.burden_cost*ut_fin_adj.burden) as burden, uv_olap_co_profit.service_cost as service from uv_olap_co_profit, ut_man_adj, ut_fin_adj, customer_order, where uv_olap_co_profit.customer_order *= ut_man_adj.cust_order_id and uv_olap_co_profit.work_order *= ut_man_adj.work_order and uv_olap_co_profit.period_year = ut_fin_adj.year and uv_olap_co_profit.customer_order = customer_order.id and customer_order.customer_id
I've tried every websearch possible to try and get a solution for this problem but can't.
Development Software: SQL Server 2000 Enterprise Manager 8.0 Query Analyzer 8.00.194
Error: When I run a mildly complex view in Enterprise Manager I get the error:[Microsoft][ODBC SQL Server Driver]Timeout Expired after about 30 seconds.
When I copy and paste and run the exact same code in Query Analyzer the Query runs for longer than 30 seconds and runs until completion. Now my question is since this apparently seems to be an Enterpise Manager problem and not on the server end, where do I go in Enterprise Manager to change that setting? I've looked everywhere in Enterpise manager and can't find a "command timeout" setting.
Hello, I installed MS SQL Server 2000 Evaluation Edition on Windows XP Pro. I have database on the same PC. When I am running a query(view) from Query Analyser I get "[Microsoft][ODBC SQL Server Driver] Timeout Expired" error message . When I am running the same view on smaller amount of data it works.
I have tried updating the DSN configure option i.e. 30000 milliseconds.
But I am still facing the problem of Timeout Expired.
I am using sql server 2005 for daily importing data from Excel Dump Files into sql server table. Everyday the database gets updated. The Error mentioned in Subject normally gets once a month, due to daily updation of database whether each table structure gets changed like index, trigger, etc.
odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect
we got the error with access 2000 database and PHP as prog. language .
we created dsn for the connection.
reboot solves the problem. but we need another solution better than this.
All, I need a help from you all. I am getting this error if the users are running the application which is connecting from MSAccess97 to SQL Server 2000. Error: [Microsoft][ODBC SQL Server Driver]Communication link failure I would appreciate if you send me the resolution for this problem. Thanks, Reddy
I get the message Microsoft [ODBC Sql server driver]communication link failure error message in my VB 6 application with MSDE engine. This error does not happen often. My connection string is as below.
Several of our customers are getting a message intermitantly throughout the day where the connection is closed. The message being generated is [Microsoft][ODBC SQL Server Driver]Communication Link Failure.
These messages started in the last two weeks.
Thanks for any direction that can be thrown my way.
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Hi guys! I am using SQL 2005 and I wonder why I am encountering the error "[Microsoft][ODBC SQL Server Driver]Syntax error or access violation" everytime I am trying to create stored procedure with temp table and table variable. See my code below with temp table.
Any thoughts will be appreciated!
CREATE PROCEDURE DBO.SAMPLESP (@DETAILS AS VARCHAR(8000), @ID AS VARCHAR(15))
AS
BEGIN TRANSACTION
CREATE TABLE DBO.#TEMPTABLE { ASSET VARCHAR(50) }
DECLARE @INSTINSERT AS NVARCHAR(4000) SET @INSTINSERT= 'INSERT INTO #TEMPTABLE(ASSET)' SET @INSTINSERT= @INSTINSERT+ @DETAILS
EXEC sp_ExecuteSQL @INSTINSERT
INSERT INTO InstDetail (TrackNum, ASSETID) SELECT @ID, A.ASSE FROM #TEMPTABLE A
DROP TABLE #TEMPTABLE
IF @@ERROR != 0 BEGIN ROLLBACK TRANSACTION RAISERROR('There was an error in here', 11, 1) RETURN END ELSE COMMIT TRANSACTION
Help! I am bcp-ing in and out large amounts of data. It is a 2 column table, the 2nd column being a text field of length 16. In this text field is a large amount of XML data, about a page when I look at the text file. It has lots of text with lots of tags. It looks something like this "<Paper value = "hi" <!-- --> etc. etc".
I have no trouble BCP OUT but when I try to BCP IN, I get this error:
Starting copy... SQLstate = 22003, NativeError = 0 Error = [Microsoft][ODBC SQL Server Driver]Numeric value out of range SQLstate = 22003, NativeError = 0 Error = [Microsoft][ODBC SQL Server Driver]Numeric value out of range SQLstate = 22003, NativeError = 0 Error = [Microsoft][ODBC SQL Server Driver]Numeric value out of range SQLstate = 22003, NativeError = 0 Error = [Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification
Hello All,I am getting the following error when attemping to open a table inSQL2kSP3a.________________________________________SQL Server Enterprise ManagerDatabase Server: Microsoft SQL ServerVersion: 08.00.0760Runtime Error: [Microsoft][ODBC SQL Server Driver]Invalid time format_________________________________________I cannot find it in sysmessages, or on the web.Any ideas about how to resolve this? And how it occured...Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
recently, I use the following script(somebody else) to create a database on a remote server: the script is as follow: /*************************/ CREATE DATABASE [ErrorLog] GO
if not exists (select * from master.dbo.syslogins where loginname = N'ErrorLog') BEGIN declare @logindb nvarchar(132), @loginlang nvarchar(132) select @logindb = N'Navigator', @loginlang = N'us_english' if @logindb is null or not exists (select * from master.dbo.sysdatabases where name = @logindb) select @logindb = N'master' if @loginlang is null or (not exists (select * from master.dbo.syslanguages where name = @loginlang) and @loginlang <> N'us_english') select @loginlang = @@language exec sp_addlogin N'ErrorLog', 'secret', @logindb, @loginlang END GO
if not exists (select * from dbo.sysusers where name = N'ErrorLog' and uid < 16382) EXEC sp_grantdbaccess N'ErrorLog', N'ErrorLog' GO
Grant select, insert On Errors to ErrorLog /***************************/ in my *.asp program, I used the following string to connect to the database on the remote server. /******** con.open "dsn=ErrorLog;uid=ErrorLog;pwd=secret;" ********/ the following message comes up: /********/ Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E4D) [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'ErrorLog'. /*********/ what is the problem here? when I set up dsn ErrorLOG, I used "abc" userID and password "XXX" which is our server database administrator assigned to me. I tested connection in odbc, it is OK I just don't get, ther user ErrorLog already had login id and granted access to database errorlog. any clue, please help! Betty
when I was sending 50 simultaneous connections to the web services, I got these 2 errors: - "1[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. "
- "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)"
Everything worked fine if I ran 10 simultaneous connections. I am using Microsoft ACT to load test the web service. The database is SQL Server 2000. Any idea about why this is happening?
I am using PowerDesigner to reverse engineer a SQL 2000 database. I am getting the following error. I can't find out what this error means. Does anyone know?
Unable to list the users. [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. SQLSTATE =37000
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
Error Detail Records:
Error: 0 (0); Provider Error: 0 (0)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
