I am trying to execute a query on a table which is in 6.5 from 7.0
I get the following error...
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error.
[OLE/DB provider returned message: The catalog stored procedures installed on server WEB_SERVER are version 6.50.193; version 07.00.0330 or later is required to support IDBSchemaRowset. Please contact your system administrator.]
I am remotely logging onto a MS SQL 6.0 server using sp_addlinkedsrvlogin.
When I try to query against the table on this server I get the following error
message:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error.
[OLE/DB provider returned message: The data source can not be used, because it DBMS version is less than 6.5.0.]
I know that 6.0 doesn't support OLEDB but shouldn't 7.0 be able to access this
using odbc. Do I need to do anything other than set up the dsn on odbc.
Any feedback on this would be great.
Cheers,
bhanly@apcc.com
Window Server 2003 R2 Standard Edition (x64) SP1
Sql Server 2000 8.00.2039 SP4 Enterprise Edition (32 bit version)
A linked server is configured to a sql 2000 server and when I execute sql statement SELECT * FROM [LinkedServer].[Database].[dbo].[TableName] it gives following error message: -
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'SQLOLEDB' reported an error. The provider did not give any information about the error.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IUnknown::QueryInterface returned 0x80004005: The provider did not give any information about the error.].
In case if anyone has a solution to it, please let me know.
Hello,
I've found some strange behavior of SQLOLEDB provider. When I set "Preserve on Abort" on true and delete some row in transaction, I cannot see this row after transaction rollback. Is this correct?
My code:
Dim Conn As ADODB.Connection Dim recSet As ADODB.Recordset Dim cmd As ADODB.Command Dim c1 As Long, c2 As Long ' ## Open a connection Set Conn = New ADODB.Connection Conn.Open "Provider='SQLOLEDB';Integrated Security=SSPI;Data Source='PENASSQLEXPRESS';Initial Catalog='PokusDB';" ' ## Open a table Set recSet = New ADODB.Recordset '## Open cursor Set cmd = New ADODB.Command Set cmd.ActiveConnection = Conn cmd.Properties("Preserve on Abort") = True cmd.CommandText = "SELECT * FROM zkouska order by text" recSet.Open cmd, , adOpenStatic, adLockOptimistic, adCmdUnknown '## TransBegin Conn.BeginTrans '## CursorMove recSet.MoveFirst '## RecordDelete recSet.Delete adAffectCurrent recSet.Requery adOptionUnspecified '## TransAbort Conn.RollbackTrans '## CursorMove recSet.MoveFirst c2 = recSet.Fields("cislo").Value If c1 <> c2 Then Err.Raise 1000, "Transaction test failed" End If
When I call Requery after RollbackTrans everything is OK, but what is then "Preserve on Abort" for?
Also I must call Requery after delete or I will get an error after MoveFirst. Do I miss something?
Hello,
I've found some strange behavior of SQLOLEDB provider. When I set "Preserve on Abort" on true and delete some row in transaction, I cannot see this row after transaction rollback. Is this correct?
My code:
Dim Conn As ADODB.Connection Dim recSet As ADODB.Recordset Dim cmd As ADODB.Command Dim c1 As Long, c2 As Long ' ## Open a connection Set Conn = New ADODB.Connection Conn.Open "Provider='SQLOLEDB';Integrated Security=SSPI;Data Source='PENASSQLEXPRESS';Initial Catalog='PokusDB';" ' ## Open a table Set recSet = New ADODB.Recordset '## Open cursor Set cmd = New ADODB.Command Set cmd.ActiveConnection = Conn cmd.Properties("Preserve on Abort") = True cmd.CommandText = "SELECT * FROM zkouska order by text" recSet.Open cmd, , adOpenStatic, adLockOptimistic, adCmdUnknown '## TransBegin Conn.BeginTrans '## CursorMove recSet.MoveFirst '## RecordDelete recSet.Delete adAffectCurrent recSet.Requery adOptionUnspecified '## TransAbort Conn.RollbackTrans '## CursorMove recSet.MoveFirst c2 = recSet.Fields("cislo").Value If c1 <> c2 Then Err.Raise 1000, "Transaction test failed" End If
When I call Requery after RollbackTrans everything is OK, but what is then "Preserve on Abort" for?
Also I must call Requery after delete or I will get an error after MoveFirst. Do I miss something?
Hello,
Can I use the "SQLOLEDB" provider to connect to a SQL Native Client? Follow-up question: does the "SQLOLEDB" provider use the same TDS transport protocol as the SQL Native Client provider?
Thanks as always!
dotBomb
It seams as if the Connect Timeout property is not working correctly if the server that one is trying to connect to is down. This is my connection string.
Provider=SQLOLEDB;Pooling=False;Data Source=172.16.136.4;Initial Catalog=Db1;User ID=test;Password=test;Connect Timeout=5;
The timeout is ignored and the connection times out after about 15/20 seconds?
Any ideas?
I am having trouble logging into my sql server from an asp application using SQLOLEDB.
I am running XP, IIS5 and SQL Svr 2000 on my developement machine. I am able to log into the database using localhost/application.
When I port the code and database over to the server (Server 2003, IIS6, SQL Svr 2000), I am unable to connection using the actual url of the site.
I set the login up on the logins for the database manager along with password (using multi, not Windows authentication). Added that user to the database security logins, giving it dbo, srvr admin, etc. Like I said, works on my dev machine.
The SQLOLEDB request is Provider=SQLOLEDB;Data Source=(local);User ID=UID;Password=PWD;Initial Catalog=DBName.
I set the database up as a System DSN in ODBC, using SQL Server Authentication. The connection tests out just fine.
When I attempt to connect, I get an ADO message indicating that the user id that I supplied could not sign in to the server.
This is driving me nuts.
Does anyone out there have any ideas as to what I have missed on the server vs local developement machine?
Any and all help greatly appreciate.
Thx, Tom
if we see provider=sqloledb in the connection string of a legacy sql server 2000/2005 system we're trying to understand better, can we conclude that ODBC is definitely not in the client picture, that possibly OLEDB is and that SQL Native isnt? Can we conclude for sure what middleware must be in use?
My limited understanding of this "middleware" space is that ODBC is old and restrictive, OLEDB is a lot more state of the art and general, and that SQL Native is more proprietary than OLEDB.
Even if we can conclude what middleware must be in use, is it generally as simple as changing a connection string and ensuring installation of the preferred middleware in upgrading to better performing middleware?
Hey all, 2 questions.
Is there a way to 'refresh' the value of adodb.connection.state? and When my ado class reconnects after a dropped connection i still get connection failure errors.
I'm trying to make the connection b/n the my work's app and mssql server more 'robust'.
Our ado class tests the connection in the 'execute' method ie if connect() execute db task
.connect() is
IF this.loConnection.State = adStateOpen
*-- The connection is already open.
ELSE
create connection
ENDIF
return (this.loConnection.State = adStateOpen)
Now, this works fine when starting up the app, and everything runs fine, but *in theory* it should be able re-establish the connection at any time. So i kill the connection @ on the sql server while the app is running and try to perform a task that requires a db connection.
problem is that 'this.loConnection.State' is still equal to 1 even though the connection is no longer there.
It gets changed to 0 when the .execute fails but the failure is less than graceful... and although it reconnects (sp_who shows a new connection), it seems like the ado object is trying to connect using the old connection rather than the new one. command.activeconnection is set to the new connection in the .connect method so i dunno what's up.
Any ideas?
Hi,
I have a client application that creates a COM object using the program ID 'SQLOLEDB enumerator' to get an ISourcesRowset. Once I retrieve the ISourcesRowset, I call ISourcesRowset.GetSourcesRowset to obtain a list of available servers.
This works if the client computer (the one running the application) also has SQL Server (or SQL Express) installed. But on a clean computer after installing SQLNCLI.MSI, the call to GetSourcesRowset returns an error 80004005.
My question is, what do I need to install on my client's machines so I can retrieve available servers using this method? Is there another MSI that needs to be installed? Do I need to install SQL Express Client_Components? Or is there something else?
Thanks in advance for any information you can provide.
-Eric Harmon
When creating a connection string in ADO (using Delphi7), I insert the provider like this:
Provider=SQLOLEDB;Data Source=.;Initial Catalog=master;Integrated Security=SSPI;User ID=sa;Password=masterkey
Now, when I try to run this on a SQL Server 2005 or SQL2005 Express database, it won't create the connection
unless I use the SQLNCLI provider.
Is there a way to force them to use the OLEDB provider?
I have MDAC2.8-SP1 installed.
Windows Server 2003 R2 Enterprise x64 Edition service pack 1
SQL Server 2000 Enterprise edition 32 bit, SP4 : 2000.8.00.2039
jdbc driver: jtds
connection string: jdbc:jtdsqlserver://ZH-DATA-4:1434/[dbname];instance=[instance name]
the connectivity works fine...almost.
I have 2 identical sql servers one of which is linked to the other via a linked server config which for one particular query gives back the error I give in the subject of this thread:
java.sql.SQLException: Could not get the data of the row from the OLE DB provider 'SQLOLEDB'
if I run the exact same sql string in query analyser it runs with no problem.
if have similar queries also running from java which use the linked server and these do not give an error. I am at a loss as to explain why this is happening.
the query in question joins together a number of views which reference the linked server.
I have tried everything I can think of including recreating the views and linked server definition.
If all is OK in query analyser, how can it fail when called over jbdc (especially when all other db requests succeed) ?
I have SQL Server 2000 SP4 and i am using a link server which is also 2000 sp4. I am facing an interesting error which is
OLE DB provider 'SQLOLEDB' supplied inconsistent metadata while extracting the data.
FYI.
I am executing the dynamic query which uses another server to fetch the data.
Let me know if anyone can help me out to resolve this issue.
Thanks
Vishal
SQL2000 / W2K
I'm having issues with a query to a view that references a view on a linked server, that in turn references a view on a third server.
Query to view on Server A --> View on Server B --> View on Server C
I can query from A to B using the linked server.
I can query from B to C.
I can query from A to C.
All servers at the same location on the same domain.
I cannot query a view on A, that references a view on B, where the view on B references a view/table on C
Each linked server configuration uses "Be made using this security context", with the user specified being 'sa'. I was hoping to get security out of the equation for debug purposes, hence the sa use.
I have tried from Query Analyzer using both windows and sql auth.
MSDTC is running on all servers as local system.
The full error returned is:
Server: Msg 7391, Level 16, State 1, Line 1
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
Thanks for any support,
Chris
Hi All,
I am getting following Error:
Oracle linked server in SQL server 2005 to update tables in Oracle database.
I have used OPENQuery to update tables in Oracle from a SQL Server 2005 Stored procedure.
If we run query from sql management studio for inserting or updating table of linked server then it runs fine. But if we use Begin distributed transaction then its gives error -
Server: Msg 7391, Level 16, State 1, Procedure sp_test, Line 105
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
We are using Sql server stored procedure to run the open query syntax for updating oracle interface table.
Hi,
I am using the AutoFetch Option with Fast Forward Cursors with SQLOLEDB to access SQL Server 2005. This really works out but for the first I execute the query only.
But as I use parameterized statements, when I re-use the cursor, just re-binding new variables and re-executing it again, the AutoFetch does not work any more.
I noticed that thru the SQL Server Profiler. I see a sp_cursorfetch been called at the second time the cursor is re-executed.
Does anyone know how to work it out?
Thanks in advance.
Marcelo.
Hello,I'm struggling a giant fight with my webprovider (ASP.net 2.0) in the following case:I'm using the default connectionstring which automatic is provided when I create an ASP.net webstarterskit. This connectionstring is working fine when i deployed that kit to a W2003 server testenvironment and is also running on my laptop. But when I tried to deploy the website to my (new) hostingserver, also a W2003 server, I landed in ERROR-land. The last error I received was:Cannot open database "Club" requested by the login. The login failed.>
Login failed for user 'NT AUTHORITYNETWORK SERVICE'.NB: I gave that user the right privileges and roles. My provider is not willing in sending me an example of a good working connectionstring and is directing me to their FAQ-site in which the right connectionstring is mentioned. That string looks like this (for a MS SQL database):strConnectie = "Provider=SQLOLEDB;" & _ "Data Source=(local)SQLEXPRESS;"
& _ "Initial Catalog=[GEBRUIKERSNAAM];" & _ "User Id=[GEBRUIKERSNAAM];" & _ "Password=[WACHTWOORD]"My connectionstring in web.config looks like this:<connectionStrings><clear/><add name="ClubSiteDB"
connectionString="Data
Source=.SQLExpress;Integrated Security=true;AttachDBFileName=|DataDirectory|Club.mdf;User
Instance=True" providerName="System.Data.SqlClient"/><remove
name="LocalSqlServer"/><add name="LocalSqlServer"
connectionString="Data Source=.SQLEXPRESS;Integrated Security=True;User
Instance=True;AttachDBFilename=|DataDirectory|aspnetdb.mdf"
/></connectionStrings>Is there anybody in this forum that can help me out and explain to me how to use the string, as provided by the host, in the default connectionstring i use in web.config ??Any help is welcome and appreciated.NB: I'm using VWD 2005 Express Edition and SQL Server Management Studio ExpressHarry Elzinga
Hi,
I am facing the below mentioned error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
I have a Insert statement which i am using to insert data into a remote server from my local server. I have added the remote server as a linked server in my local server but when i try to execute the statement i am getting the above mentioned error. I am using Windows Enterprise Edition 2003 and SQL Server 2000.
I have also enabled the Allow InBound and Allow OutBound in the security configuration of My Computer properties but still i am facing the same problem. Kindly let me know how to resolve this issue.
Thanks.
Hi,
I was making a linked server connection between 2 SQL Server 2000 servers (both running on Windows 2003 Server), and I was creating an insert trigger in one of the SQL Server table to insert the same value to the other SQL table. But when I try to make an insert to the table, the following error occurred :
Server: Msg 7391, Level 16, State 1, Procedure <triggername>, Line xx
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
I tried to change the trigger into a SELECT statement only and the error still occurred. But when I tried to insert a row directly to the linked server via Query Analyzer, it succeeded.
I have read KB 280106, KB 306212, and KB 329332, and I've tried SET XACT_ABORT ON statement, but none of them can solve the problem.
If there's anyone who has idea on what's wrong or has a suggestion what I should try please help.
Thank you in advance.
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit):
Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,)
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,)
MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close)
MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2
<Func Name='LaunchFunction'>
Function=Do_sqlPerfmon2
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='0'>
Doing Action: Do_sqlPerfmon2
PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
<Func Name='Do_sqlPerfmon2'>
<EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'>
PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007
Gathering darwin properties for failure handling.
Error Code: 2
MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
Any ideas?
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
Hi,
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
Please help me
thanks in advance
Srinivas
We have reports deployed in the Report Server. While connecting from client, we are getting the error
"An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
Please help.
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access.
I have looked where the error logs should be, but there are no error logs.
I rebuilt the query as I needed to change this, but this did not help.
Is there someone who could point me in the correct direction.
Thanks!
Terry
This has worked fine for weeks, and months.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
My link server was working just fine until friday evening.
It stopped worked over the week end.
with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine
--TNS names looks fine
---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
Hi,
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1
Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics
Error : 614, Severity: 21, State: 3
A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine
Is there anything I have to do further?
For Error 1 : The work around given by Microsoft
=================================================
I ran
DBCC CHECKTABLE(syslogs)
I am getting the following message on :
master:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 11 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model:
Checking syslogs
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 31 data rows.
DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 19 data rows.
for master:
Checking 8
The total number of data pages in this table is 1.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 27 data rows.
for model:
Checking 8
The total number of data pages in this table is 47.
*** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device.
Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Please advice how to get rid of this problem.
Thanks in advance,
Anu
where can i find it?
thanks
Hi,
I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE.
I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that.
Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
Step : 3 Push From Mobile
Code BlockmoSqlCeRemoteDataAccess.Push("ItemMaster", msConnectString);
So i am getting an error on 3rd step.
While i am trying to push it says,
"The Push method returned one or more error rows. See the specified error table. [ Error table name = ]".
I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
We are encounrtering a strange error in out sql error log:
source: ods
error: 17824, severity 10, state 0
source: ods
unable to write to ListenOn connection '.pipesqlquery', loginname 'op', hostname 'BOR0181'
This error occurs multiple times per day from several client stations.
It started when we enabled replication on that server, and started replicating the whole database to another server.
Can somebody give me an idea on what the problem could be ?
Bart Roelant
Capsugel Belgium