~* Cannot Open 2005 Rdl In 2003 *~

Jul 24, 2007

Hi everbody,


when I add rdl filed on VS2003 from VS2005, it give me an error :
Deserialization failed: The Report element was not found.

Are there anybody to help me?

Thanks.

View 1 Replies


ADVERTISEMENT

.Net 2003 Access Crystal Report XI: Error:Failed To Open The Connection: [Database Vendor Code: 17 ]

Sep 19, 2006

I am receving this error: Failed to open the connection: [Database Vendor Code: 17 ], from .Net 2003/C# to Crystal Report XI with SQL Server 2000 has backend database.

Is there a security permission that has been overlooked?

Here is the code I use to access CR XI

ConnectionInfo connectionInfo = new ConnectionInfo();
TableLogOnInfo tableLogOnInfo;
Database DB;
'CrystalDecisions.CrystalReports.Engine.Table' table;
Tables tables;

//Log in
connectionInfo.ServerName = "ServerName";
connectionInfo.DatabaseName = "Database Namet";
connectionInfo.UserID = "userid";
connectionInfo.Password = "password";

//Get Table inf from report
DB = reportDocument..Database;
tables = DB.Tables;


//Looping through all the tables in CR and apply connection info
for(int i = 0; i < tables.Count; i++)
{
table = tables[ i ];
tableLogOnInfo = table.LogOnInfo;
tableLogOnInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo(tableLogOnInfo);

}

CrystalReportViewer.ReportSource = ReportDocument.ReportSource;
CrystalReportViewer.Visible = true;

Any advise would be helpful.
Thank you

View 6 Replies View Related

Win 2003 X64 + SQL 2005 &< Win 2003 32 + SQL 2000?

Jul 23, 2005

I may not be the best forum for this post, however I believe some onecan still help me or direct me somewhere else.I'm finding that win 2003 x64 and SQL 2005 CTP is slower than win 2003and SQL 2000.Machine A: Opteron 2.2 (248) w/ 2 cpus. 8GB memory. SCSI disk array.Windows Enterprise 2003 x64 final release. SQL Server 2005 enterpriseCTP.Machine B: Opeteron 2.2 (248) w/ 2 CPUs. 4GB Memory. IDE Drives.Windows Server 2003 (32bit) and SQL Server 2005 (standard).I'm using Cognos' DecisionStream as the ETL tool (32bit). I have theidentical job on both machines. Machine A is slower to do my nightlybuild (1h 20m) vs. Machine B (50m).I've done no tweaking of the databases. I Used SQL 2005's studio tocopy the database from Machine B to Machine A.The only major difference is the O/S and SQL, the machines are samespeed, however Machine A has twice the memory and faster disk; so Iwould expect it to be faster.Can anyone think of smoking guns I might be missing?TIA

View 2 Replies View Related

Cannot Open SQL Server 2005 Express From C#.Net 2005 (using Code)

Mar 15, 2008


can anybody help me.

I am getting an sql Server 2005 connection error from c#.net 2005.

following is the error
--------------------------------------------------------------------------------------------

{"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"}

---------------------------------------------------------------------------------------------


i have changed the default settings. local and remote connection are enabled.

following are the code i am using in C# .Net 2005
---------------------------------------------------------------------------------------------------------------
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlClient;


SqlConnection conn = new SqlConnection("server=localhost; user id= sa; pwd =; Initial Catalog=testdb;");

---------------------------------------------------------------------------------------------------------------


when i connect through the c# wizard, everything is perfect.

thanks in advance
sam alex

View 10 Replies View Related

SPS 2003 And MS SQL 2005 Server

Apr 13, 2008

I have a question? Can SPS 2003 use MS SQL 2005 Server?

View 4 Replies View Related

How To Migrate From .net 2003 To 2005

Sep 30, 2006

hi
can anyone help me in migrating projects from .net 2003 to .net 2005
any help would be appreciated

View 2 Replies View Related

Can I Install MS SQL 2005 Dev On Win 2003 Web

Jun 23, 2006

Hello

to everyone again to get info and support I relay on forums.....

I buy Visual studio 2005 professional there is included MS SQL 2005 developer edition

I buy Brand new DELL PC ($4750) with Windows server 2003 web edition

I can not install MS SQL 2005 developer edition

my curently cost to buy all these MS products was $1080CAD + $350CAD for win 2003

I didn't find normal to have no telephone suport and no version capability

I am really mad!!!!

please if there is step-by-step guide how to install MS SQL 2005 on win 2003 web please let me know

mail@bluelabs.ca

Thank you in advance
Valentin Petkov

View 8 Replies View Related

SQL 2005 And Access 2003

Oct 11, 2005

Is there a patch available for Access 2003 that will allow it to interoperate fully with SQL 2005?

View 1 Replies View Related

2005 Rerporting With VS 2003?

Dec 3, 2007

Is it possible to use SQL Server Reporting Services 2005 with a 1.1 application? IE, can I use Visual Studio 2003 and SSRS2005 together?

Thanks SO much ahead of time

View 3 Replies View Related

Installing SQL Server 2005 64 Bit On 32 Bit 2003 OS

Nov 27, 2007

Can you install 64 bit 2k5 sql server on 32 bit 2k3 OS, yes, no? if there is way then can anyone guide me.
thanks
Derek

View 5 Replies View Related

4 GB Memory For SQL 2005 Std &#043; Windows 2003 Std

Jul 31, 2007

We just upgraded the memory of our database server from 2GB to 4GB. And its OS is windows 2003 standard and sql is 2005 standard edition. According to microsoft(http://msdn2.microsoft.com/en-us/library/ms143685.aspx and http://msdn2.microsoft.com/en-us/library/aa366778.aspx#physical_memory_limits_windows_server_2003), this configuration should allow database use up to 4 GB memory. My question is : Do I need to do anything(such as: adjust the maximum memory in management studio) to let our server be able to consume this extra 2 GB memory?


Does this solution http://support.microsoft.com/kb/274750 apply for SQL server 2005?

View 1 Replies View Related

SQL 2005 Express And Access 2003 SP2 Adp. Please Help

Mar 22, 2007

Hi all,

I have SQL Server 2005 Express running and I am creating a database through access (Access 2003 SP2) and no problem it creates the database...

But when I try to create other objects like views and database diagrams, I get the message below which is quite detailed but I just don't know where to get the service packs or updates needed to have this problem solved. Can anyone point out what the problem and the fixes are?

Here is the message that I get:

"This version of MS Office Access doesn't support design changes with the version of MS SQL Server
your access project is connected to. See MS Office Update Website for the latest information and
downloads (on the Help menu, click Office on the Web). YOur design changes will not be saved.

You have connected to a version of SQL server later than SQL Server 2000. This version of Visual Studio
or Access that you are using was released before teh version of SQL Server to which you are connected.
For this reason you might encounter problems.

Please check with MS to see if there is a service pack that you should apply to Visual Studio or Office
in order to get support for the version of SQL Server to which you are connected.

You can continue but any new object types might not be enumerated, and it will not be possible to
save any objects or database diagrams thatyou create using the Visual Database Tools."



Thanks

View 3 Replies View Related

MS SQL 2005 + Windows Server 2003 SP2

Jul 13, 2007

At first I thought it was just me, but has anyone else noticed that SQL 2005 suffers a performance hit when you install Windows Server 2003 SP2?



Since SP2, memory and hard drive usage has gone through the roof on a number of servers I use. It may just be coincidence... but it seems unlikely.

View 6 Replies View Related

Access 2003 With SQL Express 2005

Nov 15, 2006

I am a fresher in using SQL with access.

I am using a code in Ms access to link a table that is in Sql express 2005.

I use this linked table name to download records to the local Access table.

The link is then dropped in Access.

Is there any way to write back records into the linked Sql table from Access.

It does not allow me to delete / add / modify records of a linked table.

How can I do this.



Thanks

Sjohn

View 1 Replies View Related

SQLServer Express 2005 And VS.NET 2003

Apr 6, 2006

I would really like to be using SQLServer Express 2005 for some desktop database applications and replace MSDE. However, I am using VS.NET 2003 and so far I have not been able to discover if that combination will work.

Thanks,

Sid.

View 9 Replies View Related

Windows 2003 SP2 Is NOT A Supported OS For SQL 2005 SP2???

Apr 5, 2007

Maybe this is just an oversight in the documentation? Here it is for all to see on the download page for SQL 2005 SP2:

http://tinyurl.com/35nunk

Note the supported operating systems:

Windows 2000 Service Pack 4; Windows Server 2003 Service Pack 1; Windows Vista; Windows XP Service Pack 2

NO mention of Windows 2003 Service Pack 2, but Windows 2003 Service Pack 1 is specifically mentioned.

Any ideas on this one? Thanks!

Chris

View 4 Replies View Related

VS 2003 Assembly In SQL Server 2005

Oct 11, 2007



Hi to all,

i have one VS 2003 assembly,now i want to laod this asseembly in SQL Server 2005 .then i am going to write SQL-CLR 2005 function in which i want to use some functions of this VS 2003 assembly.is this possible?
please help me....

Thanks in advance.


Chetan S. Raut.

View 2 Replies View Related

SQL 2005 - Window 2003 With IIS Server

Sep 11, 2006

Dear ALl,

We have SQL 2005 running on Window 2003.

Our Dev team created a web application. Which user we need to add in the database and what permission we need to assign him. So web application can do read, write and modify in the database tables.


Database name = ACCT
IIS server name = MASS     (running on different machine win 2003)

What role following accounts play in the connection of iis to database server login.

1: ASP.NET
2: MASSii$1  & massiis1

If
<indentitt impersonate = TRUE  or False> in the config file..


 

Thanks in advance.

 

 

 

View 1 Replies View Related

DTS Code Works Only With VS 2003 But Not With VS 2005 ?

Feb 21, 2007

Hi;

I wanted to use the following code to run a DTS package from a 2005 Web Page code behind partial class. This code works fine in a VB 2003 module

going against  SQl Srvr 2000.

Here is the code: (It initiates from a button click handler)

Dim conn As New SqlConnection("initial catalog=MY_Data;server= XYZ081552X7X441TRSQL;integrated security=SSPI")

Dim hold1 As Integer

Dim hold_source As String = ""

Dim hold_desc As String = ""

Try

conn.Open()

Catch ex1 As Exception

MsgBox("The Test connection failed to open" & vbCrLf & ex1.Message)

End Try

MsgBox("About to create a DTS object")

Dim oPackage As New DTS.Package2Class (Compiler doesn't like this line) Type DTS.Package2Class is not defined.

 

Dim oStep As DTS.Step (Or this one) Type DTS.step is not defined. 

oPackage.LoadFromSQLServer("XYZ81552X7X441TRSQL", , , DTS.DTSSQLServerStorageFlags.DTSSQLStgFlag_UseTrustedConnection, , , , "cpyPrinters2Excel", )

For Each oStep In oPackage.Steps

oStep.ExecuteInMainThread = True

Next

oPackage.Execute()

For Each oStep In oPackage.Steps

If oStep.ExecutionResult = DTS.DTSStepExecResult.DTSStepExecResult_Failure Then

oStep.GetExecutionErrorInfo(hold1, , )

Else

End If

Next

oPackage.UnInitialize()

oPackage = Nothing

conn.Close()

 

Has Microsoft changed the DTS objects so that they work only with  SQL Srv 2005 ?

Thanks for your insights.

 

 

View 3 Replies View Related

Sql Server Mobile 2005 And VS 2003

Apr 17, 2007



Hi All:



I need one clarification. Can i use sql server Mobile 2005 and vs 2003 (.NetCF 1.0) for my application.



Thanks

Vamsi

View 5 Replies View Related

Cannot Install SQL Server 2005 On A Windows 2003 Cluster In Virtual Server 2005

Jun 5, 2006

I
am trying to install SQL 2005 in a 2-node virtual Windows 2003 cluster. I set
the cluster up through Virtual Server 2005 with 2 virtual nodes and one
virtual domain. The nodes can connect to each other as well as the
physical machine. When I try to install a fresh copy of SQL 2005 on my
cluster, I get an error every time. The
error stops the installation while checking system configuration after
installing prerequisites. The log file entry is as follows:

*******************************************
Setup Consistency Check Report for Machine: --SERVERNAME--
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: CheckPassed
Article: IIS Feature Requirement, Result: Warning
Description:
IIS is not installed, therefore Report Server feature will be disabled
Action: Install IIS in order for Report Server feature to be enabled
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
1
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
Error: Action "InvokeSqlSetupDllAction" threw an exception during execution. Error information reported during run:
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "ComputerList" {"SqlComputers", "", ""} in cache
Source File Name: datastoreclusterinfocollector.cpp
Compiler Timestamp: Fri Sep 16 13:20:12 2005
Function Name: ClusterInfoCollector::collectClusterVSInfo
Source Line Number: 883
----------------------------------------------------------
Failed to detect VS info due to datastore exception.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56
----------------------------------------------------------
Failed to find a cluster group that owned shared disk: J:
WinException : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastoreclustergroupsproperties.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: ClusterGroupScope.SharedDisks
Source Line Number: 56

View 3 Replies View Related

Database Connection Working In Vs 2003 But Not In Vs 2005

Nov 21, 2006

Hi, I'm fairly new to the asp.net enviroment.. I have a project in asp.net and I need to upgraded to asp.net 2.0... I just did that, and the few errors that I got are resolved already, the only error that I have not been able to figure out is when I tried to retrieve data from a database I get the following error:
An error has ocurred while establishsing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider:Named Pipes Provider, error:40- could not open a connection to SQL Server)  and it points to the following line:

Dim ds As DataSet = Microsoft.ApplicationBlocks.Data.SqlHelper.ExecuteDataset(ConfigurationManager.AppSettings(GlobalD.CfgKeyConnString), CommandType.StoredProcedure, "PG_LST_MENU_BY_SUBJECT")
As I said before my project with the previous version works fine, and this is the only part that is giving me trouble...
thank you  
 

 

View 1 Replies View Related

Reg: Export Excel 2003 To Sql Server 2005

Mar 31, 2008

I want to export Excell 2003 to Sql Server 2005. I am having the following error while execute the query.


declare @SQL varchar(8000)
create table #temp(i int identity(1,1),SiteName varchar(100),SiteDescription varchar(5000),SiteURL varchar(500),CategoryName varchar(200))
set @SQL='Insert into #temp Select * From OPENROWSET (''Microsoft.Jet.OLEDB.4.0'',''Excel 8.0;Database=' +
'a.xls' +';HDR = YES;IMEX=0'',''SELECT * FROM [Sheet1$]'')'

exec (@SQL)



The OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)".

I need a solution urgently. help Pls

View 3 Replies View Related

Creating A Database In SQL 2005 - Using Windows 2003

Nov 3, 2006

when i try to create a new database i get a error: The server could notload DCOMwhat is wrong and how can i fix it?i have updated mssql/win 2003 with the lates updatesRgdsBobby

View 1 Replies View Related

How To Reinstall SQL 2005 In Windows Server 2003 For SBS?

Oct 18, 2007

I've got a Windows Server 2003 for Small Business Server. It had got SQL installed. But then SQL was uninstalled. Now I need to put SQL back in, but I don't see how!


There're three CD-Rom but I don't see how and from which CD to install back SQL.


PS: Correct me if I'm wrong, Windows Server 2003 is sold with SQL 2005, right?

View 3 Replies View Related

Modify VB6 App To Use SQL 2005 Data Instead Of Access 2003

May 19, 2007

I have an existing VB6 application which uses an Access 2003 backend datafile, however, I would now like to modify this to use an SQL 2005 datafile, but I don't know how to go about this or the implications when the application is installed on another machine.



The code I use for accessing the Access 2003 file is below, I want to convert this code to access an SQL 2005 datafile instead, can anyone give me some pointers on the best way to go about this, or code sample.



Dim rst As ADODB.Recordset
Dim dbs As ADODB.Connection

Set rst = New ADODB.Recordset
Set dbs = New ADODB.Connection

dbs.Open "Provider=Microsoft.Jet.OLEDB.4.0; Data Source=" & _
strNetworkLocation & "MyDB.mdb; JET OLEDBatabase Password=MyPassword"

With rst
.Open "SELECT TOP 1 * FROM tblProject WHERE pjProject = '" & _
lstProject.Text & "'", dbs, adOpenKeyset, adLockOptimistic
strDrawingRef = !pjStartupDrawing
strProject = lstProject.Text
frmMain.OpenFile
.Close
End With


Thank-you in advance for any help you may provide.



Mandy

View 4 Replies View Related

SQL Express 2005 With Visual Studio 2003

Jun 2, 2006

I am just starting to work with Visual Studio and SQL. I have Visual Studion 2003 with .net Framework 1.1. I want to download the SQL 2005 Express version and it requires the upgrade to .NET Framework 2.0

Will this affect my Visual Studio 2003? And can I use SQL 2005 with Visual Studio 2003?

Any help would be appreciated.

Thanks,

View 1 Replies View Related

Memory Setting In SQL 2005 In Windows 2003

May 4, 2007

We have a SQL 2005 installed in Windows 2003 64 bit system, which has 16 CPU and 32GB RAM, but the performance is poor. SQL server is AWE enable and the sql start account with "Lock Pages In Memory". I checked the task manager and it looks that the SQL server used only about 300 MB memory. Here is what I found:

http://blogs.msdn.com/psssql/archive/2006/11/28/sql-server-becomes-sluggish-or-appears-to-stall-on-64-bit-installations.aspx?CommentPosted=true#commentmessage

What I need to do?



Thanks



View 5 Replies View Related

Problem Installing SQL 2005 On A Windows 2003 DC

Mar 10, 2006

Hello to all,

we try to install an SQL 2005 server on a Windows 2003 server that is also a Domain controller. In discussions of july last year, Dan Jones said :"Unfortunately in setup you cannot change the default account for all services. So there is absolutely no work around for this problem. This will absolutely be fixed by RTM - "

Can anybody help me in that way. We tried installing with our latest CDs (december 2005)

View 7 Replies View Related

Connection From Acces 2003 To SQL Server 2005

Dec 10, 2006

What is the fastet connection between access 2003 to sql server 2005?

View 2 Replies View Related

Using MS Access 2003 Project With SQL Server 2005

Mar 16, 2006

I continue to receive an error that states "The version of Microsoft Access doesn't support design changes with the version of Microsoft SQL Server your Access project is connected to. See the Microsoft update website for the latest information."

I'm using Access 2003 that I ran a database through the Upzinging Wizard with a copy of SQL Server 2005.

I have searched the Office Update pages and can't locate anything that helps, although I'm sure I'm probably missing something.

Any suggestions?

Thanks in advance,

Mike Duke

View 9 Replies View Related

Cannot Install SQL 2005 On Windows Server 2003

Dec 12, 2007

I'm unable to successfully install SQL 2005 on Windows Server 2003. Everything installs correctly except 'SQLXML4', and after installation, there's no Management Studio, unless I then install SQL Express Management Studio.

Installation details: Successfully installs 'Native Client' and the 'Support Files'. The 'System Configuration Check' passes everything. Installed 'Database Services', 'Integration Services', 'Client Components' (except for the 2 development tools), and 'Books Online'. Created the default instance (there were no other instances). Set it to run as 'Local System'. Set only the 'SQL Server' service to start after setup. Specified 'Mixed Mode'.

Then the installation proceeds, and everything looks good until SQLXML4 fails. Soon after, a window pops up saying "Setup is preparing to continue with the installation". Nothing happens till I click 'OK', and then 'Workstation Components' shows as having failed. Then the installation finishes normally. However there's no Management Studio, except that I then installed the SQL Express Management Studio, which appears to work fine.

I tried uninstalling, and installing again, but got the same results.

How can I get this to install correctly?

Thank you.

View 2 Replies View Related

Oracle 7 (SCO UNIX) To SQL 2005 (Windows 2003)

Apr 25, 2008



I am currently having issues getting the odbc32ad driver configured properly so I can transfer the database off of the old Oracle 7 database (currently running SCO UNIX). I have the orignal Oracle 7 disk and installed the drivers, but I am not sure what the SA login for Oracle is, nor do I know what the "Connection String" is.

Has anyone made this transfer before? Please help.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved