I execute an UPDATE statement using EXEC after I build it into a string:
@lcSQLString = 'UPDATE ' + @@mytable + 'SET x = y ...'
EXEC(@lcSQLString)
When the UPDATE fails, @@ERROR is nevertheless set to 0, because it returns the status of the EXEC command (which succedded) and not the @lcSQLString (which failed). At least, that is the explanation, I think. If I execute the statement directly by substituting the variables with their values, @@ERROR displays the correct value.
My update query updates about 50 columns and they all have the sameformat: (Im using ADP to interact with the SQL Server)UPDATE dbo.GIS_EVENTS_TEMPSET VEH1TYPE =(SELECT VEHICLETYPEFROM VEHICLE AS AWHERE(GIS_EVENTS_TEMP.CASEID = A.CRASHNUMBER) AND(A.UNITID = 1)),VEH2TYPE = (....... same as above with UNITID = 2)VEH1DAM = (Same format different tables...)....nThe problem is that it's part of an import process that is dependent ondata from an outside source which come once a month.I found an error in one of the tables (a duplicate ID) which should notbe in the table this is causeing the "Subqurey returns more than onevalue" error.How can I guard against this..? If possible I would like it to onlyreturn the first value..I tried "COALESCE" but I couldn't get it to work I also tried "SELECTDISTINCT"....Any Ideas would be great.....
Is there some example of how i can add a return status into my stored procedure to have an extra field where I can verify if it runs successfully 1 if success -1 if error (server, etc) 0 if empty record return
As part of configuring my SQL Server 2005 box to be able to use the xp_cmdshell function, I ran sp_xp_cmdshell_proxy_account to set up the credentials:
Msg 15137, Level 16, State 1, Procedure sp_xp_cmdshell_proxy_account, Line 1 An error occurred during the execution of sp_xp_cmdshell_proxy_account. Possible reasons: the provided account was invalid or the '##xp_cmdshell_proxy_account##' credential could not be created. Error code: '5'.
I am assuming that this is an "Access Denied" error message. Has anyone got any ideas on why this is happening or what I can do to narrow down what the problem is. I can't find any logs with further information.
I have used a similar setup on another SQL Server 2005 box before and have never had a problem running the sp_xp_cmdshell_proxy_account function. I can't see what I have done differently this time.
Further information:
The SQL Server and SQL Server Agent services are running under the DomainDomainUser account.
I have given the DomainDomainUser the following privileges: Act as part of the operating system Log on as a batch job Log on as a service Replace a process level token
Hi All, When I use the following I get an error. I think it is because of duplicate records in my table.
Update person Set username = (Select username From update_person Where person.firsname = update_person.firstname and person.lastname = update_person.lastname)
There are a few users that have the same first and last name. How can I ignore the duplicate records and continue to update the table?
could someone please tell me : am I supposed to use the OLE DB Command in a dataflow to call a stored procedure to return a value? Or is it just supposed to be used to call a straightforward insert statement only?
What I am hoping to do:
I have a table with a few columns and one identity column. In a dataflow I would like to effect an insert of a record to this table and retrieve the identity value of the inserted record... and I'd like to store the returned identity in a user variable.
If I AM supposed to be able to do this... then how on earth do I do it?
I have spent hours fooling around with the OLE DB command trying to call a stored proc and get a return value.
In the Advanced Editor any time I try to add an output column (by clicking on Add Column) I just get an error dialog that says "the component does not allow adding columns to this input or output)
So, am getting pretty concussed .. banging my head of the wall like this...
So put me out of my misery someone please.... is the OLE DB Command intended for this or not?
If CurrentProject.IsConnected Then MsgBox "Base ya Conectada.Procedemos a cerrarla primero", vbOKOnly If SQLConexion.State = adStateOpen Then SQLConexion.Close SQLConexion.Close End If SQLConexion.Open SQLSentencia AbreConexionSQLSERVER = 0
If I detect that the connection is opened while I am initializazing varriables, I want to close always the connection and then begins my aplicattion always opening the connection, but it always returns a error 91..
I googled on the latter error number and got nothing back Error: 0xC0048006 at Set Destination File, ActiveX Script Task: Retrieving the file name for a component failed with error code 0x016F9EA4.
The former only returns one result which does not explain my problem
I have created a custom CLR user define aggregate function based on the example that i found at http://msdn2.microsoft.com/en-us/library/ms131056(SQL.90).aspx.
It works great until i discovered that it will failed if i try to do either one of the following:
query a large records e.g: more than 4k records has IS NULL in my where clause e.g: WHERE myConcatenatedFld IS NULL
Other than these two, it works perfectly fine.
Here is the error that i got:
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have attached the Concatenate class that i used in my UDAGG.
I have a stored procedure that works when executed in query analyzer. (It is also way too long to post here) When called from my application ado.net returns the error:
Invalid object name #idTable
If I run the proc in query analyzer using the same parameters (copied from quickwatch while debugging) there is no error.
While very complicated, this procedure runs quickly so timing out is not an issue.
Does anyone know why a proc would run in query analyzer and not in an asp.net/c# application?
AS DECLARE@UPLIDCount int DECLARE @OldUPLIDCount int SELECT @UPLIDCount = (SELECT Count(UPLID)/1000 AS adjcount FROM tblProvLicSpecloc WHERE DelDate is null OR DelDate > GETDATE())
IF EXISTS(SELECT var FROM tblDMaxVars WHERE var = 'UPLID Count') BEGIN SELECT @OldUPLIDCount = (SELECT var FROM tblDMaxVars WHERE var = 'UPLID Count') IF @UPLIDCount > @OldUPLIDCount BEGIN UPDATE tblDMaxVars SET value = '' + CAST((@UPLIDCount*1000) AS nvarchar(1000)) + '' WHERE var = 'UPLID Count' END END ELSE BEGIN INSERT INTO tblDMaxVars (var, value, description) VALUES ('UPLID Count', '' + CAST((@UPLIDCount*1000) AS nvarchar(1000)) + '', 'counts UPLID records and rounds down to the nearest thousand') END
GO
The table tblDMaxVars only has three columns, none of which are integers, yet I still return this error:
Code:
Syntax error converting the varchar value 'UPLID Count' to a column of data type int.
I have a table that contains a column for a calcuated member (x) of type decimal number. When I tried to display the total of this calculated member in the table footer (=sum(x)), I am getting "#Error" instead of the sum of all displayed calculated values.
Column X
--------------
0
0.67
0.10
0.23
#Error (footer cell, expression -> =Sum(x))
=First(x), =Last(x) and =Max(x) worked fine, not sure why Sum failed. Please help...
I've written sql code which takes a date and finds the Last Day of the Month one year ago. For example, it takes the date '2015-04-17' and returns the date '2014-04-30'. The code works fine in a query. Now I'm trying to turn this into a function. However, when I try to create the function I get the error:
Operand type clash: date is incompatible with int
Why is this error being returned?
Here is my function:
CREATE FUNCTION dbo.zEOM_LY_D(@Input Date) RETURNS date AS BEGIN; DECLARE @Result date; SET @Result = convert(DATE, DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,dateadd(m, -11, @Input)+1),0)),101) RETURN @Result; END;
I Installed SQL Reporting services 2012 service with sharepoint 2013 ... and started it with success..I followed the microsoft's procedure.. URL....After , I have not encountered any problems when I created the application <--- 3 databases created in my SQLSERVER instance//The problem occured when I tried to click on my ssrs application_name --> system settings...ERROR 500 Correlation ID: f6c5f49b-6ab0-4009-6f31-fd019ddc3ecc
This what I read in the log of sharepoint -->
01/14/2013 12:18:36.22 w3wp.exe (0x0BEC) 0x05D8 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://vwaisql201202:22628/_admin/ReportServer/ReportingServicesSystemSettings.aspx?ID=5abbbf0d-e8dd-4e8e-93d6-eddc77225a9f)). Parent No
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
I'm currently receiving the following error message whilst attempting to install SQL Server 2005 Standard Edition on Windows Server 2003 (32 Bit): Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
This server already has an install of SQL Server 2000 as the default instance. I'm attempting to install a new named instance of SQL Server 2005.
Extract from log:
<Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='0' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 MSI (s) (4C:FC) [10:20:02:833]: Executing op: ActionStart(Name=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Removing performance counters,) <EndFunc Name='LaunchFunction' Return='0' GetLastError='0'> MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Rollback_Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1281,Source=BinaryData,Target=Rollback_Do_sqlPerfmon2,CustomActionData=100Removing performance counters200000DTSPipelineC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INI) MSI (s) (4C:FC) [10:20:02:849]: Executing op: ActionStart(Name=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,Description=Installing performance counters,) MSI (s) (4C:FC) [10:20:02:849]: Executing op: CustomActionSchedule(Action=Do_sqlPerfmon2.D20239D7_E87C_40C9_9837_E70B8D4882C2,ActionType=1025,Source=BinaryData,Target=Do_sqlPerfmon2,CustomActionData=100Installing performance counters200000C:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.INIC:Program FilesMicrosoft SQL Server90DTSBinnDTSPERF.HC:Program FilesMicrosoft SQL Server90DTSBinnDTSPipelinePerf.dllDTSPipeline0DTSPipelinePrfData_OpenPrfData_CollectPrfData_Close) MSI (s) (4C:94) [10:20:02:864]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI1683.tmp, Entrypoint: Do_sqlPerfmon2 <Func Name='LaunchFunction'> Function=Do_sqlPerfmon2 <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='0'> Doing Action: Do_sqlPerfmon2 PerfTime Start: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 <Func Name='Do_sqlPerfmon2'> <EndFunc Name='Do_sqlPerfmon2' Return='2' GetLastError='2'> PerfTime Stop: Do_sqlPerfmon2 : Tue Jun 12 10:20:02 2007 Gathering darwin properties for failure handling. Error Code: 2 MSI (s) (4C!F0) [10:23:46:381]: Product: Microsoft SQL Server 2005 Integration Services -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The system cannot find the file specified.
You can ignore this and it will complete the installation, but subsequently trying to patch with SP2 will fail on the same sections - Hotfix.exe crashes whilst attempting to patch Database Services, Integration Services and Client Components (3 separate crashes).
I've removed SQL Server 2005 elements and tried to re-install, but it's not improved the situation.
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
We have reports deployed in the Report Server. While connecting from client, we are getting the error "An internal error occurred on the report server. See the error log for more details. rsInternal Error)"
Then we went to Report Server, Reporting Service and SQL Server service are all are running fine.
Important thing is some time the reports are working fine, sometimes i am receiving this error. Please help.
We predict whether the services are automatically restarted or transaction logs exceeding the limit or any other parameters to set to avaoid this error?
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?> <ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
I have the error above, but no error log. I can preview the sub report - but this main report fails after working this morning. This is for internal company reports and I rebuilt this one after converting from access. I have looked where the error logs should be, but there are no error logs. I rebuilt the query as I needed to change this, but this did not help. Is there someone who could point me in the correct direction.
I'm running Vista Ultimate. SQL 2005 is set as my Default instance, and SQL2000 is set as (local)SQL2000.
Today, actually half way through today, I restarted my computer after installing Photoshop Updates.
Upon getting my computer back up and running, I cannot access SQL2000 from any website on my computer, nor can I access it from SQL2005 Management Stdio. I CAN access it from Enterprise Manager (SQL2000 tool).
Whenever I run an web app that connects to it I get this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Now I usually get these when ASP.NET can't point to the right spot, but in this case I'm pointing exactly where I need to go. Any thoughts?
--Edit
I should also add my password got changed a few days ago on our Domain. This was the first time restarting after the PW change.
My link server was working just fine until friday evening. It stopped worked over the week end. with and error Error 7399: OLE DB provider 'MSDAORA' reported an error. OLE DB error .
---my oracle 10g client is working just fine --TNS names looks fine ---i recreated the link but i am still getting the same error.
I need your help because a lot of jobs are using that link on Monday it is going to be crazzzy.
We have a production SQLServer 6.5 running with service pack SP5a update:
I got the following 2 errors.....
1.
Error : 806, Severity: 21, State: 1 Could not find virtual page for logical page 67833121 in database 'tempdb' database 'tempdb'
2.
I got error when I ran a job for Update statistics Error : 614, Severity: 21, State: 3 A row on page 2697653 was accessed that has an illegal length of -8631 in database 'abc'.
For Error 2: I ran update statistics using query analyser. It is fine Is there anything I have to do further?
For Error 1 : The work around given by Microsoft ================================================= I ran DBCC CHECKTABLE(syslogs)
I am getting the following message on : master: Checking syslogs The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 11 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
model: Checking syslogs The total number of data pages in this table is 47. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 532 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
tempdb:
Checking syslogs The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 31 data rows. DBCC execution completed. If DBCC printed error messages, see your System Administrator.
I ran dbcc checkdb on master,model and tempdb . Still I get the same problem.
for tempdb:
Checking 8 The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 19 data rows.
for master: Checking 8 The total number of data pages in this table is 1. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 27 data rows.
for model: Checking 8 The total number of data pages in this table is 47. *** NOTICE: Notification of log space used/free cannot be reported because the log segment is not on its own device. Table has 532 data rows.
All system databases and userdatabase recovered successfully when I restarted sqlserver.
Hi, I have application in which i am performing synchronization between SQL Server 2000 and SQL Server 2005 CE. I have one table "ItemMaster" in my database.There is no relationship with this table,it is standalone.I am updating its values from Windows Mobile Device.
I am performing below operations for that. Step : 1 Pull To Mobile
Code BlockmoSqlCeRemoteDataAccess.Pull("ItemMaster", "SELECT * FROM ItemMaster", lsConnectString,RdaTrackOption.TrackingOn);
Step : 2 Using one device form i am updating table "ItemMaster" table's values.
So i am getting an error on 3rd step. While i am trying to push it says, "The Push method returned one or more error rows. See the specified error table. [ Error table name = ]". I have tried it in different ways but still i am getting this error.
Note : Synchronization is working fine.There is not issue with my IIS,SQL CE & SQL Server 2k.
Can any one help me?I am trying for that since last 3 days.
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
