MS SQL Server :: [How Do I...?] SELECT From A Specific Partition?

Transact SQL :: Select Specific Values From All Rows Where Value Of A Specific Column Is (Active)

May 23, 2015

I need to select specific values from all rows where the value of a specific column is "Active"

This part works: SELECT LastName, FirstName, MiddleInit, ClientId FROM dbo.Client

But I want to add: WHERE StatusType = (Active) and how to do this.

View 4 Replies View Related

How To Select A Specific Value From Dataset To Fill A Specific Cell ?

Mar 27, 2007

Hi there !

Thanks for taking the time to read this thread.

I don't know whether anyone has this problem, but I am definitely not using the right keywords to search for a thread.

My situation is this...

I have a dataset that has values to fill cells to multiple tables in a report.
However, I only want to select specific data from the dataset to fill textboxes and others.
I cannot change the stored procedure, but the sample of the data is shown below:-

Row Stat Val
0 dtRpt1 02/01/2005
1 Value1 1
2 Value2 2000
3 dtMailSent 02/28/2005
4 Value3 0
5 Value4 5
6 Value5 658

I know it looks weird, but the row really represents which "row" or textbox is it to fill with the Val. The Stat Column is just a way to make sure that I am filling the right values.

so my new report would have multiple tables to denote different categories.
In my first table, I tried putting the cells as follows:-
(expressions are highlighted in italics and bold)

TextBox1 =IIF(Fields!Row.Value =0, Fields!Val.Value,"")

Table1
Column1
DetailRow1 =IIF(Fields!Row.Value =1, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =2, Fields!Val.Value,"")

Table2
Column1
DetailRow1 =IIF(Fields!Row.Value =3, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =4, Fields!Val.Value,"")
DetailRow3 =IIF(Fields!Row.Value =5, Fields!Val.Value,"")
DetailRow4 =IIF(Fields!Row.Value =6, Fields!Val.Value,"")

I only expect this report to print out one page holding the previous values.

However, it ended up printing like this

----------------------------------------------------------

Table1
Column1
DetailRow1 1
DetailRow2

Column1
DetailRow1
DetailRow2 2000

Table2
Column1
DetailRow1 02/28/2005
DetailRow2
DetailRow3
DetailRow4

Table2
Column1
DetailRow1
DetailRow2 0
DetailRow3
DetailRow4

Table2
Column1
DetailRow1
DetailRow2
DetailRow3 5
DetailRow4

Table2
Column1
DetailRow1
DetailRow2
DetailRow3
DetailRow4 658

------------------------------------------------------

I tried putting it into the headerrows instead of DetailRows, and it ended up printing the last value.
Is there anyway to do this ? print all the values out in one table ? I tried using textboxes, but I think I got my expression wrong.

Is this the correct expression ?

=IIF((Fields!Row.Value,"Dataset") =1, (Fields!Val.value, "Dataset"), "")

and it give me an error
The value expression for the textbox ��textbox5�� contains an error: [BC30455] Argument not specified for parameter 'FalsePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.

Appreciate any advice or suggestion for this scenario !

Thanks!

Bernard

View 3 Replies View Related

Add Other Table Fields To An Existing ROW_NUMBER Partition By Select Query

Feb 5, 2008

I have the following insert query which works great. The purpose of this query was to flatten out the Diagnosis codes (ex: SecDx1, SecDx2, etc.) [DX_Code field] in a table.

Code Snippet
INSERT INTO reports.Cardiology_Age55_Gender_ACUTEMI_ICD9
SELECT
Episode_Key,
SecDX1 = [1],
SecDX2 = [2],
SecDX3 = [3],
SecDX4 = [4],
SecDX5 = [5],
SecDX6 = [6],
SecDX7 = [7],
SecDX8 = [8],
SecDX9 = [9],
SecDX10 = [10],
SecDX11 = [11],
SecDX12 = [12],
SecDX13 = [13],
SecDX14 = [14],
SecDX15 = [15]
FROM (SELECT
Episode_Key, DX_Key,
ROW_NUMBER() OVER ( PARTITION BY Episode_Key ORDER BY DX_Key ) AS 'RowNumber', DX_Code
FROM srm.cdmab_dx_other
WHERE Episode_key is not null
) data
PIVOT
( max( DX_Code ) FOR RowNumber IN ( [1], [2], [3], [4], [5], [6],
[7], [8], [9], [10], [11], [12], [13], [14], [15] )) pvt
ORDER BY Episode_Key

The query below also works fine by itself. You may notice that the Episode_Key field appears in both the query above and below therefore providing a primary key / foreign key relationship. The srm.cdmab_dx_other table also appears in both queries. I would like to add the fields in the select statement below to the select statement above. Using the relationships in my FROM statements, can anyone help me figure this one out?

Code Snippet
SELECT
e.episode_key,
e.medrec_no,
e.account_number,
Isnull(ltrim(rtrim(p.patient_lname)) + ', ' ,'')
+
Isnull(ltrim(rtrim(p.patient_fname)) + ' ' ,'')
+
Isnull(ltrim(rtrim(p.patient_mname)) + ' ','')
+
Isnull(ltrim(rtrim(p.patient_sname)), '') AS PatientName,
CONVERT(CHAR(50), e.admission_date, 112) as Admit_Date,
CONVERT(CHAR(50), e.episode_date, 112) as Disch_Date,
e.episode_type as VisitTypeCode,
d.VisitTypeName,
convert(int, pm.PatientAge) as PatientAge,
pm.PatientAgeGroup,
pm.patientsex,
p.race
FROM srm.episodes e inner join
srm.cdmab_dx_other dxo on dxo.episode_key=e.episode_key inner join
srm.cdmab_base_info cbi on cbi.episode_key=e.episode_key inner join
srm.item_header ih on ih.item_key = e.episode_key inner join
srm.patients p on p.patient_key = ih.logical_parent_key inner join
ampfm.dct_VisitType d on d.VisitTypeCode=e.episode_type inner join
dbo.PtMstr pm on pm.AccountNumber = e.Account_Number

View 3 Replies View Related

Select A Specific Row

Jun 12, 2003

I have a case where I need to randomly select two different serial numbers (a list of serial number are already in a table) and assign it to two variables. Or select a specific row from a list of results. Is there a direct way to do this?

e.g.
declare @var1 varchar(10), @var2 varchar(10)

select top 1 @var1=Serial from Table order by Serial
select top 1 @var2=Serial from Table where ServTag not in (@var1) order by Serial

select @var1, @var2

:confused:

View 2 Replies View Related

Select With Or In A Specific Field

May 25, 2008

I've a select SELECT Field1, Field2, Field3 FROM Tablethe problem is that I can have filled Field1 OR Field2 ... I would like to create a new column in the result for see only the filled field if Field1 is = null or = ' ' I want to see Field2 if Field2 is = null or = ' ' I want to see Field1

View 2 Replies View Related

How To Select Specific Rows

Mar 21, 2001

Hello,

What is the command to select rows between RowNum25 and RowNum30 in a Sql table?

Aditya

View 1 Replies View Related

How To Select Specific Rows..

Dec 20, 2005

Hi Friends...

I have one table , suppose TableA which contains following columns..

I want to select records from this table where time difference is more than 2 min. (tec_insert_date) This means first record time and second one, then second one and third one..and so on..

How to select these records...pls give me some sql query...

thanks in advance

tec_number tec_insert_date tec_description
----------- ------------------------------------------------------ --------113909 2005-12-19 18:59:01.920 Description
113910 2005-12-19 18:59:02.043 Description
113911 2005-12-19 18:59:02.060 Description
113912 2005-12-19 18:59:02.060 Description
113913 2005-12-19 18:59:02.090 Description
113914 2005-12-19 18:59:02.090 Description
113915 2005-12-19 18:59:02.263 Description
113916 2005-12-19 18:59:02.437 Description
113917 2005-12-19 19:00:34.703 Description
113918 2005-12-19 19:00:34.720 Description
113919 2005-12-19 19:00:34.937 Description
113920 2005-12-19 19:00:35.607 Description
113921 2005-12-19 19:00:35.607 Description
113922 2005-12-19 19:00:35.840 Description
113923 2005-12-19 19:00:35.903 Description
113924 2005-12-19 19:00:36.200 Description
113925 2005-12-19 19:00:36.200 Description
113926 2005-12-19 19:00:36.217 Description
113927 2005-12-19 19:00:36.217 Description
113928 2005-12-19 19:00:36.217 Description
113929 2005-12-19 19:00:36.230 Description
113930 2005-12-19 19:00:36.230 Description
113931 2005-12-19 19:00:36.230 Description
113932 2005-12-19 19:00:36.230 Description
113933 2005-12-19 19:00:36.323 Description
113934 2005-12-19 19:00:36.450 Description
113935 2005-12-19 19:00:38.863 Description
113936 2005-12-19 19:00:38.943 Description
113937 2005-12-19 19:00:38.943 Description
113938 2005-12-19 19:00:39.100 Description
113939 2005-12-19 19:00:39.147 Description
113940 2005-12-19 19:00:39.300 Description
113941 2005-12-19 19:00:40.920 Description
113942 2005-12-19 19:01:23.363 Description
113943 2005-12-19 19:03:03.533 Description
113944 2005-12-19 19:03:08.197 Description
113945 2005-12-19 19:03:12.853 Description
113946 2005-12-19 19:03:14.087 Description
113947 2005-12-19 19:04:40.730 Description
113948 2005-12-19 19:04:44.843 Description
113949 2005-12-19 19:04:51.030 Description
113950 2005-12-19 19:04:56.313 Description
113951 2005-12-19 19:04:58.950 Description
113952 2005-12-19 19:09:19.950 Description
113953 2005-12-19 19:09:21.277 Description
113954 2005-12-19 19:09:21.340 Description
113955 2005-12-19 19:09:24.397 Description
113956 2005-12-19 19:09:35.660 Description
113957 2005-12-19 19:09:46.480 Description
113958 2005-12-19 19:09:47.790 Description
113959 2005-12-19 19:10:23.713 Description
113960 2005-12-19 19:10:23.980 Description
113961 2005-12-19 19:11:02.307 Description
113962 2005-12-19 19:11:52.040 Description
113963 2005-12-19 19:12:31.800 Description
113964 2005-12-19 19:12:31.940 Description
113965 2005-12-19 19:12:31.940 Description
113966 2005-12-19 19:13:10.500 Description
113967 2005-12-19 19:13:10.500 Description
113968 2005-12-19 19:13:50.697 Description
113969 2005-12-19 19:13:50.697 Description
113970 2005-12-19 19:13:50.743 Description
113971 2005-12-19 19:13:50.870 Description
113972 2005-12-19 19:13:50.883 Description
113973 2005-12-19 19:14:09.290 Description
113974 2005-12-19 19:14:47.680 Description
113975 2005-12-19 19:14:47.693 Description
113976 2005-12-19 19:14:48.630 Description
113977 2005-12-19 19:14:48.630 Description
113978 2005-12-19 19:14:49.127 Description
113979 2005-12-19 19:14:49.127 Description
113980 2005-12-19 19:14:49.160 Description
113981 2005-12-19 19:14:49.300 Description
113982 2005-12-19 19:14:49.313 Description
113983 2005-12-19 19:15:07.287 Description
113984 2005-12-19 19:15:07.783 Description
113985 2005-12-19 19:21:43.093 Description
113986 2005-12-19 19:22:01.920 Description
113987 2005-12-19 19:22:01.920 Description
113988 2005-12-19 19:22:20.780 Description
113989 2005-12-19 19:22:38.547 Description
113990 2005-12-19 19:22:38.547 Description
113991 2005-12-19 19:22:39.340 Description
113992 2005-12-19 19:22:39.340 Description
113993 2005-12-19 19:22:40.263 Description
113994 2005-12-19 19:22:41.010 Description
113995 2005-12-19 19:22:41.867 Description

View 3 Replies View Related

Select Max If Value Of Specific Field Is Y

May 15, 2014

I need to check if the latest record in a table for the current client, based on EFFECTIVE_DATE, has a value of 'Y' in the STATUS field. Sample records for client #19:

CLIENTEFFECTIVE_DATESTATUS
------ -------------- ------
19 08/13/2010Y
1901/10/2013N
1902/03/2014Y

If I run:
SELECT CLIENT, max(EFFECTIVE_DATE), STATUS
FROM FTABLE GROUP BY CLIENT, STATUS

I get the two latest records since STATUS is different:

CLIENTEFFECTIVE_DATESTATUS
------ -------------- ------
1901/10/2013N
1902/03/2014Y

I wrote the following and it works, but it may be causing 'Insufficient Disk Space' error from the database. Is there any way to write this query without temp table?

DECLARE @TEMPMAX

TABLE (CLIENT INT, EDATE DATE)
INSERT INTO @TEMPMAX (CLIENT, EDATE)
SELECT CLIENT_NO, max(EFFECTIVE_DATE)

[Code] ....

CLIENTEFFECTIVE_DATESTATUS
------ -------------- ------
1902/03/2014Y

View 3 Replies View Related

Select Specific Character

Dec 15, 2014

How to select specific character when you have a different length of characters. For example I have a columm where I have character ":". How to select only ":"?

View 2 Replies View Related

How To Select Specific Record.

Oct 24, 2007

Group_Code *****Station_nbr*****Beg_Eff_Date*****End_eff_date

00000002 D01G00733 1/1/2007 8/31/2007
00000002N D01G00733 4/1/2007 8/31/2007
00000002W D01G00733 1/1/2007 12/31/2007

For the report I just want to be able to pick up the first and the last line.

Using dbo.Station_group Table

Thank you for the help

View 14 Replies View Related

SELECT From A Specific Range Of Dates?

Aug 29, 2007

Hi all,Right now I have this SELECT statement:SELECT MUSIC_PK, MUSIC_TITLE, MUSIC_TITLE2, MUSIC_ORIGINAL_SINGER Now I want to add a second SELECT statement (same as above, but with an additional column) if the record was added within the 10 days (while still select other records, I just need to select an additional column). How would I do that? The additional column that I want to select is called MUSIC_NEW (so I can display if the record is new within 10 days.) I have a column in my table named DATE_ADDED, how do I go to calculate if it's within the 10 days since the day it was added to the current time?Thank you very much,Kenny.

View 8 Replies View Related

Select A Specific Number Of Rows

Aug 25, 2005

I am working on a multi-page datagrid that pulls data from a database. The issue I am running into is the SQL select query. What I have is a table to 55 items. What I need to do is grab the first 35 of those items and bind the resulting DataReader to the grid, print the page, then grab the remaining 20 items, bind to the grid and print the page.

I can use "SELECT TOP 35 FROM Table" to get the first 35 items, but I don't know how to get the remaining 20 items. Is there a way to say something like "SELECT TOP 20 FROM Table" but specify only the rows that begin after row 35?

I tried doing this with an ArrayList but couldn't bind it to the DataGrid.

Any suggestions?

View 10 Replies View Related

Select Specific Info From XML Field?

Nov 10, 2014

I have a table (InfoTable) with a field with XML info like this:

<Status>
<IdStatus>1<IdStatus>
<NomStatus>Status 1<NomStatus>
<IdStatus>2<IdStatus>
<NomStatus>Status 2<NomStatus>

]Code] ...

I want to be able to select then NomProcess where IdProcess=3, for instance.

How can I do it?

View 1 Replies View Related

Select Specific Number Of Records

Jul 20, 2005

Dear GroupI wonder whether you can give me a syntax example for a SQL Statement.Lets assume I've a table containing three columns ContactID (Primary Key),Firstname and Lastname.I would like to write a stored procedure which returns me the first tenrecords and increments an outside variable each time it runs.E.g If I run it the first time I pass the variable as 0 and it will returnme the first ten records and returns the variable value 1.When run a second time, I will pass the variable as 1 and it will return merecords 11-20 and sets the variable to 2 and so on...The difficult thing is how to tell to return me records 11-20. I can't usethe ContactID as someone might have deleted a row and e.g. ContactID 18 ismissing. In this case I only would get 9 rows returned. It always should beten.Thanks very much for your time and efforts!Kind Regards,Martin"There are 10 types of people in this world: Those that understand binaryarithmetic, and those that don't."

View 3 Replies View Related

Transact SQL :: Select With Value For Specific Month

Nov 13, 2015

I have table with below scheme

Year Month Day RELH
------ -------- ------ -------
1973 4 1 50
...... etc
1973 4 30 20
.....etc
1974 5 1 50
....etc
1974 5 30 99

I need to get years where average of RELH of months within year meet

Month 4 Average(RELH) > 33 and
Month 5 Average(RELH) > 60 and
Month 6 Average(RELH) < 33

How can I achieve this?

View 4 Replies View Related

Select Specific Number Of Rows

Mar 13, 2008

Hi,
Im using a select statement to query out the data from a table.

ex:- select * from tblperson

Now this select statement is returning me 500 rows

I want to see only the records between 100 - 200 out of these 500 rows..

Anyone help

View 13 Replies View Related

Select Specific Column In Front Of Star

Jul 8, 2014

In SQL Server I can select a specific column in from of * like so:

Code:
select test_column_1,* from testtable1

I've been googling around and cannot seem to be able to find a definitive answer.

View 1 Replies View Related

How To Select Specific 2 Rows Out Of A Huge Table

Jul 24, 2013

I have a very large table , and from that table I need just 2 records with column1 = 'A' and column1 = 'B' .

Here I don't think if I can not use OR or IN or Case operators because I need exactly 2 records not more.

View 6 Replies View Related

Select Columns For Specific Data From All Tables In DataBase

Oct 8, 2007

Hi friends,I need to select columns for specific data from all tables in DataBasePls give me reply asap Regards,M.Raj

View 4 Replies View Related

Transact SQL :: Select Unique From Table If Specific Value Does Not Exists

Jul 31, 2015

I have a table that has for each shop a value that can change over time.For example

BK_POS 1 --> Segment A
BK_POS 1 --> Segment /

What I would like to achieve is to get all distinct Shops (BK_POS) from the table above, but if for that specific pos a row exists where the segment = "/" then I do not want to take this BK_POS in my select query.More concrete, the for example above I do not want to select BK_POS 1 because he has one row where the segment = "/".

View 3 Replies View Related

Transact SQL :: How To Select Data With Specific Priority Of A Column

Aug 1, 2015

i have table that has rows as below

DECLARE @Table TABLE
(minv_code INT,
alert_msg varchar(10),
alert_time Datetime)

[code]...

i want to select the data priority wise. the o/p should look like

e.g first row - 873939, 'Meter', '7/24/2015 3:31:22'
second row - 873939, 'Tamper', '7/24/2015 3:30:00'
third row - 873939, 'Reverse', '7/24/2015 3:31:18'
fourth row -873940, 'Tamper', '7/24/2015 3:31:22'
fifth row - 873940, 'Reverse', '7/24/2015 3:30:00'

View 6 Replies View Related

SQL Server 2012 :: Select Case Statement To Remove Part Of String After One Or Two Specific Characters

Jun 3, 2015

I have an Address column that I need to Substring. I want to remove part of the string after either, or both of the following characters i.e ',' OR '*'

Example Record 1. Elland **REQUIRES BOOKING IN***
Example Record 2. Theale, Nr Reading, Berkshire
Example Record 3. Stockport

How do I achieve this in a CASE Statement?

The following two case statements return the correct results, but I some how need to combine them into a single Statement?

,LEFT(Address ,CASE WHEN CHARINDEX(',',Address) =0
THEN LEN(Address )
ELSE CHARINDEX(',' ,Address ) -1 END) AS 'Town Test'

,LEFT(Address ,CASE WHEN CHARINDEX('*',Address ) =0
THEN LEN(Address)
ELSE CHARINDEX('*' ,Address ) -1 END) AS 'Town Test2'

View 8 Replies View Related

SQL Server 2008 :: Replicate Only Specific Data To Specific Subscriber?

Jun 30, 2015

We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.

Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?

View 2 Replies View Related

Can Logging Be Turned Off On Inserts To A Specific Temp Table From A Specific Sp?

Oct 10, 2007

I want to ship 500,000 aged transactions each night to an archive table and delete them from their source table in one or more logical units of work (LUW). Each row is approx 60 bytes and there is only one non clustered index on the source table presently.

I'm trying to weigh the pros and cons of 3 alternatives. One of them would basically insert the non-aged rows into tempdb, ship the aged records, truncate the table and then insert the tempdb records back into their source all in the same LUW.

For this alternative, I'd at least like to turn off logging when the records get inserted into tempdb as I dont see any value in logging that part of the activity. Is this possible?

View 4 Replies View Related

Command Line Printing To Specific Printers, And Specific Trays

Jan 23, 2007

Hi All,

Could you guys please help me with printing reports invoked thru command line/ URL access to print automatically to specific printers and specific trays and also is it possible to set the specific printer and tray as parameters.

Any suggestions is appreciated

Thanks A lot in advance

e,g :

http://localhost/reportserver?/testreports/employee sales&UserID='ABC'&LName=Lastname='victor'&rs:Command=Render

View 1 Replies View Related

Assign Specific Data To Specific Users

Mar 21, 2008

I am very early on in developing a website to track issues with projects which is tied to a SQL database. I have my Projects Table, my Users Table, and am creating a third table to track issues. I'm wondering what is the best way to assign specific users to specific data/projects. The user should only be able to view & update the projects assigned to him. He should not be able to see other projects. What is the best way to assign projects/data to the users to make sure they are only viewing their data?

View 1 Replies View Related

Help On Partition

Jul 6, 2006

i have a table named table1 sitting on a a partittion scheme px.

table1 is partitioned on u_id by tens,

first partion u_id=0 to 9

second partion u_id=10 to 19

third partion u_id=20 to 29

ans so on and so forth

i have a table named table2 with

records having u_id = 13 to 16

obviously belonging to the second partion.

i want to load table2 to table1 as fast as i could with

the following requirements:

all contents of partition 2 of table1 must be deleted before loading

table2 ceases to exist after the operation

how will i do that.

thanks.

View 1 Replies View Related

Help With Partition

May 15, 2008

Hi All,

Can someone take a look at my code and tell me what i'm doing in wrong. The script runs fine but when i go to table property it says the table is not partitioned. Thanks for your help.

create database [mypartition]
go

--CREATE FILEGROUP
USE [mypartition]
GO
ALTER DATABASE mypartition ADD FILEGROUP Y2000_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2001_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2002_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2003_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2004_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2005_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2006_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2007_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2008_filegroup
ALTER DATABASE mypartition ADD FILEGROUP Y2009_filegroup

--CREATE FILES
USE mypartition
GO
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2000,
FILENAME = 'F:ss_datadatadetail_2000.ndf',
SIZE = 2MB)
TO FILEGROUP Y2000_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2001,
FILENAME = 'F:ss_datadatadetail_2001.ndf',
SIZE = 2MB)
TO FILEGROUP Y2001_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2002,
FILENAME = 'F:ss_datadatamdetail_2002.ndf',
SIZE = 2MB)
TO FILEGROUP Y2002_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2003,
FILENAME = 'F:ss_datadatadetail_2003.ndf',
SIZE = 2MB)
TO FILEGROUP Y2003_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2004,
FILENAME = 'F:ss_datadatadetail_2004.ndf',
SIZE = 2MB)
TO FILEGROUP Y2004_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2005,
FILENAME = 'F:ss_datadatadetail_2005.ndf',
SIZE = 2MB)
TO FILEGROUP Y2005_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2006,
FILENAME = 'F:ss_datadatadetail_2006.ndf',
SIZE = 2MB)
TO FILEGROUP Y2006_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2007,
FILENAME = 'F:ss_datadatadetail_2007.ndf',
SIZE = 2MB)
TO FILEGROUP Y2007_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2008,
FILENAME = 'F:ss_datadatadetail_2008.ndf',
SIZE = 2MB)
TO FILEGROUP Y2008_filegroup;
ALTER DATABASE mypartition
ADD FILE
(NAME = mypartition_detail_2009,
FILENAME = 'F:ss_datadatadetail_2009.ndf',
SIZE = 2MB)
TO FILEGROUP Y2009_filegroup;

--CREATE PARTITION FUNCTION
USE [mypartition]
GO
CREATE partition FUNCTION detail_part_function (varchar(10)) AS
RANGE LEFT FOR VALUES('2001','2002','2003','2004','2005','2006','2007','2008')
GO

--CREATE PARTITION SCHEME
USE [mypartition]
GO
CREATE PARTITION SCHEME detail_part_scheme AS
PARTITION detail_part_function TO
(Y2000_filegroup, Y2001_filegroup,Y2002_filegroup,Y2003_filegroup,Y2004_filegroup,Y2005_filegroup,Y2006_filegroup,Y2007_filegroup,Y2008_filegroup,Y2009_filegroup)
GO

-- Now just create a table that uses the particion scheme
USE [mypartition]
GO
/****** Object: Table [dbo].[partitioned_table] Script Date: 05/14/2008 09:44:21 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[partitioned_table](
[id] [int] NOT NULL,
[fiscal_year] [varchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_partitioned_table] PRIMARY KEY CLUSTERED
(
[id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON detail_part_scheme(fiscal_year)

GO
SET ANSI_PADDING OFF

View 7 Replies View Related

Partition On Value

Feb 9, 2006

I can see lot of documentation on Range Partitioning. Is there any other type of partition supported in SQL Server 2005?

For example, I have a Fact table having Billion rows. It has a column called BATCH_ID. A BATCH_ID corresponds to 10-20 Million rows and it is a running sequence number like 1,2,3 etc. (not an identity column). Is there anyway I can specify a partition function with BATCH_ID column as an int value? Will the SQL Server automatically does the partition on each int value in that case? If not, what is the best way to do it?

Thanks in advance for all help in this

View 3 Replies View Related

Os Partition Problems

Jul 3, 2004

Hi,
I recently installed MSSQL 2000 and sp3a onto a windows 2003 server in a test lab. I configured one big c: partion on this os and installed the db in the default location.

I need to detach the db's on this server and re-attach them onto another MSSQL 2000/sp3a server running 2003 os with a partition scheme like this:

c: = 20 gigs for the os
e: = 600 gigs for the data

I could not re-attach the db's onto the e:default path odatabase

Is there a work-around for this? This makes sense to me as to why it is not working and was an install oversight on my part but there has to be a way to overcome this delima?

Thanks in advance,
damnit

View 1 Replies View Related

Table Partition

Nov 22, 2005

Hi

Please help me how to do the Horizontal table partition??
I have to split the table in to multiple sub tables with same columns and less rows and then I have to use each sub table.

Thanks you in advance....

Regards
LakshmiPK

View 1 Replies View Related

PROCESS A Partition.

Oct 10, 2007

Hi everybody

Does anyone know where I can find code to PROCESS a Partition using DSO.

Thank a lot.

View 2 Replies View Related