I created a load of packages on my SQL standard edition. I have now gon eto a Workgroup edition and tried to run the packages but am getting the following error
".....cannot run on this edition of integration services. It requires a higher level edition"
Isit a fact that you cannot run SSIS packages on SQL workgroup edition? Do I have to upgrade to Standard?
I've read some threads on this topic and all have been solved by installing the SSIS service. This would be fine except for the fact that I already have SSIS installed and working on the server the package is being called from.
I have several scheduled packages that work without error and a few that fail, telling me "Error: ... it requires a higher level edition." Does SSIS need to be installed on the target server as well? Do I need to do a reinstall? Please advise. Thanks.
-Matt
Error code: 0xc0012024
Using "Integration Services Project" template in Business Intelligence Studio. Using platforms Visual Studio 2005 along with SQL Server 2005.
Getting the error while trying to execute package after loading it programmaticaly.
I've just one task "Transfer SQL Server Objects Task" on my Integration Services package. But when I try to execute it from VS 2005 project programmaticaly, it gives the above mentioned error.
The commands I use:
Package pkg = new Package();
pkg = a.LoadPackage(@"C:Documents and SettingsabcMy DocumentsVisual Studio 2005ProjectslSSISSSISPackage.dtsx", null, true);
DTSExecResult dResult = pkg.Execute();
The the error comes like: error: 0xc0012024 The task Transfer SQL Server Objects Task cannot run on this edition of Integration Services. It requires higher level edition.
Please help me.
Thanks in advance,
Bhupesh
I have a developer here that created an SSIS package that contains a Send Mail Task. When this developer runs the package in the Business Intelligence Development Studio (BIDS) the send mail task runs without issue. But when he tries to run it using command line and the DTEXEC program it errors out with the following error message:
Error: 2007-08-01 15:57:44.37
Code: 0xC0012024
Source: Send Mail Task
Description: The task "Send Mail Task" cannot run on this edition of Integration Services. It requires a higher level edition.
End Error
Warning: 2007-08-01 15:57:44.37
Code: 0x80019002
Source: ELMSFeed
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:57:24 PM
Finished: 3:57:44 PM
Elapsed: 19.922 seconds
Here are the details of his machine:
Visual Studio 2005 Version: 8.0.50727.762 (SP.050727-7600)
Under the Installed Products section it reads:
SQL Server Integration Services version: 9.00.3042.00
Once we promoted the package to a production server it runs fine. I can also run the same package from my machine without issue. So, I'm pretty sure that it's specific to his machine, but I have no idea where to start looking.
Any deas where this error comes from?
Hi,
I am receiving the following error in Sql Job agent when I try to run an SSIS package : The task "Create Excel File" cannot run on this edition of Integration Services. It requires a higher level edition. It then goes on to tell me : The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. I have tried reseting the error count to allow for the "errors" , but it stills fails. The job suceeds in Visual Studio, but not when scheduled in Sql Management Studio. Any suggestions?
Thanks,
J.
Hi there,
I was wondering how can I get the value of System::TaskName of a higher scope when I have a Master Package that have several sequence task, data flow tasks and execute package tasks. For each task inside this Master Package on the Post-Execute event handler I have a script task that logs the execution of each task.
After running this master package I saw in my db that I have a row for every single tasks executed in the process and not only the tasks that exist in the master package. For instance, for simplicity let's say my master package looks like this:
SQL Task Script
|
Exec Package 2
|
Exec Package 3
|
Exec Package 4
Package 2,3 and 4 have a SQL Task Script with name Execute SQL Task Package 2, Execute SQL Task Package 3, Execute SQL Task Package 4.
Here's what I got in my db:
Execute SQL Task
Execute SQL Task Package 2
Package2
Execute Package 2
Execute SQL Task Package 3
Package3
Execute Package 3
Execute SQL Task Package 4
Package4
Execute Package 4
I see two TaskName variables in the Variable window, one with OnPostExec scope and the other with Execute Package 2 for instance. I want to get the value of System::TaskName with Execute Package 2 scope.
I want to see in my db only the tasks in bold. Any ideas of how can I do this? I hope you understand what I'm trying to achieve.
Thanks!
I have 2 higher level column groupings of month name and year above my actual date groups. It looks a little weird aligning them left but there is no guarantee that centering them will even allow them to show until I've scrolled right to the middle of the cell width that they occupy.
Is there a feature that comes with, or a well known trick for making them center in the area that is being viewed instead of the potentially very wide cell that they occupy?
Hi All.
I have a parameter (hidden) that gets its value using an expression base on another parameter.
When in the designer, the first time when the designer loads I can select the Parameter that controls the child parameter (expression lies in the default value section). The value changes.
When I change the parent parameter again, the value of the child parameter does not seem to change.
How can I make this parameter change automatically when the parent is changed ?
Any help will be appreciated.
Thanks,
Neil
I developed a package in BIDS which simply runs a query, does a data conversion on one field, then exports to Excel. This works fine in BIDS. When I import the package to the server, I receive the Product Level is Insufficient error for both the data conversion component and the excel destination.
I have verified that SSIS is installed and the service is running. I have verified that SP1 is installed.
Some other things about the environment:
- Running x64 versions of Windows and SQL 2005
- Did not install the workstation tools on the server
Any suggestions?
We had a disaster last week (SAN Corruption) and it hit a bunch of my sql serves.
I have been able to recover all but one. The one I am having a problem with is a NAMED Instance that I obviously don't know the original SP level on. When I try to restore MSDB it won't let me because of a version conflict
Is there any way to tell what the SP Level is either from a system DB .mdf or LDF file or from a backup file without restoreing?
Right now I'm installing SQL Server to a test server and I'm going to try and restore the system dbs at each patch level.. seems like there must be a better way!!
Why would my int identity primary key column go from one day being 847 and the next number being inserted to 49048?
View 2 Replies View RelatedHI
I am facing a strange problem with SQL Server 2005 . The CPU utilization with SQL Server 2005 is higer by about 70% comapared to SQL 2000.
In the same kind of Hardware and with the DB server up , I performed the following tests
Declare @i int
Set @i = 10
While @i < 100000
Begin
Insert into arup_emp values(@i,'M',0)
Set @i = @i + 1
end
The CPU utilization average on SQL 2005 was 45% and on SQL 2K it was just 25% , I am seeing a lot of people who seems to be facing this problem but unfortunately not seeing any solution to this.
Can anyone through some light .
Please note that I have tried to also see the MAXDOP options, but get the same results.
Please help.
Thanks
Arup
I am trying to determine the next registered session of a student so Ican calculate the number of skipped sessions.Scenario: I have a student registration summary table. One row foreach student and the student's registered session. I want to update agiven row with the next higher registered session (into a field callednext_registered_session_skey if the row exists). I can then use thediff of the skeys to determine how many sessions the student skippedfor each registration period.Example: Student X registers each fall for one session for 4 years.The file might look like:STUDENT_ID SESSION_ID SESSION_SKEYNEXT_REGISTRED_SESSION_SKEY123456789 200201 100null123456789 200301 104null123456789 200401 108null123456789 200501 112nullI need to update the NEXT_REGISTRED_SESSION_SKEY so I end up with:STUDENT_ID SESSION_ID SESSION_SKEYNEXT_REGISTRED_SESSION_SKEY123456789 200201 100104123456789 200301 104108123456789 200401 108112123456789 200501 112nullI can then say SESSIONS_SKIPPED = NEXT_REGISTRED_SESSION_SKEY –SESSION_KEY (logically speaking, not syntactically)This is what I have so far as example:UPDATE F_REGISTRATIONSET NEXT_REGISTERED_SESSION_SKEY = (select top 1 nextr.session_skeyfrom f_registration rinner joinf_registration nextron r.student_skey = nextr.student_skey and nextr.session_skey[color=blue]> r.session_skey[/color]order by r.session_skey desc)WHERE STUDENT_ID = '577665705';SELECT student_skey, student_id, session_id, session_skey,next_registered_session_skey, * FROM F_REGISTRATION WHERE STUDENT_ID= '577665705' order by session_skey descRESULTS:STUDENT_SKEY STUDENT_ID SESSION_ID SESSION_SKEYNEXT_REGISTERED_SESSION_SKEY125137 577665705 200404 309 311125137 577665705 200403 308 311125137 577665705 200402 307 311125137 577665705 199804 285 311125137 577665705 199803 284 311125137 577665705 199802 283 311125137 577665705 199704 281 311TIARob(I restricted with the where = ‘577665705' so I did not have to waitto update all the rows)
View 6 Replies View RelatedI want to read data from a XML into SQL Server database tables "tour" and "stop".
There is a 1:n relation between tour and stop.
(a shortened XML sample, relation Tour : Stop = 1 : n)
<Tour>
<Mandator>mein kunde</Mandator>
<TourNoPlan>TNP_1</TourNoPlan>
<TourNo>1</TourNo>
<Stop>
<StopNo>SN_1</StopNo>
<GPSGeoDec>+8.0000,+48.0000</GPSGeoDec>
</Stop>
<Stop>
<StopNo>SN_2</StopNo>
<GPSGeoDec>+8.3000,+48.5000</GPSGeoDec>
</Stop>
</Tour>
I am able to insert elements from <Tour> into the table "tour" with the data flow in the Integration Services. But I need the values from the tag <TourNoPlan> in the rows for the table stop (it is the foreign key) in the second step. How can I get the values in the SSIS from the <Tour> in the dataflow for the different <stop>? It is a hierarchicle structure - normal for a XML. Is there a sample for reading such a XML into a Database? I have tried it with [Tour::TourNoPlan] or similar, but it was wrong. Second try was setting a UserVariable in the tour dataflow to the actual value of the TourNoPlan and using it in the data flow for the stop tags - but only a setting in a script at PostExecution was possible - to late.
I think a very simple problem and the same for each XML Import. Any ideas ???
Thanks and Best regards
Wolfram
Hi Friends,
I have a system with windows 2000 advanced server SP4 OS. In that system, How can i upgrade MDAC version from 2.5 to 2.8 sp2.
This is use of,
I am going to install sql server 2005 express edition advanced services SP2.
Please help me, how can i upgrade higher version of MDAC?
Thanks in Advance
Rameshkumar Thirumalaisamy
I'm developing and sql 2008 view that shows me the last month of sales of every customer and every item sold, the problem is that I need group by customer with the higher Sale Price of every item of the customer, example:
1.If We sold the same item to one customer then it must show just the higher sale price of every item
2.If the same item was sold to the same customer at the same price then it must show just the last sold date record of that item
This is I get :
OrderDate |DebNr|DebName|ItemCode|Descript|Qty|CostPrice|SalePrice|
2015-03-05|0001 |Deb0001|Item-001|Item 001| 3 | 223.10 | 289.00 |
2015-02-25|0001 |Deb0001|Item-001|Item 001| 2 | 220.00 | 286.00 |
2015-03-05|0001 |Deb0001|Item-002|Item 002| 1 | 75.00 | 110.00 |
2015-03-02|0002 |Deb0002|Item-001|Item 001| 1 | 218.00 | 265.00 |
2015-02-27|0002 |Deb0002|Item-001|Item 001| 1 | 218.00 | 265.00 |
This is I need :
OrderDate |DebNr|DebName|ItemCode|Descript|Qty|CostPrice|SalePrice|
2015-03-05|0001 |Deb0001|Item-001|Item 001| 3 | 223.10 | 289.00 |
2015-03-05|0001 |Deb0001|Item-002|Item 002| 1 | 75.00 | 110.00 |
2015-03-02|0002 |Deb0002|Item-001|Item 001| 1 | 218.00 | 265.00 |
This is my code :
SELECT TOP (100) PERCENT OrderDate, DebtorNr, DebtorName, ItemCode, Description, Qty, CostPrice, SalePrice
FROM dbo.VK_SALE_ORDERS
WHERE (OrderDate >= DATEADD(MM, - 1, GETDATE()))
ORDER BY DebtorNr, ItemCode
I'm reading <inside sql server 2005torage engine> recently.
The author mentioned about " If the LSN on the page is equal to or higher than the actual LSN for this log record, SQL Server will skip the REDO operation" in chapter 5 and section 1.
As we all know,the transaction log will be written before the changes to the database are written.
So i think the the LSN on the page is equal to or lower than the actual LSN for this log record....
Any suggestions?
I have bunch of heap tables and the fragmentation seems to be high, i am not sure whether i shall add index for them, as these tables are inserted and updated every day.
View 4 Replies View RelatedI want to perform column level and database level encryption/decryption....
Does any body have that code written in C# or VB.NET for AES-128, AES-192, AES-256 algorithms...
I have got code for single string... but i want to encrypt/decrypt columns and sometimes the whole database...
Can anybody help me out...
If you have Store procedure in SQL for the same then also it ll do...
Thanks in advance
Hi,
AM in need of SSRS 2005 design documents for a project purpose. Can somebody let me know where can i find these documents? Thanks in advance
I develop basic websites. I have been contracted by a music company to develop a site using a database to do the following:
Search for music by genre/keyword -> display the results in the following format:
Song Name | Artist Name | Keywords | Description | (MP3 icon linked to download) | (WMA icon linked to download)
The site will have an additional database of users who must login before they can reach the above page, also with the facility to track what each person downloads/searches etc. Any assistance on where I should start, what scripts to use etc. would be much appreciated. Cheers -andrew
Hello,
I tried to run my application on another computer but then I got this error:
'An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.' ( well this is only the first line )
When I tried to do something with the database inside my application. So I installed SQL (and I had to install .net framework 2.0 also). And then my applicaton worked.
But now my question: Is it possible to run my application, and use the database, without having to install all those things first, when I want to use it on other computers?
Thanks in advance,
Ruben Pieters
OK I am trying the following select statement but I am getting a 'DISTINCT requires ORDER BY to be used' error. I have an ORDER BY in it so I am not sure what I have missed?
SELECT DISTINCT tbl_final_CP.ExtEnum + tbl_final_CP.ExtEnum AS [Full Cost]
FROM tbl_final_CP INNER JOIN
ContractorAreaRelationship ON tbl_final_CP.Area = ContractorAreaRelationship.AreaNo INNER JOIN
tbl_CPCost ON tbl_final_CP.CP = tbl_CPCost.CP
WHERE (DATEPART(yyyy, tbl_final_CP.dCount) = DATEPART(yyyy, GETDATE())) AND (ContractorAreaRelationship.ContractorNumber = 6112) AND
(DATENAME(mm, tbl_final_CP.dCount) = 'Conwy') AND (ContractorAreaRelationship.AreaName = 'Conwy') AND (tbl_final_CP.Video > 0) OR
(DATEPART(yyyy, tbl_final_CP.dCount) = DATEPART(yyyy, GETDATE())) AND (ContractorAreaRelationship.ContractorNumber = 6112) AND
(DATENAME(mm, tbl_final_CP.dCount) = 'March') AND (ContractorAreaRelationship.AreaName = 'Conwy') AND (tbl_final_CP.ExtEnum > 0) OR
(DATEPART(yyyy, tbl_final_CP.dCount) = DATEPART(yyyy, GETDATE())) AND (DATENAME(mm, tbl_final_CP.dCount) = 'March') AND
(ContractorAreaRelationship.AreaName = 'Conwy') AND (tbl_final_CP.Video > 0) AND (ContractorAreaRelationship.AdminID = 6112) OR
(DATEPART(yyyy, tbl_final_CP.dCount) = DATEPART(yyyy, GETDATE())) AND (DATENAME(mm, tbl_final_CP.dCount) = 'March') AND
(ContractorAreaRelationship.AreaName = 'Conwy') AND (tbl_final_CP.ExtEnum > 0) AND (ContractorAreaRelationship.AdminID = 6112)
ORDER BY tbl_final_CP.CP, tbl_final_CP.ExtEnum + tbl_final_CP.ExtEnum
I am working for a client that would has XML data being passed into a Service Broker queue.
View 8 Replies View RelatedWhen I tried to browse the reportserver url. The IE 7.0 asks me for Username and password. I feel, its some settings related to security. But other sites created are working fine. The virtual directories created using Repoting services configuration manager only ask me username and password.
Any suggestions.
Murali.
Hey
i have a table A that contains 3 columns : id, entry ,sessionid
i want to create a view on this table that will contain
- for each sessionid s in A --> select top 5 rows having s as sessionid and ordered by id desc
(s can have 1 or 2 or 5 or 300 entries i want to get only the latest 5 rows that correspond to this session)
I tried many queries and different combinations i could find one yet to do the following.
Can anyone help me plz?
Can we have a loop in a view?is it possible?
Hey Guys,
I'm having problems with my SQL statement and Im wondering if anyone could help? My code is below.
The Label6 is filled up using a previous SQL Statement, and when Ive had a fiddle around it is using the KnowledgeID It works in reading in the date, it just doesnt appear to want to work for the second statement as I am getting the error shown in the subject.
Thanks in advance =)
C# Codeprotected void Button2_Click(object sender, EventArgs e)
{KnowledgeID = Convert.ToInt32(Label5.Text);
string path = Server.MapPath(" ") + "\X_Drive\";FileLocation = path + Convert.ToString(FileUpload1.FileName);SqlConnection myConnection = new SqlConnection(myConnectionString);
SqlCommand myCommand2 = new SqlCommand("select * from Knowledge WHERE KnowledgeID = '" + KnowledgeID + "'", myConnection);
myConnection.Open();
SqlDataReader myReader = myCommand2.ExecuteReader();if (myReader.HasRows)
{while (myReader.Read())
{Add = myReader["DateAdded"].ToString();
}
myReader.Close();
}
else
{
myConnection.Close();
}
SqlTransaction trans = myConnection.BeginTransaction();
{
try
{
SqlCommand myCommand3 = new SqlCommand("Select ISNULL(MAX(Version,0)+1 FROM Archive WHERE KnowledgeID = "+KnowledgeID+"",myConnection);
myCommand3.Transaction=trans;int nextVersion =(int)myCommand3.ExecuteScalar();if (File != null)
{myCommand3 = new SqlCommand("INSERT INTO Archive (FixName, Description, Location, DateAdded, DateArchived, Version, KnowledgeID) SET (@FixName,@Description,@File,@Add,@AddDate,@SAPPS,@Version,'" + KnowledgeID + "')", myConnection);
}
else
{myCommand3 = new SqlCommand("INSERT INTO Archive (FixName, Description, DateAdded, DateArchived, Version, KnowledgeID) SET (@FixName,@Description,@Add,@AddDate,@SAPPS,@Version,'" + KnowledgeID + "')", myConnection);
}myCommand3.Parameters.AddWithValue("@FixName", TextBox1.Text);
myCommand3.Parameters.AddWithValue("@Description",TextBox2.Text);myCommand3.Parameters.AddWithValue("@File",FileLocation);
myCommand3.Parameters.AddWithValue("@Add",Add);myCommand3.Parameters.AddWithValue("@AddDate",AddDate);myCommand3.Parameters.AddWithValue("@Versions",nextVersion);
myCommand3.ExecuteNonQuery();
trans.Commit();
}catch (Exception ex)
{
//TextBox2.Text = ex.Message;
trans.Rollback();
myConnection.Close();
}
//}
Substring ('(' + left(@phone,3) + ')') + substring(@phone,4,3) + '-' + substring(@phone,7,4) + 'x' + right(@phone,4) getting an error on this code help please.
View 2 Replies View RelatedHello All,
I have a commercial application built for Pocket PC's that connects to SQL Server 2005 via TCP/IP over wireless networks. In installations for our sales people we installed SQL 2005 Express on their notebooks for demonstrations. In one of these installs we are getting the following error message: "An error occurred - SQL Server requires Encryption On". We do not use encrypted connections and I have verified encryption is turned off in the Options tab in SQL 2005 login screens.
Here is the connection string we use in the app.config file on the Pocket PC's:
<add key="connStr" value="Data Source=192.168.0.19,1433;Initial Catalog=SQL0018;User ID = User01;Password=PW01"/>
Other apps on the notebook are connecting to this same SQL Server without any issues. Thank you in advance for any help here,
Jack
Hello,
Im a bit of a novice at this so please bare with me
Does anyone know how to convert a .mdf to .csv as my hosting provider will only allow .csv importing to there SQL servers.
Plus will my data base work in this .csv format. (comma separated value)
Thanks in advance
Hello All,
I have a commercial application built for Pocket PC's that connects to SQL Server 2005 via TCP/IP over wireless networks. In installations for our sales people we installed SQL 2005 Express on their notebooks for demonstrations. In one of these installs we are getting the following error message: "An error occurred - SQL Server requires Encryption On". We do not use encrypted connections and I have verified encryption is turned off in the Options tab in SQL 2005 login screens.
Here is the connection string we use in the app.config file on the Pocket PC's:
<add key="connStr" value="Data Source=192.168.0.19,1433;Initial Catalog=SQL0018;User ID = User01;Password=PW01"/>
Other apps on the notebook are connecting to this same SQL Server without any issues. Thank you in advance for any help here,
Jack
Hello All,
I have a commercial application built for Pocket PC's that connects to SQL Server 2005 via TCP/IP over wireless networks. In installations for our sales people we installed SQL 2005 Express on their notebooks for demonstrations. In one of these installs we are getting the following error message: "An error occurred - SQL Server requires Encryption On". We do not use encrypted connections and I have verified encryption is turned off in the Options tab in SQL 2005 login screens.
Here is the connection string we use in the app.config file on the Pocket PC's:
<add key="connStr" value="Data Source=192.168.0.19,1433;Initial Catalog=SQL0018;User ID = User01;Password=PW01"/>
Other apps on the notebook are connecting to this same SQL Server without any issues. Thank you in advance for any help here,
Jack
I have a situation that I was wondering if anyone has ever ran into before. It has to do with one of my MS SQL servers. The hardware is a ALR/Gateway 9000R with 4 PP200's, 1 Gb RAM, and a RAID 5 with 72 Gb storage. The NIC card is an ATM 155 Mbit card connected directly to our fiber backbone.
I have WinNT 4.0 Server Enterprise Edition loaded with SP4 and MS SQL Server 6.5 Enterprise Edition with SP5 installed.
I have 7 seperate active databases on the server supporting 7 different applications. The server has been on-line for approximately 4 weeks and just recently (last Thursday) it has started to "lock up" every couple of days. By lockup I mean that it starts to reject all requests by all users. No one can connect to the server including myself. The MS SQL error log grows and grows until we reboot the server. The error logs are 100 Mb or larger in size due to rejection errors being repeated over and over again.
There has been no change made to the server since initial installation.
The error in the MS SQL error log that keeps on being repeated is...
"Message 17308: Kernelerror - Lazywriter. Process (process ID number) generated access violation; SQL Server is terminating this process."
We have an incident in with Microsoft but they are not responding fast enough.
I was hoping that someone out there may have had this type of occurrance happen before.
Any suggestions?
Jim