[JavaScript Error] Cannot Delete User Or User's Authority In Specific Report After Install SQL SP2

Jan 23, 2007

 Hi,

I have several reports for users to view on our Intranet. After installation of SQL 2005 SP2 patch, I cannot delete user or user's authority from Report in Properties Tab. An error message was shown on the status bar. It indicated that JavaScript Error: 'Return' statement outside of function. Seems something wrong with the 'Delete' funciton in SQL 2005 after update. The other functions worked fine. Could you point me out how to fix it or need to install any updates / hotfix. Thanks a lot!

Regards,

Kenneth Lai
Programmer


Error Pic


Message Box

 

View 1 Replies


ADVERTISEMENT

JavaScript Error When Deleting User From Report

Jan 22, 2007

Hello,

Have a problem here needs urgent help. We are on SQL Server 2005, just recently installed SP2. Not sure if the problem is related to that but just now I tried to delete a user from a report (Properties > Security > Delete) I got a JavaScript error exclaimation mark at the bottom of my browser, when I clicked on it, it showed javascript error: 'return' statement outside of function.

The delete user function worked well all along until today, our IT installed SQL 2005 SP2 last week, not sure if it is related. Any solution? (uninstalling SP2 is not an option). and all other javascript functions worked well except the remove user in the security setting..I have no idea what is wrong..

Please advise!! HELP!!!!!

Thanks in advance.

casey

View 2 Replies View Related

User Specific Report

Mar 28, 2007

Greetings all

My question is I want to be able to create a report specific to each individual user. More specifically I want to be able to create one report and once the user logs in with the appropriate credentials, I want the report to populate based on those credentials. Another important aspect is that each individual only sees their data. So once again I need to report to populate from the database based on the users logon credentails



any suggestions??

thanks in advance

KM

View 2 Replies View Related

Login Failed For User 'NT AUTHORITY/SYSTEM'.

Jun 9, 2008

Hi,
I can view the site fine on VS developlement sever, but not through IIS 7. Whenever i try to run it, i get this error: Login failed for user 'NT AUTHORITY/SYSTEM'. The problem is that i am not using this user to access my database, so i don't know where it came from. I mapped this new user to my database and changed my web.config file accordingly to see if it works, but it did not.
i have looked high and low for this, but i don't seem to find a solution that solved my problem. I am running Vista, IIS 7 and have forms security on my website.
Any suggestions will be very much appreciated.
E

View 5 Replies View Related

Error When Trying To Delete User

Oct 27, 2006

I created many test users in my application while trying to get a custom registration process to work, and now I would like to delete those users so they don't use up space in my database. When I go into the aspnet_Users table and try to delete a user, it gives me the following error:-------------------------------- DELETE statement conflicted with COLUMN REFERENCE constraint 'FK__aspnet_Me__UserI__0F975522'. The conflict occurred in database 'DB_83996', table 'aspnet_Membership', column 'UserId'.DELETE FROM [DB_83996].[dbo].[aspnet_Users] WHERE 1=0 OR ( [UserId] = '{7E864A07-6FE8-46EF-A2B8-354646D57C76}' )-------------------------------- I don't know much about SQL statements, so is that statement it gave me the statement I need to use to delete that particular user? If not, how would I go about deleting these users I don't need anymore?Thanks so much. :) 

View 2 Replies View Related

Show User Groups Associated With User ID Report From Active Directory

Jan 11, 2008



Hello. I am trying to write a report that pulls information in from Active Directory. I have a view created that gets a listing of users and a view that creates a listing of user groups, but I can't seem to figure out how to get all user groups that are associated with the users. This is what I have.



SELECT TOP 100 PERCENT *
FROM OPENQUERY(ADSI, 'SELECT cn, groupMembershipSAM FROM ''LDAP://wmdomain.local'' WHERE objectcategory=''group''') Rowset_1



SELECT *
FROM OPENQUERY(ADSI,
'SELECT title, displayName, sAMAccountName, givenName, telephoneNumber, facsimileTelephoneNumber, sn
FROM ''LDAP://wmdomain.local''
WHERE objectCategory = ''Person'' AND objectClass = ''user''')
Rowset_1



Let me know if you have any suggestions!



BJ

View 1 Replies View Related

Cannot Add Windows User, Cannot Delete Sql User

Jul 23, 2005

We were using sql authentication on our sql server 2000 servers, Butneed to use windows authentication. I have an sql user jdoe that ownsmany different objects in multiple databases. I have tried adding thewindows login of jdoe with the exact same permissions as the sql userjdoe, but it complains because it says jdoe already exists. So Iattempt to delete the sql user of jdoe (remembering the permissions soI can reapply them to the windows user soon to be created) But it says"you cannot drop the selected login id because that login id ownsobjects in one or more databases" So now I am trying to figure out howto change the ownership of those many many objects in the manydatabases from jdoe to dbo so I can delete this sql user of jdoe. Doesanyone know of a way to convert an sql login to a windows login? Or ifthat can't be done, how to change the owner of many objects to dbo so Ican delete this user? Maybe a T-SQL script or stored procedure. Thereis a stored procedure called sp_changeobjectowner but that only worksfor one object, how would I do that on all the objects that jdoe owns?As you can see I am a newbie but I appreciate any help you canprovide!!! Thanks in advance!

View 3 Replies View Related

Failed To Generate A User Instance Of SQL Server Due To Failure In Retrieving The User's Local Application Data Path. Please Make Sure The User Has A Local User Profile On The Computer. The Connection Will Be Closed

Dec 7, 2006

This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee

View 3 Replies View Related

Can't Install SQL Server 2005 SP2: Error 29512 - Unable Add User To Local Group

Oct 11, 2007

I've noticed at least five other posts on the web with this problem with no solutions given. Seems there are MANY people with this particular problem--hint:Microsoft Pay Attention. Help!

When installing SP2 for SQL Server 2005 I get this error message:

MSI (s) (E0!68) [09:02:25:673]: Product: Microsoft SQL Server 2005 (64-bit) -- Error 29512. SQL Server Setup was unable add user OUR-LAN-DOMAINOUR-SERVICE-ACCOUNT to local group OUR-LAN-DOMAINSQLServer2005SQLAgentUser$OUR-DATABASE-SERVER-NAME$MSSQLSERVER.

The error message seems to contradict itself: it says "local group" which seems to me to mean the group on the database server itself YET the group name is prefixed with our LAN domain name. So which one is it?

Also, I'm not sure if this message means there is a problem in Active Directory or in the security model of SQL Server itself. I don't think it means SQL Server itself because I don't think SQL Server has groups... it only has Roles, right?

We looked in Active Directory and the user above does indeed exist in the domain-level group mentioned.

Please help!

View 9 Replies View Related

Error Login Failed For User ''. The User Is Not Associated With A Trusted SQL Server Connection.

Feb 18, 2008

All the research I found dealing with this problem is that the solution is to set SQLserver to mix mode.  I have SQL server already set to mix mode. I am not sure what else to do. Has anybody run into this problem?
my connection string: <connectionStrings>
<add name="ConnectionString" connectionString="Data Source= server name ;
Initial Catalog=FILESHAREDB.MDF;
Integrated Security=false;"providerName="System.Data.SqlClient"/>
</connectionStrings>
 
Server Error in '/SendItNow' Application.


 Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user ''. The user is not associated with a trusted SQL Server connection.Source Error:



Line 41:
Line 42: 'open the connection and execute the stored procedure
Line 43: mConnection.Open()
Line 44: mResourceID = mCommand.ExecuteScalar()
Line 45: mConnection.Close()Source File: H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb    Line: 43 Stack Trace:



[SqlException (0x80131904): Login failed for user ''. The user is not associated with a trusted SQL Server connection.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
ResourceDB.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message, Int32 ID) in H:MIS DepartmentIntranetSendItNowApp_CodeDalResourceDB.vb:43
Resource.SaveResource(String filename, String fromContactEmail, String toContactEmail, String message) in H:MIS DepartmentIntranetSendItNowApp_CodeBllResource.vb:31
ContentFiles_Default.ImageButton1_Click1(Object sender, ImageClickEventArgs e) in H:MIS DepartmentIntranetSendItNowContentFilesDefault.aspx.vb:33
System.Web.UI.WebControls.ImageButton.OnClick(ImageClickEventArgs e) +86
System.Web.UI.WebControls.ImageButton.RaisePostBackEvent(String eventArgument) +115
System.Web.UI.WebControls.ImageButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1746



Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433

View 2 Replies View Related

Is There A Way To Show A User-friendly Error When User Did Not Select A Required Parameter ?

Apr 9, 2007

Hi all,



I was wondering whether there is a way to show the user an error when the user did not select a specific parameter.



In my case, I have two optional parameters. The user has to select either one to view the report. If the user does not select either one, I would like to show some sort of an error page indicating so. However, all i am getting is a complete blank with no report in sight. I as a developer know this is an error as a result of missing parameters, but i was wondering whether I could produce a page or direct it to a page so that the user doesn't go all horrified at an empty page ?



Thanks

Bernard

View 4 Replies View Related

[298] SQLServer Error: 18452, Login Failed For User ''. The User Is Not Associated With A Trusted SQL Server Connection.

Mar 11, 2008

I received the above error yesterday and haven't been able to trace it to any job or process running. We haven't implemented any changes to the server in the past few months, and it doesn't look to be a user-established connection, since the Client IP Address of the SSPI handshake error is from the server itself.

I logged this set of messages in SQL AgentServer error log:


Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)

Message
[298] SQLServer Error: 18452, Login failed for user ''. The user is not associated with a trusted SQL Server connection. [SQLSTATE 28000]

Date 10.03.2008 6:15:19 PM
Log SQL Agent (Current - 10.03.2008 6:15:00 PM)
Message
[382] Logon to server '<server>' failed (ConnAttemptCachableOp)

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 17806, Severity: 20, State: 2.

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
SSPI handshake failed with error code 0x80090304 while establishing a connection with integrated security; the connection has been closed. [CLIENT: <IP Address>]

Date 10.03.2008 6:15:19 PM
Log SQL Server (Current - 11.03.2008 2:32:00 PM)
Source Logon
Message
Error: 18452, Severity: 14, State: 1.

Any help in explaining this would be greatly appreciated.

View 8 Replies View Related

Error : Cannot Open User Default Database. Login Failed. Login Failed For User 'server/user'

Nov 22, 2007



i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.

then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:


"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"


even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.

why ?

View 3 Replies View Related

Problm Setting Up User. Error: User Is Null

Jul 20, 2005

On MS-SQL 2k I have a created user. Security for the SQL instance isset to mixed.When I attempt to connect to SQL using Enterprise client on anothermachine on the local network using Windows Auth I get the error: DBName-Login Failed for user ('null')- Reason: Not associated with atrusted SQL Server Connection.What am I over looking?TIA

View 1 Replies View Related

How Do We Determine Which User Database Tables Are Mostly Retrieved By User Or Modified By User?

May 22, 2008



Hi,
Please give the T-SQL script for this ? Thanks

Shanth


View 4 Replies View Related

How To Add New Table Under Specific User?

Jun 14, 2004

I'm new to SQL Server.

I've an online Database on a server. I've my own user name like "AKR". I want to create every table under that user. But what happens is whenever I create a table online it goes under "DBO" user name. How to avoid that?

Thanks

View 1 Replies View Related

How To Allow A Windows User Specific To A DB

Jan 2, 2008

How can i add a windows user to sql server to access specific database with read and write permissions.

Thank you very much.

View 1 Replies View Related

How To Set Parallelism For A Specific User

May 6, 2008

Hi,

actually a sever has a parallelism of 4 I would like to set the parallelism for a specific user to 2 without changing the code of the users application.

Is this possible.

As far as I understand with plan guides you just provide sql statements.
Need I to find all queries from the user, and add plan guides for all the queries, or tis there a more elegant way to do it.

br
fari

View 1 Replies View Related

Mail The DBA When A Specific User Connects

Feb 20, 2007

Hi,
I want to receive a mail when a specific user connects.
How can this be done best? Raise an alert? How?
Btw, the 'Login auditing' is set to 'Failed logins only'.
Suggestions are very welcome!
Cheers,
E

View 1 Replies View Related

Setting And Getting User-Specific Data In A Session

Oct 19, 2000

Hi:

I like to know how I may store some user-specific data at the beginning of a session and retrieve the same data later during the session in a SQL command. For those of you familiar with ORACLE, I am trying to mimic the SET_CLIENT_INFO and GET_CLIENT_INFO functions of ORACLE's DBMS_APPLICATION_INFO package on SQL Server.

Any suggestions?

thanks,
Peter

View 1 Replies View Related

Receive Mail When Specific User Connects

Feb 22, 2007

Hi,
I want to receive a mail when a specific user connects.
How can this be done best? Raise an alert? How?
Btw, the 'Login auditing' is set to 'Failed logins only'.
Suggestions are very welcome!
Cheers,
E

View 1 Replies View Related

Restrict Application User With Specific Data?

Oct 18, 2013

i am using sql server 2008R2 and i want to restrict my application user to view only the data(ships) related to him only.

We have database and many vessels with many owners, basically wants the owner could only view his owned vessels not the vessel owned by another owner.

View 2 Replies View Related

SQL Security :: How To Get Specific Permissions Per User On Each Database

Nov 24, 2015

I'm trying to get specific permissions per user on each SQL database, would you let me know if it could be achieved e.g on an object level?

View 5 Replies View Related

Please Help! How Can I Check The Current User Against A Specific Database?

Apr 29, 2008

In my application (infopath browser forms), First I get current user name thru System.Environment.UserName, after that, i want to check whether this user has access (read & write) permission to certain database, How do I do that?
One way I tried before is to get all the users and stored the names in an array for comparing in my program, but can not figure out the SQL command (to get the database users), if there it is, please kindly tell me.
Or if I can just pass the current user to check?
Thanks in advance.

View 5 Replies View Related

Login Failed For User , The User Is Not Associated With A Trusted Sql Server Connection. (microsoft SQL Server,Error:18452)

Aug 21, 2007

Login Failed for user , the user is not associated with a trusted sql server connection. (microsoft SQL Server,Error:18452)


hi ,
i am getting the above error message once in a while maybe two or 3 times a week , and then it goes away in 10 to 15 minutes or 5 minutes ,

our mode is set to mixed and we are able to connect and use both sql and windows , but once in a while , it will give us the above message when we try connecting throught sql server management studio client (using sql 05) using windows login , although it lets us connect using sql login while the windows login is denied, and after a while it lets us connect with both.

occurs randomly on some days , we run our servers on VM ware virtual machines using windows 2003 r2 enterprise 64 bit with sp2 with esx 301 virtual machine.

would appericate any feedback on this thanks

View 5 Replies View Related

Error 15185: There Is No Remote User 'sa' Mapped To Local User '(null)' From The Remote Server 'DTS_FSERVER'.

Nov 10, 2006

I am trying to add a linked server from a AMD x64 server (Windows 2003) with SQL Server 2005 64 bit to a Server running SQL 2000. These are not in the same domain.

I can create a linked server using the option "Be made using the login's current security context" but can not when trying to specify the security context, i.e. sa and the sa password. When I try I get the following message:

Msg 15185, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 98
There is no remote user 'sa' mapped to local user '(null)' from the remote server 'DTS_FSERVER'.

I have several other x64 server that I have no problem creating a linked server and specifying sa and the sa password.

The problem with using "the login's current security context" option is that I get an error when trying to run any Jobs against the linked server. The job fails withe the following error:

Executed as user: NT AUTHORITYSYSTEM. Access to the remote server is denied because no login-mapping exists. [SQLSTATE 42000] (Error 7416). The step failed.

I'm sure the two errors are related. Any ideas what is going on?

View 7 Replies View Related

How To Grant Permission To A Specific User To Run SQL Scheduled Jobs?

Feb 7, 2003

Hello Everyone,

I have an web application where the users has to run SQL scheduled jobs from the webpage. How to assign permission to a specific user to run specific jobs without making them a member of a Sysadmin role?

Any ideas you all smart people?
Thanks in advance!

Jannat.

View 3 Replies View Related

Login Failed For User '' ..... Sql Server, Error: 18452 (The User Is Not Associated With A Trusted SQL Server Connection)

Nov 7, 2007

Hi

Last week I was receiving an error when trying to connect to two of our seven sql servers from my laptop via my domain admin account. The only fix was to have my laptop rebuilt and everything re-installed.

Today however another administrator is starting to have the same problem but to only one of the seven servers!
When that administrator uses my laptop with her domain admin account it works!?

What could possibly be going wrong with our laptops? We have not installed or changed anything.

The full error message we see:

Login failed for user ''. The user is not associated with a trusted SQL Server connection. (Microsoft Sql Server, Error: 18452)

The error being logged on the server: (two errors are logged each time)


SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 53.35.165.148]


Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 53.35.165.148]

View 16 Replies View Related

Entreprise Manager Error Message: [Microsoft][ODBC SQL ServerDriver][SQL Server]Login Failed For User '#####'. The User Is Not Associatedwith A Trusted SQL Server Connection.(28000,18452)

Dec 12, 2007

Can anyone give a quick description of the meaning of this message andwhat needs to be done to get a connection.I'm running DBArtisan with SQLServer 2000 client SP4 installed.I also get the same message with MS Enterprise Manager so this iscoming out of the actual ODBC connection attempt.Thanks in advance!

View 1 Replies View Related

SQL Server 2014 :: Can Lock A Table Only For A Specific User For Some Seconds

Apr 8, 2015

I need to do some operations on a table when any user dont work with it.How do i do it?

Do i lock the table? and is it possible?(I dont want to deny permission from a user because cause error)

Can i do it with a open transaction ?

View 4 Replies View Related

SQL Server 2014 :: How To Give Permissions To Specific Schema Only For A User

May 20, 2015

I created a new login and then created a new user [COM] in DB with default schema pointing to [COM]

I created then schema [COM] WITH AUTHORIZATION [COM]

I want this [COM] user to have all permissions it needs on [COM] schema only. How do I do that? When I try to create table [Com].Table it gives me permission denied.

What am I missing?

View 9 Replies View Related

SQL Server Admin 2014 :: Can Lock Table Only For Specific User For Some Seconds

Apr 8, 2015

I need to do some operations on a table when any user dont work with it.How do i do it?Do i lock the table? and is it possible?

View 8 Replies View Related

Can&#39;t Delete A User!!

Sep 4, 2001

I am trying to recreate a user, using an NT account that changed.

First I got rid of the user using sp_dropuser, and this seemed to work. The user has certainly gone from the sysuser table. However when I try and create a new user it throws an error, telling me that the user already exists.

Any ideas?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved