Hello,
I'm trying to set textbox values when a report is rendered. Ideally I want to load all the required data for all my textboxes on my report in one dataset and have each of my textboxes query or lookup if you want that dataset to get the value I want.
Seems simple enough but I can't get it to work using Custom Report Code or any other ways. Can somebody give me any pointer regarding how I can achieve this?
Many thanks.
I want to add up the values in a couple of text boxes in another textbox. How do I refer to the textboxes?
fields!textbox1.value doesn't work..what does?
Hello all,
I am trying to think my way through a solution which I believe others have probably come across... I am trying to implement a matching routine wherein I need to match an address against a high value and a low value (or, for that matter an input date vs. a start and end date) to return the desired row ... i.e. if I were to use a straight vb program I would just use the following lookup:
"SELECT DISTINCT fire_id, police_ID, fire_opt_in_out, police_opt_in_out FROM ipt_tbl " & _
" WHERE zip_code = @zip_code AND addr_prim_lo <= @street_number AND addr_prim_hi >= @street_number " & _
" AND addr_prim_oe = @addr_prim_oe AND street_pre = @street_pre AND street_name = @street_name " & _
" AND street_suff = @street_suff AND street_post = @street_post " & _
" AND (expiry_date = '' OR expiry_date = '00000000' OR expiry_date > @expiry_date)" & _
" GROUP BY fire_ID, police_ID, fire_opt_in_out, police_opt_in_out"
My question, then, is how would you perform this type of query using a lookup / merge join or script? I have not found a way to implement a way to set the input columns? I can set the straight matches without a problem, i.e. lookup zip code = input zip code, but can't think of the correct way to set comparisons, i.e. lookup value 1 <= input value AND lookup value 2 >= input value
Any suggestions?
thanks for your time...
hi,
it is my first post on this forum, please be patient if i miss any important bit of information.
i am transporting data from a legacy system into mssql 2k5 using SSIS.
among those column of a dataset there are 13 columns, all necessary for operational reasons, that i need to ensure data consistance.
i believe i could do this check using the lookup data flow item, but surely there must be a way to do it in a more streamlined fashion.
since column names contain numbers to distinguish the version, eg; col01, col02, col03 .. col13.
i thought i could include the lookup within a loop and use a couple of variables to do this trick, but since i have not done it before i am asking for some sort of guidance from a guru among you folks.
please let me know if further clarification is necessary.
regards,
nicolas
Is there a way in rs to have a textbox more than the first value when it is dragged on the rs form when creating a report? currently when I drag a text box on the rs form, it only shows the first record on a page/form. There are twenty records on the table where the first value came from. How can I make so that twenty text boxes representing twenty records appear on twenty different pages. In other words, I am trying to build a report with a non - tabular structure that can repeat on different pages.
View 4 Replies View RelatedIs there a way to reference a value from a textbox in a matrix? In other words I want to pull the value in the textbox that is the column header into a cell in the matrix under certain conditions.
View 3 Replies View RelatedHi,
1. I have one combobox for supplierID, it displays 1,2,3...
Now i want to display the corresponing SupplierDescription in the textbox placed in the Page Header Section. If it is multiple selection then it has to be seperated by ',' (Comma).
Ex: IF i select 1,2,3 in the combobox then in the TextBox should look like
Suplliers: Ram, Don, Krish
Can you please help me in this
Thanks
Dinesh
the error message I get is
{"Object reference not set to an instance of an object."}
and it points to < Tickr As String = CType(FindControl("TickerTextbx"), TextBox).Text >
this is my code":
Protected Sub TickMastBtn_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles TickMastBtn.Click
REM Collect variablesDim Tickr As String = CType(FindControl("TickerTextbx"), TextBox).Text
Dim Comp As String = CType(FindControl("CoTextbx"), TextBox).TextDim Exch As String = CType(FindControl("ExchTextbx"), TextBox).Text
REM Create connection and command objectsDim cn As New SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataVTRADE.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True")Dim cmd As New SqlCommand
cmd.Connection = cn
REM Build our parameterized insert statementDim sql As New StringBuilder
sql.Append("INSERT INTO TickerMaster ")sql.Append("(Ticker,Company,Exchange,) ")sql.Append("VALUES (@Tickr,@Comp,@Exch,)")
cmd.CommandText = sql.ToString
REM Add parameter values to command
REM Parameters used to protect DB from SQL injection attacksWith cmd.Parameters
.Add("Tickr", SqlDbType.Int).Value = Tickr.Add("Comp", SqlDbType.VarChar).Value = Comp
.Add("Exch", SqlDbType.VarChar).Value = Exch
End With
REM Now execute the statement
cn.Open()
cmd.ExecuteNonQuery()
cn.Close()
End Sub
I want to have a FromDateTextBox and a ToDateTextBox where the user can enter in dates (most likely in mm/dd/yy format, although intelligently handing other formats might be a plus). Then I want to use these dates as the basis for a WHERE clause like:<some sql...> WHERE start_date BETWEEN 'FromDateTextBox.Text' AND 'ToDateTextBox.Text' (Note this WHERE clause will be used as the basis for an SqlDataSource FilterExpression). 1. I believe the date strings need to be in the format 'yyyy-mm-dd' to search SQL server is this correct?2. What's a decent way to convert the strings from the textboxes to the required format?3. How can I avoid an SQL injection attack?
View 4 Replies View RelatedHi All,
I developed a report with some values in textboxes. I want the output not to wrap around to the next line but to be truncated if it is more that the size of the textbox. Is there any setting that i can do b/c values are going to the second line when their size is more like printing name and last name will cause last name to go to the second line ?
Thank you in advance.
Hi, it is few days I posted here my question, but received no answer. Maybe the problem is just my problem, maybe I put my question some strange way. OK, I try to put it again, more simply. I have few textboxes, their values I need to transport to database. I set SqlDataSource, parameters... and used SqlDataSource.Insert() method. I got NULL values in the database's record. So I tried find problem by using Microsoft's sample code from address http://msdn2.microsoft.com/en-us/library/system.web.ui.webcontrols.sqldatasource.insert.aspx. After some changes I tried that code and everything went well, data were put into database. Next step was to separate code beside and structure of page to two separate files followed by new test. Good again, data were delivered to database. Next step: to use MasterPage, very simple, just with one ContentPlaceHolder. After this step the program stoped to deliver data to database and delivers only NULLs to new record. It is exactly the same problem which I have found in my application. The functionless code is here:http://forums.asp.net/thread/1437716.aspx I cannot find any answer this problem on forums worldwide. I cannot believe it is only my problem. I compared html code of two generated pages - with maserPage and without. There are differentions in code in ids' of input fields generated by NET.Framework:Without masterpage:<input name="NazevBox" type="text" id="NazevBox" /><span id="RequiredFieldValidator1" style='color:Red;visibility:hidden;'>Please enter a company name.</span><p><input name="CodeBox" type="text" id="CodeBox" /><span id="RequiredFieldValidator2" style='color:Red;visibility:hidden;'>Please enter a phone number.</span><p><input type="submit" name="Button1" value="Insert New Shipper" onclick="javascript:WebForm_DoPostBackWithOptions(new WebForm_PostBackOptions("Button1", "", true, "", "", false, false))" id="Button1" /> With masterpage:<input name="ctl00$Obsah$NazevBox" type="text" id="ctl00_Obsah_NazevBox" /><span id="ctl00_Obsah_RequiredFieldValidator1" style='color:Red;visibility:hidden;'>Please enter a company name.</span><p><input name="ctl00$Obsah$CodeBox" type="text" id="ctl00_Obsah_CodeBox" /><span id="ctl00_Obsah_RequiredFieldValidator2" style='color:Red;visibility:hidden;'>Please enter a phone number.</span><p><input type="submit" name="ctl00$Obsah$Button1" value="Insert New Shipper" onclick="javascript:WebForm_DoPostBackWithOptions(new WebForm_PostBackOptions("ctl00$Obsah$Button1", "", true, "", "", false, false))" id="ctl00_Obsah_Button1" />In second case ids' of input fields have different names, but I hope it is inner business of NET.Framework.There must be something I haven't noticed, maybe NET's bug, maybe my own. Thanks for any suggestion.
View 2 Replies View RelatedHi all,please have a look of code i am unable to perform save operation onthe asp.net web page.I ahve written a stored procedure. the same code works if all aretextboxes, but some of textbox replaced with dropdownlist box thenthis save operation doesn't occurs. please let me know where is themistake in coding .vb.net code :- Protected Sub btnSave_Click(ByVal sender As Object, ByVal e AsEventArgs) Dim employmentID As Integer =Request.QueryString("employmentID") Dim resourceID As Integer = Request.QueryString("resourceID") Dim projectID As Integer = Request.QueryString("ProjectID") Dim dbconsave As SqlConnection dbconsave = New SqlConnection(HRISDBConnectionString) Dim dbcomsave As New SqlCommand("sp_save_NewHireEmailnotify",dbconsave) dbcomsave.CommandType = CommandType.StoredProcedure dbcomsave.Parameters.Add(New SqlParameter("employmentID",SqlDbType.Int)) dbcomsave.Parameters("employmentID").Value = employmentID dbcomsave.Parameters.Add(New SqlParameter("resourceID",SqlDbType.Int)) dbcomsave.Parameters("resourceID").Value = resourceID dbcomsave.Parameters.Add(New SqlParameter("ProjectID",SqlDbType.Int)) dbcomsave.Parameters("ProjectID").Value = projectID dbconsave.Open() dbcomsave.Parameters.Add("@PreferredFirstName",SqlDbType.VarChar) dbcomsave.Parameters.Item("@PreferredFirstName").Value =txtPreferredFirstName.Text.ToString() dbcomsave.Parameters.Add("@PreferredLastName",SqlDbType.VarChar) dbcomsave.Parameters.Item("@PreferredLastName").Value =txtPreferredLastName.Text.ToString() dbcomsave.Parameters.Add("@CellPhone", SqlDbType.VarChar) dbcomsave.Parameters.Item("@CellPhone").Value =txtCellPhone.Text.ToString() dbcomsave.Parameters.Add("@HomePhone", SqlDbType.VarChar) dbcomsave.Parameters.Item("@HomePhone").Value =txtHomePhone.Text.ToString() dbcomsave.Parameters.Add("@HomeAddressLine1",SqlDbType.VarChar) dbcomsave.Parameters.Item("@HomeAddressLine1").Value =txtHomeAddressLine1.Text.ToString() dbcomsave.Parameters.Add("@HomeAddressLine2",SqlDbType.VarChar) dbcomsave.Parameters.Item("@HomeAddressLine2").Value =txtHomeAddressLine2.Text.ToString() dbcomsave.Parameters.Add("@HomeAddressState",SqlDbType.VarChar) dbcomsave.Parameters.Item("@HomeAddressState").Value =txtHomeAddressState.Text.ToString() dbcomsave.Parameters.Add("@HomeAddressCity",SqlDbType.VarChar) dbcomsave.Parameters.Item("@HomeAddressCity").Value =txtHomeAddressCity.Text.ToString() dbcomsave.Parameters.Add("@HomeAddressZIP", SqlDbType.VarChar) dbcomsave.Parameters.Item("@HomeAddressZIP").Value =txtHomeAddressZIP.Text.ToString() dbcomsave.Parameters.Add("@HomeAddressCountry",SqlDbType.VarChar) dbcomsave.Parameters.Item("@HomeAddressCountry").Value =txtHomeAddressCountry.Text.ToString() dbcomsave.Parameters.Add("@ArrangementType",SqlDbType.VarChar) dbcomsave.Parameters.Item("@ArrangementType").Value =ddlArrangementType.SelectedItem.ToString() dbcomsave.Parameters.Add("@PracticeGroup", SqlDbType.VarChar) dbcomsave.Parameters.Item("@PracticeGroup").Value =ddlPracticeGroup.SelectedItem.ToString() dbcomsave.Parameters.AddWithValue("@EquipmentNeeds",txtEquipmentNeeds.Text.ToString()) Try dbcomsave.ExecuteNonQuery() lblMessage.Text = "Record saved successfully" Catch ex As Exception End Try dbconsave.Close() End Sub==============================================================================.aspx code :-<table> <tr> <td > <asp:LabelID="lblPreferredFirstName" runat="server" Text="Name(Preferred FirstLast) :" ForeColor="Blue"></asp:Label> </td> <td <asp:TextBoxID="txtPreferredFirstName" runat="server" Text="" BorderStyle="None"></asp:TextBox> <asp:TextBoxID="txtPreferredLastName" runat="server" Text="" BorderStyle="none" ></asp:TextBox> </td> </tr> <tr> <td > <asp:Label ID="lblCellPhone"runat="server" Text="CellPhone :" ForeColor="Blue"></asp:Label> </td> <td > <asp:TextBox ID="txtCellPhone"runat="server" Text="" ></asp:TextBox> </td> </tr> <tr> <td > <asp:Label ID="lblHomePhone"runat="server" Text="HomePhone :" ForeColor="Blue"></asp:Label> </td> <td > <asp:TextBox ID="txtHomePhone"runat="server" Text="" ></asp:TextBox> </td> </tr> <tr> <td > <asp:LabelID="lblHomeAddressLine1" runat="server" Text="HomeAddressLine1 :"ForeColor="Blue"></asp:Label> </td> <td > <asp:TextBoxID="txtHomeAddressLine1" runat="server" Text="" ></asp:TextBox> </td> </tr> <tr> <td > <asp:LabelID="lblHomeAddressLine2" runat="server" Text="HomeAddressLine2 :"ForeColor="Blue"></asp:Label> </td> <td > <asp:TextBoxID="txtHomeAddressLine2" runat="server" Text="" ></asp:TextBox> </td> </tr> <tr> <td > <asp:LabelID="lblHomeAddressState" runat="server" Text="HomeAddressState :"ForeColor="Blue"></asp:Label> </td> <td > <asp:TextBoxID="txtHomeAddressState" runat="server" Text="" ></asp:TextBox> </td> </tr> <tr> <td > <asp:LabelID="lblHomeAddressCity" runat="server" Text="HomeAddressCity :"ForeColor="Blue"></asp:Label> </td> <td > <asp:TextBoxID="txtHomeAddressCity" runat="server" Text="" ></asp:TextBox> </td> </tr> <tr> <td > <asp:LabelID="lblHomeAddressZIP" runat="server" Text="HomeAddressZIP :"ForeColor="Blue"></asp:Label> </td> <td > <asp:TextBoxID="txtHomeAddressZIP" runat="server" Text="" ></asp:TextBox> </td> </tr> <tr> <td > <asp:LabelID="lblHomeAddressCountry" runat="server" Text="HomeAddressCountry :"ForeColor="Blue"></asp:Label> </td> <td > <asp:TextBoxID="txtHomeAddressCountry" runat="server" Text="" ></asp:TextBox> </td> </tr> <tr> <td > <asp:Label ID="lblArrangement"runat="server" Text="Arrangement :" ForeColor="Blue"></asp:Label> </td> <td > <asp:DropDownListID="ddlArrangementType" runat="server" Width="160px"DataSourceID="ObjectDataSourceArrangementType"DataTextField="ArrangementType" DataValueField="ArrangementType"OnDataBound="ddlArrangementType_DataBound"> </asp:DropDownList> <%--<asp:TextBoxID="txtArrangement" runat="server" Text="" ></asp:TextBox>--%> </td> </tr> <tr> <td > <asp:LabelID="lblPracticeGroup" runat="server" Text="Practice Group :"ForeColor="Blue"></asp:Label> </td> <td > <asp:DropDownListID="ddlPracticeGroup" runat="server" Width="160px"DataSourceID="ObjectDataSourcePracticeGroup"DataTextField="PracticeGroup" DataValueField="PracticeGroup"OnDataBound="ddlPracticeGroup_DataBound"> </asp:DropDownList> <%--<asp:TextBoxID="txtPracticeGroup" runat="server" Text="" ></asp:TextBox> --%> </td> </tr></table>please help me to solve the issue.Thanks in advance
View 3 Replies View Related
I have a field called "Owners", and it's a child to an "Activities" table.
An Activity can have on or more owners, and what I'd like to do is some how comma separate the values that come back if there are more than one owners.
I've tried a subreport, but because the row is colored and if another field, title, expands to a second row (b/c of the length) and the subreport has just one name, then the sub-report has some different color underneath due to it being smaller in height.
I'm kinda stuck on how to do this.
Thanks!
Folks,My secnario involves two tables - ObservationRegister, and Person.ObservationRegister contains most of the "useful" fields, includingthe UserID of the person that raised the record, and the UserID of theperson to whom the record was assigned for action. I need to write aquery to return all values in the ObservationRegister record, butinstead of returning the UserIDs, I need to look up the actual name,by looking up the name and userID in the Person table... doing thatonce (for just one of the UserID fields) is easy - a quick inner joindoes the job - but I effectively need to join to the Person table"twice", for different keys....Help? Please!? :)Steve
View 4 Replies View RelatedI need some help with the following...
My data source has some columns I have to 'translate' first and then insert into my destination table.
Example Source data:
key size height
1 'Small' 'Tall'
2 'Big' 'Short'
has to become
1 'Y' 'P'
2 'N' 'D'
I thought of creating a lookup table (I'm talking about the real table, not a lookup transformation table) that would have these columns: column name, value_source, value_dest
Example:
col_name vl_source vl_dest
size 'Small' 'Y'
size 'Big' 'N'
height 'Tall' 'P'
... and so on, I believe you get the point
How would you extract the needed values? Can I use a select statement in a derived column expression? Any ideas? I'm not really fond of the idea to create n lookups, one for each column I have to translate, is there a slicker solution?
I have a table called Orders with three fields, OrderID, Action,Status.Action and Status are code values with FK lookup to dbo.Action anddbo.Status respectively.Is it possible for me to return not just the code values but the filednames?For example:SELECT OrderID,Action,Status FROM Orders:Returns 1001,B,FHowever I would like dboAction.ActionName and dbo.Status.StatusName to bereturned instead.I.e Returns 1001,BUY,Filled.Is this possible?Thank you.
View 2 Replies View RelatedHi,
Can you please tell me the way to configure the LOOK UP transformation so that it will ignore all the null values ? I want to configure a Look up component for the column "Col1" as follows
All the NULL values of Col1 should not be considered for look-up process. They should be passed to the downstream component as valid rows.
All NOT NULL values of Col1 should be processed by the Look up component.
If there is no matching value present for any NOT NULL value of Col1 then it should be directed to error output.
Regards,
Gopi
Hi,
I have a data flow task and trying to transform datas OLTP to STG db and i have lookup tables.
I do lookuping like this
first a lookup that lookup my table with connected input column parameter
second a derived column is connected to lookup's error output for when lookup can't find the value and this derived column returned "0" or "-1" this means that lookuped value can't find and insert this value to my table
third a union that union lookup and derived column
i want to ask this is there any different solution for doing this, because if i more than 5 or 6 lookup in my ssis package i add all of them derived columns and unions and when i change something i have to change or correct the unions step by step.
thanks
I have 2 datasets, dataseta is a list of tickets and their relevant owner and databsetb is a list of owners and a days worked first against them.I have a table with a detail grouping on ticketid and a normal grouping on owner which works well... all straight forward to this point. In this table on the owner grouping level I also have a lookup to datasetb which pulls back the days worked per owner which works fine as well. But what I now need to do is total the days worked over all owners, which sounds simple but doesn't work. This is the expression on the days worked for each owner -
=lookup (Fields!owner. Value, Fields!owner.Value, Fields!Days_worked.Value,"datasetb")
If I add a sum around this then it uses the figure above but multiplies it by the amount of tickets in the detail grouping.
We did some "at scale" fuzzy lookup tests today and were rather disappointed with the performance. I'm wanting to know your experience so I can set my performance expectations appropriately.
We were doing a fuzzy lookup against a lookup table with 25 million rows. Each row has 11 columns used in the fuzzy lookup, each between 10-100 chars. We set CopyReferenceTable=0 and MatchIndexOptions=GenerateAndPersistNewIndex and WarmCaches=true. It took about 60 minutes to build that index table, during which, dtexec got up to 4.5GB memory usage. (Is there a way to tell what % of the index table got cached in memory? Memory kept rising as each "Finished building X% of fuzzy index" progress event scrolled by all the way up to 100% progress when it peaked at 4.5GB.) The MaxMemoryUsage setting we left blank so it would use as much as possible on this 64-bit box with 16GB of memory (but only about 4GB was available for SSIS).
After it got done building the index table, it started flowing data through the pipeline. We saw the first buffer of ~9,000 rows get passed from the source to the fuzzy lookup transform. Six hours later it had not finished doing the fuzzy lookup on that first buffer!!! Running profiler showed us it was firing off lots of singelton SQL queries doing lookups as expected. So it was making progress, just very, very slowly.
We had set MinSimilarity=0.45 and Exhaustive=False. Those seemed to be reasonable settings for smaller datasets.
Does that performance seem inline with expectations? Any thoughts to improve performance?
I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Any ideas on what else could be causing this?
Say I want to lookup a value in another dataset, but there is a grouping that requires you to know what the values for each level is in order to get to the correct detail record. Can you still use the lookup function with more than one field to compare against? So for example
Department
\___SalesPerson
\___Measure
I want to be able to add a new row at the Measure level, but lookup each field from another dataset. In order to do that I will need the Department AND SalesPerson values to do the lookup, but I dont think the Lookup function will let us do that will.
Hi All,
Actually this is in regard to SCD Type 2 Dimension, Scenario is like that I am moving Fact table from some old source and I have dimensionA description value in fact which I want to replace with appropriate id from Dimension Table and that Dimension table is SCD Type 2 based on StartDate and EndDate and Fact Table doesn't contains direct date value rather there is timeId in Fact so to update the value in Fact table I have to Join Time Dimension table and other Dimension Table to replace fact Description with proper Id.
Lets assume DimensionA Structure
id
Description
StartDate
EndDate
Fact Table
id
measure1
measure2
TimeId
Description
Time Dimension
TimeId
Date
Day
Hour ...
I am doing a lookup that requires mapping 2 columns in the column mapping section. When I do this, I get the error "Row yielded no match during lookup" . The SQL that I captured in SQL profiler does find the record when I run it in Management Studio. I have already tried trimming everything to no avail.
Why is this happening?
I tried enabling memory restrictions but then I my package hangs and I get a SQLDUMPER_ERRORLOG.log file with the following logged:
07/24/07 13:35:48, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 5952
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0033.mdmp
07/24/07 13:35:49, ACTION, DtsDebugHost.exe, Watson Invoke: No
Why am I getting this error with "Enable Memory Restriction"?
Hi!
I dont know if i will explain this correctly, but my problem is with reporting service.
I'm supposed to Sum value in one textbox and than that sum use it in sum in other textbox.
Something like this:
Sum(Fields!Abc.Value/(Fields!dfg.Value+Sum(Fields!abc.Value)),"matrix1_RowGroup1")*100
I get error msg 'The Value expression for the textbox 'textbox49' contains an aggregate function (or RunningValue or RowNumber functions) in the argument to another aggregate function (or RunningValue). Aggregate functions cannot be nested inside other aggregate functions.'
Something like this wont work either Sum(Fields!abc.Value/ReportItems("textbox56").Value)*100
Error The Value expression for the textbox 'textbox55' uses an aggregate function on a report item. Aggregate functions can be used only on report items contained in page headers and footers.
So, pls help if you know how to reference textbox in other in body of report.
Thx.
Hi all,
I don't understand what's happening here.
I have a Conditional Split with 3 outputs. On the first output I have a lookup, when I execute the package I have 56 rows going through the Conditional Split, all rows are then going to the 2nd and 3rd output but the lookup on the first output generates an error "Row yielded no match during lookup".
I don't understand why the lookup is generating an error while there is no row going through it.
Any idea ?
Sébastien.
I am designing a ssis package,This is intends to mine text data(Data extracted from websites).
Term lookup/Term extraction has been used as tools for mining.
I have lookup terms defined with me for reference table,but the main problem lie in extracting the nearby text/number/charcters to these lookup terms during mining.
For example :
I found noun "Email" 200 (frequency score) times in my text,Now I want to extract nearby email address(this is also true for PhoneNumber,Address attributes also).so how can I achieve this with SSIS.
If u have some idea/suggestion to carry out this challenge with or without Term Extraction/Term Lookup,plz do write here.
I have several textbox on my report and I would like to remove line if blank.
texbox1
textbox2 <--- use Expression in order to display it.
textbox3
------------------------------------------------------------------------------
Current Display :
sergio myers
<-------- insert a blank line
donna summer
_____________________________________________
The Desire Result that I would like to have :
sergio myers
donna summer
_____________________________________________
I would like to remove the middle line if blank so it can be display like this :
sergio myers
donna summer
Does anybody knows how to accomplish this in Reporting Services.
Foxpro uses "Remove line if blank" and 'Print only when expression is true'
Thanks,
Sergio
Hey
I got a SQL DB with three tables, where two of the collums of the main table gets its data from two other tables, ok? Now, on one page, called "search" the user should be able to search in the DB, and on another page the user should be able to register some keywords, my question is how can the user register several keywords in the same textbox, using perhaps a ; as a separator between the words? I hope you understand what I mean..
Thx!
Hello
How do u update the datafield of a row using buttonClick in vb? I have a details view whereby it will display the username and timeleft once log in. currently the datafield, timeleft on one user in the database is null. I'm using sqldatasource.
Once log in, it will direct to this page where the user enters a code on the textbox and click the enter button. This will cause an update on the user's timeleft. But the code must not be entered to the database.
For eg. If code = 1111 then 'update timeleft = 60 The timeleft is in minutes. 60 will be stored as double in the user's row in the database. How do i do this?
Please help asap. Thanks! :)
I use txtbox.Text = cmd.ExecuteReader() but it doesn't work. How can I fix it ?
View 4 Replies View RelatedHelloI have a problem when I want to update my textbox, I have a textbox called Textbox1, when I Insert data from it to database it is working well, even when I Update it WITHOUT SELECT field from database it is working well again,but when I Select [pagename] from database then want to Update it it is not working, nothing happend and in debuging the textbox doesnt have any value. what shoud i do? the value become null? Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Label1.Text = Request("Id").ToString() Dim conname As String = ConfigurationManager.ConnectionStrings("IPbrandConnectionString").ConnectionString() Dim con As New SqlConnection(conname) Dim sql As String = "SELECT [Id], [pagename] FROM [content] WHERE ([Id] = @Id)" Dim cmd As New SqlCommand(sql, con) cmd.Parameters.Add(New SqlParameter("@Id", SqlDbType.Int, 32)) cmd.Parameters("@Id").Value = Label1.Text.ToString() con.Open() Dim reader As SqlDataReader = cmd.ExecuteReader() Do While reader.Read() TextBox1.Text = reader("pagename") Loop reader.Close() con.Close() End Sub Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim conname1 As String = ConfigurationManager.ConnectionStrings("IPbrandConnectionString").ConnectionString() Dim con1 As New SqlConnection(conname1) Dim sql1 As String = "UPDATE [content] SET [pagename] = @pagename WHERE [Id] = @Id " Dim cmd1 As New SqlCommand(sql1, con1) cmd1.Parameters.Add(New SqlParameter("@Id", SqlDbType.Int, 32)) cmd1.Parameters("@Id").Value = Label1.Text.ToString() cmd1.Parameters.Add(New SqlParameter("@pagename", SqlDbType.VarChar, 50)) cmd1.Parameters("@pagename").Value = TextBox1.Text.ToString() cmd1.UpdatedRowSource = UpdateRowSource.OutputParameters Try con1.Open() cmd1.ExecuteNonQuery() Catch err As SqlException Throw New ApplicationException("Data error.") Finally con1.Close() End Try Server.Transfer("main.aspx")
View 2 Replies View RelatedI am working with a Detailsview. I am displaying information from a number of different tables, and so when I configure the datasource I have to specify a custom sql statement. I can get it to display the right columns, but I cannot seem to be able to use a where statement.
I am wanting to display the info in the Detailsview based on what is entered into a textbox, but I get an error when I try to add in the where statement. Can someone tell me what I am missing here?
Thanks