when I was sending 50 simultaneous connections to the web services, I got these 2 errors: - "1[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. "
- "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)"
Everything worked fine if I ran 10 simultaneous connections. I am using Microsoft ACT to load test the web service. The database is SQL Server 2000. Any idea about why this is happening?
I am receiving the following error when starting a program called ShelbySystems that is supposed to connect to a local database. I don't think this is a security issue but I don't know much about SQL server either so...
  DIAG [08001] [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. (17)   DIAG [01000] [Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). (2)
System Info: Windows 10Â Home -Â upgrade from 8 64 bit SQL server 2012 Express SQL Backwards compatibility 2005 64 bit ShelbySystems software v5.4
I am including the trace log in case it is useful.
I am running Windows 2003 Standard edition with IIS and SQL 2000 SP3a installed on it.
The web clients use ASP pages which use DSN to connect to SQL 2000 database. It has been working fine since last 1.5 years except 2 days ago when I faced this error suddenly on server:
I checked the error logs of SQL server and didn't find anything. Only entries were that the SQL is starting database, ports and IPs on which it is listening etc. The usual stuff. No errors in starting.
The SQL Agent log showed following errors:
2004-11-30 04:45:33 - ! [298] SQLServer Error: 2, ConnectionOpen (Connect()). [SQLSTATE 01000] 2004-11-30 04:45:33 - ! [382] Logon to server '(local)' failed (JobManager) 2004-11-30 04:45:36 - ! [298] SQLServer Error: 17, SQL Server does not exist or access denied. [SQLSTATE
I don't understand what was the problem. It first occured when nothing on server was changed, next it occured 30-32 hours later, and still now it hasn't happened again.
Hi guys! I am using SQL 2005 and I wonder why I am encountering the error "[Microsoft][ODBC SQL Server Driver]Syntax error or access violation" everytime I am trying to create stored procedure with temp table and table variable. See my code below with temp table.
Any thoughts will be appreciated!
CREATE PROCEDURE DBO.SAMPLESP (@DETAILS AS VARCHAR(8000), @ID AS VARCHAR(15))
AS
BEGIN TRANSACTION
CREATE TABLE DBO.#TEMPTABLE { ASSET VARCHAR(50) }
DECLARE @INSTINSERT AS NVARCHAR(4000) SET @INSTINSERT= 'INSERT INTO #TEMPTABLE(ASSET)' SET @INSTINSERT= @INSTINSERT+ @DETAILS
EXEC sp_ExecuteSQL @INSTINSERT
INSERT INTO InstDetail (TrackNum, ASSETID) SELECT @ID, A.ASSE FROM #TEMPTABLE A
DROP TABLE #TEMPTABLE
IF @@ERROR != 0 BEGIN ROLLBACK TRANSACTION RAISERROR('There was an error in here', 11, 1) RETURN END ELSE COMMIT TRANSACTION
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application. --------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I am getteing need help Query analyzer error Unable to connect server local Msg17, level 16,state 1 ODBC SQL server driver [DBNETLIB]SQL server does not exist
odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect
we got the error with access 2000 database and PHP as prog. language .
we created dsn for the connection.
reboot solves the problem. but we need another solution better than this.
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
I installed the SQL SERVER , Oracle client on my computer, and I can connect to remote SQL server,oracle databases using wizards , however when I try to run application iam getting this error. Server Error in '/shiva/datagrd' Application.
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.Source Error:
hello, I hope someone can help me with the problem I am having, I get the following error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I am trying to connect to my SQL Server 2000 db via asp.net. The aspx file uses a DataGrid, the aspx.vb code behind file gets the connection string from the web.config file. I tested my connection via ODBC, or SQL Query Analyzer just fine so I know the userid/password is correct.
this is the snipplet code from the aspx.vb code-behind file:
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) _ Handles MyBase.Load Dim dbConn As OleDbConnection Dim dCmd As OleDbCommand Dim dReader As OleDbDataReader Dim strConnection As String Dim strSQL As String
If (Not Page.IsPostBack) Then Try
'get the connection string from web.config and open a connection
Hi have created an application in asp.net to connect to a sql database. The reason why I am sooooo very confused is because the connection to the database works if i keep the project on my local machine and connect to the database on the server, but as soon as I upload the project to the server, I get the following error when I try to connect to the database: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access deniedCan anyone tell me why this is happenning? - PLEASE - Any help will be appreciatedThanks, Danielle
ok im a CS student, installed visual studio .net, and im trying to connect to a ms sql database (Northwind), but I keep getting a error that "[DBNETLIB][ConnectionOpen(Connect()).] SQL Server does not exist or access denied" in visual studio whenever I try creating a new database connection. How do I know if SQL server is installed on my system? cuz in my systray I see SQL server service manager, is that the same thing as SQL server? or do I need to download the full version or something? also could it be that a certain port on my system is not open that SQL server requires to be open? Thanks Ron
and i am having a problem which was encountered by youin the past. My actual proble is " I am having vs.net 2005 along with MS SQL Server 2000 (Server1) in my system. The MS SQL Server is database server for some of my collegues. Whenever i want to connect to my Server1 DBServer it is givng the following error message."
"[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied"
and the other guys are able to connect to the same DBServer. and one thing i am able to connect to other DBServers which are in Lan..
Lets get this out of the way first - I KNOW NOTHING ABOUT SQL SERVER, MSDE or MDAC
Sorry I don't mean to shout but I really don't know anything at all so please make your answers as simple as possible.
I have an application (Webmarshall) that has a SQL database from which certain reports are run. Whenever I try to run the reports it asks me for database details.
According to the application it is using LANCELOTWEBMARSHALLWebmarshall as the database
As this is all happening on one server, I presume it is local and not remote.
When I am presented with the dialogue box for the reporting module it asks for a server and a database, I have tried the following :
Dear all,On Win2000 server with SP3, I am trying to access a SQL Server 7.0database, "TestDB", from VB6 via a SQL Server ODBC system DSN using ADO2.7. In SQL Server Enterprise Manager, there is a login named "Tester".In its property window, NO "Server Roles" was assigned but its"Database Access" was set to "TestDB". This login was also made as theuser of "TestDB" with "public", "db_datareader" and "db_datawriter"selected as its "Database role membership". All the tables I am tryingto access in "TestDB" were created under "Tester".My code is like:Set conn = New ADODB.Connectionconn.Open "DSN=TestDSN;UID=Tester;PWD=test"Set cmd = New ADODB.Commandcmd.ActiveConnection = conncmd.CommandText = SQLset rs = cmd.Execute()If I set the SQL to something like "SELECT * FROM tbl_test", I alwaysget an error of "-2147217865" saying "[Microsoft][ODBC SQL ServerDriver][SQL Server] Invalid object name tbl_test". If I set the SQL to"SELECT * FROM Tester.tbl_test", everything runs properly. Could anyoneplease kindly advise why the first SQL is not working? Or in otherwords, why must I prefix the table name with its owner while the DBconnection is already made under that owner name? Thanks in advance.Tracy
recently, I use the following script(somebody else) to create a database on a remote server: the script is as follow: /*************************/ CREATE DATABASE [ErrorLog] GO
if not exists (select * from master.dbo.syslogins where loginname = N'ErrorLog') BEGIN declare @logindb nvarchar(132), @loginlang nvarchar(132) select @logindb = N'Navigator', @loginlang = N'us_english' if @logindb is null or not exists (select * from master.dbo.sysdatabases where name = @logindb) select @logindb = N'master' if @loginlang is null or (not exists (select * from master.dbo.syslanguages where name = @loginlang) and @loginlang <> N'us_english') select @loginlang = @@language exec sp_addlogin N'ErrorLog', 'secret', @logindb, @loginlang END GO
if not exists (select * from dbo.sysusers where name = N'ErrorLog' and uid < 16382) EXEC sp_grantdbaccess N'ErrorLog', N'ErrorLog' GO
Grant select, insert On Errors to ErrorLog /***************************/ in my *.asp program, I used the following string to connect to the database on the remote server. /******** con.open "dsn=ErrorLog;uid=ErrorLog;pwd=secret;" ********/ the following message comes up: /********/ Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E4D) [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'ErrorLog'. /*********/ what is the problem here? when I set up dsn ErrorLOG, I used "abc" userID and password "XXX" which is our server database administrator assigned to me. I tested connection in odbc, it is OK I just don't get, ther user ErrorLog already had login id and granted access to database errorlog. any clue, please help! Betty
I am getting the below error when I try to access the table in 2005 database through 3rd party application from the application server.
“[Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt�
This database was restored from sqlserver 2000, so the ODBC connection in the application server first was pointing to 2000 database and now its dropped and recreated to point to the 2005 database.
I dont get this error message when I do the same action from my pc.
I google'd on this error message, and I am not sure if the driver has to be upgraded or if there is anything else that I am missing here.
I installed SQL 2005 including backward compatibility, MSDN libraries and SP2 a new Windows 2003 server (chose mixed mode authentication). Installation was successful and I then installed an off the shelf database with Windows authentication which also installed successfully. I created a new group in AD, added the database users into the group and gave db-owner rights to the group in SQL as advised by the installation guide. However, when I try to open the database it gives an error message saying "Cannot open database.[DBNETLIB][ConnectionOpen(Connect()).] SQL server does not exist or access denied". I also tested it adding an individual user (myself) as a user to no avail. When I set up DSN in ODBC on my computer I can successfully test the connection but can't run the application. The connection is via TCP/IP. Any suggestions?
I am using PowerDesigner to reverse engineer a SQL 2000 database. I am getting the following error. I can't find out what this error means. Does anyone know?
Unable to list the users. [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. SQLSTATE =37000
I am running a query which pulls back about 200,000 records.
When I run this in ISQL (SQL Server 6.5), it runs in almost 2 minutes. When I put it in a store procedure and run it off my ASP application, I get this error
[Microsoft][ODBC SQL Server Driver]Timeout Expired
We've tried many things including: 1) Increased connection and command time outs in Global ASA 2) Have the ODBC driver log long Quires to a file 3) Changed Query Time out in Enterprise Manager(360 seconds) Go to tools --> Preferences/configure -->Connection Tab 4) Changed Maximum allowed open database from 20 to 200 5) Changed resource timeout to 360 seconds from 5 seconds 6) Changed remote query timeout to 0, allowing infinite wait.
I inherited some really twisted asp pages from another developer that crank for a long time. They used to work, albeit slowly. Now when I try to run one I get the error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e31'
[Microsoft][ODBC SQL Server Driver]Timeout expired
Short queries run fine.
IIS4 & SQL Server are on the same box. I didn't the ASP pages or the IIS or SQL server config. I did install VStudio 6.0 a while back.
Thank you to all who reply to this perplexing question. Mike
Database VMFGSRVRVMFG is SQL 2000 Std. Database NT002P_GL is SQL 7.0. All SQL versions are at the current SP levels.
I receive the timeout message when I am in EM, database,VMFG(database), Views, Open View, Return All Rows. I can successfully run the code in QA. I believe I am running up against a time parameter in SQL Server. I have reviewed all time parameters that I can find. However, I still receive the error. What parameters should I be looking at? I am attempting to create a view with the following code: -------------- CREATE view uv_olap_adj_co_profit as select customer.id as customer_number, customer.name as customer_name, customer_order.salesrep_id as salesperson, isnull(customer.country, 'USA') as country, '7' as business_unit, customer_order.order_type as order_type, uv_olap_co_profit.customer_order, uv_olap_co_profit.work_order, uv_olap_co_profit.close_date, uv_olap_co_profit.period_year, uv_olap_co_profit.gl_period, isnull((uv_olap_co_profit.billing + ut_man_adj.billing) *ut_fin_adj.billing, uv_olap_co_profit.billing*ut_fin_adj.billing) as billing, isnull((uv_olap_co_profit.material_cost + ut_man_adj.material)*ut_fin_adj.material, uv_olap_co_profit.material_cost*ut_fin_adj.materia l) as material, isnull((uv_olap_co_profit.labor_cost + ut_man_adj.labor) *ut_fin_adj.labor, uv_olap_co_profit.labor_cost*ut_fin_adj.labor) as labor, isnull((uv_olap_co_profit.burden_cost + ut_man_adj.burden) *ut_fin_adj.burden, uv_olap_co_profit.burden_cost*ut_fin_adj.burden) as burden, uv_olap_co_profit.service_cost as service from uv_olap_co_profit, ut_man_adj, ut_fin_adj, customer_order, customer where uv_olap_co_profit.customer_order *= ut_man_adj.cust_order_id and uv_olap_co_profit.work_order *= ut_man_adj.work_order and uv_olap_co_profit.period_year = ut_fin_adj.year and uv_olap_co_profit.customer_order = customer_order.id and customer_order.customer_id = customer.id and (customer_order.salesrep_id = 'LABELAIREP' or customer_order.salesrep_id = 'OMOHUNDR' or customer_order.salesrep_id = 'EGGERSR') union all select customer.id as customer_number, customer.name as customer_name, customer_order.salesrep_id as salesperson, isnull(customer.country, 'USA') as country, customer.user_2 as business_unit, customer_order.order_type as order_type, uv_olap_co_profit.customer_order, uv_olap_co_profit.work_order, uv_olap_co_profit.close_date, uv_olap_co_profit.period_year, uv_olap_co_profit.gl_period, isnull((uv_olap_co_profit.billing + ut_man_adj.billing) *ut_fin_adj.billing, uv_olap_co_profit.billing*ut_fin_adj.billing) as billing, isnull((uv_olap_co_profit.material_cost + ut_man_adj.material)*ut_fin_adj.material, uv_olap_co_profit.material_cost*ut_fin_adj.materia l) as material, isnull((uv_olap_co_profit.labor_cost + ut_man_adj.labor) *ut_fin_adj.labor, uv_olap_co_profit.labor_cost*ut_fin_adj.labor) as labor, isnull((uv_olap_co_profit.burden_cost + ut_man_adj.burden) *ut_fin_adj.burden, uv_olap_co_profit.burden_cost*ut_fin_adj.burden) as burden, uv_olap_co_profit.service_cost as service from uv_olap_co_profit, ut_man_adj, ut_fin_adj, customer_order, where uv_olap_co_profit.customer_order *= ut_man_adj.cust_order_id and uv_olap_co_profit.work_order *= ut_man_adj.work_order and uv_olap_co_profit.period_year = ut_fin_adj.year and uv_olap_co_profit.customer_order = customer_order.id and customer_order.customer_id
I've tried every websearch possible to try and get a solution for this problem but can't.
Development Software: SQL Server 2000 Enterprise Manager 8.0 Query Analyzer 8.00.194
Error: When I run a mildly complex view in Enterprise Manager I get the error:[Microsoft][ODBC SQL Server Driver]Timeout Expired after about 30 seconds.
When I copy and paste and run the exact same code in Query Analyzer the Query runs for longer than 30 seconds and runs until completion. Now my question is since this apparently seems to be an Enterpise Manager problem and not on the server end, where do I go in Enterprise Manager to change that setting? I've looked everywhere in Enterpise manager and can't find a "command timeout" setting.
Hello, I installed MS SQL Server 2000 Evaluation Edition on Windows XP Pro. I have database on the same PC. When I am running a query(view) from Query Analyser I get "[Microsoft][ODBC SQL Server Driver] Timeout Expired" error message . When I am running the same view on smaller amount of data it works.
I have tried updating the DSN configure option i.e. 30000 milliseconds.
But I am still facing the problem of Timeout Expired.
I am using sql server 2005 for daily importing data from Excel Dump Files into sql server table. Everyday the database gets updated. The Error mentioned in Subject normally gets once a month, due to daily updation of database whether each table structure gets changed like index, trigger, etc.
