Hello,
I connect to the SQL Server with RDA method. there was no problem until I had to use a port to access the virtual path of RDA.
it connects when
rda.InternetUrl = http://ip/rdadir/sqlcesa30.dll ,
but no when
rda.InternetUrl = http://ip:81/rdadir/sqlcesa30.dll .
May someone help,please?
Thanks.
Hi,
Could anyone tell me how the data can be ported from informix to sql server ?
Is there a way to run the informix query from sql server ?
Thanks,
Vijay.
Hello. I'm a novice with SQL Server. I set up a SQL Server instance using Enterprise Manager and I want to find out what port that instance is listening to, because it's not listening to the default.
Is there a way I can specify a port for the server to listen to?
Hello. I'm a novice with SQL Server. I set up a SQL Server instance using Enterprise Manager and I want to find out what port that instance is listening to, because it's not listening to the default.
Everything is on my local machine, this is a development database.
Is there a way I can specify a port for the server to listen to?
Hello!
I have an SQL Server 2000 database at home PC that has several tables and plenty of data in it...also stored procedures.
I want to port all that data so that I can use it at another PC that has SQL Server installed in college.
How to do this?
Thanks in advance!
Lala the don
I have access to the default instance of a SQL Server ..... I have access to the QA only .. by reading the registry through the QA I get to knw that there are additional 4 more instances on the Server ..... is is possible to get the port on which they are listening using the QA ....
I knw that we can go to the servers network utility & see it there in the TCP /IP ... but i dont have access to that , neither do i have access to the error logs that tell me , on which port is SQL Server listening to
Can someone help
Hello All,
We have default instance "MSSQLSERVER" with Port number 1433. We Installed another Instance "MGMT" on the same windows server, it came as same Port number "1433".
We decided to Change the Port number for Instance "MGMT".
1. We changed the port number for "MGMT" to like "1234"
2. After the change we did telnet to "MGMT" Instance with "1433", it worked.
3. Then we changed the Port number for Instance "MSSQLSERVER" also to like "4321".
4. After change of these setting and followed with rules framed in link as said: http://www.databasejournal.com/features/mssql/article.php/3689846
5. Now we did telnet with changed port number, it works fine.
6. We can not do telnet with Port number 1433 for both Instances "MSSQLSERVER" and "MGMT".. This is fine, what we want, and what we intent to do...
Question to MVP OR SQL Gurus:
A) If you want to change port number to Second Instance, shall we need to change for Default Instance?
B) How the port numbers will be configured? please advice.
Thanks, Jay
I have a server running SQL Server 2005 Dev behind a firewall that blocks the default SQL Server port. So, I changed the port that SQL server uses to another port. How do I connect to the database instance with SQL Server Management Studio. I have tried:
xxx.xxx.xxx.xxxMSSQLSERVER
xxx.xxx.xxx.xxx:portMSSQLSERVER
name.of.machineMSSQLSERVER
On all of these, I get an error 25 - Connection string is not valid. I have the surface area configured correctly (i.e. named pipes and TCP/IP are both turned on), and the sql server browser is running. I can ping the server just fine, and when I go to GRC.com and do a shields up report it lists my port of choice as being open.
What am I missing?
I also set the native client configuration's default port to the port I want to connect to, and it appears that that didn't work either.
Ideas? I would like to get this running ASAP.
Thanks in advance!
I tried creating an alias to the server to get it to connect to analyze the server but it will not recognize the SQL 2000 server as a valid server to analyze. I can use the alias to connect in EM or SSMS. Any ideas? The server is not clustered and is at SP4. I've connected to several others in my environment but this one is causing me grief!
Thanks,
Linda
Hi there,
I want to change the default sql-server port number 1433 to a new one. Can i do that? If yes, how?
Also, i have noticed that there is no port number option in the sql server 2005 management studio login window. So, what if the server has changed its port number?
Any suggestions would be appreciated. thanks
I am unable to access the default port 1433 on my SQL 2003 server. There is no firewall. I run telnet <ip> <port> and get "Connection failed" which explains my inability to connect to the server for weeks. I have being unable to connect to the server after I uninstalled sql 2000 and reinstalled it on my 2003 server. Some of the things I have checked is Network Configuration in EM. Named Pipes and TCP/IP is installed with port set to 1433. HKLMSoftwareMicrosoftMSSQLServerClientSuperSocketNetLibTcpDefaultPort port is set to 1433. Is there anything I need to configure on the server side to have the default sql server port enabled.
Thanks
Thanks for Microsoft's Windows XP Service Pack 2 and Windows Server 2003 that make the security much stronger. However, besides the invisible benefit so far, I have become the victim of this security policy.
I have several named instances of SQL 7/2000 installed in my machine. They are not visible out of the Microsoft new fire wall. I need to access the instances from outside the fire wall, but I don't know which port I should open for the instances.
From SQL online, the default instance of SQL server is connected through TCP/IP by default port 1433. I could successful open that port and made the default instance visible to outside. However, the port 1433 doesn't work for the named instances. SQL online said, the port for named instance is dynamically (by default) chosen the first time the instance is started. So, actually, I have no way to know the port.
Is there anyway that I can check the database or somewhere to get the port that is used by the named instance?
Thanks for any input and recommendation.
Hi all,
I'm working on a school project on web and mobile applications, and had decided to use MS SQL Server for my backend database.
However, after I've installed MS SQL Server 2000, I ran a port scan and I couldn't find the server running on any ports (MySQL is running on my port 3306, but I guess it doesn't matter) Can something drop some hints on how to debug the problem?
I'm running on Athlon XP 2000+ w/ Windows XP Professional SP2
Thanks a lot!
Hi all,
I have SQL Server in NT 4.0 which has two IP addresses. How to force the SQL Server to listen to specific IP address ? We can make client to listen to specific port & IP and let me know the way to configure SQL Server to listen only to specific port that will make to ensure that SQL Server can be communicated throught that specific port.
Your answer would be highly appreciated.
regards,
Nana
I want to know how to check whether SQL Server 2000 can listen to port 1433 or not. If I run netstat -a, am I suppose to see port 1433 regardless of what service pack I have applied to SQL Server 2000?
View 14 Replies View RelatedHow does one check which port SQL Server is listening to? How does one know if it is 1433 or 1434?
View 8 Replies View RelatedI have changed SQL Server from default port to another port number. All appears fine. If SQL Server is restarted it is all fine, however, when the server is restarted SQL Server fails to start. If you then log into the server and manually start the services they start just fine. So, it appears that something blocks the port or uses the port upon server startup for a few seconds. The AV folks say that they are not blocking ports and that it AV service actually starts 15 seconds after the SQL start failure.So, the question becomes is how can I track down what is blocking or using that port?
This is Win2012/SQL2014 CU3
Server failed to listen on xxxxx::xxxxxxxxxx <ipv6> xxxxx. Error: 0x2741. To proceed, notify your system administrator.
Server failed to listen on fe80::5efe:10.255.196.25%18 <ipv6> 14001. Error: 0x2741. To proceed, notify your system administrator.
TDSSNIClient initialization failed with error 0x2741, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. The requested address is not valid in its context.
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Hi,
Is there any concerns or problems with forward a port to SQL server
from our internet firewall so that you can access the databases over the internet? Is it a standard practice to do this in order to remotely access the SQL server. Or is there a better way to do this? Also, if it is ok to do this are any things you need to do to enhance your security from vulnerabilities being open to the internet.
Any suggestions or comments would be appreciated on this subject.
Thanks
When I change the tcp/ip port to anything other than 1433 my SSIS nor DTS packages run successfully. Does the tcp/ip port have to be on 1433 for the SSIS or DTS packages to run successfully?
View 3 Replies View RelatedHi,
I have SQL Server 2000 installed on my Windows XP (SP2) machine. I have the port set to 1433 (under Server Network Utility-->General-->TCP/IP). Here's the problem: when i run
netstat -anb
nothing is running on port 1433. What i DO have is this:
TCP 0.0.0.0:1036 0.0.0.0:0 LISTENING
[sqlservr.exe]
Before I rebooted my computer it was running on port 1032. Anyone have any idea why this is happening? Thanks.
Hello,
Currently i have installed the SQL express server,how do i find out the port on which the
server is running.
regards
kaushik
Hi,
Are there any one who give a example of SMO or WMI to set SQL Server port number?
I have a SQL server database that I am trying to connect to from VS2005 in the Server Explorer.
I am not using the standard port for my SQL server listening port and I don't see where I can tell the Server Explorer to use a different port?
Can someone point me in the right direction for connecting to my database?
Thanks.
How can I configure dbdesigner to connect to a sql server that is listening on a different port number ? For those of you not familiar with debdesigner:
http://fabforce.net/dbdesigner4/index.php
I can connect to a local instance just fine but not to a sql server that is listening on a specific port (named instance)
[edited to add]
it works ! I just had to use the name instance notation
server instance_name
It wouldnt connect with iport_number syntax
hooray !
I know the ..Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGErrorLog on the server contains the information. But that needs I to RDP to the server or open the file remotely. Is there any other way to find out the port from my SSMS connection?
I remember in SQL Server 2000 you could find the information by choosing Properties of a connection in EM and click on the Network Configuration button. (I know it works when you are ON THE SERVER! But when I tried from my desktop, pressing the button didn't do anything)
Canada DBA
Is there a good way to port data from an AS400 over to SQL server 2005? If anyone has any experience with this, can you tell me where to go to get info?
View 3 Replies View Relatedcan any one guide me how to change the default port address of apache which is 80 to any other port number. coz the default port number is taken by iis also.
View 1 Replies View RelatedHi,
I'm setting up my SQL Server 2005 instances to use dynamic ports on one of my machines. What is the tcp port range used? I need to know the range so I can open the correct ports on my firewalls.
Thanks
Brian
how to change the port of SQL-Server 2012 mirroring port rather than 5022, can I use different port and how?
[URL]
I have opened up a port on a remote SQL instance and can see that the port is LISTENING when using the PortQry tool. I have also set the TCP port in the TCP/IP properties in the IPAll section for that instance, yet I am unable to connect and get an error of
Connection Timeout Expired. The timeout period elapsed while attempting to consume the pre-login handshake acknowledgement. This could be because the pre-login handshake failed or the server was unable to respond back in time. The duration spent while attempting to connect to this server was - [Pre-Login] initialization=1; handshake=14998; (.Net SqlClient Data Provider)
I have done this on other instances, although they were default instances, and it has always worked fine.
SQL Server 2012 two node single instance cluster.
For DB access from application severs, do we need to open port (1433) for NODE IPs too ?
Or is it enough if we open the port 1433 only for VIRTUAL IP ?
HiI have a question regarding the SQL Server(SQL Server 7) port 1433.Some body is trying to hack into our Windows 2000 server through port1433. Is there a way i can close this port? I tried using a toolcalled Ipsecpol.exe ( Internet Protocol Security Policies Tool). Butwhen we run netstat, it still looks like they are able to connect tothe server using port 1433. Has anyone come across this problem? Iwould appreciate it very much if somebody could send in anysuggestions regarding this.Thanks,Ann
View 6 Replies View RelatedI have TWO named SQL Server instances (on the same machine) and I need to know the port of each of them, how can I do that? Is it write to check the following:
Which one to take: "TCP Dynamic Ports" or "TCP Port"? and what is the difference between them anyways?
Can the two instances (or more) on the same machine use the same port?!