I like to display the records for AccountNo = 221 from table records shown below, how would I do this? I am display this results in a crystal report. What is sql statement to do this? Thanks.
Sql Statement: (this statement is not allowed)
Select AccountNo, RecordID, (Select Description From Table1 Where RecordID In (Select RecordID From Table2 Where Date < '04/05/2006')) As Description, Amount From Table2 Where Date < '04/05/2006'
Desired Result:
AccountNo RecordID Description Amount
221 20 Whew 290.00
221 21 Hi There Good Morning 728.00
Table 1
RecordID Description
20 Whew
21 Hi
21 There
21 Good Morning
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
I built an app, works fine. Had the development environment working fine (VS2005 (SP0) and SQL Server Express). It had been stable for months, no problem.
Then I had to reinstall XP Pro...(finally threw too many conflicting programs into it, I guess...)
I managed to get VS2005 reinstalled ok. However, when I opened and compiled my existing app in VS2005, using Cassini, I got the dreaded error:
An attempt to attach an auto-named database for file <file string> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I also get this error for the compiled copy of the app on the same machine, running on IIS. (Where it also previously worked fine).
I appreciate that there are zillions of posts on this issue. I'm hoping that someone might know why this should happen in this particular case.
The thing that's different about this case is that the app was working fine; I have the app deployed on a demo machine and also on a remote server as well as on the development machine.
The only thing that changed is that there was this fresh install of SQL Server Express.
I tried using >> sp_configure user instances enabled','1';RECONFIGURE <<< in SSMSEE, which took, but didn't help.
So something is different in SSE. Since the app is stable everywhere else, I REALLY don't want to go through and adjust the connection strings...MUCH better to figure out what SSE needs to be happy with the existing connection strings...as it was before.
Any suggestions would be appreciated.
Thanks!
EDIT----TRIED SOME THINGS:
Changed folder and file permissions to allow ASPNET full access to the .mdf's and log files (though never had to do this before on the development machine.) No change...
Can see the table contents within the .mdf through SSMSE, and also through Server Explorer in VS2005.
So because the problem happens with both IIS and Cassini, I'm assuming it's got to be an issue between ASPNET and SSE.
EDIT --- TRIED SOME MORE THINGS:
I dimly remember that when I had this problem before, it was that the error message was too "dumb". It wasn't my file that had the permissions problems, it was that the SSE System Databases had to have permissions with respect to ASPNET.
I tried to set that up but I'm a complete newb on this area, so I don't know if I did it right. In SSMSE I created a Login for MyComputer/ASPNET, and gave it all permissions and roles, and then made it an owner for the four system databases...but no joy.
Any pointers on this last piece would be helpful.
EDIT - MORE INFO
The error details
[SqlException (0x80131904): An attempt to attach an auto-named database for file <filestring>.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
Code below: [Code SQL] USE TestWarehouse IF ('dbo.TestItems') IS NOT NULL DROP TABLE [dbo].[TestItems]; GO CREATE TABLE [dbo].[TestItems] ( TestItem int not null IDENTITY (1,1)
updating the # of Payer from below query to match with the # of rows for each payer record. See the Current and desired results below. The query is currently counting the # of rows for all payers together and updating 3 as # of payers. I need it to count # of rows for each payer like shown inDesired result below. It should be showing 1 for first payer and 2 for 2nd & 3rd based on # of times each payer is repeated..
SELECT b.FILING_IND, b.PYR_CD, b. PAYER_ID, b. PAYER_NAME,a.CLAIM_ICN, (Select Count(*) From MMITCGTD.MMIT_CLAIM a, MMITCGTD.MMIT_TPL b , MMITCGTD.MMIT_ATTACHMENT_LINK c where a.CLAIM_ICN_NU = c.CLAIM_ICN and b.TPL_TS = c.TPL_TS and a.CLAIM_TYPE_CD = 'X'
Table 3: ID RoleID Time 1 1 09:14 2 1 09:15 1 2 09:16
Now I want all the records which belongs to RoleID 1 but if same ID is belongs to RoleID 2 than i don't want that ID.From above tables ID 1 belongs to RoleID 1 and 2 so i don't want ID 1.
I need to query out multuple rows of data from the following table and retrieve it as a single row. Ideally, I'd like to do some sort of subquery that supports multiple columns, but as far as I know, that only exists on Oracle, not MSSQL. Here's an example of the data:UserDefinedFieldId UserDefinedRowID FieldValue1 1 date (stored as text)2 1 text3 1 text1 2 date (stored as text)2 2 text3 2 text...27 UserDefinedFieldIds for each row in the actual table I wrote a working query, but I need something more efficient for this particular application. (The query to do this must fit in a 2000char data field--with all 27columns brought in with separate subqueries, I'm pushing 5000.) Already tried shorter table names, which only saved me about a 1000 characters. SELECT (SELECT SecondaryTable.FieldValue FROM UserDefinedData AS SecondaryTable WHERE SecondaryTable.UserDefinedRowID = PrimaryTable.UserDefinedRowId AND SecondaryTable.UserDefinedFieldId = 1) AS Column1, ,,, (SELECT SecondaryTable.FieldValue FROM UserDefinedData AS SecondaryTable WHERE SecondaryTable.UserDefinedRowID = PrimaryTable.UserDefinedRowId AND SecondaryTable.UserDefinedFieldId = 27) AS Column27,FROM UserDefinedData AS PrimaryTableWHERE PrimaryTable.UserDefinedFieldId = 5 AND Cast(Cast(PrimaryTable.FieldValue AS varchar(64)) AS datetime) > GetDate() ORDER BY PrimaryTable.UserDefinedRowID, PrimaryTable.UserDefinedFieldId Any suggestions would be appreciated. Thanks, Brad
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
I have a complex query which has to do a few calculations. I'm using subqueries to do the calcs, but most of the calcs have to use a value gotten from the first subquery. I don't want to have to type the subquery out each time, so is there a way of assigning it to a variable or putting it in a UDF or SP?
E.g. I have a table with 2 cols - amount, date.
SELECT total_amount, closing_amount, FROM table1 GROUP BY month(date)
Total amount is the SUM(amount) for the month. Closing amount is the Total Amount plus the amounts for the current month with a few extra calcs.
As I have to use SUM(amount) in the second subquery, is there a way I can do it without having to type hte subquery out again?
This is only a basic example, what I'm trying to do will invovle a lot more calcultions.
The users to groups relationship is many-to-many, which is why I created the intermediate table. I would like to return a recordset like: userid, name, groupids 12344, 'Bob', '123,234,345'
If I try to just select groupid from groupadmins: select userid, name, (select groupid from groupadmins where groupadmins.userid = users.userid) as groupids from users
then I'll get an error that a subquery is returning multiple results. Some users are not group admins and those that are may have a single or multiple groups. The only thing I can think of is to select the groupids seperately and use a cursor to loop through the results and build a string with the groupids. Then I would select the string with the rest of the fields that I want for return. Is there a better way to do this?
This is probably very elementary to someone more experienced, but I'm having a hard time coming up with a way to do the following:
SELECT * FROM Transactions WHERE MyField LIKE (SELECT MyValues FROM SearchValues)
But I can't because the subquery will return multiple rows. That's all I'm really trying to do - search all the rows in Transactions.MyField for any of the search values returned from the subquery.
And I can't restructure the SearchValues table to combine them into a single-row comma-delimited field or anything like that.
DOC_NO // REV_NO // FILE_NAME ABC123 // A // abc123.pdf ABC123 // B // abc123_2.docx ABC124 // A // abc124.xlsx ABC124 // A // - ABC125 // A // abc125.docx ABC125 // C // abc125.jpg ABC125 // C // abc125.docx ABC125 // C // - ABC126 // 0 // - ABC127 // A1 // abc127.xlsx ABC127 // A1 // abc127.pdf
I'm looking to select all rows where the DOC_NO and REV_NO appear only once.(i.e. the combination of the two values together, not any distinct value in a column)
I have written the sub query to filter the correct results;
SELECT DOC_NO, REV_NO FROM [MYTABLE] GROUP BY DOC_NO, REV_NO HAVING COUNT(*) =1
I now need to strip out the records which have no file (represented as "-" in the FILE_NAME field) and select the other fields (same table - for example, lets just say "ADD1", "ADD2" and "ADD3")
I was looking to put together a query like;
SELECT DOC_NO, REV_NO, FILE_NAME, ADD1, ADD2, ADD3 FROM [MYTABLE] WHERE FILE_NAME NOT LIKE '-' AND DOC_NO IN (SELECT DOC_NO, REV_NO FROM [MYTABLE] GROUP BY DOC_NO, REV_NO HAVING COUNT(*) =1)
But of course, DOC_NO alone being in the subquery select is not sufficient, as (ABC125 /A) is a unique combination, but (ABC125 /C) is not, but these results would be pulled in.
I also cannot simply add an additional "AND" clause on its own to make sure the REV_NO value appears in the subquery, because it is highly repetitive and would have to specifically match the DOC_NO)
What is the easiest way of ensuring that I only pull in the records where both the DOC_NO and REV_NO (combination) are unique, or is there a better way of putting this select together altogether?
Hi there, I need to select rows from a table, but include the top 3 rows of another linked table as a single field in the results. Here is my basic structure:
I have a query where I need to select a bunch of rows from one table, hypothetically we'll call them ssn, first name, last name, and I need to select a subquery which coalesces a bunch of rows together (in no case will there be only one row returned from that subquery).
Anyone know how I could go about this? I'll give you an example of what I've tried, but it does not work currently.
delcare @path varchar(255) select e.ssn,
e.firstname, e.lastname, ( @path = select coalesce(@path + ', ', '') from space s1 inner join space s2
on s1.lft BETWEEN s2.lft AND s2.rgt and s1.rgt BETWEEN s2.lft AND s2.rgt where s1.spaceID = 133225 select @path) from employees e where e.id = 5
Using that spaceID is guaranteed to give me four rows, and I need them coalesced together, but I can't just use a function (too slow on the scale it would be used), any thoughts?
I would like to know how i can handle multiple columns returned by a subquery via IN clause in case of sql server 2005. I can do that in oracle by using the following statement:
DELETE FROM TEST1 WHERE (ID, ID1) NOT IN (SELECT ID,ID1 FROM TEST2);
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar, RDR1.U_Variety, (SELECT OITM.U_Variety FROM OWOR INNER JOIN WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN OITM INNER JOIN OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity, OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet, OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode FROM OWOR AS t0 INNER JOIN ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode WHERE (t0.Status <> 'L')
Hey all,I am having some serious trouble getting the correct syntax for a select statement to work the way I need it, any help I could get on this would be greatly appreciated.I have a table called Units which stores computers and a table called Software which stores software. I have a bit field in Units called OEM, when this is set to true I don't want the select statement to pull this unit down when I am assigning software to other units.Here is my select statement: SELECT Software.SID, Software.SN, Software.Name, Users.First + ' ' + Users.Last AS 'Assigned User', Units.Make + '-' + Units.Model AS 'Assigned Unit' FROM dbo.Software LEFT JOIN dbo.Units ON Software.SN = Units.SN LEFT JOIN dbo.Users ON Units.UID = Users.UID WHERE (Units.OEM = 'FALSE') AND (Software.SN LIKE '%' + @SearchString + '%')Everything works as expected, unless of course the unit has no software assigned to it yet, it won't return it because its not tied to a Units.OEM field. Is there anyway to have it return ALL records that even arn't joined OR are joined but have OEM set to false?Thanks, let me know if I need to clear anything up.-Matthew
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone) FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField from MyOptions where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField from MyTimetable where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
I'm at a bit of a loss here. My T-SQL skills are not up to the task at hand here :(
I've got company records in one table and SIC codes that correlate to the companies linked by the company ID. So, I can run the query, but the output I get is multiple records for each company, because some companies have multiple SIC codes associated with them.
I understand how to get only one record, but what I want to do is create a result set that has all the SIC codes associated with one company. Possibly in a comma seperated list, that would count as one field.
Anyone have any idea how to bring back all the SIC codes for one company as one variable (or multiple variables, but in one record)?
I am trying to join seperate records into one return set. IE. select accountNum, flag1, flag2, flag3 from MyDB where flag1='A' or flag2='B' or Flag3='C'
The problem is that there could be 2 records with the same account number but flag1 ='A' Flag2='B' ect.
This would return to lines. Is there a way that I can have all return sets show up on one line only. Eliminating duplicate return sets???
I am new at sql programming and I need all the help i can possibly get..Im using SQL Server 2000 and I have been given an assignment which follows:
- i have to add 100 new records at once to an existing table. I have to do it through SQL Server only( query analizer,i suppose) and I am not allowed to use any other languages to achieve this. Now, my question is how can i do it through sql only? What is the code i have to write to make this thing work? I simply dont know where and how to start...
Dear ALL, I have two tables with named Reports and Backup_Reports with same fields. Id(numeric), MobileNumber(varchar), SmsBody(varchar),date(datetime),Status(char). Here what I want is, if I am searching some records by entering the mobile number then the sql query first will search on the first table Reports then it will show the related records and again the query will search on the second table Backup_Reports then will show related records from this table also. What I mean is, if I am searching some records by mobilenumber first will search on the Reports and then will go to second table Backup_Reports and will show all the related records together. How can I handle this?
I have a query that returns multiple identical records, however it shouldonly return one. Indeed there is only one record for the OrderActionTypecodeof 'P' yet there are two orderactions so it returnd both.Oddly the second query returns only the desired single record but wihtoutall the additional fields I need. Does the Inner join somehow mess with thequery?ThanksQuery 1SELECT Orders.OrderID, Orders.TicketID, A.AttemptID, E.EventID,E.AssetCode AS Asset, Orders.FK_Prod_Alias AS Alias, Orders.ContractCode,L.OrderLegCode AS OrderLeg, M.MarketActionName ASAction, Orders.OrderVolume AS Volume, Orders.OrderPrice AS Price,T.OrderTypeName AS OrderType, S.StatusName AS Status,Orders.FilledVolume AS Filled, Orders.OriginalOrderDateTime,Orders.PlaceOrderDateTime,Orders.MonitorFlagFROM Orders INNER JOINOrderAction OA ON Orders.OrderID = OA.OrderID INNERJOINAttempt A ON Orders.AttemptID = A.AttemptID INNER JOINEvent E ON A.EventID = E.EventID INNER JOINMarketAction M ON Orders.MarketActionCode =M.MarketActionCode INNER JOINOrderLegs L ON Orders.OrderLegCode = L.OrderLegCodeINNER JOINOrderType T ON Orders.OrderTypeCode = T.OrderTypeCodeINNER JOINOrderState S ON Orders.Status = S.Status ANDOrders.OrderID =(SELECT OrderIDFROM ORDERACTIONWHERE ORDERACTIONID =(SELECTMAX(ORDERACTIONID)FROMORDERACTIONWHEREOrderActionTypeCode = 'P'))Query 2SELECT OrderID, TicketIDFROM OrdersWHERE (OrderID =(SELECT OrderIDFROM ORDERACTIONWHERE ORDERACTIONID =(SELECTMAX(ORDERACTIONID)FROMORDERACTIONWHEREOrderActionTypeCode = 'P')))
Hi, I am a rookie at sql and asp.net. I have another post is the asp.net section http://forums.asp.net/thread/1589094.aspx. Maybe I posted it in the wrong section. I am collecting multiple rows from a gridview. I validated/confirmed I am capturing the correct values. How ever, I am having major problems passing these to an sql database. The problems that I know of is declaring my parameters correctly and then adding the values through a for each statement. I added the post over 30 hours ago with only me as the replier trying to refining or clarifying the problem. Part 1 is the code that works, part 2 is my problem, I have tried may different ways to resolve this but no luck. Regards! Protected Sub Botton1_click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click**************** PART1 **************************Dim gvIDs As String = ""Dim ddIDs As String = ""Dim chkBox As Boolean = FalseDim chkBox1 As Boolean = False'Navigate through each row in the GridView for checkbox items ddIDs = DropDownList1.SelectedValue.ToStringFor Each gv As GridViewRow In GridView1.RowsDim addChkBxItem As CheckBox = CType(gv.FindControl("delCheckBox"), CheckBox)Dim addChkBx1Item As CheckBox = CType(gv.FindControl("CheckBox1"), CheckBox) If addChkBxItem.Checked Then chkBox = True gvIDs = CType(gv.FindControl("TestID"), Label).Text.ToString Response.Write(ddIDs + " " + gvIDs + " ") If addChkBx1Item.Checked Then chkBox1 = True Response.Write("Defaut Item") End If Response.Write("<br />")End IfNext******************** Part 2 *****************************************************Dim cn As SqlConnection = New SqlConnection(SqlDataSource1.ConnectionString)If chkBox ThenTry Dim insertSQL As String = "INSERT INTO testwrite (TestLast, test1ID, TestDefault) VALUES (@TestLast, @test1ID, @TestDefault)" Dim cmd As SqlCommand = New SqlCommand(insertSQL, cn) cmd.Parameters.AddWithValue("@TestLast", DropDownList1.SelectedValue.ToString) cmd.Parameters.AddWithValue("@test1ID", CType(gv.FindControl("TestID"), Label).Text.ToString) cmd.Parameters.AddWithValue("@TestDefault, CType(gv.FindControl("CheckBox1"), CheckBox)) cn.Open() For Each ..... Problems here also Next cmd.ExecuteNonQuery()Catch err As SqlException Response.Write(err.Message.ToString)Finally cn.Close()End TryEnd If
I have the Temporary table:ItemDetailID (int)FieldID (int)FieldTypeID (int)ReferenceName (Varchar(250))[Value] (varChar(MAX))in one instance Value might equal: "1, 2, 3, 4"This only happens when FieldTypeID = 5.So, I need an insert query for when FieldTypeID = 5, to insert 5 rows into the Table FieldListValues(ItemDetailID, [value])I have created a function to split the [Value] into a table of INTs Any Advice?
