Still new to SQL and having fun learning it. Here's my latest question.
I have a table 'Fields' that has a column named 'label'.
In label, I have values like 'Total Number of Orders'
I want to replace the text Number with a #. How can I do that for all records that contain 'Number'?
Thanks
I'm attempting to move data from a text field to a numeric field, but I need to be able to remove any non-numeric characters in that field first, but I do not want to lose the numeric data.
In the code below, the Value table is the table that will be converted.
INSERT INTO IntegerValues (FK_ReferenceID,FK_ReferenceType,FK_FieldID,FieldProperty,Value,CreationDate,CreatedBy,Revision)
SELECT FK_ReferenceID,FK_ReferenceType,FK_FieldID,FieldProperty,Value,CreationDate,CreatedBy,Revision
FROM StringValues WHERE FK_FieldID in (select id from ##tmpFields)
Any ideas on how I may do that?
I’m getting ASCII characters in one column of my table. So I want to replace same column value in NON ASCII characters.
Note – values in column must be same
Hi All,
I have a column in one of my tables and I need to display only Alphabets and Numbers of this column, preferably in one single query.
Eg: Column Value --> This is 4th value with no *, &, # symbols.
I want this to be displayed as
Thisis4thvaluewithnosymbols
(All spaces and characters other than alphabets and numerics are gone)
Pleas help.
Thanks
I've got a lot of %20 characters in my tables, and need to remove them however I get the error:
Argument data type ntext is invalid for argument 1 of replace function.
My Code:
UPDATE cmsPropertyData
SET dataNtext = REPLACE(dataNtext,'%20','')
WHERE cmsPropertyData.contentNodeId = 1151
I am working with a large amount of text data in a single column. I am in the process of pumping that column of data into a delimited text file. The data in the column has new line characters that I need to remove. I need to data to be in a single line in the text file.
So far the things that I have tried are not working. What I try for removing the new line characters?
Hi,
I am populating a dataset in .net with output from sql 2005 database. One of the columns in the table is a 'varchar(max)' type. This dataset is then converted to XML using WriteXml and written to a .xml document. But due to the presence of invalid characters, this process errors out.
Is there any way using which these invalid characters can be replaced at the database level itself when querying on the table?
The error that is produced is as follows:
' ', hexadecimal value 0x1C, is an invalid character. Line 32201, position 924.
Thanks,
Nisha
need help
replace characters on condition in table and cells
but only if
if i put number or 1 , 2 , 3 , 4 above the cell of the eployee for example( employee id=222 name =bbbb day1)
i replace characters with '0' and '#'
and it must work dynamically AND replace ONLY THIS characters
table before the replace
id fname val day1 day11 day111 day2 day22 day222
------------------------------------------------------
111 aaaa 2 1 3
111 aaaa 1 A C
222 bbbb 2
222 bbbb 1
333 cccc 2
333 cccc 1
444 dddd 2
444 dddd 1
555 eeee 2 2
555 eeee 1 B
table after the replace
id fname val day1 day11 day111 day2 day22 day222
------------------------------------------------------
111 aaaa 2 0 0
111 aaaa 1 # #
222 bbbb 2
222 bbbb 1
333 cccc 2
333 cccc 1
444 dddd 2
444 dddd 1
555 eeee 2 0
555 eeee 1 #
tnx FOR THE HELP
i need to find and all special characters and replace with space.
Following query works well for me to finding all rows having special char.
SELECT DESC FROM TBL_DESC
WHERE DESC LIKE '%[^A-Z0-9 ]%'
replacing special char with space . i need to remove special chars only.
need help
condition 1
replace characters on condition in table and cells
but only if
how to do it - if i put * (asterisk) like in employee 111 in day1 - the the upper characters the (A S B)
i replace characters with '-'
and it must work dynamically
condition 2
replace characters on condition in table and cells
but only if
if i put number or 1 , 2 , 3 , 4 above any cell for example( employee id=222 name =bbbb day1)
i replace characters with '0' and '#'
and it must work dynamically
table before the replace
id
fname
val
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
day5
day55
day555
111
aaaa
2
A
S
B
e
t
y
R
Y
M
j
o
p
111
aaaa
1
*
*
*
*
222
bbbb
2
1
1
222
bbbb
1
A
-
-
-
B
-
333
cccc
2
333
cccc
1
444
dddd
2
3
4
444
dddd
1
-
-
C
C
555
EEE
2
A
G
C
555
EEE
1
*
table after the replace
id
fname
val
day1
day11
day111
day2
day22
day222
day3
day33
day333
day4
day44
day444
day5
day55
day555
111
aaaa
2
-
-
-
-
-
-
-
-
-
-
-
-
111
aaaa
1
null
null
null
null
222
bbbb
2
0
0
222
bbbb
1
#
-
-
-
#
-
333
cccc
2
333
cccc
1
444
dddd
2
0
0
444
dddd
1
-
-
#
#
555
EEE
2
-
-
-
555
EEE
1
null
tnx for the help
I want to replace special characters and space except '-' Tried with Pathindex and function but not getting expected results.
Ex: Input kjkdjfdf-234#kei$ ewiw
output:Â kjkdjfdf-234keiewiw
I am trying to replace all special characters in a column with one special character.
Example:
Table: dbo.Employee
Column: Name
Name
-------
edwardneuman!"<]
mikemoreno)'>$:
JeffJensen"?>"
I am trying to get the namepart to the left of ANY special character. To achieve this, I am thinking of replacing all the special characters with a single special character so that I can find the first occurrence of that special character and grab left of the special character (SUBSTRING/CHARINDEX). This way I don't need to loop through all the special characters.
I am expecting the following results:
Name
-------
edwardneuman<<<<
mikemoreno<<<<<
JeffJensen<<<<
There is a table [Formula_Calc] with formula calculations that need to be replaced with relevant values based on another table [Totals]
[Totals]
RowNo|Total
F1|240
F2|160
F3|180
F11|1000
F12|1500
F13|2000
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16.
Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100);
DECLARE @Total NVARCHAR(100);
SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total)
FROM [Totals]
SET @Total='select '+@formula
EXECUTE sp_executesql @Total;
PRINT @Total;
I'm trying to replace special characters in SQL SERVER and all the solutions for this RDBMS that I found, it uses loops and the source of my data it's in Oracle. in ORACLE and they use REGULAR EXPRESIONS to solve it..Do you know what its the better option to replace special characters? Using loops in SQL SERVER or REGULAR EXPRESSIONS in ORACLE ?
View 5 Replies View RelatedRESOLVED RESOLVED RESOLVED
DOH! When I rebuilt the OS, I changed the data partition ID's, and didn't remember to change them in the connetion strings
Not great, but better than continuing to bang head against wall.
Would like to say to MS appreciators that the VS2005 reinstall actually went quite well, considering.
===========================================================================
I built an app, works fine. Had the development environment working fine (VS2005 (SP0) and SQL Server Express). It had been stable for months, no problem.
Then I had to reinstall XP Pro...(finally threw too many conflicting programs into it, I guess...)
I managed to get VS2005 reinstalled ok. However, when I opened and compiled my existing app in VS2005, using Cassini, I got the dreaded error:
An attempt to attach an auto-named database for file <file string> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I also get this error for the compiled copy of the app on the same machine, running on IIS. (Where it also previously worked fine).
The Connection strings are all of the form
connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=(specific file string).MDF;Integrated Security=True;User Instance=True"
I appreciate that there are zillions of posts on this issue. I'm hoping that someone might know why this should happen in this particular case.
The thing that's different about this case is that the app was working fine; I have the app deployed on a demo machine and also on a remote server as well as on the development machine.
The only thing that changed is that there was this fresh install of SQL Server Express.
I tried using >> sp_configure user instances enabled','1';RECONFIGURE <<< in SSMSEE, which took, but didn't help.
So something is different in SSE. Since the app is stable everywhere else, I REALLY don't want to go through and adjust the connection strings...MUCH better to figure out what SSE needs to be happy with the existing connection strings...as it was before.
Any suggestions would be appreciated.
Thanks!
EDIT----TRIED SOME THINGS:
Changed folder and file permissions to allow ASPNET full access to the .mdf's and log files (though never had to do this before on the development machine.) No change...
Can see the table contents within the .mdf through SSMSE, and also through Server Explorer in VS2005.
So because the problem happens with both IIS and Cassini, I'm assuming it's got to be an issue between ASPNET and SSE.
EDIT --- TRIED SOME MORE THINGS:
I dimly remember that when I had this problem before, it was that the error message was too "dumb". It wasn't my file that had the permissions problems, it was that the SSE System Databases had to have permissions with respect to ASPNET.
I tried to set that up but I'm a complete newb on this area, so I don't know if I did it right. In SSMSE I created a Login for MyComputer/ASPNET, and gave it all permissions and roles, and then made it an owner for the four system databases...but no joy.
Any pointers on this last piece would be helpful.
EDIT - MORE INFO
The error details
[SqlException (0x80131904): An attempt to attach an auto-named database for file <filestring>.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956
System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
In my application I must store over 16000 character in a sql table field . When I split into more than 1 field it gives "unclosed quotation mark" message.
How can I store over 16000 characters to sql table field (only one field) with language specific characters?
Thanks
Hi everybody,
I would like to know if there is any property in sql2000 database to separate lowercase characters from uppercase characters. I mean not to take the values €˜child€™ and €˜Child€™ as to be the same. We are transferring our ingres database into sqlserver. In ingres we have these values but we consider them as different values. Can we have it in sqlserver too?
Hellen
Good day experts,
I wonder if i got an answer for this.
How can i iliminate a letters from a set of integers and characters using a SQL Statement
for ex:
ABC9800468F
is that possible?
is there a function that i can use to iliminate them?
I am using a function to fill a listbox in asp.net If I run it using the sql statement in the code, it works. if I use the sp I get an error saying the sp expects @strBookingNo which wasn't supplied. I have stepped through the function and there is a value in txNewBookingNo.text. Here's my function - the part commented out is the part that works,but I'd rather do it through an sp. I've included my sp too
Function GetFacilitiesBookings()
Dim MySQL As String = "spRB_GetFacilitiesBookings"
Dim MyConn As New SqlConnection(strConn)
Dim Cmd As New SqlCommand(MySQL, MyConn)
Cmd.CommandType = CommandType.StoredProcedure
Cmd.Parameters.Add(New SqlParameter("@strBookingNo", CInt(Me.txtNewBookingNo.Text)))
Dim myDataAdapter As SqlDataAdapter = New SqlDataAdapter(MySQL, strConn)
Dim ddlDataSet As New DataSet
myDataAdapter.Fill(ddlDataSet, "tblRB_FacilitiesBookings")
Return ddlDataSet
'Dim strSQL As String
'strSQL = "Select * from tblRB_FacilitiesBookings where FB_BookingNo = " & CInt(Me.txtNewBookingNo.Text) & " and FB_Cancelled =0"
'Dim myDataAdapter As SqlDataAdapter = New SqlDataAdapter(strSQL, strConn)
'Dim ddlDataset As New DataSet
'ddlDataset.Clear()
'myDataAdapter.Fill(ddlDataset, "tblRB_FacilitiesBookings")
'Return ddlDataset
End Function
CREATE Procedure [spRB_GetFacilitiesBookings]
@intBookingNo integer
as
Select * from tblRB_FacilitiesBookings where
FB_BookingNo = @strBookingNo and
FB_Cancelled = 0
GO
Can anyone point me to a site which explains SQL syntax. ie I want to put brackets around a variable which holds a string of values for an IN clause.
Dim mySQLstr As String = "SELECT * from vweAvailableRooms where BD_RoomRef IN '"(" & Me.Session("RoomRefLogin") & ")"'"
I have an sp which I should return the latest date in my sql table. Howver I am getting this error 'Implicit conversion from data type datetime to bigint is not allowed. Use the CONVERT function to run this query. ' Here's my sp and my code which calls the sp.
CREATE PROCEDURE spRB_MaxDate (
@MaxDate datetime OUTPUT
)
AS
SELECT @MaxDate =MAX(BD_DateRequired)
FROM tblRB_BookingDates
RETURN
GO
Here's how I call it
Dim MySQL1 As String = "spRB_MaxDate"
Dim myConn1 As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString"))
Dim Cmd1 As New SqlCommand(MySQL1, myConn1)
Cmd1.CommandType = CommandType.StoredProcedure
'Add the parameters
Dim outParm As SqlParameter = New SqlParameter("@MaxDate", 0)
outParm.Direction = ParameterDirection.Output
Cmd1.Parameters.Add(outParm)
myConn1.Open()
Cmd1.ExecuteNonQuery()
myConn1.Close()
'
' get value of new id
Dim MaxDate As DateTime = Cmd1.Parameters("@MaxDate").Value
Hi,
I have installed SSRS and created a .net application... now when I try to open the report viewer, I get the error " the permission granted to user 'domainuser' are insufficient for performing this operation. (rsAccessDenied)" I have searched the net hi and low and cant seem to find an adequate answer... something to do with roles or permissions? I have assigned permissions to this user on the ssrs database, yet I still cant seem to view the report. It works fine in my test environment (as it usually does ) any help on this would be greatly appreciated as to be honest, I dont really know what im doing here.
"Impossible is Nothing"
I am selecting from two tables, with a one-to-many relationship.
Select t2.*
From Table1 t1
inner join Table2 on t1.id = t2.id
where t2.Field2 in (1,3)
There are times when there are 2 or more entries in table2 that relate to table1. I want to only display 1 of these entries, (either will do), I just dont want to display all.
Hi we recently depoyed SSRS 2005 on two servers along with our web application.
the extranet setup
IIS Web server (app server) in DMZ linked to database server sat behind our corporate firewall. SSL installed on IIS server. SSRS app is on the IIS, with its db on the main database server behind corproate firewall.
we have a simple link going from our app to the reporting services link
however when we enter a login (incl admin) it fails with the message 'The remote name could not be resolved: "ourdomain.com"
windows authentication at the moment.
any help much appreciated.
thanks
Hi,
I am pretty new to harcore ASP.NET and .NET in general but I know the basics of the language and stuff like that. Basically I used to be a hardcore object pascal Delphi developer doing Windows Applications but have now moved to .NET world. The reason I posted this question here is I couldn't find any other specific place to ask so here it goes.
To get me started with good programming source and practices I downloaded the ASP.NET TimeTracker Starter Kit and after some modificaion in connection string (using SQL 2005 Developer edition not the Express one) I have managed to make it work. Things done in there are pretty interesting way by using a delegate to retrieve data and present it using databound controls.
As much simple as it sounds I am more of a fan of not using too many databound controls except in dropdown box, list box and stuff like that. So basically I need to develop DataAccessLayer (DAL) in such a way that it's useful for both Windows and Web application. So with my research I found that I should be using DataSets in the DAL because they are serializable and thatz what Web Applications & Services love over using SqlDataReader. Other advantage of using DataSet is to use ForEach syntex over While Loop in SqlDataReaders. So below is some code I extracted from the TimeTracker Starter Kit to get me started.
I also noticed that the return result is a list array of certain object, in this case Category. So does it mean that it can be used in frontend using ForEach syntex? How can I convert the code below to use DataSets over SqlDataReader? Private Delegate Sub TGenerateListFromReader(Of T)(ByVal returnData As SqlDataReader, ByRef tempList As List(Of T))
Public Overrides Function GetAllCategories() As List(Of Category)
Dim sqlCmd As SqlCommand = New SqlCommand()
SetCommandType(sqlCmd, CommandType.StoredProcedure, SP_CATEGORY_GETALLCATEGORIES)
Dim categoryList As New List(Of Category)()
TExecuteReaderCmd(Of Category)(sqlCmd, AddressOf TGenerateCategoryListFromReader(Of Category), categoryList)
Return categoryList
End Function
Public Overrides Function GetCategoryByCategoryId(ByVal Id As Integer) As Category
If Id <= DefaultValues.GetCategoryIdMinValue() Then
Throw New ArgumentOutOfRangeException("Id")
End If
Dim sqlCmd As SqlCommand = New SqlCommand()
AddParamToSQLCmd(sqlCmd, "@CategoryId", SqlDbType.Int, 0, ParameterDirection.Input, Id)
SetCommandType(sqlCmd, CommandType.StoredProcedure, SP_CATEGORY_GETCATEGORYBYID)
Dim categoryList As New List(Of Category)()
TExecuteReaderCmd(Of Category)(sqlCmd, AddressOf TGenerateCategoryListFromReader(Of Category), categoryList)
If categoryList.Count > 0 Then
Return categoryList(0)
Else
Return Nothing
End If
End Function
Private Sub TGenerateCategoryListFromReader(Of T)(ByVal returnData As SqlDataReader, ByRef categoryList As List(Of Category))
Do While returnData.Read()
Dim actualDuration As Decimal = 0
If Not returnData("CategoryActualDuration") Is DBNull.Value Then
actualDuration = Convert.ToDecimal(returnData("CategoryActualDuration"))
End If
Dim category As Category = New Category(CStr(returnData("CategoryAbbreviation")), actualDuration, _
CInt(returnData("CategoryId")), CDec(returnData("CategoryEstimateDuration")), CStr(returnData("CategoryName")), _
CInt(returnData("ProjectId")))
categoryList.Add(category)
Loop
End Sub
Hope this makes sense. Sorry if I have posted this in a wrong section..!
Cheers,Nirav
Here is a simple grid view page I made.
http://visualboxscore.com/boxscores/cfb_box_scores.aspx
Ultimately I want to be able to filter every field that is listed. However, for now I am just learning this stuff and would like to just filter the by the name in the "offense" field.
However, it is not binding the selection thus not filtering it out. Do you see any problems in my code?
<%@ Page Language="VB" %>
<html>
<head id="Head1" runat="server">
<title>GridView DetailsView Master-Details (2 Page)</title>
</head>
<body>
<form id="form1" runat="server">
<b>Choose a team:</b>
<asp:DropDownList ID="DropDownList1" DataSourceID="SqlDataSource2" AutoPostBack="true"
DataTextField="offense" Runat="server" />
<asp:SqlDataSource ID="SqlDataSource2" Runat="server" SelectCommand="SELECT DISTINCT [offense] FROM [cfb_boxscores]"
ConnectionString="<%$ ConnectionStrings:ConnectionString1 %>" />
<br />
<br />
<asp:GridView ID="GridView1" AllowSorting="True" AllowPaging="false" Runat="server"
DataSourceID="SqlDataSource1" DataKeyNames="offense"
AutoGenerateColumns="False">
<Columns>
<asp:BoundField HeaderText="Date" DataField="date" DataFormatString="{0:MM/dd/yy}" ItemStyle-HorizontalAlign="Center" SortExpression="date" />
<asp:BoundField HeaderText="Offense" DataField="offense" ItemStyle-HorizontalAlign="Center" SortExpression="offense" />
<asp:BoundField HeaderText="Defense" DataField="defense" ItemStyle-HorizontalAlign="Center" SortExpression="defense" />
<asp:BoundField HeaderText="Rush Yards" DataField="rush_net" ItemStyle-HorizontalAlign="Center" SortExpression="rush_net" />
<asp:BoundField HeaderText="YPC" DataField="yards_per_carry" DataFormatString="{0:#.##}" ItemStyle-HorizontalAlign="Center" SortExpression="yards_per_carry" />
<asp:BoundField HeaderText="Pass Yards" DataField="pass_yards" ItemStyle-HorizontalAlign="Center" SortExpression="pass_yards" />
<asp:BoundField HeaderText="YPA" DataField="yards_per_att" ItemStyle-HorizontalAlign="Center" SortExpression="yards_per_att" />
<asp:BoundField HeaderText="Total Yards" DataField="total_yards" ItemStyle-HorizontalAlign="Center" SortExpression="total_yards" />
<asp:BoundField HeaderText="YPP" DataField="yards_per_play" ItemStyle-HorizontalAlign="Center" SortExpression="yards_per_play" />
<asp:BoundField HeaderText="Points" DataField="points" ItemStyle-HorizontalAlign="Center" SortExpression="points" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="SqlDataSource1" Runat="server" SelectCommand="SELECT [date], [offense], [defense], [rush_net], [yards_per_carry], [pass_yards], [yards_per_att], [total_yards], [yards_per_play], [points] FROM [cfb_boxscores]"
ConnectionString="<%$ ConnectionStrings:ConnectionString1 %>">
<SelectParameters>
<asp:ControlParameter Name="Offense" ControlID="DropDownList1" />
</SelectParameters>
</asp:SqlDataSource>
</form>
</body>
</html>
overall I want to format the table look and and background but for now I just want to see how this stuff functions.
Thanks!!
I have a working sp:
SELECT dbo.Job.CompanyJobId, dbo.Item.UnitOfMeasure, dbo.Job.Name, dbo.Job.ChangeDate,
dbo.Region.CompanyRegionID, dbo.Job.Active,
sum(case dbo.SourceType.CompanySourceTypeId WHEN 'MA' then dbo.ProductionEvent.AlternateQuantity ELSE 0 END) AS material,
sum(case dbo.SourceType.CompanySourceTypeId WHEN 'PR' THEN dbo.ProductionEvent.Quantity ELSE 0 END) AS production
FROM dbo.job
inner join dbo.Event ON dbo.Job.JobGuid = dbo.Event.JobGuid
inner join dbo.ProductionEvent on dbo.Event.EventGuid = dbo.ProductionEvent.EventGuid
left outer join dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid
left outer JOIN dbo.Item ON dbo.Event.ItemGuid = dbo.Item.ItemGuid
inner JOIN dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid
inner JOIN dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid
left OUTER JOIN dbo.Region ON dbo.Job.RegionGuid = dbo.Region.RegionGuid
WHERE dbo.Job.CompanyJobId = 3505048 and dbo.Item.UnitOfMeasure = 'TN'
and(dbo.SourceType.CompanySourceTypeId = 'PR' or dbo.SourceType.CompanySourceTypeId = 'MA')
GROUP BY dbo.Job.CompanyJobId, fMeasure, dbo.Region.CompanyRegionID,
dbo.Job.Name, dbo.Job.ChangeDate, dbo.Job.Active
Now I need to inser another join like this:
dbo.Event ON dbo.EmployeeLaborEvent.EventGuid = dbo.Event.EventGuid INNER JOIN
and I get error:
Server: Msg 1013, Level 15, State 1, Line 15
Tables or functions 'dbo.Event' and 'dbo.Event' have the same exposed names. Use correlation names to distinguish them.
Not sure what this means. Thank you.
I am reading over a job description and I am unsure of that the employer is refering to when they say "Instance Parameters".
Here is the context that it is used in.
* Tune and optimize SQL statements, Instance Parameters, and Data Storage including the identification of performance related issues.
You can't have but one default contraint in a DB named
df_revisiondate Default getdate()
I thought that sense they were being created on different Tables that it would not matter. It was a way to maintain a type of consistency by giving them the same name. However, it SEEMS to have caused all my tables to crash.
thanks!
Hi all.. i have a problem.
Let say i have 3 tables. Let's name it Main, table2, table3. in table Main, there are 4 colums(M_id,M_name M_tbl2, M_tbl3). In table2 and table3, each has 3 colums. For table2 the colums are id, tbl2Name, tbl2Desc and for table3(id, tbl3Name, tbl3Desc).
M_tbl2 will refer to id in table2 and M_tbl3 will refer to id in table3. How am i going to get M_id, M_name, tbl2Name, tbl3Name in one query?
I am creating a view in SQL using the View tab in the database and adding the table and the fields I need. For criteria I need to have 28 'or' s . How do I insert more columns on the end of my view ?
View 2 Replies View RelatedI have test tables with key fields that increment by one each time a record is added. If I delete all the records in a table (using a delete query) is there a way I can make the key start at 1 again.
The reason I ask is that by using test data in these tables (and there are a lot of records),when I clear them out and append the live data the key field starts at something like 764525
Sorry if this sounds dumb but I can't find the answer . I have created a scheduled job on my test database using the wizard. How do I edit it or delete it ? Step by step instructions please
I have never done this before so am just experimenting at the moment.