I have a stored procedure where I would like to use substring in the where clause, if possible.
CREATE PROCEDURE GetJobList
@PlantId char(3)
Select ......
From ......
WHERE (dbo.Source.CompanySourceId = 'PROD' and dbo.Batch.ReportDate >= @DateFrom and dbo.Batch.ReportDate <= @DateTo and (if @PlantId <> ' ' then SUBSTRING(dbo.Job.CompanyJobId, 1,3) = @PlantId))
I get syntax error "Incorrect syntax near 'if, incorrect sysntax near 'then'....
I built an app, works fine. Had the development environment working fine (VS2005 (SP0) and SQL Server Express). It had been stable for months, no problem.
Then I had to reinstall XP Pro...(finally threw too many conflicting programs into it, I guess...)
I managed to get VS2005 reinstalled ok. However, when I opened and compiled my existing app in VS2005, using Cassini, I got the dreaded error:
An attempt to attach an auto-named database for file <file string> failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I also get this error for the compiled copy of the app on the same machine, running on IIS. (Where it also previously worked fine).
I appreciate that there are zillions of posts on this issue. I'm hoping that someone might know why this should happen in this particular case.
The thing that's different about this case is that the app was working fine; I have the app deployed on a demo machine and also on a remote server as well as on the development machine.
The only thing that changed is that there was this fresh install of SQL Server Express.
I tried using >> sp_configure user instances enabled','1';RECONFIGURE <<< in SSMSEE, which took, but didn't help.
So something is different in SSE. Since the app is stable everywhere else, I REALLY don't want to go through and adjust the connection strings...MUCH better to figure out what SSE needs to be happy with the existing connection strings...as it was before.
Any suggestions would be appreciated.
Thanks!
EDIT----TRIED SOME THINGS:
Changed folder and file permissions to allow ASPNET full access to the .mdf's and log files (though never had to do this before on the development machine.) No change...
Can see the table contents within the .mdf through SSMSE, and also through Server Explorer in VS2005.
So because the problem happens with both IIS and Cassini, I'm assuming it's got to be an issue between ASPNET and SSE.
EDIT --- TRIED SOME MORE THINGS:
I dimly remember that when I had this problem before, it was that the error message was too "dumb". It wasn't my file that had the permissions problems, it was that the SSE System Databases had to have permissions with respect to ASPNET.
I tried to set that up but I'm a complete newb on this area, so I don't know if I did it right. In SSMSE I created a Login for MyComputer/ASPNET, and gave it all permissions and roles, and then made it an owner for the four system databases...but no joy.
Any pointers on this last piece would be helpful.
EDIT - MORE INFO
The error details
[SqlException (0x80131904): An attempt to attach an auto-named database for file <filestring>.MDF failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1956 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +170 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +349 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181
I am using a function to fill a listbox in asp.net If I run it using the sql statement in the code, it works. if I use the sp I get an error saying the sp expects @strBookingNo which wasn't supplied. I have stepped through the function and there is a value in txNewBookingNo.text. Here's my function - the part commented out is the part that works,but I'd rather do it through an sp. I've included my sp too
Function GetFacilitiesBookings()
Dim MySQL As String = "spRB_GetFacilitiesBookings" Dim MyConn As New SqlConnection(strConn) Dim Cmd As New SqlCommand(MySQL, MyConn) Cmd.CommandType = CommandType.StoredProcedure Cmd.Parameters.Add(New SqlParameter("@strBookingNo", CInt(Me.txtNewBookingNo.Text))) Dim myDataAdapter As SqlDataAdapter = New SqlDataAdapter(MySQL, strConn) Dim ddlDataSet As New DataSet
'strSQL = "Select * from tblRB_FacilitiesBookings where FB_BookingNo = " & CInt(Me.txtNewBookingNo.Text) & " and FB_Cancelled =0" 'Dim myDataAdapter As SqlDataAdapter = New SqlDataAdapter(strSQL, strConn) 'Dim ddlDataset As New DataSet 'ddlDataset.Clear()
I have an sp which I should return the latest date in my sql table. Howver I am getting this error 'Implicit conversion from data type datetime to bigint is not allowed. Use the CONVERT function to run this query. ' Here's my sp and my code which calls the sp.
CREATE PROCEDURE spRB_MaxDate ( @MaxDate datetime OUTPUT ) AS SELECT @MaxDate =MAX(BD_DateRequired) FROM tblRB_BookingDates
RETURN GO
Here's how I call it
Dim MySQL1 As String = "spRB_MaxDate" Dim myConn1 As SqlConnection = New SqlConnection(ConfigurationSettings.AppSettings("ConnectionString")) Dim Cmd1 As New SqlCommand(MySQL1, myConn1) Cmd1.CommandType = CommandType.StoredProcedure
'Add the parameters
Dim outParm As SqlParameter = New SqlParameter("@MaxDate", 0)
I have installed SSRS and created a .net application... now when I try to open the report viewer, I get the error " the permission granted to user 'domainuser' are insufficient for performing this operation. (rsAccessDenied)" I have searched the net hi and low and cant seem to find an adequate answer... something to do with roles or permissions? I have assigned permissions to this user on the ssrs database, yet I still cant seem to view the report. It works fine in my test environment (as it usually does ) any help on this would be greatly appreciated as to be honest, I dont really know what im doing here.
I am selecting from two tables, with a one-to-many relationship.
Select t2.* From Table1 t1 inner join Table2 on t1.id = t2.id where t2.Field2 in (1,3)
There are times when there are 2 or more entries in table2 that relate to table1. I want to only display 1 of these entries, (either will do), I just dont want to display all.
Hi we recently depoyed SSRS 2005 on two servers along with our web application.
the extranet setup
IIS Web server (app server) in DMZ linked to database server sat behind our corporate firewall. SSL installed on IIS server. SSRS app is on the IIS, with its db on the main database server behind corproate firewall.
we have a simple link going from our app to the reporting services link
however when we enter a login (incl admin) it fails with the message 'The remote name could not be resolved: "ourdomain.com"
Hi, I am pretty new to harcore ASP.NET and .NET in general but I know the basics of the language and stuff like that. Basically I used to be a hardcore object pascal Delphi developer doing Windows Applications but have now moved to .NET world. The reason I posted this question here is I couldn't find any other specific place to ask so here it goes. To get me started with good programming source and practices I downloaded the ASP.NET TimeTracker Starter Kit and after some modificaion in connection string (using SQL 2005 Developer edition not the Express one) I have managed to make it work. Things done in there are pretty interesting way by using a delegate to retrieve data and present it using databound controls. As much simple as it sounds I am more of a fan of not using too many databound controls except in dropdown box, list box and stuff like that. So basically I need to develop DataAccessLayer (DAL) in such a way that it's useful for both Windows and Web application. So with my research I found that I should be using DataSets in the DAL because they are serializable and thatz what Web Applications & Services love over using SqlDataReader. Other advantage of using DataSet is to use ForEach syntex over While Loop in SqlDataReaders. So below is some code I extracted from the TimeTracker Starter Kit to get me started. I also noticed that the return result is a list array of certain object, in this case Category. So does it mean that it can be used in frontend using ForEach syntex? How can I convert the code below to use DataSets over SqlDataReader? Private Delegate Sub TGenerateListFromReader(Of T)(ByVal returnData As SqlDataReader, ByRef tempList As List(Of T))
Public Overrides Function GetAllCategories() As List(Of Category) Dim sqlCmd As SqlCommand = New SqlCommand() SetCommandType(sqlCmd, CommandType.StoredProcedure, SP_CATEGORY_GETALLCATEGORIES)
Dim categoryList As New List(Of Category)() TExecuteReaderCmd(Of Category)(sqlCmd, AddressOf TGenerateCategoryListFromReader(Of Category), categoryList)
Return categoryList End Function
Public Overrides Function GetCategoryByCategoryId(ByVal Id As Integer) As Category If Id <= DefaultValues.GetCategoryIdMinValue() Then Throw New ArgumentOutOfRangeException("Id") End If
Dim sqlCmd As SqlCommand = New SqlCommand() AddParamToSQLCmd(sqlCmd, "@CategoryId", SqlDbType.Int, 0, ParameterDirection.Input, Id) SetCommandType(sqlCmd, CommandType.StoredProcedure, SP_CATEGORY_GETCATEGORYBYID)
Dim categoryList As New List(Of Category)() TExecuteReaderCmd(Of Category)(sqlCmd, AddressOf TGenerateCategoryListFromReader(Of Category), categoryList)
If categoryList.Count > 0 Then Return categoryList(0) Else Return Nothing End If End Function
Private Sub TGenerateCategoryListFromReader(Of T)(ByVal returnData As SqlDataReader, ByRef categoryList As List(Of Category)) Do While returnData.Read()
Dim actualDuration As Decimal = 0 If Not returnData("CategoryActualDuration") Is DBNull.Value Then actualDuration = Convert.ToDecimal(returnData("CategoryActualDuration")) End If
Dim category As Category = New Category(CStr(returnData("CategoryAbbreviation")), actualDuration, _ CInt(returnData("CategoryId")), CDec(returnData("CategoryEstimateDuration")), CStr(returnData("CategoryName")), _ CInt(returnData("ProjectId"))) categoryList.Add(category) Loop End Sub Hope this makes sense. Sorry if I have posted this in a wrong section..! Cheers,Nirav
Ultimately I want to be able to filter every field that is listed. However, for now I am just learning this stuff and would like to just filter the by the name in the "offense" field.
However, it is not binding the selection thus not filtering it out. Do you see any problems in my code?
SELECT dbo.Job.CompanyJobId, dbo.Item.UnitOfMeasure, dbo.Job.Name, dbo.Job.ChangeDate, dbo.Region.CompanyRegionID, dbo.Job.Active, sum(case dbo.SourceType.CompanySourceTypeId WHEN 'MA' then dbo.ProductionEvent.AlternateQuantity ELSE 0 END) AS material, sum(case dbo.SourceType.CompanySourceTypeId WHEN 'PR' THEN dbo.ProductionEvent.Quantity ELSE 0 END) AS production
FROM dbo.job inner join dbo.Event ON dbo.Job.JobGuid = dbo.Event.JobGuid inner join dbo.ProductionEvent on dbo.Event.EventGuid = dbo.ProductionEvent.EventGuid left outer join dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid left outer JOIN dbo.Item ON dbo.Event.ItemGuid = dbo.Item.ItemGuid inner JOIN dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid inner JOIN dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid left OUTER JOIN dbo.Region ON dbo.Job.RegionGuid = dbo.Region.RegionGuid
WHERE dbo.Job.CompanyJobId = 3505048 and dbo.Item.UnitOfMeasure = 'TN' and(dbo.SourceType.CompanySourceTypeId = 'PR' or dbo.SourceType.CompanySourceTypeId = 'MA')
GROUP BY dbo.Job.CompanyJobId, fMeasure, dbo.Region.CompanyRegionID, dbo.Job.Name, dbo.Job.ChangeDate, dbo.Job.Active
Now I need to inser another join like this:
dbo.Event ON dbo.EmployeeLaborEvent.EventGuid = dbo.Event.EventGuid INNER JOIN
and I get error:
Server: Msg 1013, Level 15, State 1, Line 15 Tables or functions 'dbo.Event' and 'dbo.Event' have the same exposed names. Use correlation names to distinguish them.
I am reading over a job description and I am unsure of that the employer is refering to when they say "Instance Parameters".
Here is the context that it is used in. * Tune and optimize SQL statements, Instance Parameters, and Data Storage including the identification of performance related issues.
You can't have but one default contraint in a DB named df_revisiondate Default getdate()
I thought that sense they were being created on different Tables that it would not matter. It was a way to maintain a type of consistency by giving them the same name. However, it SEEMS to have caused all my tables to crash.
Let say i have 3 tables. Let's name it Main, table2, table3. in table Main, there are 4 colums(M_id,M_name M_tbl2, M_tbl3). In table2 and table3, each has 3 colums. For table2 the colums are id, tbl2Name, tbl2Desc and for table3(id, tbl3Name, tbl3Desc).
M_tbl2 will refer to id in table2 and M_tbl3 will refer to id in table3. How am i going to get M_id, M_name, tbl2Name, tbl3Name in one query?
I am creating a view in SQL using the View tab in the database and adding the table and the fields I need. For criteria I need to have 28 'or' s . How do I insert more columns on the end of my view ?
I have test tables with key fields that increment by one each time a record is added. If I delete all the records in a table (using a delete query) is there a way I can make the key start at 1 again.
The reason I ask is that by using test data in these tables (and there are a lot of records),when I clear them out and append the live data the key field starts at something like 764525
Sorry if this sounds dumb but I can't find the answer . I have created a scheduled job on my test database using the wizard. How do I edit it or delete it ? Step by step instructions please
I have never done this before so am just experimenting at the moment.
I have a sp that selects from a table. The table has a MA record (received qty) type and a PR record (used qty) type.
Below is code that produces an extract and gives 2 records, one for MA (received qty) and one for PR (used qty).
SELECT dbo.Batch.ReportDate AS job_date, dbo.Job.CompanyJobId AS job_number, dbo.Item.CompanyItemId AS cost_code, dbo.Product.CompanyProductId as product_id, SUBSTRING(dbo.Job.CompanyJobId, 1,3) as plant_id, dbo.SourceType.CompanySourceTypeId, CASE dbo.SourceType.CompanySourceTypeId WHEN 'PR' then SUM(dbo.ProductionEvent.Quantity) ELSE SUM(dbo.ProductionEvent.AlternateQuantity) END AS tot_qty FROM dbo.Batch INNER JOIN dbo.Event ON dbo.Batch.BatchGuid = dbo.Event.BatchGuid INNER JOIN dbo.Job ON dbo.Event.JobGuid = dbo.Job.JobGuid INNER JOIN dbo.ProductionEvent ON dbo.Event.EventGuid = dbo.ProductionEvent.EventGuid INNER JOIN dbo.Item ON dbo.Event.ItemGuid = dbo.Item.ItemGuid INNER JOIN dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid INNER JOIN dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid LEFT OUTER JOIN dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid WHERE dbo.SourceType.CompanySourceTypeId = 'PR' and substring(dbo.Product.CompanyProductId, 1, 4) = 'ASPH' and dbo.Item.UnitOfMeasure = 'TN'
or dbo.SourceType.CompanySourceTypeId = 'MA' and substring(dbo.Product.CompanyProductId, 1, 4) = 'ASPH' and dbo.Item.UnitOfMeasure = 'TN'
GROUP BY dbo.Batch.ReportDate, dbo.Job.CompanyJobId, dbo.Item.CompanyItemId, dbo.SourceType.CompanySourceTypeId, dbo.Product.CompanyProductId
Tot Qty 2007-12-17 3006204 05001 ASPH - SP 9.5 C 300 MA372.25 2007-12-17 3006204 05001 ASPH - SP 9.5 C 300 PR357.25
Now I want to extract the same data into a temp table (that I have created) and when reading the same records I would like to update either a received qty field or a used qty field depending upon record type MA or PR). The query works but both qty fields are empty. Can anyone see what I am doing wrong?
SELECT dbo.Batch.ReportDate AS job_date, dbo.Job.CompanyJobId AS job_number, dbo.Item.CompanyItemId AS cost_code, dbo.Product.CompanyProductId as product_id, SUBSTRING(dbo.Job.CompanyJobId, 1,3) as plant_id, dbo.SourceType.CompanySourceTypeId, qty_received = CASE dbo.SourceType.CompanySourceTypeId WHEN 'MA' then SUM(dbo.ProductionEvent.Quantity) ELSE 0 END, qty_used = CASE dbo.SourceType.CompanySourceTypeId WHEN 'PR' THEN SUM(dbo.ProductionEvent.AlternateQuantity) ELSE 0 END, qty_wasted = CASE dbo.SourceType.CompanySourceTypeId WHEN 'MA' then SUM(dbo.ProductionEvent.Quantity) ELSE 0 END - CASE dbo.SourceType.CompanySourceTypeId WHEN 'PR' THEN SUM(dbo.ProductionEvent.AlternateQuantity) ELSE 0 END FROM dbo.Batch INNER JOIN dbo.Event ON dbo.Batch.BatchGuid = dbo.Event.BatchGuid INNER JOIN dbo.Job ON dbo.Event.JobGuid = dbo.Job.JobGuid INNER JOIN dbo.ProductionEvent ON dbo.Event.EventGuid = dbo.ProductionEvent.EventGuid INNER JOIN dbo.Item ON dbo.Event.ItemGuid = dbo.Item.ItemGuid INNER JOIN dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid INNER JOIN dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid LEFT OUTER JOIN dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid WHERE dbo.SourceType.CompanySourceTypeId = 'PR' and substring(dbo.Product.CompanyProductId, 1, 4) = 'ASPH' and dbo.Item.UnitOfMeasure = 'TN'
or dbo.SourceType.CompanySourceTypeId = 'MA' and substring(dbo.Product.CompanyProductId, 1, 4) = 'ASPH' and dbo.Item.UnitOfMeasure = 'TN'
GROUP BY dbo.Batch.ReportDate, dbo.Job.CompanyJobId, dbo.Item.CompanyItemId, dbo.SourceType.CompanySourceTypeId, dbo.Product.CompanyProductId
QTY QTY QTY REC USED WASTE 2007-12-17 3006204 05001 ASPH - SP 9.5 C 300 MA.00 .00 .00 2007-12-17 3006204 05001 ASPH - SP 9.5 C 300 PR.00 .00 .00
ARRRRRRRGGGGGHHHHH!!Please can you help, I'm going round the bend with this.I have a simple and small table called STOCKCATS, which I need to query toget back a dataset in a particular order, but although it looks simple Ican't get it to work. My table schema plus sample data to see the problemis as follows:DROP TABLE IF EXISTS `STOCKCATS`;CREATE TABLE `STOCKCATS` (`CATID` varchar(30) NOT NULL default '',`LEVEL` varchar(30) default NULL,PRIMARY KEY (`CATID`),KEY `indxCATEGORYID` (`CATID`));INSERT INTO `STOCKCATS` (`CATID`,`LEVEL`) VALUES('A001',''),('A002','A001'),('A003','A001'),('A004','A001'),('A005','A001'),('PCHW01',''),('MHW01',''),('FD01',''),('ELEC01',''),('MHW02','MHW01');INSERT INTO `STOCKCATS` (`CATID`,`LEVEL`) VALUES('MHW03','MHW01'),('MHW04','MHW01'),('MHW05','MHW01'),('PCHW02','PCHW01'),('PCHW03','PCHW01'),('PCHW04','PCHW01'),('PCHW05','PCHW01'),('PCSW01',''),('MSW01',''),('C001',''),('C002','C001'),('C003','C001'),('MV',''),('SUZ','MV'),('ALF','MV'),('PLASMA','ELEC01'),('T01','ELEC01'),('HEATING',''),('RAD','HEATING'),('P01',''),('B01','P01'),('BB','HEATING'),('FS','HEATING'),('WM','HEATING'),('AEROSOL',''),('SOLVENTS','AEROSOL'),('DGC','');INSERT INTO `STOCKCATS` (`CATID`,`LEVEL`) VALUES('DGXWINDOWS','DGC'),('DGXEXTRA','DGC'),('DGXCON','DGC');As you can see from the table structure, this table consists of 2 fieldvalues. The 1st is the category code and the 2nd is the level is at. If acatid has a level of nothing, eg '', then it means that it is a root levelcategory. If a catid has a another cat's catid in it's level, eg B01 hasP01, then it is a sub-category of this category, eg B01 is a sub-cat of P01.All I want to do is query this table and bring back the data so thatalphabetically it goes root level cat A1, then all the sub-cats for thisroot level, then root level A2, then all sub-cats for this root level and soon. An example using the above would be as follows:^ ^ A to G of root level cats plus their sub-cats....HEATING << root levelBB << sub-cat of heatingFS << sub-cat of heatingWM << sub-cat of heating/ / I to Z of root level cats plus their sub-cats....A few posters kindly gave me a solution of ORDER BY COALESCE(CATID,LEVEL),CATID and I thought this had done it, but I was looking at the ('A001',''),('A002','A001'), ('A003','A001'), ('A004','A001'), ('A005','A001')entries as these naturally fell into place. If you use this order commandon the above you will see that ('P01','') and it's associated ('B01','P01')sub-cat just don't come together.Does any body have any ideas?ThanksLaphan
I have a select statement like this. Notice that I am doing the same calculation on different fields. Is it possible I can make this, in coding terms, a fucntion; so I can call it when I like (this query) and just provide the field.
Example: select field1, test_field = secs_to_hhmmss(TALK_TIME) from ...
SELECT dbo.date_table.real_date, dbo.time_table.hh, COUNT(dbo.CALLDETAIL.id) as NumOfCalls, TalkTime = CASE WHEN CAST(SUM(TALK_TIME) AS INTEGER)/3600<10 THEN '0' ELSE '' END + RTRIM(CAST(SUM(TALK_TIME) AS INTEGER)/3600) + ':' + RIGHT('0'+RTRIM((CAST(SUM(TALK_TIME) AS INTEGER) % 3600) / 60),2) + ':' + RIGHT('0'+RTRIM((CAST(SUM(TALK_TIME) AS INTEGER) % 3600) % 60),2), HoldTime = CASE WHEN CAST(SUM(HOLD_TIME) AS INTEGER)/3600<10 THEN '0' ELSE '' END + RTRIM(CAST(SUM(HOLD_TIME) AS INTEGER)/3600) + ':' + RIGHT('0'+RTRIM((CAST(SUM(HOLD_TIME) AS INTEGER) % 3600) / 60),2) + ':' + RIGHT('0'+RTRIM((CAST(SUM(HOLD_TIME) AS INTEGER) % 3600) % 60),2),
I am trying to combine 2 queries, each with their own 'order by' and I am having trouble.
This is just an example, not what I'm trying to do, my query is more elaberate but looks simular to this.
SELECT TOP 10 *, 'FieldA' AS SortedBy FROM TableA Order By FieldA Desc UNION ALL SELECT TOP 10 Precent *, 'FieldB' AS SortedBy FROM TableA Order By FieldB Asc
Anyway not to get the following error? Server: Msg 156, Level 15, State 1, Line 34 Incorrect syntax near the keyword 'UNION'.
I have a SQL table where most of the fields are numeric. I have tried to run a query in Access to either make a new Access table or insert the records into an empty Access table. However, it changes some of the numeric fields to text fields. Also if I view the design of the SQL table in Access some of the numeric fields appear as text. If I view it in SQL they are numeric. It is a linked table in the Access database.
I'm attempting to move data from a text field to a numeric field, but I need to be able to remove any non-numeric characters in that field first, but I do not want to lose the numeric data.
In the code below, the Value table is the table that will be converted.
INSERT INTO IntegerValues (FK_ReferenceID,FK_ReferenceType,FK_FieldID,FieldProperty,Value,CreationDate,CreatedBy,Revision) SELECT FK_ReferenceID,FK_ReferenceType,FK_FieldID,FieldProperty,Value,CreationDate,CreatedBy,Revision FROM StringValues WHERE FK_FieldID in (select id from ##tmpFields)
Still new to SQL and having fun learning it. Here's my latest question.
I have a table 'Fields' that has a column named 'label'. In label, I have values like 'Total Number of Orders' I want to replace the text Number with a #. How can I do that for all records that contain 'Number'?
hi, how can I use stored proc to delete all rows from a table (table1) and insert new ones. for instance. my query is: ------------------------------------- select field1, two, three from table1 innerjoin table2 on etc... where condition1 and condition2 ------------------------------------- I want to place the result in my table (table1) and everything I run the stored pro I want to delete the content and place the new dataset in the table1?
I hope I'm clear what I'm trying to do. thank you very much in advance. P.S please be detailed when explaining.
I have had a new PC and have installed SQL Server. However, I do not seem to have anywhere to create databases on my PC. I did on my old one. How can i do this ?
Not sure how I did this, but I dropped a table and it still shows up in sysobjects. This breaks a job that rebuilds indexes because the table doesn't exist. I tried recreating and dropping the table, but the extra entry is still there. Would it be okay to just delete the row from sysobjects? This has happened in a 2000 and 2005 db at the same time.
I have a sp like this. The ttl_qty is the current sum variable.
CASE dbo.SourceType.CompanySourceTypeId WHEN 'PR' then SUM(dbo.ProductionEvent.Quantity) ELSE SUM(dbo.ProductionEvent.AlternateQuantity) END AS ttl_qty, dbo.SourceType.CompanySourceTypeId,
I need to split the sum into separate variables, so when a 'PR' I need to add sum to a ttl_qty1 variable otherwise I need to add sum to a ttl_qty2 variable. How can I do this?
Help! I need to write a SQL statement to INSERT a record into an Access table, which has an Autonumber field as its primary key. Sadly, many of the fieldnames contain one or more spaces in the name (eg. "field name").
When I try to write the insert statement with the fieldnames specified like this: INSERT INTO tblOne ( fieldname1, fieldname2, field name 3 ) VALUES ( value1, value2, value3 ) the spaces in the last fieldname cause a problem.
When I try encasing the problem fieldname in brackets, like this: INSERT INTO tblOne ( fieldname1, fieldname2, [field name 3] ) VALUES ( value1, value2, value3 ) SQL thinks I want to be prompted for a value.
When I try to use the fully-qualified name in the insert statement like this: INSERT INTO tblOne ( fieldname1, fieldname2, tblOne.[fieldname 3] ) VALUES ( value1, value2, value3 ) I get a SQL syntax error.
Then I tried doing the insert without spelling out the fieldnames at all, like this: INSERT INTO tblOne VALUES ( value1, value2, value3 ) but I am required to provide a value for every field, including the autonumber field, which defeats the purpose of the autonumber.
I like to display the records for AccountNo = 221 from table records shown below, how would I do this? I am display this results in a crystal report. What is sql statement to do this? Thanks.
Sql Statement: (this statement is not allowed) Select AccountNo, RecordID, (Select Description From Table1 Where RecordID In (Select RecordID From Table2 Where Date < '04/05/2006')) As Description, Amount From Table2 Where Date < '04/05/2006'
Desired Result:
AccountNo RecordID Description Amount 221 20 Whew 290.00 221 21 Hi There Good Morning 728.00
Table 1
RecordID Description 20 Whew 21 Hi 21 There 21 Good Morning
I have a sp that I need to modify and having some syntax issues: Here is my script:
SELECT dbo.Batch.ReportDate AS job_date, dbo.Job.CompanyJobId AS job_number, dbo.Item.CompanyItemId AS cost_code,
SUM(CASE dbo.SourceType.CompanySourceTypeId WHEN 'MA' then dbo.ProductionEvent.AlternateQuantity ELSE 0 END) AS qty_received, SUM(CASE dbo.SourceType.CompanySourceTypeId WHEN 'PR' THEN dbo.ProductionEvent.Quantity ELSE 0 END) AS qty_used, SUM(CASE dbo.SourceType.CompanySourceTypeId WHEN 'MA' then dbo.ProductionEvent.AlternateQuantity ELSE 0 END) - SUM(CASE dbo.SourceType.CompanySourceTypeId WHEN 'PR' THEN dbo.ProductionEvent.Quantity ELSE 0 END) AS qty_wasted, SUBSTRING(dbo.Job.CompanyJobId, 1 ,3) AS plant_id
FROM dbo.Batch INNER JOIN dbo.Event ON dbo.Batch.BatchGuid = dbo.Event.BatchGuid INNER JOIN dbo.Job ON dbo.Event.JobGuid = dbo.Job.JobGuid INNER JOIN dbo.ProductionEvent ON dbo.Event.EventGuid = dbo.ProductionEvent.EventGuid INNER JOIN dbo.Item ON dbo.Event.ItemGuid = dbo.Item.ItemGuid INNER JOIN dbo.Source ON dbo.ProductionEvent.SourceGuid = dbo.Source.SourceGuid INNER JOIN dbo.SourceType ON dbo.Source.SourceTypeGuid = dbo.SourceType.SourceTypeGuid left outer JOIN dbo.Product ON dbo.ProductionEvent.ProductGuid = dbo.Product.ProductGuid
WHERE dbo.Item.UnitOfMeasure = 'TN' and dbo.Batch.ReportDate >= @DateFrom and dbo.Batch.ReportDate <= @DateTo
GROUP BY dbo.Batch.ReportDate, dbo.Job.CompanyJobId,dbo.Item.CompanyItemId
Now I need to modify this line:
SUM(CASE dbo.SourceType.CompanySourceTypeId WHEN 'MA' then dbo.ProductionEvent.AlternateQuantity ELSE 0 END) AS qty_received
to include:
and dbo.Product.CompanyProductId LIKE 'ASPH%'
New line should be:
SUM(CASE dbo.SourceType.CompanySourceTypeId WHEN 'MA' and dbo.Product.CompanyProductId when LIKE 'ASPH%'then dbo.ProductionEvent.AlternateQuantity ELSE 0 END) AS qty_received,
I get error saying: Incorrect syntax near the keyword 'and'.
