"Warning: Null value is eliminated by an aggregate or other SET operation."
i keep having this message while having some joint statement.
is there a way to prevent this or even hide this message?
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
I use VB 6.0 with ADO 2.6 to access an SQL-server.
I know that the table I wish to create generates this warning.
But from today ( without any changes to the SQL-server ) , this warning is reported as an error to the client instead of continuing.
So my error trap routine traps this as an error now.
I have a workaround that I would to avoid and that's reinstalling the SQL-server ( Only the MSSQL ).
Does anybody know a better solution.
PS : Changing the table structure is not possible in this case.
Thnx in advance,
Sven Peeters
Belgium
Hi,I have a few create table statements which create temporary tablesthat has row definitions which exceeds the 8060 size limit, this causesa warning message being generated (Message 1708).Is there a way I can disable/avoid the warning message from beingprinted ?Thanks,joe
View 2 Replies View RelatedHi
Can anyone tell me what this warning message in the Quotes below...
I get this on one of our servers every 15 minutes in the event Viewer..
Here is the message in the event Viewer..
"Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."
Thanks All,
Venu
We are seeing the following error message in our SQL logs and was hoping for some advice.
"Warning: the available page file space has dropped below 4 MB"
To fix the problem we thought we should increase our paging file size for our virtual memory on the server. The recommended allocation was 3083 MB and previously we were using less than the recommended amount so we allocated 7167 MB (the max we were allowed). Do you see any problems with this or have any recommendations?
I'm getting the following error message
[rsNonAggregateInMatrixCell] The Value expression for the textbox €˜IMAGE_TOTAL_1€™ references a field outside an aggregate function. Value expressions in matrix cells should be aggregates, to allow for subtotaling.
the cell it is refering to is in the data area of a matrix.
The value expression is =sum(Fields!IMAGE_TOTAL.Value,"MAIN")
this cell also has a navigation set to "job to a report"
When i take out the navigation the warning messages go away.
Is there an issue with using navigation link on a textbox with an aggregate in it?
ps - everything runs fine I just get a warning message.
sorry for posting a question that has probably been posted hundreds oftimes, but i can't seem to find the answer i need...We're using a SqlServer 7.0 database and recently started getting timeout expirederrors on our views, which i'm assuming is due to the volume ofrecords in our tables. Unfortunately i'm not too experiences w/indexing tables, so my question is:1) how do you determine which fields to index (does it have to be afield w/ no nulls, no duplicates..similar to primary key), and why notindex the primary key2) is it better to index the same field on different tables, or is ita better design to index a different field for each table (ex. do youwant to index the same field that you link the different tables with,or do you want to avoid doing this)3) can somebody explain the concept of creating a clustered index4) once table is indexed, if there are users accessing the linkedtables via Access, do they have to re-link the tables?sorry for the number of questions and what may appear to be simplequestions to most, but again, i'm pretty unfamiliar w/ indexing andwould really appreciate any help...thanks
View 1 Replies View RelatedAny way to hide the reporting services error message??? Please help me out to solve this problem
How do I prevent SQL Server 2000 from posting successful backupcompletion messages to the Windows 2000 Application Event Log?I have scheduled jobs which backup my transaction logs on 50+ databasesand it always writes to the Windows 2000 application event log uponcompletion.Due to the frequency of the jobs it only takes a day for theApplication Log to fill up, which is causing other jobs to get hung upwhen trying to write to it. On my Windows 2000 server, I have theapplication log event viewer setting correctly set as:"When maximum log size is reached - Overwrite events as needed" but forsome reason this setting no longer applies like it did for the pastthree years. SQLServerAgent and MSSQLSERVER both run under a localAdmin account, without a domain.When I researched how prevent SQL Server from logging this type ofmessage, I found that I can use sp_update_alert to disable thismessage, but I cannot findthe message_id to correctly disable this message. In sysmessages, themessage I am trying to suppress iserror:18265severity:10dlevel:128description:Log backed up: Database:%1, creation date(time): %2(%3), first LSN: %4, last LSN: %5, number ofdump devices: %7!d!, device information: (%8).mslangid:1033I tried calling sp_update_alert as follows:exec sp_update_alert @name = 'Log backed up: Database: %1, creationdate(time): %2(%3), first LSN: %4, last LSN: %5, number of dumpdevices: %7!d!, device information: (%8).', @enabled = 0but got the error message:Server: Msg 14262, Level 16, State 1, Procedure sp_update_alert, Line105The specified @name ('Log backed up: Database: %1, creation date(time):%2(%3), first LSN: %4, last LSN: %5, number of dump devices: %7!d!,device inf') does not exist.Looks like it can only handle 128 characters.How can I disable this message from being logged in the ApplicationLog? Or alternatively, how can I get the event viewer to behave asexpected and"Overwrite events as needed"?Thanks,Mike Orlando
View 9 Replies View Related
Hi there,
I have only this warning message during the System Configuration Check:
ASP.Net Version Registration Requirement (Warning)
Messages
ASP.Net Version Registration Requirement
64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Does this mean that I can't install Reporting Services or should I pay no attention to it and continue to install?
I'm running on Windows 64-bit Pro. edition.
Thanks,
Eric
I'm using Outlook 2010
My goal: I want to hide some text or table from inside the email message body. I don't want to attach a file with a table neither I want copy/paste it. I'd like to put that Excel table inside the message but the table is quite big.
Before I used Lotus Notes and it had the option to fold of hide some text from user. User could open when it wants but it will not take the space.
How to solve the problem of Warning message 'Fail Components' and 'redirect row' when doing text mining?
thanks
While intalling SQL 2005 on an x64 machine, I got an error message that warned that some functions of SQL would not install unless IIS was installed (and enabled) on the machine. It did not say what would not install, but I gather it is Reporting Services. I don't recall getting these warnings in previous (32 bit) installations of SQL 2005.
On the other hand, when I go into the BI Intelligence Studio on
a (32 bit) server that does not have IIS, I seem to be able to create
a report anyway (Not really my area of expertise ). Does that mean that Report Services is working without IIS?
Hello everyone. I'm installing SQL 2005 on Windows Server 2008. During the first leg of the installation, I get green checks on all items except for "ASP.net version Registration requirement". My error message says" Failed to find ASP.Net Registration with Microsoft (IIS). I've run the aspnet_regiis program, but it didn't seem to do anything. Is there a certain switch I need to use with the the aspnet_regiis command? It appears that the ASP.Net registration is hindering me from installing the reporting services component in SQL, which I need to install CRM4.0. So, if anyone knows how to help me do this ASP.NET registration on a Windows Server 2008 server, I would be very grateful.
Thanks
For MSSQL 2005, how do you hide the databases so mssql db user will not see the database that he does not have access to when he logs in?
I can't seem to figure this out. I want to use this approach to increase the login time (to reduce loading speed on the database list).
Thank you Thank you...
I would like to know if it's possible to embed a SQL Server 2000/2005 DBwithin a desktop application so that the end users cannot view the DB.Also, this will prevent them from copying the database on to their otherSQL Servers.Also, what are the options to load SQL Server 2005 on Win 98*** Sent via Developersdex http://www.developersdex.com ***
View 2 Replies View Related- COM Plus Catalog Requirement (Warning)
Messages
COM Plus Catalog Requirement
If SQL Server Setup fails, Setup will roll back the installation but may not remove all .manifest files. The workaround is to rename the files and then rerun Setup. For more information, see How to: Work Around COM+ Check Failure in SQL Server Setup.
Workaround says remove the .manifest files. Where are they?
SETUP CONTINUES TO FAIL
I've tried to installed sql server 2005 developer edition on windows vista home premium but failed many times, almost giving up.
I've installed and turned on all the features of IIS 7.0 but it still failed and I tried to test IIS 7 by running the local host and received this error " HTTP Error 500.0 - Internal Server Error."
I even ran the windows update SP1 for Vista and MDAC 2.8 SP1
I really appreciate any comments and help.
-----
Here are the messages in the windows system check for the sql server 2005 installation:
IIS Feature Requirement (Warning)
Messages
€¢ IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
I've tried to installed sql server 2005 developer edition on windows vista home premium but failed many times, almost giving up.
I've installed and turned on all the features of IIS 7.0 but it still failed and I tried to test IIS 7 by running the local host and received this error " HTTP Error 500.0 - Internal Server Error."
I even ran the windows update SP1 for Vista and MDAC 2.8 SP1
I really appreciate any comments and help.
-----
Here are the messages in the windows system check for the sql server 2005 installation:
IIS Feature Requirement (Warning)
Messages
€¢ IIS Feature Requirement
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
While waiting for the fax of instructions to contact MS Support, I thought I would post here (tried several times and no fax...)
We get this message in the log file and then all hell breaks loose until it resets memory. The SQL Service continues working but nobody can connect for about 5 minutes and then is seems to reset itself. This has happened three times over the past two weeks. Only one time it did create the SQLDUMP files but all three occurences have practically the same entries.
We are running SQL Server 2005 x64 SP2 under Windows 2003 x64 SP1. We have 4GB RAM and SQL is configured to use 2GB of it. We have a large number of databases (about 400) on this one instance that experiences this problem. The server itself is not under a tremendous load. All of the databases were recently upgraded from SQL 2000 SP4 32 bit instance. The first occurence happened just days after the migration.
----- Log Entries -----
LazyWriter: warning, no free buffers found.
2007-06-14 14:15:56.18 spid3s
Memory Manager
VM Reserved = 4415288 KB
VM Committed = 4398048 KB
AWE Allocated = 0 KB
Reserved Memory = 1024 KB
Reserved Memory In Use = 0 KB
2007-06-14 14:15:56.18 spid3s
Memory node Id = 0
VM Reserved = 4409528 KB
VM Committed = 4392376 KB
AWE Allocated = 0 KB
SinglePage Allocator = 1951840 KB
MultiPage Allocator = 81680 KB
2007-06-14 14:15:56.18 spid3s
MEMORYCLERK_SQLGENERAL (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 39264 KB
MultiPage Allocator = 21944 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLBUFFERPOOL (Total)
VM Reserved = 4214784 KB
VM Committed = 4198400 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 0 KB
MultiPage Allocator = 8 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLQUERYEXEC (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 264 KB
MultiPage Allocator = 104 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLOPTIMIZER (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 26816 KB
MultiPage Allocator = 96 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLUTILITIES (Total)
VM Reserved = 120 KB
VM Committed = 120 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 4728 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLSTORENG (Total)
VM Reserved = 96768 KB
VM Committed = 96768 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 62192 KB
MultiPage Allocator = 27624 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLCONNECTIONPOOL (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 4392 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLCLR (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLSERVICEBROKER (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 624 KB
MultiPage Allocator = 320 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLHTTP (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SNI (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 568 KB
MultiPage Allocator = 16 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_FULLTEXT (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 16 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLXP (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 16 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_BHF (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 336 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLQERESERVATIONS (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8192 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_HOST (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 24 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SOSNODE (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 42376 KB
MultiPage Allocator = 27392 KB
2007-06-14 14:15:56.20 spid3s
MEMORYCLERK_SQLSERVICEBROKERTRANSPORT (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 48 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_OBJCP (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 352016 KB
MultiPage Allocator = 432 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_SQLCP (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 953192 KB
MultiPage Allocator = 3088 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_PHDR (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 308728 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_XPROC (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 56 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_TEMPTABLES (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 128 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_NOTIF (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 16 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_VIEWDEFINITIONS (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 16 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_XMLDBTYPE (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_XMLDBELEMENT (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_XMLDBATTRIBUTE (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_STACKFRAMES (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 0 KB
MultiPage Allocator = 8 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_BROKERTBLACS (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 96 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_BROKERKEK (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_BROKERDSH (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_BROKERUSERCERTLOOKUP (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_BROKERRSB (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_BROKERREADONLY (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 32 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_BROKERTO (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 8 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_EVENTS (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 16 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
CACHESTORE_SYSTEMROWSET (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 43744 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
USERSTORE_SCHEMAMGR (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 30632 KB
MultiPage Allocator = 16 KB
2007-06-14 14:15:56.20 spid3s
USERSTORE_DBMETADATA (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 39856 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
USERSTORE_TOKENPERM (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 14536 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
USERSTORE_OBJPERM (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 14904 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
USERSTORE_SXC (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 936 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
OBJECTSTORE_LBSS (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 64 KB
MultiPage Allocator = 400 KB
2007-06-14 14:15:56.20 spid3s
OBJECTSTORE_SNI_PACKET (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 6584 KB
MultiPage Allocator = 48 KB
2007-06-14 14:15:56.20 spid3s
OBJECTSTORE_SERVICE_BROKER (Total)
VM Reserved = 0 KB
VM Committed = 0 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 272 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.20 spid3s
OBJECTSTORE_LOCK_MANAGER (Total)
VM Reserved = 8192 KB
VM Committed = 8192 KB
AWE Allocated = 0 KB
SM Reserved = 0 KB
SM Committed = 0 KB
SinglePage Allocator = 4232 KB
MultiPage Allocator = 0 KB
2007-06-14 14:15:56.21 spid3s Buffer Distribution: Stolen=22764 Free=0 Cached=221235
Database (clean)=268686 Database (dirty)=3406
I/O=0, Latched=5
2007-06-14 14:15:56.21 spid3s Buffer Counts: Committed=516096 Target=523990 Hashed=272097
Internal Reservation=104798 External Reservation=1022
Stolen Potential=252769
Min Free=128 Visible=523990
Available Paging File=4634734592
2007-06-14 14:15:56.21 spid3s Procedure Cache: TotalProcs=11768 TotalPages=202189 InUsePages=950
2007-06-14 14:15:56.21 spid3s Process physical/virtual memory pressure: 0/0 System physical memory pressure: 0
2007-06-14 14:15:56.23 spid3s Global Memory Objects:
Resource= 2880
Locks= 532
SE Schema Mgr= 3653
SQLCache= 1622
Replication= 3
ServerGlobal= 49
XPGlobal= 2
Xact= 165
SETLS= 4
DatasetMemObjs= 8
SubpDescPmos= 4
SortTables= 2
2007-06-14 14:15:56.23 spid3s Query Memory Objects: Grants=8 Waiting=0 Maximum=226034 Available=225010 Limit=226048
2007-06-14 14:15:56.23 spid3s Query Memory Objects: Next Request=0 Waiting For=0 Cost=0 Timeout=0 Wait Time=0 Last Target=237945
2007-06-14 14:15:56.23 spid3s Small Query Memory Objects: Grants=0 Waiting=0 Maximum=11895 Available=11895 Limit=11895
2007-06-14 14:15:56.24 spid3s
Optimization Queue
Overall Memory = 3440517120 Target Memory = 1485357056 Last Notification = GROW Timeout = 6 Early Termination Factor = 5
2007-06-14 14:15:56.24 spid3s
Small Gateway
Configured Units = 16 Available Units = 16 Acquires = 0
Waiters = 0 Threshold Factor = 380000 Threshold = 380000
2007-06-14 14:15:56.24 spid3s
Medium Gateway
Configured Units = 4 Available Units = 4 Acquires = 0
Waiters = 0 Threshold Factor = 12 Threshold = -1
2007-06-14 14:15:56.24 spid3s
Big Gateway
Configured Units = 1 Available Units = 1 Acquires = 0
Waiters = 0 Threshold Factor = 8 Threshold = -1
2007-06-14 14:15:56.24 spid3s
MEMORYBROKER_FOR_CACHE
Allocations = 221239
Rate = 0
Target Allocations = 379816
Future Allocations = 0
Last Notification = GROW
2007-06-14 14:15:56.24 spid3s
MEMORYBROKER_FOR_STEAL
Allocations = 22741
Rate = 0
Target Allocations = 181318
Future Allocations = 0
Last Notification = GROW
2007-06-14 14:15:56.24 spid3s
MEMORYBROKER_FOR_RESERVE
Allocations = 1024
Rate = 0
Target Allocations = 253810
Future Allocations = 95233
Last Notification = GROW
2007-06-14 14:39:56.82 Server Resource Monitor (0x1180) Worker 0x000000008000C1C0 appears to be non-yielding on Node 0. Memory freed: 148160 KB. Approx CPU Used: kernel 125 ms, user 62 ms, Interval: 65000.
2007-06-14 14:40:56.84 Server Resource Monitor (0x1180) Worker 0x000000008000C1C0 appears to be non-yielding on Node 0. Memory freed: 218536 KB. Approx CPU Used: kernel 328 ms, user 93 ms, Interval: 125046.
2007-06-14 14:41:56.84 Server Resource Monitor (0x1180) Worker 0x000000008000C1C0 appears to be non-yielding on Node 0. Memory freed: 288960 KB. Approx CPU Used: kernel 515 ms, user 125 ms, Interval: 185046.
2007-06-14 14:42:56.84 Server Resource Monitor (0x1180) Worker 0x000000008000C1C0 appears to be non-yielding on Node 0. Memory freed: 366008 KB. Approx CPU Used: kernel 718 ms, user 171 ms, Interval: 245046.
2007-06-14 14:43:56.84 Server Resource Monitor (0x1180) Worker 0x000000008000C1C0 appears to be non-yielding on Node 0. Memory freed: 435992 KB. Approx CPU Used: kernel 968 ms, user 296 ms, Interval: 305046.
2007-06-14 14:44:56.84 Server Resource Monitor (0x1180) Worker 0x000000008000C1C0 appears to be non-yielding on Node 0. Memory freed: 505160 KB. Approx CPU Used: kernel 1203 ms, user 390 ms, Interval: 365046.
2007-06-14 14:45:56.84 Server Resource Monitor (0x1180) Worker 0x000000008000C1C0 appears to be non-yielding on Node 0. Memory freed: 572488 KB. Approx CPU Used: kernel 1468 ms, user 468 ms, Interval: 425046.
2007-06-14 14:46:56.84 Server Resource Monitor (0x1180) Worker 0x000000008000C1C0 appears to be non-yielding on Node 0. Memory freed: 639056 KB. Approx CPU Used: kernel 1703 ms, user 500 ms, Interval: 485046.
I am trying to install the client tools for management purposes only on a IBM T42 laptop which meets all the hardware and software requirements listed on MS support including the HCL list, the Readme, the forums and MSDN but the install still shows the following log messages when the install fails.
AdminMessage = Setup requires user to be in the administrator group in order to continue the installation process. Setup is aborting as the current user is not in the administrator group.
(I am an adminsistrator on this machine)
Property(S): SupportedOSMessage = Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation.
Property(S): SupportedProcTypeMessage = This Microsoft SQL Server Native Client package is not supported on the current processor type.
Any help would be appreciated.
I need to set up 1 new user in SQL Server 2005 to be able to read specific tables in a db (db1).
The user will connect from MS access using odbc links (SQL Native client ot SQL Server driver)
I've tried to set up one and once logged on from the user workstation, I can only see sys. tables and INFORMATION_SCHEMA tables.
None of the required db1 tables appear.
under Security/Logins I've created User1:
SQL Server auth. with password
default db = db1
server_roles = none
user mapping = map, db1, user1,dbo
securables = none
status = grant, enabled
on the access db, the odbc link was set up with default db = db1
Why can't I see any of the db1 tables?
How can I restrict access to the sys. tables?
Thank you
COM Plus Catalog Requirement (Warning)
Messages
COM Plus Catalog Requirement
If SQL Server Setup fails, Setup will roll back the installation but may not remove all .manifest files. The workaround is to rename the files and then rerun Setup. For more information, see How to: Work Around COM+ Check Failure in SQL Server Setup.
We have use SQL Server 2005 on 64bit windows 2003 server Cluster.
In the application log I noticed the following errors during .
When error occurred , i was copying the 45 GB backup file from this machine to another Network machine over 1Gbps network link.
The sql server database was used by many user. The SQL resorce probably failed in this failover cluster.We could immediately
restart the group.So what could be the cause of the error? anyone has faced this problem ?. Here are the logs in chronology.
Any recommended remedy / parameter change to prevent this further (of course besides not copying full backup file online.
Normally it's done at night in lean times)
------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:11 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
-------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:11 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] printODBCError: sqlstate = HYT00; native error = 0; message = [Microsoft][SQL Native Client]Query timeout expired
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
-------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:11 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
-------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:11 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
-------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:27 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] checkODBCConnectError: sqlstate = 08001; native error = 102; message = [Microsoft][SQL Native Client]TCP Provider: Timeout error [258].
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
hi
Where can find the Manage SQL Server Message in SQL 2005. Just like the one in Enterprise Manager SQL 2000 under the tools menu? Thanks
It reminds me of the "opearation was successful the patient died" scenario.
Compare this to the SSIS Error message:
The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "myPubs.dtsx" finished: Failure.
Why can't they write meaningful messages?
We are seeing the following in our SQLAgent log every minute. I cannot find any information anywhere about this error message.
[298] SQLServer Error: 599, WRITE: The length of the result exceeds the length limit (2GB) of the target large type. [SQLSTATE 42000] (LogToTableWrite)
I have a need to asynchronously send a short message to an application over
tcp/ip after the user makes a selection from a web browser.
We are developing a reservation system where the availability to users in
close physical proximity is indicated by lights at a kiosk. We want the user
to be able to make a reservation from a web browser over the internet, (which
checks the sql server db for availibility), and when the reservation is made,
the appropriate lights at the kiosk indicate it is unavailable.
I can think of three choices, but am unsure which is best:
1. Poll the server to look for the event. I don't like this since the
application will be connected over a dial up internet connection, and I want
to keep traffic to a minimum, although this seems the easiest to build.
2. Have the users web browser be redirected to the application's ip address
directly. Here I am not sure which message protocol to use. The kiosk
application will be a .net 2.0 windows form app, but not running on a server
per se, but windows xp pro.
3. Have the database relay a message to the kiosk. I like this way the best,
since the user does not need to know the ip address of the kiosk, and the
kiosk does not need to be open from all ip addresses for security reasons. I
am not which way to do this either. I have read a little about hosting web
services using http.sys, but we probably want a shared hosting plan due to
costs at this point, and they are restrictive about turning on the clr inside
the db. Is there a different way to send a short message?
I apologize in advance if this is the wrong forum.
The following function I am trying to design is to INSERT data into a SQL Server 2005 database. It is called from a different function, parse_file();, which is looping through a .CSV file and returning each record as an array to recordInsert();. Here is the function code and SQL syntax
PHP Code:
function recordInsert($rs)
{
$host = 'Driver={SQL Server}; SERVER=SERVER; DATABASE=DATABASE';
$user = 'USER';
$pass = 'PASS';
$conn = odbc_connect($host, $user, $pass);
$query = "INSERT INTO db.table VALUES ( {$rs['MODEL']}, {$rs['PID']}, {$rs['YEAR']}, {$rs['TOTAL_COST']},
{$rs['PARTS_COST']}, {$rs['LABOR_COST']}, {$rs['PROBCD']}, {$rs['FAIL_PART']},
{$rs['FAIL_PART_NAME']}, {$rs['MILES']}, {$rs['PROBLEM']}, {$rs['CAUSE']},
{$rs['REMEDY']}, {$rs['CLAIM_DATE']}, {$rs['APPRV_DATE']}, {$rs['FAIL_DATE']},
{$rs['SOLD_DATE']}, {$rs['UNIT_AGE']}, {$rs['DEALER']}, {$rs['DEALER_NAME']},
{$rs['ST']}, {$rs['ZIP']}, {$rs['CLAIM']}, {$rs['BTC']}, {$rs['PART_2']},
{$rs['PART_3']}, {$rs['PART_4']}, {$rs['PART_4']}, {$rs['PART_5']},
{$rs['PART_6']}, {$rs['JOBCD1']}, {$rs['JOBCD2']}, {$rs['JOBCD3']},
{$rs['JOBCD4']}, {$rs['PRLN']}, {$rs['RUN_DATE']} );";
$exec = odbc_exec($conn, $query);
if(!$exec)
{
echo "Error: " . odbc_error($exec) . "<br />
" . odbc_errormsg() . "<br />
";
}
else
{
echo "Executed.<br />
";
}
}
parse_file("file.csv", csv);
I am receiving the following error when attempting to INSERT into the database.
Code:
[Microsoft][ODBC SQL Server Driver][SQL Server]The name "YFM700RVL" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
I have tried googling the error and since it is a long error, it has been hard trying to find an answer. One solution I found (which wasn't a solution) was to add the '@' infront of the variables. It did not work.
Kick in the right direction?
Thanks.
Hi I am trying to learn VB 2005 and I am reaching a step in my studies which requires downloading Sql Server 2005. However every time I attempt to download, I receive this error message.
"SQL Server Setup cannot install files to the compressed or encrypted folder: c:Program FilesMicrosoft SQL Server. To continue, make sure that your installation directories are not compressed or encrypted, or specify a different directory, and then run SQL Server Setup again."
I have tried saving it to another folder, this did not help. Somewhere in my search for answers, I came across something that said I needed a strong Sa authentication or password. I did not have a place to store a password in the setup program and when I went to administration password all my fields were blank, so it should not have needed any password. I also tried the link that this error message directed me to and they said they had no further information on this error.
I have exhausted all the leads, a beginner could possibly come across, except you. Please Help!
Hi,
Here is the syntax of the connection string within the web.config file:<connectionStrings><clear />
<add name="MyConnectionString" connectionString="Data Source=000.000.000;Initial Catalog=Database Name;Persist Security Info=True;User ID=XXXXXX;Password=XXXXXX;" providerName="System.Data.SqlClient" />
</connectionStrings>
The test page has a GridView in it which uses the connectionstring fron the web.config file.
Error Message: