[SQLCE Mobile]Do Select During Transaction
Sep 6, 2006
Hi,
I need to do a Select and after a Insert during a Transaction. But when i want to commit this transaction i've the following error message :
The transaction can not be committed if there are any opened cursors in the scope of this transaction. Make sure all data readers / result sets are explicitly closed before committing the change.
I don't understand this error message. How can i close my cursors.
Before my Insert i'm closing my SqlCeDataReader and i dispose it. My SqlCeCommand are also closed and dispose.
Do you have any ID?
Thanks.
View 1 Replies
ADVERTISEMENT
Jun 26, 2007
Hi All,
I have just installed SQL Server Compact Edition (including the SDK) for use with Borland Developer Studio 2006. I have an ADOConnection component on my form, but the Provider I want (Microsoft.SQLSERVER.MOBILE.OLEDB.3.0) is not available. Typing in the connection string: "Provider=Microsoft.SQLSERVER.MOBILE.OLEDB.3.0;Data Source=C:Program FilesMicrosoft SQL Server Compact Editionv3.1SDKSamplesNorthwind.sdf..." results in an "Unspecified Error". I have checked the HKEY_CLASSES_ROOTCLSID and the provider associated with SQLCE is not there.
I've read a couple of posts indicating that it should have been registered during install. Is this the case or do I have to do something more to register this provider?
I've checked the assembly (system.data.sqlserverCe - it seems OK) and re-registered sqlceolebd30.dll. I'm not sure what else needs to be done.
TIA,
Luke
View 6 Replies
View Related
May 1, 2006
How to use the SQLCE Query Analyser in Windows Mobile 5.0?
I have MSPDB.SDF database in WM 5.0. I can't open this sdf file.
Please update me,
what are the softwares i have to install in my WM 5.0 device?
View 6 Replies
View Related
Jul 29, 2007
I have built an application for storing my flight times on my phone after each leg of a trip... I am using C# and Sql CE as the storage system for later export to a larger desktop version (in the works). My question is related to storing the sdf file on the storage card. Can it be done and what would the connection string look like since I have tried and got a error stating it can't find the sdf file in question. I have it setup right where if I were to do a fresh install it would ask for the install directory main memory or storage card. If I select storage card it installs just fine but when I run the app it does fail with the aforementioned error..
Storage Card is 2 gigs..
Thanks
Morgan Vermef
View 3 Replies
View Related
May 19, 2006
I have an SDF using SQLCE 2.0. When I run the app on a Pocket PC device running Windows Mobile 5.0 I get 0x80004005 and 0x80040e21 errors. The same app executes fine on PPC 2003.
The app is written in VC++ using and uses the SQLCE OLEDB Provider to access the SDF. It is complied with eVC 4.0
Any idea as to the problem?
View 5 Replies
View Related
Feb 26, 2008
I'm attempting to use RDA to synchronize a pocket pc emulator with SQL Server 2005 database by following tutorial http://msdn2.microsoft.com/en-us/library/aa454892.aspx, which uses AdvWorksMobile database that comes with SQL Server 2005.
When get to testing of "To test application features " ( step 4 of the merge replication setup lab ), I am receiving SQLCe Exception errors.
ORIGINALLY, I was able to deploy an application and view the local database on the emulator, but once I clicked "InitSinc" button, I received an error.
"Failure to connect to SQL Server with provided connection information. SQL Server does not" exist, access is denied because the SQL user is not a valid user on the SQL Server, or the password is incorrect.
Found this error listed in Server Agent Errors log http://technet.microsoft.com/en-us/library/ms172357.aspx, but it wasn't very helpful since it doesn't provide any suggestions on fixing the problems.
I am brand new to SQL CE Server , mobile programming and .NET framework in general so please bare with me
All the connections / security settings, etc that were set up were taken from a tutorial so I am not sure what SQLCeServer is complaining about. Reading up on the error on the web didn't help, it all pointed to making sure that the snapshot folder had correct permissions set up. I verified that MACHINENAMEUISR_MACHINENAME guest user had Read rights to the database so I don't think that piece is the problem. Otherwise ,Merge publication has been setup in Microsoft SQL Server Management Studio by following the tutorial.
I am trying to run this sync on my home pc so there should be no issues with any user permissions
I have IIS installed
I did NOT have SQL Server Agent running in management studio at this time
I am trying to run this tutorial on an XP machine, which is my regular home PC so I dont think there are any special networking settings to consider
I am able to hit http://localhost/AdvWorksMobile/sqlcesa30.dll from my pc OK, but when I try to hit it from a cradled emulator ( after replacing "localhost" with "MACHINE_NAME" ), Internet Explorer on the emulator gives me a "Cannot Connect With Current Settings" error message. This part wasn't part of tutorial but decided so not sure if I am supposed to be able to hit it from my emulator..so I am not sure if the fact that I can't hit it is related to the problem.
AFTER STARTING SQL SERVER AGENTin Microsoft SQL Server Management Studio, I killed the application, and after relaunching it, it hits "The Specified table does not exist [Vendor]" error. This time it doesn't even launch first - that is I dont even get to pressing "InitSinc" button. Debugger is showing that this error is hit on the following line in AdvWorksMobile.AddWorksDataSetTableAdapters
int returnValue = this.Adapter.Fill(dataTable);
I am not sure why the errors changed on me after starting SQL Server Agent.
What can I do to fix this connection problem?
Thank you so much for your help!
Irina
View 3 Replies
View Related
Oct 23, 2007
can we upgrade a sqlce forgotten password database to sql server for mobile database on our desktop
Thanks & Regards
Mukesh Gupta
View 1 Replies
View Related
Feb 6, 2006
I am currently upgrading our ppc app (written in .net 2003) to .net 2005 and from sqlce 2.0 to 3.0. The new application runs out memory(storage) when handling lots of data transactions (both in case of using sqlcedatareader, and dataset ). There is no memory leak issue here, sqlce 3.0 simply uses a lot more (3 times more) memory than sqlce 2.0.
Our applicaton runs fine using sqlce 2.0 and .net 2003, but fail due to memory shortage
with the upgrades(which has the same code). Anyone can shed some lights on this issue?
View 3 Replies
View Related
May 15, 2006
I'm trying to programmatically create a new table that is a copy of another. The SQL statement I'm making is:
"SELECT * INTO sensor_stream_temp FROM sensor_stream"
and various combinations thereof (such as specifying the columns, etc)
The error I keep getting is:
There was an error parsing the query. [Token line number 1, Token line offset 10, , Token in error = INTO ]
Is it not possible to copy a table using this statement? *sigh*
Thanks in advance for any help.
-Dana
View 3 Replies
View Related
Sep 27, 2006
I'm just getting started with using SQL Server Mobile while creating a handheld app using Visual Studio 2005. So far, I have succeeded in RETRIEVING data from the mobile database, but I don't understand why my INSERT nor UPDATE statements will not work. (I'm assuming they don't work, because after I run my code via the debugger, I oddly get no error message, but when I "open" the table in the Server Explorer, I do not see my expected results. Do I need to do some kind of "commit" or something? Here's my code. Thanks for any help! - Sue
-------------------------------------------
'Create SQL statement:
Dim strSQL As String
strSQL = "INSERT INTO MyTable (col1, col2) VALUES ('yucky', 'poo')"
'Create DB connection:
Dim connDB As New System.Data.SqlServerCe.SqlCeConnection
connDB.ConnectionString = ("Data Source =" _
+ (System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly.GetName.CodeBase) + "SueUWM.sdf;"))
'Create DB command:
Dim cmndDB As New System.Data.SqlServerCe.SqlCeCommand(strSQL, connDB)
'Open the connection:
connDB.Open()
'Execute the command:
Dim intRecordsAffected As Integer
Try
intRecordsAffected = cmndDB.ExecuteNonQuery()
If intRecordsAffected <> 1 Then
MessageBox.Show("Unable to insert into database.")
End If
Catch ex As Exception
MessageBox.Show(ex.ToString, "Insert Error")
End Try
'close the DB connection:
connDB.Close()
-------------------------------------------
View 1 Replies
View Related
Sep 12, 2014
There is column mobile_number in my table
I have to replace with star(*) to the middle six character from contact number of 10 digit.
For example
The Contact number is 9334459875
I have to display it as follows
93******75 first two digit and last two only.
View 1 Replies
View Related
Jun 9, 2006
Does anyone have any instructions on how to go about uprading a .sdf file
from sqlce 2.0 to sqlce 3.0?
I found this on an msdn website
(link: http://www.microsoft.com/sql/editions/sqlmobile/upgrading.mspx) but
as you can see its very lacking on detail. (I included the link and content
referring to upgrading the database files so you won't have to go to the link
to see the part referring to upgrading the database.) I tried to run the upgrade.exe on my device but it doesn't explain how you're supposed to point it to the .sdf that you are trying to update. Here is the content on the above web page.
Upgrading Database Files
You can upgrade a database created with an earlier version of SQL Server CE
2.0 to a database created with SQL Server Mobile by using the SQL Server
Mobile Database Upgrade tool (upgrade.exe). The Database Upgrade tool runs on
a smart device.
When you run the SQL Server Mobile Database Upgrade tool, the new SQL Server
Mobile database is created on the smart device. The new database, with the
file name extension .sdf, contains all the data that was in the source
database. You need to reinitialize the upgraded database to continue using it
for replication.
Note: If you are using replication or remote data access (RDA) as a
connectivity solution before upgrading to SQL Server Mobile, you must
synchronize the source SQL Server CE database (subscription database) with
the SQL Server database (Publisher). The reason for synchronizing before
upgrading to SQL Server Mobile is to ensure that any changes that exist in
the tables on the SQL Server CE database are updated on the SQL Server
database, because after the upgrade you must resubscribe or repull using the
new database.
View 3 Replies
View Related
Oct 11, 2006
I presently run on my server SQL SERVER CE 2.0 and want to install, in addition on SQL Server 2.0, SQL Server Mobile 2005.
Is there a procedure to have both installed and running on a computer?
Thanks!
Marco
View 2 Replies
View Related
Aug 8, 2006
Dear ppl,
I am writing an application for a device (MDA Pro T-Mobile) having Windows Mobile 5.0 using
-MS .NET Compact Framework 2.0 SP-1
-SQL Mobile 2005.
-VS 2005 .NET
The application uses Merge Replication. The error occurs in the Synchronise() Method of the SqlCeReplication object.
"SQL Server Mobile encountered problems when opening the database."
repl.AddSubscription(AddOption.CreateDatabase);
repl.Synchronize();
I don't understand why I am having this error. It does create the database on AddSubscription() method but it is failing opening the database on Synchronise(). I have also tried uninstalling and then reinstalling all the SQL Mobile components in the following order.
-sqlce30.wce5.armv4i.cab
-sqlce30.repl.wce5.armv4i.cab
-sqlce30.dev.ENU.wce5.armv4i.cab
However, when i run this application on a device(Dell X50 AXIM) with Pocket PC 2003, it runs fine creating the database and sysnchronising it.
The target platform for the project is Windows Mobile 5.0 Pocket PC SDK.
Does any one have any clue what could be the problem ?
Regards
Nabeel
View 6 Replies
View Related
Jun 15, 2006
I am migrating a pocket PC application from VS 2003 to VS 2005 and a few weeks ago I hit the following problem when replicating
A SQL Mobile DLL could not be loaded. Reinstall SQL Mobile. [ DLL Name=sqlceca30.dll]
Scanning forums for help I saw that other people had had this problem and one
http://www.eggheadcafe.com/aspnet_answers/NETFrameworkCompactFramework/Feb2006/post25814466.asp
suggested that this problem could be circumvented by getting the replication object early and then continuously using the same object for subsequent replications.
I did this and it works a lot better now but ever so often I get another error which is
Native Error 28559 SQL Mobile encountered problems when opening the database
My only option at this point is to stop and start the application which cures the problem.
View 4 Replies
View Related
Mar 23, 2006
Hello,
I am developping a non-managed C++ application for PocketPC using a SQL Server mobile database.
The application is compiled for PocketPC 2003 and uses SQL Server Mobile v2. I use Visual Studio 2005. But I need to compile the application for Windows Mobile 5.0 devices. So I installed the WM5 SDK and had the WM5 into my project configuration.
The "ssceoledb.h" which I include incluses the "transact.h" file. But my problem is that this file is only provided with the PocketPC 2003 SDK and not in the WM5 SDK.
So I cannot use the WM5 configuration project with SQL Server. I also tried with the last SQL Server Mobile 2005 (ie v3.0) and the "ssceoledb30.h" also includes "transact.h".
Did I miss something to install ?
Do you know how I can resolve the problem ?
By advance, thank you for any answer.
--
Gregoire
View 9 Replies
View Related
May 18, 2006
Using MS VS 2005 (incl SQL Server Mobile)
MS Pocket PC 2005 SDK
I am working on a project that builds for Pocket PC on both Mobile 2003 and Mobile 5. The project uses/will use SQL Server Mobile to store local data.
Project created from new with support for both platforms. I include required header files ssceerr30.h and ssceoledb30.h.
Project builds fine in WM2003 configuration, release and debug.
When I build for WM5 the compiler cannot find the header file transact.h. This is included from within ssceoledb30.h. Same as under WM2003.
In WM2003 configuration if I highlight the ssceoledb30.h include in Visual Studio and open the header, it takes me to <Visual Studio dir>SmartDevicesSDKSQL ServerMobilev3.0. I then locate the include for transact.h and do the same, which takes me <Visual Studio dir>SDKPocketPC2003include. The file exists.
If I repeat the above 'browsing' under the WM5 configuration, ssceoledb30.h takes me to a different copy in the WM5 SDK directory. There is no diff between the file here and the other copy used by WM2003. If I attempt to open transact.h - file does not exist.
Fix (which I'm not too sure about, i.e. is it OK?) - If I copy transact.h to the WM5 SDK directory, the project builds.
Why has transact.h disappeared from WM5 SDK?
I can find no ref's to this problem anywhere. Is my installation of the WM5 SDK corrupt? What else could I be missing?
Is there a sample for SQL Server mobile (like the NorthwindOLEDB sample) that comes configured to build for WM5?
View 1 Replies
View Related
Mar 6, 2006
It is possible to access a Sql Server 2005 Mobile database in a VS2003 application (compact framework) ?
Thanks
Robson
View 4 Replies
View Related
Sep 8, 2007
I receive error 25123 on my PPC (audiovox 6600) in a reproducable way (usually) with .net 2.0 application that is using SQL CE that I wrote:
Open the application
Connect to the database
Close the applicaton
Re-Open the application
Connect to the database <-- Error occurs
I will also receive the error if my application isn't the first application launched (or very close to the first to launch).
I don't believe it's a memory issue as according to the memory manager I have plenty of memory:
At boot up only start screen items loaded: 18.46 Used 49.89 Free
Launch Resco File Explorer to click EXE: 19.18 Used 49.18 Free
Launch my application (no DB connection): 23.64 Used 44.71 Free
Connect to the DB and do select count(*) from a table with 0 rows: 26.27 Used 42.08 Free
Close the application (this.Close() on the form: 19.38 Used 48.97 Free
Relaunch App and connect to DB receive error: around 38 Used around 30 free
I was unable to reproduce the issue right now while typing this message, the last sets of numbers are from memory, and include other applications that are currently running.
The only way I have to get SQL CE to load again is to soft reset the PPC. If the application is able to connect to SQL CE at least once it is fine up till I close it and re-open the application. So it either connects and runs great, or it can't connect at all.
Any help in resolving this issue would be greatly appreciated.
Wayne
View 1 Replies
View Related
Apr 24, 2006
Hi folks, I'm new to Windows Mobile progamming, and new to this forum. Apologies in advance if I'm asking a boneheaded question, but I've done searches and can't find anything directly applicable to my problem.
I'm currently walking through the published MS tutorial in setting up an SQL Server 2005 Mobile application that subscribes to a publication on SQL Server 2005 to exchange information.
I've gotten almost all the way through... successfully set up the server components, creating the publication, etc. On the mobile side, I've been able run the cab files to install the SQL Mobile components and to create the project, add the reference to the dll, and instantiate an engine object. It compiles.
The step in the tutorial after that, though, where you specify the data source from the "data" menu, I've got a problem. When I try to use the "new connection" dialog from choosing the data connection, "MS SQL Server Mobile Edition" doesn't show up as a choice. I've tried choosing any of the other combinations, and in teh subsequent "Connection properties" section my database, SQLMobile (as in their sample) is available, but I get an error when I choose it and click OK. Clicking on "Test Connection" gives me a connection successful message.
My guess is that something about the Mobile server side components is not installed correctly on my development machine, but honestly I have no idea how to begin to fix it. Has anyone seen this problem before and know how to resolve it?
Your time and any knowledge sharing is greatly appreciated.
Thank you,
-Dana
View 8 Replies
View Related
Jul 21, 2006
This is a great tutorial and it's a shame one of the more important steps was missed.
In the €œCreate the snapshot user€? section you you find the steps to create the snapshot_agent account. Then in the €œCreate the snapshot folder€? section you find the share and folder permissions. However, at no point do the instructions advise you about adding the snapshot_agent to the SQL Server Logins. The result is that agent cannot perform the initial snapshot but you won't find this out until 50 steps later after Step 10 in the section €œCreate a new subscription".
To get back on track, openthe Object Explorer's Security section and add the snapshot_agent to your logins. Then using the "User Mappings", set an appropriate level for the SQLMobile database role. Once completed you then need to run the agent.
Right-click the SQLMobile publication you created and select "View Snapshot Agent status". From that dialog you can select "Start" to run the agent. When it completes, you can return to the tutorial section "Create a new subscription" and continue with the tutorial.
View 4 Replies
View Related
Nov 3, 2007
I am studying the tutorial in SQL Server 2005 Mobile Edition Books Online, and the topic is Creating a Mobile Application with SQL Server Mobile. I have got a problem when creating a new subscription after created a new SQL Server Mobile database. And the problem is shown below:
New Subscription Wizard
- Beginning Synchronization (Success)
- Synchronizing Data (100%) (Error)
Messages
* Failure to connect to SQL Server with provided connection information. SQL Server does not exist, access is denied because the IIS user is not a valid user on the SQL Server, or the password is incorrect.
HRESULT 0x80004005 (29061)
* 無法完æˆ?作æ¥ã€‚
- Finalizing Synchronization (Stopped)
- Saving Subscription Properties (Stopped)
Before I have met this problem, I have finished all the task. And I can browse the localhost web site by using anonymous account even I use internet explorer or browse the directly in IIS.
Does anyone can solve it?? Thank you very much~~~
View 3 Replies
View Related
Jun 21, 2002
I have a large DB with several fields i wish to select from, i have managed to select all the fields i require however the output format is not what i hoped.
What is happening is that the address field created is Varchar 200 in length, the input form alows the user to enter this data in 3 seperate boxes - ie. :-
Street name :-
Address :-
County :-
Etc, all the data is then put into 1 db field (address).
I gues you can see whats happening here, when the search returns the data it is displaying the carriage returns and therefore messing up the the next set of data returned.
My long winded question is this - is there a funciton i can call in the select statement which will remove the carriage returns or the blank spaces in the address field ?
Many thanks
James Cregeen
View 3 Replies
View Related
Jul 30, 2004
for example i have a table
and i update a column
using this query:
begin tran
update table1
set column1='something where column2='otherthing'
i dont give the "commit tran" statement
but when i give a select statement on table1
select column1 from table1
where column2='otherthing'
i find the change has been effected eventhough i have not given the commit tran command
can somebody explain me pls
View 2 Replies
View Related
Oct 28, 2006
Hello.
Your help is very much apperciated.
I am using SQL SERVER 2005, and framework 1.1.
I would like to create transaction, that:
inserts a record to one table1 -> selects the new record's PK(identity) ->
Inserts a record to table2, with FK (equals to the PK of table1).
Example:
Table1 (orders):
order ID (PK, identity)
Order Date
Table2(items ordered)
Item ID (PK)
OrderID (FK)
1. Insert a record to table1
2. Get the order ID (PK), of the new record, from table1.
3. Insert record into table2, using the order ID .
I don't know how to include SELECT in transactions.
Can it be done?
Thanks
Roy
View 3 Replies
View Related
Mar 23, 2006
Gurus,How do I choose multi-name 'columns' like "Current LSN" or "TransactionID" from ::fn_dblog?I CAN select single 'column' names like 'Operation' and 'Context'.I do NOT want all 'columns' returned:- I don't want Select (*) from ::fn_dblogDoug
View 2 Replies
View Related
Feb 26, 2006
Is it normal practice to check for @@ERROR after a SELECT statement that retrieves data from a table OR we should only check for @@ERROR after a DELETE/INSERT/UPDATE type of statement? The SQL statement is inside a transaction.
View 1 Replies
View Related
May 31, 2008
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
View 1 Replies
View Related
Dec 18, 2014
Getting Incorrect Syntax near the keyword 'and'
This table returns multiple records for an Invoice.
Based on the transactiontype_desc the Amount_Paid_DC is a different value. Trying to add up the amounts based on the transactiontype.
select DebtorNumber, InvoiceNumber, Sum(Amount_Invoiced_DC) AS InvAmt,
case transactiontype_desc when 'Sales Invoice' then sum(Amount_Paid_DC) else 0 end as AmtPaid,
case transactiontype_desc when 'Discount/Surcharge' and Amount_Paid_DC < 0 then sum(Amount_Paid_DC) else 0 end as DiscountAmt
FROM BI50_BankTransactions_AR_InvcDt_H
group by debtornumber, Invoicenumber
View 6 Replies
View Related
Feb 22, 2007
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
View 3 Replies
View Related
Feb 6, 2007
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
View 1 Replies
View Related
Dec 22, 2006
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
View 8 Replies
View Related
