Hi guys,
ive search high and low for info regarding the "-UseInprocLoader" (in-process BULK INSERT command ) though to no avail. Their are only brief overviews on this property.
does anyone know or have detailed info on the "-UseInprocLoader" Property
1M thanks
Hi
I seem to have a strange problem when applying a snapshot when the tables in the publication have been updated while the snapshot was being generated.
Say for example there is a table called RMAReplacedItem in the publication. When the snapshot starts being applied to the subscriber, a stored procedure called sp_MSins_RMAReplacedItem_msrepl_css gets created that handles an insert if the row already exists (ie it updates the row rather than inserting it). However, after all the data has been loaded into the tables, instead of calling this procedure, it tries to call one called sp_MSins_RMAReplacedIte_msrepl_cssm - it takes the last letter of the table name and adds it to the end of the procedure name.
The worst part is that this causes the application of the snapshot to fail, but it doesnt report what the error is, and instead it just tries applying the snapshot again. The only way i have managed to find which call is failing is to run profiler against the subscriber while the snapshot is being applied and see what errors.
I have run sp_broswereplcmds and the data in there is what is applied to the subscriber - ie the wrong procedure name.
All the servers involved are running sql 2005 service pack 2. The publisher and subscriber were both upgraded from sql 2000, but the distribution server is a fresh install of sql 2005.
Hello, I have setup web sync from wm 5.0 and it seems to crash when applying the snapshot. Looking at the column definitions it seems fine. Am I missing something? Thanks in advance.
John
The identity column must be either an integer or big integer data type and cannot be NULL.
HRESULT 0x80004005 (25551)
The SQL statement failed to execute. [ SQL statement = CREATE TABLE "macros" ( "peopleid" numeric ( 18 , 0 ) NOT NULL , "macroid" numeric ( 18 , 0 ) IDENTITY ( 1 , 1 ) NOT NULL , "description" nvarchar ( 255 ) NULL , "rowguid" uniqueidentifier ROWGUIDCOL NOT NULL CONSTRAINT "MSmerge_df_rowguid_8E4B26C6706844BC984B039BA07845B5" DEFAULT ( NEWID ( ) ) ) ]
HRESULT 0x80004005 (28560)
The operation could not be completed.
I generated a snapshot and it completed Successfully.
How do I apply the snapshot so that the data is refreshed?
[URL]
Hi
We are using HTTPS merge replication - is it possible to specify an alternative location when applying the initial snapshot ?
Thanks
Bruce
Hi
Using HTTPS web synchronisation - merge replication.
I have a very strange error where it bombs out half-way through downloading the snapshot
Downloaded a total of 3 chunks.
Downloaded snapshot file 'snapshot.pre'.
Downloaded snapshot file 'myView_6.sch'.
Downloaded snapshot file 'table2_2.sch'.
Downloaded snapshot file 'table2_2.cft'.
Downloaded snapshot file 'table3_3.sch'.
Downloaded snapshot file 'table3_3.cft'.
Downloaded snapshot file 'mytestProc1_4.sch'.
Downloaded snapshot file 'mytestProc3_5.sch'.
Downloaded snapshot file 'MSmerge_tombstone.bcp'.
Downloaded snapshot file 'MSmerge_contents90_forall.bcp'.
Downloaded snapshot file 'MSmerge_genhistory90.bcp'.
Downloaded snapshot file 'sysmergesubsetfilters90.bcp'.
Downloaded snapshot file 'table2_2.bcp'.
A failure occurred when accessing 'MSmerge_contents_table290_forall.bcp' due to an operating system error [3='The system cannot find the path specified.'] during Web synchronization. Ensure that the -InternetLogin user when using basic authentication and the user running the merge when using Windows integrated authentication has been granted access to the snapshot share.
A failure occurred when accessing 'MSmerge_contents_table290_forall.bcp' due to an operating system error [3='The system cannot find the path specified.'] during Web synchronization. Ensure that the -InternetLogin user when using basic authentication and the user running the merge when using Windows integrated authentication has been granted access to the snapshot share.
The processing of the response message failed.
I've tried compressing the snapshot, and can see the bcp file in the snapshot.
HELP !!!
Bruce...
Hello all,
I have a unusual problem with a snapshot publication that I am having a hard time troubleshooting. The servers in question are all SQL 05 Enterprise. Here is the scenario:
Staging Server - This server acts as the publisher of the snapshot
Production Server - This server is the subscriber of the staging snapshot
Cascade Servers - These servers receive transactional updates from the production server
The staging server applies the snapshot to production successfully. From there the production server has a transactional publication which the subscribers are the cascade servers.
This model worked for a long time where we would generate the snapshot apply it to production and the updates would be sent to the cascade servers. All of a sudden there is a problem with the transactional publication from production -> cascade. There are 7-10 tables that do not receive the updates and all data in the problematic tables is truncated. The other remaining tables in the subscription receive the updates as needed. Looking at replication monitor and all other logs shows that the transactions are being replicated, but yet the 7-10 problematic tables do not contain any data. The only solution I have found for this is to recreate the entire replication model from scratch.
Any advice on how to handle this scenario? Is my model for using a transactional publication to cascade changes to a subset of servers incorrect?
Hi,
i am getting the below error while applying running the Synchronization agent for the Subscriber. I have created replication topology with one central server and one subscriber. Here central server has windows server 2003 and subscriber has windows XP. Both are having SQL server 2005. After creating the merge subscriber, i am runnnig the Synchronization agent manually for the first time. While running that i am getting below error. Anybody aware of this error.
2006-06-24 00:26:00.175 Applying the snapshot to the Subscriber
2006-06-24 00:26:02.722 The schema script 'D_NUM_7.sch' could not be propagated to the subscriber.
2006-06-24 00:26:02.784 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The schema script 'D_NUM_7.sch' could not be propagated to the subscriber.
2006-06-24 00:26:02.816 Category:AGENT
Source: WMBT-07
Number: 0
Message: The process could not read file '\WMBT-01
epldatauncLTR-IN001_TEST_PUB20060624034804D_NUM_7.sch' due to OS error 1265.
2006-06-24 00:26:02.831 Category:OS
Source:
Number: 1265
Message: The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you.
I am setting up a combination of transactional and merge replicationon a very large database and do not want to apply the initial snapshotsince this would take to long. I am doing this with scripts that werepreviosly created when the database was not this big. I want to copythe publisher DB over to the Subscriber Server. Can I use theparameter @sync_type to 'none' when running the sp_addsubscription?Does anyone have any experience in doing this?Thanks in Advance for any help on this.Alan
View 2 Replies View RelatedHi guys, Im desperately hoping someone here can help me. Ive been trying to set up merge replication between 2 servers all weekend and it keeps failing. Im setting this up as follows
The Publisher/Distributor is a SQL Server 2005 machine, the database being replicated is 4gb, and the only subscriber is a SQL Server 2000 SP4 machine. I set up my publication normally, and set up the push subscription, adn set it to initialize immediately. It weill then start bulk copying and go on for about 3-4 hours before it fails and gives me the errors:
Error messages:
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201001)
Get help: http://help/MSSQL_REPL-2147201001
The process could not bulk copy into table '"dbo"."CONTENT"'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20037)
Get help: http://help/MSSQL_REPL20037
An existing connection was forcibly closed by the remote host. (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
One or more BLOB columns could not be sent to the server, attempt to recover from the problem failed. (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Communication link failure (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Unspecified error (Source: MSSQLServer, Error number: 0)
Get help: http://help/0
Failed to send batch after max errors (Source: MSSQLServer, Error number: 0)
This is driving me crazy as I havent slept in ages trying to get this fixed. Anyone have any idea whats going on? Its always one of 2 tables so far that keep failing, ContactLog and Content, what can I do?
Replication is failing while applying the snapshot as the stored procs are out of sync ( the objects referenced in the stored procedures are no more exists in the database) . Is there any easy way to identify the out of sync procedures so that I can exclude these stored procedures from the articles list. I am having around 1000 procs and is not possible to test them by executing.
Thanks in advance.
Hi
I am basically a sybase guy but unfortunately I need to patch a SQL server with SP3. This is the first time I will be doing that. So I am not sure that after applying SP3, if I would need to rebuild all databases again.
Could anybody tell me what and where is the impact when we install SP3..??
I would appreciate any kinda help.
Rgds
Wilson
Should I apply SP2 even though I have already installed the community preview?
View 1 Replies View RelatedIn my package i have column called "optinout" coming from source file which has the value "start" and "stop", now in my destination table i have a column called "contact permission code" to which i need to apply a business rule based on the value in column "optinout" the rule is as stated "Contact Permission Code" is OptOut if "OptInOut" value is "STOP" else OptIn.
View 4 Replies View RelatedHi all
I just want to make sure I have the proper understanding of how to apply MS security patches in a replicated SQL2k environment.
1) Upgrade Distributor
2) Upgrade Publisher
3) Upgrade Subcriber(s)
Any comment or suggestion would be highly appreciated :-)
Hi,
I am trying to install the eval version of Reporting Services. One of the requirements for installing this is to have SQL Server 2000 with service pack 3a. I've downloaded the service pack and followed the instructions documented by Microsoft (applying SQL2KSP3.exe, then SQL2KASP3.exe).
It appears that the application of the service packs did nothing. No errors where returned after the executable was run. But, after having applied these service packs, the version has not changed. I have restarted the service, and the server with no success. The version that is returned is
'Microsoft SQL Server 2000 - 8.00.194'.
I am running MSSQL server Developer Edition, running on Windows 2000 Professional (service pack 4).
Any suggestions. I have even uninstalled the SQL server and re-applied the service packs, so I really am having trouble trying to figure out what to do next.
Thanks,
Jim
When I try to run SQL Server 6.5 Service Pack 5a, I consistently receive the error message
"Setup initialization could not be successfully completed.
cfgchar.exe could not be executed. Please check the relevant
out file."
I am currently at Service Pack 3.
1) I have insured that the PATH environment variable does not contain quotes.
2) I have no other applications running at the same time as the service pack is running.
The contents of the cfgchar.out file appear as follows:
C:MSSQLcharsets - created
C:MSSQLcharsetscp1250 - created
C:MSSQLcharsetscp1250DICTION.250 - copied
C:MSSQLcharsetscp1250NOCASE.250 - copied
C:MSSQLcharsetscp1250CSYDIC.250 - copied
C:MSSQLcharsetscp1250CSYNC.250 - copied
C:MSSQLcharsetscp1250HUNDIC.250 - copied
C:MSSQLcharsetscp1250HUNNC.250 - copied
C:MSSQLcharsetscp1250PLKDIC.250 - copied
C:MSSQLcharsetscp1250PLKNC.250 - copied
C:MSSQLcharsetscp1250ROMDIC.250 - copied
C:MSSQLcharsetscp1250ROMNC.250 - copied
C:MSSQLcharsetscp1250SHLDIC.250 - copied
C:MSSQLcharsetscp1250SHLNC.250 - copied
C:MSSQLcharsetscp1250SKYDIC.250 - copied
C:MSSQLcharsetscp1250SKYNC.250 - copied
C:MSSQLcharsetscp1250SLVDIC.250 - copied
C:MSSQLcharsetscp1250SLVNC.250 - copied
C:MSSQLcharsetscp1251 - created
C:MSSQLcharsetscp1251DICTION.251 - copied
C:MSSQLcharsetscp1251NOCASE.251 - copied
C:MSSQLcharsetscp1251UKRDIC.251 - copied
C:MSSQLcharsetscp1251UKRNC.251 - copied
C:MSSQLcharsetscp1253 - created
C:MSSQLcharsetscp1253DICTION.253 - copied
C:MSSQLcharsetscp1253NOCASE.253 - copied
C:MSSQLcharsetscp1253GRALTDCT.253 - copied
C:MSSQLcharsetscp1253GRMXTDCT.253 - copied
C:MSSQLcharsetscp1253GRNOACCE.253 - copied
C:MSSQLcharsetscp1254 - created
C:MSSQLcharsetscp1254DICTION.254 - copied
C:MSSQLcharsetscp1254NOCASE.254 - copied
C:MSSQLcharsetscp1255 - created
C:MSSQLcharsetscp1255DICTION.255 - copied
C:MSSQLcharsetscp1255NOCASE.255 - copied
C:MSSQLcharsetscp1257 - created
C:MSSQLcharsetscp1257DICTION.257 - copied
C:MSSQLcharsetscp1257NOCASE.257 - copied
C:MSSQLcharsetscp1257ETIDIC.257 - copied
C:MSSQLcharsetscp1257ETINC.257 - copied
C:MSSQLcharsetscp1257LTHDIC.257 - copied
C:MSSQLcharsetscp1257LTHNC.257 - copied
C:MSSQLcharsetscp1257LVIDIC.257 - copied
C:MSSQLcharsetscp1257LVINC.257 - copied
isql failed - Exit Code: 1
Any ideas?
Peter Townsend
Litens Automotive Group
Are there any guidelines or best practices for deploying or testing Service Packs? What types of tests should be performed prior to upgrading or do I just trust Microsoft?
View 4 Replies View RelatedHi,
I need to modify an already existing stored procedure, which takes three parameters. Currently it uses exclusively "or" logic to apply the parameters to a select statement. e.g.
and (adid = @adID or (editorID = @editorID and aa.editorTypeID = 1))
What I need it to do is to apply a different "and/or" logic depending on what is supplied. If two or three parameters are supplied then it needs to use "and" logic to join them. Howver, if just one parameter is supplied then it should search on that parameter alone - which it won't do if I just join them all together using "and" by default.
The work has to be done inside the T-SQL, not in the calling code. I only know two ways of doing this. Firstly to create different stored procedures and use the calling code to pick one or the other depending on supplied parameters. The other is to do if/or login inside the SP itself on the values of the parameters. Either way presents something of a maintenance nightmare. Is there any other way to do this?
Cheers,
Matt
Is there anyway I can integrate the ssis in Web applications or Windows applications?
Thanks
I have never applied a service pack to sql server 2000. Someone tells me that you have an option of supplying the SA password but do not have to and the service pack is applied just as if you did supply the SA password. This sounds odd to me. So, is it true? I am asking because our server instance shows "SP4" but a fix that was supposed to be included in SP4 was apparently not as the problem persists (link from sql server 2005 to 2000 fails when referenced in sql2005). I was thinking that whoever ran the service pack may not have provided the SA password so some of the SP4 was not applied???
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "s-1". The provider supports the interface, but returns a failure code when it is used.
Thanks.
Ok I already have a
database layed out with several tables and relationships set up, and i
went ahead and built a bunch of pages that I was planning on using.
While i was doing this I ran into 2 problems, the first was i wrote
some SQL statements to insert data from input boxes into some tables i
have in my database, i used a catch exception statement as well as a
if/else statement to handle the transfer to diffirent pages like a
signup succeded or failed, the problem im having is that the data isnt
saving into the database. (I was modeling my code after the Video 8 in the
Learning SQL server 2005 Express Edition for Beginners Video Series....
I actually got them to work......sorta....) When i test it no
exceptions are thrown and it continues on like nothing went wrong. The
other Problem i ran into was i realized i wanted to use the memberships
and roles provided by ASP.NET 2.0, and since i already created the pages for the site, i was
wondering if there was a way to add them in. This site isnt anything
fancy at all, i wanted to try and create a app where users sign up and
create an account on the site, but i also wanted to have the
flexability to insert and retrieve data from the database with out
having to be stuck in the templates. Sorry for the long story im
trying to give all the info possible. Any help on this would be
great! Thanks!
Is there a way to apply .css or Skin files to all reports. Changing colors in each and every page is a little cumbersome.
Thanks in advance
Our update of KB 934458 to SQL Server 2005 SP2 has failed on a Windows 2003 SP2 server. This is a standard version of SQL Server.
The error reported is:
Error Number : 29506
Error Description : MSP Error: 29506 SQL Server Setup failed to modify security permissions on file e:MSQLMSSQLData for user Administrator. To proceed, verify that the account and domain running SQL Server Setup exist, that the account running SQL Server Setup has administrator privileges, and that exists on the destination drive.
I have verified that Administrator has full control permissions for the folder indicated in the error message. The SQL Server Service account also has full control permissions on the folder.
I have run the update as administrator without any access restriction.
Any advice will be appreciated.
Thanks
I have some C# code written a little while that imports data nightly
into a database. Most of the data is typically deleted from the tables
and imported again. There are some tables where data is never deleted
and references other tables. Because there are constraints between
these tables, the code processes the import in the following sequence.
get constraints from database->drop constraints->delete data->apply
constaints->import data
I was curious how I can accomplish similiar results in SSIS. I know I
can execute a process task to manage the constraints, but I was
wondering if there is any other way.
Thanks,
PJ
Hi,
I'm retrieving data from a cube using a datareader, all the measures have format string, but when retrieve from Integration services it's lost.
I know there is a way to get the format string as columns using extended properties of the conection. I haven't tried this yet, but is there any way of reapplying this format to the columns using this format strings??
thanks
I am DBA and have worked for 3 years on sql Server 7 production servers. I briefly looked at SQL 2000 on desktop edition.
Should I be worried about applying for dba positions which have SQL 2000 production server environment. Companies will ask how much SQL 2000 experiance I have. I feel a little nervous as I have not the exposure to a live SQL 2000 production server environment.
From what I have seen the bread and butter DBA tasks have not changed between sql 7 and sql 2000.
I am hoping to get the opinion of fellow DBA's on this subject.
Thanks Pargat
We need to apply the transactional log for business hours (9-5) everyday to a oracle instance which will be seeded with SQL Data for once. And then every day the transactional log would be applied.
We need to do this as eventually this server is moving to oracle.
At this point if somebody could help me to read the transactional log that would be great.
Thanks,
I am DBA and have worked for 3 years on sql Server 7 production servers. I briefly looked at SQL 2000 on desktop edition.
Should I be worried about applying for dba positions which have SQL 2000 production server environment. Companies will ask how much SQL 2000 experiance I have. I feel a little nervous as I have not the exposure to a live SQL 2000 production server environment.
From what I have seen the bread and butter DBA tasks have not changed between sql 7 and sql 2000.
I am hoping to get the opinion of fellow DBA's on this subject.
Thanks Pargat
Hi. Was hoping to get some advice on applying a hotfix to a SQL Server 2005 failover Cluster.
The hotfix I am applying (KB933508) relates to a Maintenance Plans issue with Server 2005 Service Pack 2. During installation I'm advised that unless the SQL Server and other services are stopped a reboot will be required, although I can still install the hotfix. However the installation is failing. There are error details in the relevant logs created in C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix to the effect that the 'Debug' value in registry key 'SoftwarePoliciesMicrosoftWindowsInstaller' can't be read and that SQL Server was unable to add a user (the account under which SQL Server Agent and Analysis Services run) to a local group (the domain group in which SQL Server logins are contained).
Is this something simple like explicitly shutting down the services first before applying the hotfix or is there something else going on?
Regards,
YaHozna
I've got a 4 node SQL 2008R2 cluster (configured 2 active - 2 passive), and 9 instances, of which all but one are on SP1 (the most recent addition is on SP2).
I need to apply a hotfix (Cumulative Update 6 for SP1) to just one instance. Can I do this by failing over the affected instance to one of the passive nodes, applying the hotfix, and failing it back again or do I need to apply the hotfix to all nodes as detailed in:
SQL Server failover cluster rolling patch and service pack process
i.e. will it involve a little downtime for all instances on the cluster?
I have a 2 way cluster and I want to apply SP4 on it.
Basically, I have 2 servers. Server A runs a default instance and another instance. While the default services is disabled and the other instance is running, Server B runs the default instance and has the other instance disabled. This basically acts like a 2 way cluster (active/passive).
How can I apply SQL Server 2000 SP4 on the 2 servers and have all the nodes come up the correct way? What are the steps to achieve this?
Hi,
i have created a rdl file with 10 columns.Also i have an aspx page which will list the ten columns. The user can select some columns and on clicking report button report will be generated in PDF format(Using the rdl file).
Now i want to apply style sheet to the report dynamically from aspx page.. how to do that..Help me.
Thanks in advance