hello everybody, i have a question to ask,
suppose i have a sqldatasource, can i use it in a method??
this is my case, i need to make a new method to count the rows in a datagrid, so i will have to read the sqldatasource. the problem is, how to retrieve it?? usually i use the built in sqldatasource_selected to count the rows....
is there any other way??
Hi All,
i want to use sqldatasource with controlparameters.there are some textboxes and a dropdownlist on my page.i can easily insert and delete records on database table by using these controls as controlparameters by sqldatasource insert() and delete() method but updating fails.i use try catch block to see the error but no errors found.And also update() method returns 1 that indicates that it worked fine but when i look into the database i see that the record is not updated.i am stucked and surprised.any ideas please?
Thanks
Hi,
I am using a grid view with parameter defined in dropdown list. the asp code is:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Pubs %>"
SelectCommand="SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"
DeleteCommand="DELETE FROM [authors] WHERE [au_id] = @au_id">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="state" PropertyName="SelectedValue"
Type="String" /></SelectParameters>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Pubs %>"
SelectCommand="SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"
DeleteCommand="DELETE FROM [authors] WHERE [au_id] = @au_id">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="state" PropertyName="SelectedValue"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
</asp:SqlDataSource>
I would like to to set the parameter assignment in my VB code in Page_Load methodWhen i am using:
SqlDataSource1.SelectParameters("state").DefaultValue = DropDownList1.Text
SqlDataSource1.SelectCommand = "SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"I get error message saying: Object reference not set to an instance of an object.
Any ideas how I can set the select parameters (in my VB code) to use the dropdown list I have in my page?
Thanks,
Uzi
hiplz can any one tellHow should i use select method of SqlDatasourceplz show little code toothanks
View 1 Replies View RelatedHi, it is few days I posted here my question, but received no answer. Maybe the problem is just my problem, maybe I put my question some strange way. OK, I try to put it again, more simply. I have few textboxes, their values I need to transport to database. I set SqlDataSource, parameters... and used SqlDataSource.Insert() method. I got NULL values in the database's record. So I tried find problem by using Microsoft's sample code from address http://msdn2.microsoft.com/en-us/library/system.web.ui.webcontrols.sqldatasource.insert.aspx. After some changes I tried that code and everything went well, data were put into database. Next step was to separate code beside and structure of page to two separate files followed by new test. Good again, data were delivered to database. Next step: to use MasterPage, very simple, just with one ContentPlaceHolder. After this step the program stoped to deliver data to database and delivers only NULLs to new record. It is exactly the same problem which I have found in my application. The functionless code is here:http://forums.asp.net/thread/1437716.aspx I cannot find any answer this problem on forums worldwide. I cannot believe it is only my problem. I compared html code of two generated pages - with maserPage and without. There are differentions in code in ids' of input fields generated by NET.Framework:Without masterpage:<input name="NazevBox" type="text" id="NazevBox" /><span id="RequiredFieldValidator1" style='color:Red;visibility:hidden;'>Please enter a company name.</span><p><input name="CodeBox" type="text" id="CodeBox" /><span id="RequiredFieldValidator2" style='color:Red;visibility:hidden;'>Please enter a phone number.</span><p><input type="submit" name="Button1" value="Insert New Shipper" onclick="javascript:WebForm_DoPostBackWithOptions(new WebForm_PostBackOptions("Button1", "", true, "", "", false, false))" id="Button1" /> With masterpage:<input name="ctl00$Obsah$NazevBox" type="text" id="ctl00_Obsah_NazevBox" /><span id="ctl00_Obsah_RequiredFieldValidator1" style='color:Red;visibility:hidden;'>Please enter a company name.</span><p><input name="ctl00$Obsah$CodeBox" type="text" id="ctl00_Obsah_CodeBox" /><span id="ctl00_Obsah_RequiredFieldValidator2" style='color:Red;visibility:hidden;'>Please enter a phone number.</span><p><input type="submit" name="ctl00$Obsah$Button1" value="Insert New Shipper" onclick="javascript:WebForm_DoPostBackWithOptions(new WebForm_PostBackOptions("ctl00$Obsah$Button1", "", true, "", "", false, false))" id="ctl00_Obsah_Button1" />In second case ids' of input fields have different names, but I hope it is inner business of NET.Framework.There must be something I haven't noticed, maybe NET's bug, maybe my own. Thanks for any suggestion.
View 2 Replies View RelatedHi, I need to send a table data into flat and then ftp into different location.
I was using xp_cmdshell via sql task but my network engineer is saying that this xp_cmdshell will break the security and recomond to use "Execute Process Task". If i'm using this task getting the below error.
Could you advice me regrding network engineer thought and any solution for avoiding this error.
---------------------------
Execute Process Task: C:WINDOWSsystem32ftp.exe
---------------------------
CreateProcessTask 'DTSTask_DTSCreateProcessTask_1': Process returned code 2, which does not match the specified SuccessReturnCode of 0.
---------------------------
Thanks,
I am using <asp:SqlDataSource ID and for the Select Command, the following, where the WHERE clause ... for an exact match (=) works correctly:
SelectCommand="SELECT [PatientID], [MedRecord] , [Accession], [FirstName], [LastName], [Address1] FROM [ClinicalPatient] WHERE (LastName = @LastName) ORDER BY [LastName]DESC">
I would like to do a "LIKE" search where the LastName Parameter is matched using "LIKE". In this situation how would the syntax be written.... I tried:
LastName LIKE '%" & LastName & "%'"
But I get an error???? Any suggestions, please...
Thanks !!
Hello all,
I am having problem to insert the record into database from sqldatasource control. my code is listed below, and i can't find anything why it cause the exception...
<asp:SqlDataSource ID="SqlDataSource1" runat="server" DataSourceMode="DataSet" ConnectionString="<%$ ConnectionStrings:WebsiteDataConnection %>" SelectCommand="SELECT * FROM [ServiceAgents]" InsertCommand="INSERT INTO ServiceAgents VALUES(@Ser_STATE, @Ser_CITY, @Ser_AGENT, @Ser_PHONE, @Ser_EQUIPMENT)"> <InsertParameters> <asp:FormParameter Name="Ser_STATE" FormField="TextBox_state"/> <asp:FormParameter Name="Ser_CITY" FormField="TextBox_city"/> <asp:FormParameter Name="Ser_AGENT" FormField="TextBox_agent"/> <asp:FormParameter Name="Ser_PHONE" FormField="TextBox_phone"/> <asp:FormParameter Name="Ser_EQUIPMENT" FormField="TextBox_equip" /> </InsertParameters> </asp:SqlDataSource>
The table has got the fields that needed for insert command, for example:
<table> <tr> <td>State:</td> <td> <asp:TextBox ID="TextBox_state" runat="server"></asp:TextBox> <asp:RequiredFieldValidator id="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox_state" Display="Static" ErrorMessage="Please enter a state." /> </td> </tr> <tr> <td>City:</td> <td> <asp:TextBox ID="TextBox_city" runat="server"></asp:TextBox> <asp:RequiredFieldValidator id="RequiredFieldValidator2" runat="server" ControlToValidate="TextBox_city" Display="Static" ErrorMessage="Please enter a city." /> </td> </tr> <tr> <td>Agent:</td> <td> <asp:TextBox ID="TextBox_agent" runat="server"></asp:TextBox> <asp:RequiredFieldValidator id="RequiredFieldValidator3" runat="server" ControlToValidate="TextBox_agent" Display="Static" ErrorMessage="Please enter a agent." /> </td> </tr> <tr> <td>Phone:</td> <td> <asp:TextBox ID="TextBox_phone" runat="server"></asp:TextBox> <asp:RequiredFieldValidator id="RequiredFieldValidator4" runat="server" ControlToValidate="TextBox_phone" Display="Static" ErrorMessage="Please enter a phone No." /> </td> </tr> <tr> <td>Equipment:</td> <td> <asp:TextBox ID="TextBox_equip" runat="server"></asp:TextBox> <asp:RequiredFieldValidator id="RequiredFieldValidator5" runat="server" ControlToValidate="TextBox_equip" Display="Static" ErrorMessage="Please enter a equipment." /> </td> </tr> <tr> <td></td> <td> <asp:Button ID="Button2" runat="server" Text="Add" OnClick="addEntry" BackColor="#FFFBFF" BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px" Font-Names="Verdana" Font-Size="1.0em" ForeColor="#284775"/> </td> </tr> </table>
And in the code i just called: SqlDataSource1.Insert(); Then the page gives me the exception like:
Cannot insert the value NULL into column 'STATE', table 'WebsiteData.dbo.ServiceAgents'; column does not allow nulls. INSERT fails. The statement has been terminated.
But i actually input all the required text in the textbox.... Any idea guys?
Thanks
I have a SqlDataSource object that is bound to a GridView control. I have configured the SqlDataSource with a default select command. Under certain values of query strings on the URL for this page (Default.aspx), I want to change the select command. So I put the statements in the Page_Load method for Default.aspx to define SqlDataSource1.SelectCommand. The changed SelectCommand works fine for the first page of GridView data and shows 5 GridView pages, but if I switch to one of the other pages, it seems to revert to the default SelectCommand (which generates 19 GridView pages). I assume I should put my code to change the SelectCommand somewhere else. Can someone help me with where to put it? Thanks!
View 1 Replies View RelatedI get the following error, when I try to create a company. Any help would be appreciated. Error Code: Cannot insert the value NULL into column 'CompanyName', table 'Telemetry.dbo.Company'; column does not allow nulls. INSERT fails.The statement has been terminated. Here is my aspx file: <table> <tr ><td style="width:110px"><b>Company Name:</b></td><td ><asp:TextBox ID="CompanyName" Text="" runat="server" width="250px"/></td></tr> <tr><td ><b>Phone Number:</b></td><td ><asp:TextBox runat="server" ID="CompanyPhone" Text="" Width="250px"/></td></tr> <tr><td ><b>Company E-mail:</b></td><td ><asp:TextBox runat="server" ID="CompanyEmail" Text="" Width="250px"/></td></tr> <tr><td ><b>Street Address:</b></td><td><asp:TextBox runat="server" ID="AddressStreet" Text="" Width="250px"/></td></tr> <tr><td ><b>City :</b></td><td><asp:TextBox runat="server" ID="AddressCity" Text="" Width="200px"/></td></tr> <tr><td ><b>State/Province:</b></td><td><asp:TextBox runat="server" ID="AddressState" Text="" Width="150px"/></td></tr> <tr><td ><b>Zip Code:</b></td><td><asp:TextBox runat="server" ID="AddressZip" Text="" Width="150px"/></td></tr> <tr></tr> </table> <asp:Button ID="Submit" runat="server" OnClick="Submitinfo" /> <br /> <asp:SqlDataSource ID="sqlCreateCompany" runat="server" ConnectionString="<%$ ConnectionStrings:SqlServer1 %>" InsertCommand="INSERT INTO Company(CompanyName, CompanyPhone, CompanyEmail, AddressStreet, AddressCity, AddressState, AddressZip) VALUES (@CompanyName, @CompanyPhone, @CompanyEmail, @AddressStreet, @AddressCity, @AddressState, @AddressZip)" SelectCommand="SELECT [CompanyID], [CompanyName], [CompanyPhone], [CompanyEmail], [AddressStreet], [AddressZip], [AddressState], [AddressCity] FROM [Company]" > <InsertParameters> <asp:FormParameter Name="CompanyName" FormField="CompanyName"/> <asp:FormParameter Name="CompanyPhone" FormField="companyPhone" /> <asp:FormParameter Name="CompanyEmail" FormField="CompanyEmail" /> <asp:FormParameter Name="AddressStreet" FormField="AddressStreet" /> <asp:FormParameter Name="AddressCity" FormField="AddressCity" /> <asp:FormParameter Name="AddressState" FormField="AddressState" /> <asp:FormParameter Name="AddressZip" FormField="AddressZip" /> </InsertParameters> </asp:SqlDataSource> .....Behind the code.............. protected void Submitinfo(object sender, EventArgs e) { //TextBox t = (TextBox)FormView1.FindControl("CompanyName"); sqlCreateCompany.Insert(); } .........Database Company Table Design..............CompanyID int UncheckedCompanyName varchar(100) UncheckedCompanyPhone varchar(50) CheckedCompanyEmail varchar(100) CheckedAddressStreet varchar(100) CheckedAddressCity varchar(50) CheckedAddressState varchar(2) CheckedAddressZip varchar(5) CheckedCompanyLogo varchar(100) Checked
View 2 Replies View Relatedhi i have an sqldatasource which has an insert command - a stored procedue is used.I have a text box with a button next to it . it is not in a datagrid.on the onclick event I would like to pass the value of the text box to the sqldatasource insert parameter ( it only expects this one parameter , and use the sqldatasource to do the insert basically doing a manual insert using the sqldatasource.does anyone know if this is possible thanks
View 2 Replies View Relatedi need to dyanamically generate my SQL commands so to do that i am generating sqldatasource commands programmatically rather declaratively. SELECT commands seems to work fine but DELETE isnt doing anything, here is my code:
SqlDataSource sdsConsultant = new SqlDataSource();
protected void Page_Load(object sender, EventArgs e)
{
if (!IsPostBack)
{
loadDataSet(); //it just loads dataset used by formview
initializeSDS();
}
}
protected void initializeSDS()
{
string strConnection = ConfigurationManager.ConnectionStrings["myDB"].ToString();
sdsConsultant.ConnectionString = strConnection;
//SELECT
sdsConsultant.SelectCommand = "SELECT * FROM Consultants WHERE (id=@id)";
QueryStringParameter id = new QueryStringParameter("id", "id");
sdsConsultant.SelectParameters.Add(id);
//DELETE
sdsConsultant.DeleteCommand = "DELETE * FROM Consultants WHERE (id=@id2)";
QueryStringParameter id2 = new QueryStringParameter("id2", "id");
sdsConsultant.DeleteParameters.Add(id2);
//UPDATE
Page.Controls.Add(sdsConsultant);
FormView1.DataSource = sdsConsultant;
FormView1.DataBind();
}
my formview control looks like:
<asp:FormView DefaultMode="Edit" ID="FormView1" runat="server" DataKeyNames="id"
OnItemDeleted="FormView1_ItemDeleted"
OnItemDeleting="FormView1_ItemDeleting">
the DELETE doesnt execute and the OnItemDeleted event doesnt do anything either. am i doing something wrong here? plz help
My compiler says that the line in bold below is illegal. The error msg I'm getting is: No overload for method 'select' takes '0' arguments. How can I correct this error and execute a SELECT?
protected void Button1_Click(object sender, EventArgs e)
{
SqlDataSource2.Select ();
}
protected void SqlDataSource2_Selected(object sender, SqlDataSourceStatusEventArgs e)
{string strReadyFirstName = e.Command.Parameters["@FirstName"].Value.ToString();string strReadyLastName = e.Command.Parameters["@LastName"].Value.ToString();
}
<asp:SqlDataSource ID="SqlDataSource2" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [User_ID], [User_Name], [FirstName], [LastName], [Company_Name], [Department_Name] FROM [CompanyDepartment] WHERE ([User_Name] = @User_Name)" OnSelected="SqlDataSource2_Selected">
<selectparameters>
<asp:sessionparameter DefaultValue="TheirUserName" Name="User_Name" SessionField="TheirUserName" Type="String" />
</selectparameters>
</asp:SqlDataSource>
I have a GridView (that uses SqlDataSource1) and a Dropdownlist. Depending upon the value selected on the DropDownList I need to select different stored procedures for the gridview. The problem is that I can do it without taking SqlDataSource1 by using DataSet or DataTable. But, I need to Use SQLDataSource1 for easy way of Header SORTING. So, is there any way to change the SQLDatasource1.SELECT Command dynamically. So that, I can use different queries for the Single DataGrid. I have attached the sample code of the SqlDataSource1 I'm using. I need to change the Command i.e. SelectCommand="usp_reports_shortages" to "usp_reports_shortagesbyID" and "usp_reports_shortagesbyDate" depending on the value selected in the dropdownlist. So, is there any way to do this????<asp:SqlDataSource ID="SqlDataSource1"
runat="server"
ConnectionString="<%$
ConnectionStrings:TESTDrivercommunication %>"
SelectCommand="usp_reports_shortages" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:ControlParameter ControlID="lblDriver" Name="date1" PropertyName="Text" Type="DateTime" />
<asp:ControlParameter ControlID="lblTODate" Name="date2" PropertyName="Text" Type="DateTime" />
<asp:ControlParameter ControlID="DDlDriver" Name="driver" PropertyName="SelectedValue"
Type="Int32" />
<asp:SessionParameter Name="week" SessionField="s_week" Type="DateTime" />
</SelectParameters>
</asp:SqlDataSource>
I have an SQLDataSource. The SQL is
SELECT UserName, Category, ItemDescription, Size, Price, Reduce, Donate, Sold, ItemNumber, SoldDate, SoldPrice, PrintedFROM Tags WHERE (Printed = @Printed1 OR Printed = @Printed2 OR Printed = @Printed3) ORDER BY ItemNumber DESCThe bit field "printed" can be NULL, True or False.In the Selecting event of the SQLDataSource I have the following to show ALL records. But it does not work. If I remove these parameters it show ALL records.
e.Command.Parameters("@Printed1").Value = Nothing 'ASP.NET 2.0 using Visual basice.Command.Parameters("@Printed2").Value = Truee.Command.Parameters("@Printed3").Value = False
What am I doing wrong???
Thanks
Craig
I apologise if i have not posted this in the correct Topic before i start. But was uncertain where to post this query.
This is my first project in ASP.NET, MS Visual Web Developer 2005 Express and SQL Server 2005 Express. I have relatively little experience, so please bare with me.
I have managed to create a form that inserts data into a table and then inserts the Automatically Created Primary Key(as a foreign key) in another table. I have done this by inserting what is highlighted in red in the code of my InsertCommand below (Please scroll across to the end of the code):-InsertCommand="INSERT INTO [PrinterModel] ([Model], [PrinterMakeID], [CartridgeCode], [PartCode], [Duplex], [NIC], [Wireless], [Parallel], [USB], [Colour], [PrinterTypeID]) VALUES (@Model, @PrinterMakeID, @CartridgeCode, @PartCode, @Duplex, @NIC, @Wireless, @Parallel, @USB, @Colour, @PrinterTypeID) INSERT INTO [Model] ([PrinterModelID],[TypeID]) VALUES (@@IDENTITY, 3)" Can you see any problems that may arise from using this method. This project is an Asset Management System and will be used by no more than a handful of users. My Concern is the use of the @@IDENTITY (As it only stores the last Key used). Should I be using it here? If there is more than one user inserting into tables (Chances of this happening are very low), will the correct Primary key be insert to the table in the above code?Thank you for your comments.
I am trying to implement an "advanced search" feature on my ASP.NET 2.0 web form. I have a GridView control and a SqlDataSource. The SqlDataSource control successfully retrieves data when the SelectCommand attribute is set in the aspx page. I need to make it so when a user clicks on a button, it can take a value from a text box and use it in the WHERE clause. I have tried setting the SelectCommand programmatically and then DataBinding but it never accepts the new SelectCommand. What can I do to fix this?
View 5 Replies View RelatedHi - I'm using .net2, and have a gridview, populated by a SQL Datasource (Edit, Insert, Delete, Select).
Like we all used to do with the datagrid, I've added text boxes into the footer, and a link button, which I'd like to use to fire the Update command.
How do I get the link button to trigger the update command?
Thanks, Mark
I would like to introduce myself as ASP.Net 2.0 beginner. I face a problem when using gridview and sqldatasource.
View 1 Replies View RelatedHello all,I'm writing a site with one page that uses the session variable (User ID) to pick one user ID out of a comma separated list in the field Faculty. The default parameterized query designed in the SqlDataSource wizard only returns lines that contain an exact match:SELECT * FROM tStudents WHERE ([faculty] = @faculty) The query: SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') works as I need when I hard code the query with a specific user ID into the SqlDataSource in the aspx page. It will not work if I leave the @faculty parameter in it:SELECT * FROM tStudents WHERE ([faculty] LIKE '%@faculty%') e.Command.Parameters works to replace the @Faculty with a user ID, but again, adding the single quote and percentage sign either causes errors or returns no results. I've tried several variations of: string strEraiderID = "'%" + Session["eRaiderID"].ToString() + "%'"; e.Command.Parameters["@faculty"].Value = strEraiderID;no results are returned, not even the lines returned with the default select query.How do generate the equivalent of SELECT * FROM tStudents WHERE ([faculty] LIKE '%userID%') into the SqlDataSource? Thanks much!
View 3 Replies View RelatedIs there any way I can use a variable from my code behind file in the UpdateCommand of a sqlDataSource? I have tried
<%$ strUserGuid %>and<% strUserGuid %>
any help appreciated.Thanks
Dave
I have a gridview with a sqlDataSource with the SelectCommand as
"SELECT Movie.Title, Movie.Category, Movie.ReleaseDate, ItemForSale.Quantity, ItemForSale.HasUnLimitedQuantity FROM ItemForSale INNER JOIN Movie ON ItemForSale.ID = Movie.ID"
what kinda 'UpdateCommand' do I set so that ItemForSale is also updated from the grid? I tried two update statements seperated with a semicolon but that wouldn't work, any suggestions...
HiI'm using a simple SqlDataSource to connect to a stored proc to delete a number of rows from different tables.In my SQL im using: DECLARE @table1Count int
DELETE FROM Table1 WHERE id = @new_id
SET @table1Count=@@rowcount
SELECT @table1Count I'm then using an input box and linking it to the delete control parameter. Then on a button click event i'm running SqlDataSource1.Delete() which all works fine. But how do i get the @table1Count back into my aspx page? Thanks
Hello all,
Ok, I finally got my SqlDataSource working with Oracle once I found out what Oracle was looking for. My next hurdle is to try and set the Update Command and Parameters dynamically from a variable or radiobutton list. What I'm trying to accomplish is creating a hardware database for our computers by querying WMI and sending the info to textboxes for insertion and updating. I got that part all working nicely. Now I want to send the Computer name info to a different table column depending on if it is a laptop or desktop. I have been tossing around 2 ideas. A radiobutton list to select what it is and change the SQL parameters or do it by computer name since we have a unique identifier as the first letter ("W" for workstation, "L" for Laptop). I'm not sure what would be easiest but I'm still stuck on how this can be done. I posted this same question in here a few days ago, but I didn't have my SqlDataSources setup like I do now, I was using Dreamweaver 8, it is now ported to VS 2005. Below is my code, in bold is what I think needs to be changed dynamically, basically i need to change DESKTOP to LAPTOP...Thanks for all the help I've gotten from this forum already, I'm very new to ASP.NET and I couldn't do this without all the help. Thanks again!
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:CAT %>"ProviderName="<%$ ConnectionStrings:CAT.ProviderName %>" SelectCommand='SELECT * FROM "COMPUTER"' UpdateCommand="UPDATE COMPUTER SET DESKTOP = :DESKTOP, TECH = :TECH, SERVICE_TAG = :SERVICE_TAG WHERE USERNAME=:USERNAME">
<UpdateParameters>
<asp:ControlParameter Name="USERNAME" ControlId="txtUserName" PropertyName="Text"/>
<asp:ControlParameter Name="SERVICE_TAG" ControlId="txtServiceTag" PropertyName="Text"/>
<asp:ControlParameter Name="TECH" ControlId="txtTech" PropertyName="Text"/>
<asp:ControlParameter Name="DESKTOP" ControlId="txtComputerName" PropertyName="Text"/>
</UpdateParameters>
</asp:SqlDataSource>
Hi,
Hope you guys won't mind this rather newbie question. I'm writing a simple blog page for my website and have created a SqlDataSource which queries the database for a list of blog post titles (from the web.Blog table) and the number of comments (from the web.BlogComments table). The SqlDataSource control is:
<asp:SqlDataSource ID="sourceBlogArticles" ProviderName="System.Data.SqlClient" connectionString="<%$ ConnectionStrings:myDatabase %>" runat="server" SelectCommand="SELECT gb.blogID, gb.title, gb.description, gb.tags, gb.dateAdded, COUNT(gbc.blogID) AS noOfComments FROM web.Blog gb LEFT OUTER JOIN web.BlogComments gbc ON gb.blogID = gbc.blogID GROUP BY gb.blogID, gb.title, gb.description, gb.tags, gb.dateAdded ORDER BY gb.dateAdded"></asp:SqlDataSource>
This works perfectly well if each blog entry in the web.Blog table has associated comments in the web.BlogComments table. However, if there are no comments yet defined in the web.BlogComments table for that blogID then no row is returned in ASP.Net (as checked with a GridView control or similar linked to the data source to view what I get)
HOWEVER, I think the SELECT command IS correct: if I use the select command as a query in SQL Server Managment Studio Express, I do get the rows returned, with 0 for the number of comments which is what I would expect for that query:
blogID, title, description, tags, dateAdded, noOfComments
1, title 1, description for title 1, tag1, 2007-09-27 06:49:03.810, 32, title 2, description for title 2, tag2, 2007-09-27 06:49:37.513, 03, title 3, description for title3, tag3, 2007-10-02 18:21:30.467, 0
Can anyone help? The result from the SSMSE query is what I want, yet when I use the very same SELECT statement in my SqlDataSource I don't get any rows returned if the BlogComment count is zero (in the above example I get only the first row). Many thanks for any suggestions!
Hi,I am trying to write a method which needs to call a stored procedure and then needs to get the response of the stored procedure back to the variable i declared in the method. private string GetFromCode(string strWebVersionFromCode, string strWebVersionString) { //call stored procedure } strWebVersionFromCode = GetFromCode(strFromCode, "web_version"); // is the var which will store the response.how should I do this?Please assist.
View 3 Replies View RelatedHi,
I just have a Dataset with my tables and thats it
I have a grid view with several datas on it
no problem to get the data or insert but as soon as I try to delete or update some records the local machine through the same error
Unable to find nongeneric method...
I've try to create an Update query into my table adapters but still not working with this one
Also, try to remove the original_{0} and got the same error...
Please help if anyone has a solution
Thanks
Team:
How to invoke a stored procedure "out of process", meaning i want to add it to a queue.
Reason: we have a proc that is fired real-time each time an order comes into the system and it take a few seconds and when there is plenty of order activity in the system, the process times out. I would like to essentially add this to a queue and move on and some other process will process from the queue. Is CLR call the way to do? I know that the easiest way can be to add to a table and process from the table every 5 mins or something like that. Thoughts?
Thx
Sri
Hi!
I have developed DTS package for various tasks and scheduled to run some time. I have included SQL Mail task to notify me for each process when it fails. The questions is, When I open the package and execute from the menu, it works and it notifies me through SQL Mail task when it fails but when DTS package invokes at scheduled time and it got failed but it did not notify me that process in between has failed. It seems like SQL Mail task does not work when i schedule the package. Is there any one did come across this situation? or is there any way to resolve this issue? Any help would be appreciated!
Thanks,
Mohana
I want to creat an alert that will back up my database when the log files get to 90% full. When i try to create a new alert and select performance condition and select sqlserver:databases as the object then log file(s) Used size (kb) as the counter but when i go and select the instance i dont see my database in the drop down list but if I change to sql server event alert I see the database i want to use for this alert. I dont want to wait until the log is already full to back it up i want to do it when it hits a percent full. Is there a way to do this as a performance condition? thanks for your help!
View 7 Replies View RelatedFeeling really dumb tonight - below is my stored procedure and code behind which completes (it puts "completed" in TextBox4) but does not insert anything into database.
Questions:1) do in need to include the primary key field in the insert stored procedure?2) do I need a DataAdapter to actually get it running and open and close the connection? STORED PROCEDURE running on SQL 2000 server: ______________________________________
CREATE PROCEDURE newuser003.InsertCompanyInfo
@CS_CompanyName nchar(100),@CS_City nchar(500),@CS_Phone varchar(20)
AS
INSERT into tblCompanyInfo_Submit(CS_CompanyName, CS_City, CS_Phone)VALUES ('@CS_CompanyName', '@CS_City', '@CS_Phone')RETURN
C# CODE BEHIND: ______________________________________________________
public partial class ContractorSubmision : System.Web.UI.Page{ protected void Page_Load(object sender, EventArgs e) { } protected void Button1_Click(object sender, EventArgs e) { SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["localhomeexpoConnectionString2"].ConnectionString); SqlCommand cmd = new SqlCommand("CompanyInfoSubmit", con); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@CS_CompanyName", TextBox1.Text); cmd.Parameters.AddWithValue("@CS_City", TextBox2.Text); cmd.Parameters.AddWithValue("@CS_Phone", TextBox3.Text); TextBox4.Text = "Completed"; }}
I have a DTS Package to populate data from excel sheet to direct simple table. I like to call this DTS from User interface. thanks in advance
View 2 Replies View RelatedHi Guys,
Anyone can tell me, How to invoke ssis package as webservice ?
Is it possible ? If yes How ?
Yogesh V. Desai. | SQLDBA|