[help] How Do I Have Asp.net Kick Off An SSIS Package On A Different Server?
May 30, 2007
Hello, I was wondering if someone can help me with an ASP.NET question. We have been having troubles with our web server, and I don't know where else to turn.
We are running an asp.net (vb.net) with IIS on our Web Server.
We are running Sql Server 2005 / SSIS on our Database Server.
SQL Server and IIS are running on separate machines. This is by design.
We are trying to get our Asp.net to kick off an SSIS package, but we are unable to do this since the software is on separate servers.
(If both are installed on the web server, we can directly call the SSIS package. If both are installed on the Database Server, we can implement a web service on the Database Server, and call that web service from the Web Server.)
Thank you,
~Le
View 3 Replies
ADVERTISEMENT
Jun 30, 2004
Is it possible to execute a DTS Package from ASP?
For example, if a user went to my website and clicked a button, it'd execute the DTS package? Thanks.
View 4 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
May 27, 2003
I have a SQL Server 2000 that is used in a web application. It has IIS5 on it and SQL 2000 SP3. I need to make a change to one of the DTS packages. It needs to remap some of the columns in transformations for an export to a text file. Anytime I click on the "create columns for mapping button, it kicks me completely out of SQL Sever. Tried to create a separate package to complete just this step and same thing happens. Reapplied sp3 , still same results. Tried both SQL , sa and winnt admin accounts, still a problem. Anyone seen this before?
View 3 Replies
View Related
Mar 7, 2003
I'm looking to run something outside of the agent that will determine whether or not the backup ran. I will probably create a sp and run it from the command line as a scheduled job. However, I'm having a little trouble when it comes time to compare the max(run_date) from the sysjobhistory table in msdb with the current date. The info is stored in sysjobhistory as an int (for example, July 6, 2002 is stored as 20020706). I can run a datepart command on the getdate function to get something like this 200276. These dates of course are the same, but naturally they do not equal each other through a comparison (I'm converting both to varchar for the compare). Is there any formatting that could get me 20020706 from my datepart command - or is there a better way of doing this altogether?
View 2 Replies
View Related
Jul 25, 2006
Greetings,
I have a procedure that gathers a data set for a given date range. I then loop through the temp table and build comma delimited text files for each "group" There could be 10 or there could be 1000 files and i will never know the file names until they are actually created. These files gets placed in a zip file and mailed to the specified recipients. This all works just fine.
However, this data is intended to be imported to another application that expects an Excel format and it will not settle for calling the files *.XLS. It knows that they are just comma delimited text files and freaks out. I'm looking for some easy way to create these files the proper way so this application will accept them. If it was just a single file in question I wouldn't care but since there can be so many it could be very time consuming for a user to open Excel, manipulate the file (remember, there may be 10 and there may be 1000), save it, etc. Why use a computer at all if so much manual intervention is required?
Anyone have any suggestions? I've looked in to DTS but I'm not sure it will work because as I've said, I won't knwo the names of the files until all the data is gathered and they are built blah blah blah.
View 8 Replies
View Related
Aug 1, 2006
Is there a T-SQL command to kick all users out of a database while I run an update?
One other thing, and this is probably a network issue, is there any way to pass a message to the users prior to kicking them out, so they can complete what they were doing?
Thanks
Melt
View 7 Replies
View Related
Jul 22, 1999
Can I kick off a VB.exe in SQL Server 6.5?
TIA,
Stella
View 1 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Aug 15, 2006
Hi There,
I have sqlserver agent running with a windows user account which is member of administrator group. I try to set up the job to run an ssis package and set up to run as sql server agent service account. For some reason, the job fails and it doesn't give much error info if I look at job History. Can somebody plzz help me? I am unable to understand what extra permissions must that user have to run the ssis package as a sql job? And how do I configure the job to give more error details?
Any suggestions are greatly appreciated.
Thanks.
View 1 Replies
View Related
Mar 31, 2008
Hi All, I am new to SSIS and SQL Server. I have a development copy of SQL Server 2005 on my desktop, and have just completed my first SSIS package, which replaces an Access appplication that I have on our server. Now I want to move my package to one of our live SQL Server 2005 instalations on our Network. Is there an easy way to move the work I have done on my Development version? I guess that I will need to sort out security etc, but I am hoping not to have to re key everything I have done so far.
Regards
ADG
View 3 Replies
View Related
Apr 10, 2007
Dear All,
I'm using SSIS package to extract text file, and load into SQL Server. I test the SSIS package import manually, it works. Then I'm using SQL Server Agent to set up schedule. According to the log, the job agent work at the scheduled time, yet job agent throw out the error message.
Message1:
The job failed. The Job was invoked by User sysAdmin. The last step to run was step 1 (Extract Data).
Message2:
Executed as user: SQLSERVERsysAdmin. The package could not be loaded. The step failed.
Now I only have 1 step and set up "on success action" then "quite the reporting success". Any clue? Thanks
will
View 11 Replies
View Related
Apr 3, 2008
Hi,
I have created the package in ssis and i want to schedule it local machine without using integration services. Any workaround for scheduling the Package?.
Specify me the steps to configure the package.
Thanks
Regards
Ramesh.R
View 5 Replies
View Related
Feb 28, 2006
Hi,
I have a package that I developed on my local machine and runs well. I run
it through the command line on my production server the following way:
D: estCMS_MoveContentToLive>dtexec /f
D: estCMS_MoveContentToLiveCMSMoveIte
mToLive.dtsx -de
The -de option is because i changed the default security protection level of
the package as BOL says that for the default protection level
(EncryptAllWithUserKey): "Only the user who created or exported the package
can open the package in SSIS Designer or run the package by using the dtexec
command prompt utility."
The problem is that the package does not run successfully and vomits a lot
of error message that I do not understand, such as:
<errorMessage>
Error: 2006-02-15 18:13:43.55
Code: 0xC004706E
Source: Data Flow Task DTS.Pipeline
Description: The module containing "component "Multicast" (637)" cannot
be lo
cated, even though it is registered.
End Error
Error: 2006-02-15 18:13:43.55
Code: 0xC004706E
Source: Data Flow Task DTS.Pipeline
Description: The module containing "component "OLE DB Destination" (756)"
can
not be located, even though it is registered.
End Error
...
Error: 2006-02-15 18:13:43.62
Code: 0xC0048021
Source: Data Flow Task Multicast [637]
Description: The component is missing, not registered, not upgradeable,
or mi
ssing required interfaces. The contact information for this component is
"Multic
ast;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft
Corporation
; All Rights Reserved; http://www.microsoft.com/sql/support;0".
End Error
Error: 2006-02-15 18:13:43.62
Code: 0xC0047017
Source: Data Flow Task DTS.Pipeline
Description: component "Multicast" (637) failed validation and returned
error
code 0xC0048021.
End Error
</errorMessage>
Notice that at the end it says that the validation failed.
I looked on the internet but I did not found any information regarding this
issue.
I also created a dummy SSIS package that does not have any data flaw but
just have a single SQL task doing a single insert in a table. When i
execute it on the production server, it runs successfully!
Then what is wrong with my "complex" package that all the data flow
components seems to: "can not be located, even though it is registered." ???
To be exact, I have an error for all the data flow components except the
script component.
Thanks for any help.
Best regards,
Francois Malgreve
PS:
I also would like to mention that on my production server, only the SSIS
service is installed, not SQL Server itself.
When you run the setup of SQL 2005, it is indeed possible to install only
the SSIS component which is what I need in my case as SSIS packages are run
from a middle tier server and connect to various DBs.
I think this is important as I just discovered that the package can run
successfully when I run it on a server which has a full version of SQL
Server 2005. By that I mean having SQL Database Server + SSIS installed. But it will run only from the command line, if i run it from an asp.net application it won't run successfully and return the same kind of error i showed in this message. in a desesparate attempt to solve my problem, I granted more rights to the ASPNET user and NETWORK_SERVICE user by adding them in the administrator group as I quite believe it might be related to security as on that server it works well from the command line. But it did not help.
View 1 Replies
View Related
Jul 18, 2006
Hi everyone,
Just a question, generally speaking, when you€™re going to save a dtsx package, what are the main differences between SSIS Package Store and Sql Server?
-When you choose ssis package store option you can save the package in:
/MSDB/Maintenance Plans/ mypackage (it saves to sysdtspackges90)
/File System/mypackage (are we asuming that sql is going to save it on the folder where .dtproj project file is?)
-When you choose sql server option:
/Maintenance Plans/mypackage (it saves to sysdtspackges90)
Thanks for your comments.
View 5 Replies
View Related
Nov 1, 2007
I have a SSIS package that runs fine when I execute it in visual studio but when I run it on the server as a job it fails. This is nothing to do with protection levels etc as the job is running. It fails part way through with this as the error log
Started: 2:42:48 PM
Progress: 2007-11-01 14:43:04.16 Source: Import Hon File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.16 Source: Import Hon File Validating: 50% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Hon File Validating: 100% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 50% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import Med File Validating: 100% complete End Progress
Progress: 2007-11-01 14:43:04.22 Source: Import MedFac File Validating: 0% complete End Progress
Progress: 2007-11-01 14:43:04.22 Sour... Process Exit Code 1. The step failed.
It is failing on the last file it is trying to import but it works OK on my PC.
Can anyone give me any pointers on what might be causing this.
Thanks
View 5 Replies
View Related
Apr 9, 2007
Hi Everyone:
I would like to find out, if there is something I can implement/or should I need to implement to avoid running two concurrent processes of 1 SSIS Package. I mean by default, I will schedule the SSIS package to run utilizing SQL Server Agent. But How I avoid/prevent it to run concurrently or what do I need to setup where I only allow 1 instance of my package to run. Thanks.
View 10 Replies
View Related
May 10, 2007
So now ive got a ssis project that works and does what i need it to. How do I save the package into sql server ?
View 4 Replies
View Related
Feb 18, 2008
I've build the deployment manifest of my ssis package, and installed it on the sql server machine, now, how do i run this packege on sql server 2005?
View 1 Replies
View Related
Apr 5, 2007
Dear All,
My SSIS package is "Extract" data from Oracle and Load into SQL Server.
The SSIS package does not run when I call the SSIS package from a SQL Server Agent job step
I have gone through all the steps in the doc http://support.microsoft.com/kb/918760, but it still doesn't work.
Is it because of connection to "Oracle" database? and SQL Server Agent service could not recognise the Authentication information to Oracle?
Why I am saying this is becuase it works if I change the package to "Extract" data only from SQL Server.
Anyone has experience on this problem?
Many Thanks in Advance
John
View 11 Replies
View Related
Jun 29, 2006
hi !
I was able to run the PAckage successfully under local server. but when i deployed to another server and tried to run it fails.
When i run through the command line in another server -
I also tried running under File system and through Agent
Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
The configuration file name "D:Program FilesMicrosoft SQL Serv
er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid.
Check the configuration file name.
It does not execute the pacakge itself
When i run the package from my machine it executes the pacakge but fails at the end saying
The configuration file name "D:Program FilesMicrosoft SQL Serv
er90DTSPackagesTahoe Archiving ProjectEnvironment.dtsConfig" is not valid.
Check the configuration file name.
Any help!!
Thanks,
Jasmine
View 1 Replies
View Related
Apr 6, 2006
Hi,
I have created a simple SSIS package in a 32-bit server and I'm able to execute it using dtexec command in the same server.I copied this package to the 64-bit machine and when try to execute the pacakge using dtexec /f <package path> ,it is giving me the following error
"The connection manager "10.101.24.230.master 1" will not acquire
a connection because the package OfflineMode property is TRUE. When the Offline
Mode is TRUE, connections cannot be acquired."
But in SSIS designer OfflineMode property for the package is by default set only to false but still I get this error in 64-bit.
Any help in this regard would be appreciated.
Thanks
SG
View 1 Replies
View Related
May 6, 2008
I am using package configurations to hold an email address. I can happily change the email adress when teh config is in an XML file, but when I choose SQL Server to store the package configurations I can change the email address but the changes are not picked up despite coming out of dev studio and back in again - it picks up the default set on the variables tab.
It simply refuses to pick up the email address from the SQL table, but happily creates the dbo.[SSIS Configurations] table with correct entries in the wizard 1st time round.
Any ideas what I am doing wrong ?
View 10 Replies
View Related
Aug 6, 2007
Ok, I created SSIS packages on my local box. All of my packages are using config files for the db connections and other configurations that'll be changed per environment. My question is how do I deploy the .dstx file and the associated config file to the servers?
Right now I'm running the packages in BIDS as I create them. I now want to run them on an actual server
View 4 Replies
View Related
Jul 7, 2015
I have two calls to stored procedures that in an SSIS package fails silently. They are simply not executed in production but works fine in test, nothing happens and the sql server agent reports that everything has gone just fine.
In test they have 1 server with db A and B. No issue here.
In prod they have 2 servers with db A and B. On server 1 sql server agent executes a job that includes an SSIS package that on server 2 runs a couple of sp's. That user is db owner on server 2 db B and yet nothing happens. The sp's are not executed.
If I in prod run the job manually then it works, but not when run with the sql server agent account that as said is even db owner.
View 2 Replies
View Related
Dec 20, 2007
Sql server agent is running under a domain account that is a member of administrators and domain users amongst others, and the package is executed as the service account. Connecting to servers on the same domain works and when I run it from the msdb package store in ssis (ssis runs under the network service account ...) it will connect to the pop server as well. Permissions, fiddly proxies .. the answer's out there somewhere
View 3 Replies
View Related
Jan 16, 2008
can any one tell me the sql server 2005job schedules,ssis packages
View 1 Replies
View Related
Sep 11, 2015
SQL Server 2008 and user connecting with SSIS.How can I trace this user's activity? When I try I do not get the sql they are running. I know their package is pulling data. I assume this is because the code is 'complied' and not really running straight sql type code.
I have looked online and found that there are settings that need to be set in the package for the trace to be able to work as expected.how can I get what the SSIS package is doing if I don't have any control over the package?
View 9 Replies
View Related
Mar 31, 2007
Hi,
We are migrating our production environment from 32-bit SQL Server 2005, Windows 2003 server to 64-bit SQL Server 2005, Windows 2003 server environment with 4GB of RAM. We have recompiled the SSIS packages to run in 64-bit mode and stored them in database. But one of the package fails with initial information as
Information: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 34720 buffers were considered and 34720 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
And the subsequent error messages received as
Error Message 1
A buffer could not be locked. The system is out of memory or the buffer manager has reached its quota.
Error Message 2
An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.".
Please guide us in troubleshooting this issue.
Thanks & Regards
Amit
View 21 Replies
View Related
Jun 14, 2005
I am getting strange error on deploying ssis package to SQL Server.
View 10 Replies
View Related
Oct 19, 2007
Hello!
I´m currently developing an import/export package in SSIS. I recently realized that this package is supposed to be run on a SQL Server 2000 instance, and I have no clue if this will work...
I´m pretty new to SQL Server, but I now that DTS from 2000 ws replaced by SSIS in 2005,
and the command-line dtsrun replaced by dtexec.
So my question: Will I be able to run a SSIS package on SQL Server 2000, and how would I do that?
Regards,
Daniel
View 3 Replies
View Related
