Insert Records Using Sub-query
Apr 1, 2015
Create a new table named frequent travelers (FreqTrav). It will only store passengers who have taken more than 2 trips with the company. It will record the passenger name, passenger number, address, phone number, total trips and total fare paid. Show your CREATE TABLE query and INSERT query. Please insert the records using subquery (i.e. insert from a SELECT query).
CREATE TABLE FreqTrav (
PASSENGERNUM INT(20)
CHECK (PASSENGERNUM IN
[code]...
but It's not working for me since I tried inserting a passengernum who did't travel more than two times and it was inserted.Is there any way I can answer without using check constraint.
View 3 Replies
ADVERTISEMENT
Jul 31, 2014
I have a query to insert records into a table based on a request but the query can only read one record at a time. How do i change the query such that it is able to read multiple records. In the below query i was able to input only 1 request which is 149906.
Query
declare @num_of_times int
declare @Count INT
DECLARE @newrequestid varchar(50)
DECLARE @Frequency VARCHAR(25), @RequestId INT, @x INT, @Max INT, @RptDesc INT
SET @RequestId = 149906
SET @x = 1
[Code] ....
View 1 Replies
View Related
Nov 23, 2015
I have a source table #source with columns 'source', 'patientcode' ,'patientdesc' and it has 4 records as below
source patientcode patientdesc
canada abc patient1
canada efg patient2
canada hij patient3
canada klm patient4
I have a target table and it has 2 records as below.
source prefix tgt_patientcode tgt_patientdesc
canada cn abc patient1
canada cn efg patient2
Now, I want to merge the source data with target table -that means, if the records are already avaible in target, then ignore and if it does not available then INSERT.
This is the query i used but new records are not getting inserted.
MERGE #target T
USING #source S
ON S.SOURCE=T.Source
WHEN NOT MATCHED BY TARGET THEN
INSERT ( Source, Prefix ,tgt_patientcode ,tgt_patientdesc)
VALUES ('Canada' , 'cn' , s.patientcode, s.patientcode);
I want the output as below
source prefix tgt_patientcode tgt_patientdesc
canada cn abc patient1
canada cn efg patient2
canada cn hij patient3
canada cn klm patient4
DDL as below :
create table #target (source varchar(100),prefix varchar(2),tgt_patientcode varchar(100),tgt_patientdesc varchar(100))
insert into #target values ('canada','cn','abc','patient1')
insert into #target values ('canada','cn','efg','patient2')
[Code] ....
View 2 Replies
View Related
Mar 20, 2014
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
View 0 Replies
View Related
Aug 6, 2007
HI,
I have been trying to solve the locking problem from past couple of days. Please help mee!!
Scenario:
--------------
I have a SSIS package in which 2 data flow tasks. 1st data flow task deletes records from a 5 tables and the 2nd data flow task should insert records into 1 of the five tables after the success of 1st data flow task. This scenario runs in Transacation.
The above scenrio in the 2nd data flow task hangs in runtime. It does not complete. with sp_who2 command i could see that there is an intent share lock(LK_M_IS) on the table and the status is SUSPENDED.
I dont know how to come out of this locking. Please help.
Thanks ,
Sunil
View 7 Replies
View Related
Nov 28, 2005
I tried to port 10000 records using DTS. After porting of 9900 records I got an error and comes out without any result. But I want to keep the records which has been ported till the error occured. Plz help me.
View 1 Replies
View Related
Apr 20, 2008
On my site users can register using ASP Membership Create user Wizard control.
I am also using the wizard control to design a simple question and answer form that logged in users have access to.
it has 2 questions including a text box for Q1 and dropdown list for Q2.
I have a table in my database called "Players" which has 3 Columns
UserId Primary Key of type Unique Identifyer
PlayerName Type String
PlayerGenre Type Sting
On completing the wizard and clicking the finish button, I want the data to be inserted into the SQl express Players table.
I am having problems getting this to work and keep getting exceptions.
Be very helpful if somebody could check the code and advise where the problem is??
<asp:Wizard ID="Wizard1" runat="server" BackColor="#F7F6F3"
BorderColor="#CCCCCC" BorderStyle="Solid" BorderWidth="1px"
DisplaySideBar="False" Font-Names="Verdana" Font-Size="0.8em" Height="354px"
onfinishbuttonclick="Wizard1_FinishButtonClick" Width="631px">
<SideBarTemplate>
<asp:DataList ID="SideBarList" runat="server">
<ItemTemplate>
<asp:LinkButton ID="SideBarButton" runat="server" BorderWidth="0px"
Font-Names="Verdana" ForeColor="White"></asp:LinkButton>
</ItemTemplate>
<SelectedItemStyle Font-Bold="True" />
</asp:DataList>
</SideBarTemplate>
<StepStyle BackColor="#669999" BorderWidth="0px" ForeColor="#5D7B9D" />
<NavigationStyle VerticalAlign="Top" />
<WizardSteps>
<asp:WizardStep runat="server">
<table class="style1">
<tr>
<td class="style4">
A<span class="style6">Player Name</span></td>
<td class="style3">
<asp:TextBox ID="PlayerName" runat="server"></asp:TextBox>
</td>
<td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"
ControlToValidate="PlayerName" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
<tr>
<td class="style5">
<td class="style3">
<asp:DropDownList ID="PlayerGenre" runat="server" Width="128px">
<asp:ListItem Value="-1">Select Genre</asp:ListItem>
<asp:ListItem>Male</asp:ListItem>
<asp:ListItem>Female</asp:ListItem>
</asp:DropDownList>
</td>
<asp:RequiredFieldValidator ID="RequiredFieldValidator2" runat="server"
ControlToValidate="PlayerGenre" ErrorMessage="RequiredFieldValidator"></asp:RequiredFieldValidator>
</td>
</tr>
</table>
Sql Data Source
<asp:SqlDataSource ID="InsertArtist1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" InsertCommand="INSERT INTO [Playerst] ([UserId], [PlayerName], [PlayerGenre]) VALUES (@UserId, @PlayerName, @PlayerGenre)"
ProviderName="<%$ ConnectionStrings:ConnectionString.ProviderName %>">
<InsertParameters>
<asp:Parameter Name="UserId" Type="Object" />
<asp:Parameter Name="PlayerName" Type="String" />
<asp:Parameter Name="PlayerGenre" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</asp:WizardStep>
Event Handler
To match the answers to the user I get the UserId and insert this into the database to.protected void Wizard1_FinishButtonClick(object sender, WizardNavigationEventArgs e)
{
SqlDataSource DataSource = (SqlDataSource)Wizard1.FindControl("InsertArtist1");
MembershipUser myUser = Membership.GetUser(this.User.Identity.Name);
Guid UserId = (Guid)myUser.ProviderUserKey;String Gender = ((DropDownList)Wizard1.FindControl("PlayerGenre")).SelectedValue;
DataSource.InsertParameters.Add("UserId", UserId.ToString());DataSource.InsertParameters.Add("PlayerGenre", Gender.ToString());
DataSource.Insert();
}
View 1 Replies
View Related
Jan 18, 2008
I have a query similar to the following. The intent of this query is to retrieve the top 6 records meeting the specified criteria (LOGTYPENAME = 'Process Status Start' OR LOGTYPENAME = 'Process Status End' ) based on most recent dates. Please keep in mind that I expect to return up to 6 records for each unique LogProcessName. This could be thousands of different LogProcessNames with up to 6 records for each.
1) The table I am executing against currently is very large in size and thus takes a long time to execute against. It would seem there must be a more efficient query to get the results I am looking for?
2) CTE doesn't work on SQL 2000. I need a query that does.
3) I cannot modify the database itself in the process.
;WITH cte AS (
SELECT [LogProcessName], [LogBody], [LogDate], [LogGUID], row_number()
OVER(PARTITION BY [LogProcessName]
ORDER BY [LogDate] DESC)
AS RN
FROM [LOGTABLE]
WHERE [LogTypeGUID] IN (
SELECT LogTypeGUID
FROM LOGTYPE
WHERE LogTypeName = 'Process Status Start'
OR LogTypeName = 'Process Status End' ) )
SELECT *
FROM cte
WHERE RN = 1 OR RN = 2 OR RN = 3 OR RN = 4 OR RN = 5 OR RN = 6
ORDER BY [LogProcessName] DESC, [LogDate] DESC
Does anybody else have any idea that would yield the results that I am looking for and take into account items 1-3 above?
Thanks in advance.
View 4 Replies
View Related
Jul 31, 2002
Sir,
I. which one is better sir amoung the 2 ?
1. Inserting records from front end using begin trans ... commit trans
2. By using stored procedures ? - Is there any begin trans .. commit
trans in stored procedure ? If so how to use it.
please give your valuable suggestions.
View 1 Replies
View Related
Mar 4, 2008
Hello,
I am trying to insert 200 records on a table that has two fields:
TagID and Name. TagID is a Unique Identifier and is not generated in the table. I created some code but is not working and I am a little bit confused:
declare@i integer
select @i = 1
while @i <= 800
begin
insert into Tags (TagID, [name])
values(newid(), select ('Tag ' + right('000' + convert(varchar(3), @i), 3)))
select@i = @i + 1
end
Could someone tell me how to solve this?
Thanks,
Miguel
View 4 Replies
View Related
Mar 18, 2008
Hi , I have datatable which have atleast ten records . i want to insert these records at once in sql server 2000 when user clicks save button.
please send me the code for procedure and code for sending bulk of data at once from asp.net form
View 1 Replies
View Related
Jan 27, 2006
I am currently working on a simple page to insert 1.6 million UK postcode records into an SQL server table. The table has three columns for the postcode, longditude coordinate and lattitude coordinate. The data is sourced from a pipe (|) delimited txt file and inserted into the database using a FOR loop. The problem I have is that the page will hang after inserting only 10,000 records, the page displays either an invalid View State error or a page cannot be found error.
Now I assume the viewstate error stems from the fact that there is a form on the page which simply contains a button to execute the script and a few labels to show the progress. But without the form and associated viewstate the insert still fails to complete.... any ideas?? Would I be better running this on a thread or should I just do it in stages and be patient. I have now modified the page to read the database on load and pick up from where it crashes?
View 2 Replies
View Related
Jul 1, 2004
Once again - My table should consist of 100 new records for a field MobilePhone(of char type) and last 5 digits should be randomly choosed (should be like this: +381randomno1randomno2.. etc.(example: +38156465, where '+' sign makes it char type and digits after +381 are randomly choosed. :confused: Anyone knows how to solve this....PLEASE?
View 3 Replies
View Related
Feb 4, 2008
Good day to all, I am new here so i hope i am doing things correctly.
The Company i work for make coils of shaped wire and work a 6 - 6 shift pattern
I have a database that is updated from a data collection source (MS Access) at 06:00 every morning. This seems to be working ok, my problem is that most coils fit nicely into the 6 - 6 shift pattern, but some now and again drift over into the next shift. I have written a crystal report that picks up this data. at the moment the coils are put in the database as: [Coil Start Time], [Coil Finish Time], [Coil Start Weight], [Coil Finish Weight], etc.
I have written (been helped to write) a SQL statement that will do the following:
Step 1: If the Coil Finish time is greater than the shift end time, then set the shit end time to be coil end time and zero start and finish wheight.
Step 2: The original Coil record is duplicated and Coil Start time set to start time of shift, all other data left alone.
Example of code:
-->>
SELECT [Batch Name], [Batch Start], [Batch End], [Coil Start Weight], [Coil Finish Weight], [Product], [Shift], [Operator ID], [Works Order No]
FROM dbo.tblCoilData
WHERE (DATEPART(hour, [Batch Start]) >= 6 AND DATEPART(hour, [Batch End]) < 18) OR
((DATEPART(hour, [Batch Start]) < 6 OR
DATEPART(hour, [Batch Start]) >= 18) AND (DATEPART(hour, [Batch End]) < 6 OR
DATEPART(hour, [Batch End]) >= 18))
UNION ALL
SELECT [Batch Name], [Batch Start], DATEADD(hour, 17, DATEADD(minute, 59, CONVERT(char(10), [Batch End], 101))), 0, 0, [Product], [Shift], [Operator ID],
[Works Order No]
FROM dbo.tblCoilData
WHERE DATEPART(hour, [Batch Start]) >= 6 AND DATEPART(hour, [Batch Start]) < 18 AND (DATEPART(hour, [Batch End]) < 6 OR
DATEPART(hour, [Batch End]) >= 18)
UNION ALL
SELECT [Batch Name], DATEADD(hour, 18, CONVERT(char(10), [Batch Start], 101)), [Batch End], [Coil Start Weight], [Coil Finish Weight], [Product], [Shift],
[Operator ID], [Works Order No]
FROM dbo.tblCoilData
WHERE DATEPART(hour, [Batch Start]) >= 6 AND DATEPART(hour, [Batch Start]) < 18 AND (DATEPART(hour, [Batch End]) < 6 OR
DATEPART(hour, [Batch End]) >= 18)
UNION ALL
SELECT [Batch Name], [Batch Start], DATEADD(hour, 5, DATEADD(minute, 59, CONVERT(char(10), [Batch End], 101))), 0, 0, [Product], [Shift], [Operator ID],
[Works Order No]
FROM dbo.tblCoilData
WHERE (DATEPART(hour, [Batch Start]) < 6 OR
DATEPART(hour, [Batch Start]) >= 18) AND DATEPART(hour, [Batch End]) >= 6 AND DATEPART(hour, [Batch End]) < 18
UNION ALL
SELECT [Batch Name], DATEADD(hour, 6, CONVERT(char(10), [Batch Start], 101)), [Batch End], [Coil Start Weight], [Coil Finish Weight], [Product], [Shift],
[Operator ID], [Works Order No]
FROM dbo.tblCoilData
WHERE (DATEPART(hour, [Batch Start]) < 6 OR
DATEPART(hour, [Batch Start]) >= 18) AND DATEPART(hour, [Batch End]) >= 6 AND DATEPART(hour, [Batch End]) < 18
<<--
I have 2 options now
option 1:
Leave this as a SQL View and report from this
option 2:
Insert updated records to the tblCoilData table so that the data in the table is permanent
I would prefer option 2 but am a bit of a nugget when it comes to writing update / insert statements, Could someone please help me with this
Thank you very kindly
Regards
Steve Dyson
View 4 Replies
View Related
Apr 3, 2008
Guys
I have got a table with 42 lakh records.
I am trying to insert into the target table by using select
and using like keyword. It is inserting records randomly. But need to insert records in sequence which should be ordered by. The problem here Iam not able to use order by because of 42 lakh records. Any possible solution for this is appreciated.
Following is the example.
-------
insert into target table
select * from test_policy
where policynumb like '[cdklnqtswxyabeghjmpr1z]%'
this statment is used in the stored procedure
these records should be sorted out while insertion. But it is inserting randomly.
thanks in advance
View 8 Replies
View Related
Jul 14, 2014
I have a table that holds Customer Part numbers.
Cus_no item_no
100 ABC
100 XYZ
200 ABC
300 XYZ
Looking at the data above. I want look at customer 100 and insert all of customer 100's records where other customers do not match.
Table name ItemCust
After running my script I would expect my data to look like:
Cus_no item_no
100 ABC
100 XYZ
200 ABC
200 XYZ
300 ABC
300 XYZ
View 3 Replies
View Related
Jul 23, 2005
I have a problem. The project that I'm working on requires me to duplicaterecords. As in a series of records are entered into the system the user thenclick on a button to make these as 'Templates' so that they would not haveto re-enter alot of the information. So from a db perspective I would haveto re-insert these records into the database. The problem is there're over20 tables and the relationship is complex. Is there a way to copy the parentthe record and have sqlserver automatically cascade and re-insert allrelated and referenced records back into the database ?or is there a easy way to do this ?ThanksTom
View 2 Replies
View Related
Jul 29, 2006
Dear All,
I want to use SSIS in order to synchronize data. The OLEDB and ADO.NET Destination Adapter just inserts the rows read from the source. Since I have PK Constraint on destination, the tranform fails. How can I ask to update the records in destination DB?
Regards,
Sassan
View 4 Replies
View Related
Feb 14, 2006
Greetings from a SSIS newbie still on the learning curve...
I have a SQL query OLE DB Source that yields a result set that I'd like to put into a SQL Server Destination, but only those records that don't already exist in the destination.
Is there a recommended (read: easy) way to accomplish this? Perhaps a handy transformation?
I have tried to incorporate a subquery in my source query along the lines of:
SELECT fields FROM table1 WHERE keyfield NOT IN (SELECT keyfield from table2)
which works in design time but fails at the server with a cryptic:
"Error: Unable to prepare the SSIS bulk insert for data insertion."
and
"Error: component "<component>" (16) failed the pre-execute phase and returned error code 0xC0202071."
Don't mean for that to cloud the issue, though. I would appreciate any help given.
Thanks!
Paul
View 6 Replies
View Related
Feb 7, 2008
Hi guys,
Help me to write my query,
I want to write a insert statement but before insert statement run i need to check a condition like if the same record is already existing or not ? how do i do this using transact -SQL
I mean i have a table call Employee like this definition
ColumnName Datatype
EmployeeID INT
Name Varchar(255)
Records like this
EmployeeID Name
1 John E Mathew
2 Ethel Elizabeth
Ok Before i insert a new record , i need to check if a emplyee name call ="John E Mathew" already in the table or not if Employee Name call ='John E Mathew' not exisits only it should execute my insert statement .
how do i write my SQL ?
regards
suis
View 9 Replies
View Related
Aug 29, 2006
I have searched in length and cant seem to find a specific answer.I have a tmptable to hold user "shoppingcart" ( internal supplies)What i want is to take when the user clicks order to take that table pull the records with that user and populate the order and order details tablesThe order table has a PK of orderID and the orderdetails has a FK of orderIDI know how to insert to the main table, but dont know how to populate the details at the same timeI have this.Insert into supplyordersselect requestor from tmpordercart where requestor = &name so how do i also take from the tmpordercart the itemno and quanity and put them into the orderdetails so that it links back to order table?
View 1 Replies
View Related
Nov 28, 2006
i created a simple table to record all uploaded files to my website. now, it works, but the problem is, it posts to the table 2 times, as in it executes "Button1_Click" event twice. The result is i get two records which are the same, and only differs in primary key (because i set it as an autonumber). how do i fix this? thanks in advance
here's the code:
HTML: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConflictDetection="CompareAllValues"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
InsertCommand="INSERT INTO [Base_Files] ([User_ID], [Date_Posted], [File_Type], [File_Size], [File_Name], [File_Description]) VALUES (@User_ID, @Date_Posted, @File_Type, @File_Size, @File_Name, @File_Description)">
<InsertParameters>
<asp:Parameter Name="User_ID" />
<asp:Parameter Name="Date_Posted" />
<asp:Parameter Name="File_Type" />
<asp:Parameter Name="File_Size" />
<asp:Parameter Name="File_Name" />
<asp:Parameter Name="File_Description" />
</InsertParameters>
</asp:SqlDataSource>
VB:Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click
If FileUpLoad1.HasFile Then FileUpLoad1.SaveAs(Server.MapPath(".") & "files" & FileUpLoad1.FileName)
Label1.Text = "Received <strong>" & FileUpLoad1.FileName & "</strong> Content Type: " & FileUpLoad1.PostedFile.ContentType & ", Length: " & FileUpLoad1.PostedFile.ContentLength & "bytes, at " & Date.Now.ToString("MMM dd, yyyy, h:mmtt")
SqlDataSource1.InsertParameters("File_Name").DefaultValue = FileUpLoad1.FileName.ToString()
SqlDataSource1.InsertParameters("User_ID").DefaultValue = User.Identity.Name.ToString()
SqlDataSource1.InsertParameters("File_Type").DefaultValue = FileUpLoad1.PostedFile.ContentType
SqlDataSource1.InsertParameters("File_Size").DefaultValue = FileUpLoad1.PostedFile.ContentLength
SqlDataSource1.InsertParameters("File_Description").DefaultValue = txtDescription.Text.ToString()
SqlDataSource1.InsertParameters("Date_Posted").DefaultValue = Date.Now.ToString("MMM dd, yyyy, h:mmtt")
SqlDataSource1.Insert()
Else
Label1.Text = "No uploaded file"
End If
End Sub
View 1 Replies
View Related
Oct 11, 2007
insert into table1 (colname) values (value1)
can only insert one record into the table. How to insert multiple records as value1, value2, value3... into a table?
We can of course use the above repeatedly, but if I don't know how many records (which is a variable), and I want to write a code which just take
value1, value2, value3 ....
from the clipboard, to paste as a input. How to insert those multiple records into table without split it. Thanks
View 5 Replies
View Related
Nov 13, 2007
Hi, I am having three text box which accepts user data & insert that in sql database. But I am not able to do this , I think this is the simplest of all . Can somebody plz tell me how this can be done from scratch that is connection string & settings in web.config ? Plz guide using C#ThanksRegards,-Sunny,
View 18 Replies
View Related
Nov 14, 2007
I'm writing a program that allows users to upload a csv file. This file is then seperated into 4 datatables based on certain criteria then each datatable is uploaded into my database. I'm essentially adding new rows to the datatables then running an update command on each using a tableadapter. The problem is that these csv files can be large and can end up with 4000+ new records being added to the database and the update commands take a while to do it. I've sat for about five minutes on one run while it updated. I put in some time variable to see where all the time is spent and it takes only seconds to parse the data and seperate into the datatables, but minutes on the update commands. Is there a more efficient way to insert this much data?
View 4 Replies
View Related
Mar 27, 2008
I have web site when people orders through website at same time, a problem can be arrive when allocating next primary key value to new record, using maximum number of records +1
how to avoid this problem and insert to sql server
please give me your ideas
View 16 Replies
View Related
Mar 23, 2007
I ought to know how to do this, but it escapes me at the moment. I need to write an insert statement for a table that will be based on a complex select query. The select query may return rows that are already in the target table. In that case, I don't want duplicates created, but I don't want the query to error, either. I can't remember how to set that up.
View 3 Replies
View Related
Jul 26, 2007
Hi:
I need to create a trigger to save every record which has been updated in a table (e.g. "Contacts") into another (e.g. "Shadow_contacts). So basically something like a versioning on database level.
I have no experience with it and any precise hints/solutions would be very appreciated
selmahan
View 1 Replies
View Related
Dec 23, 2011
we have various user defined fields, so when the user insert new value to this field , i want new records (other user field to get populated) be inserted relevant to the inserted value FROM another table (lookup)
This field is a drop down list , after insert committed , i want other user defined field to populate.
Scenario. Drop down is a list of users, after selecting and updating then i want contact details of the above selected user be populated.
CREATE TRIGGER User_Defined_field_KAE
ON [dbo].[AMGR_User_Fields_Tbl]
AFTER
INSERT
AS
INSERT INTO [dbo].[AMGR_User_Fields_Tbl]
(Client_Id,
Type_Id,
name
SELECT
Client_Id,
'1089',
A.USER_PHONE_1
FROM inserted , [dbo].[ADMN_User_Details] as A
WHERE name = a.user_id;
View 11 Replies
View Related
Aug 27, 2012
I have a table with employee references and a startdate.
I want to insert into a new table an entry for each employee for each date since their startdate to today.
Eg
EMPTABLE
empref,startdate
0001,01.01.2012
0002,02.02.2012
What I require is
NEWTABLE
empref, Date
0001,01.01.2012
0001,01.02.2012
0001,01.03.2012
......
0001,08.27.2012
0002,02.02.2012
0002,02.03.2012
......
0002,08.27.2012
View 5 Replies
View Related
Apr 2, 2004
I need to update two tables. I have created a view and am using the code in the attached file to insert into the two tables.
The page loads without errors, but I get this message that the view is not updatable because the modification affects multiple base tables.
I thought this was the purpose of views?
Does anyone have any suggestions? I am using Dreamweaver MX and SQL Server.
Thanks!
N
View 11 Replies
View Related
Dec 29, 2014
I have need to insert records when not in the target table.
sample ddl for source and target tables. Notice the target table is missing the 'Upstairs' Rows:
CREATE TABLE source (
property_id INT,
unit_type VARCHAR(30),
care_type_id VARCHAR(1),
propert_room_type_id INT,
rate MONEY)
[code]....
View 2 Replies
View Related
May 14, 2008
Hi Teachies,
I am using SQL Server Standard Edition .
in one of my table , there i am inserting around 25 millions records and that takes time around more than 3 hrs.
same thing is happening while fetching records from that table.
this database contains only single file group i.e primary
and that table contains .. Clustered as well as non clustered index.
it doesnot have any Triggers.
How do i increase this performance.
Paritioning of table cannot be use in SQL Server Standard Edition.
Or Dropping all non clustered index before insert operation will improve my performance.
Please suggest me.
Thanks
Rajesh Varma
View 2 Replies
View Related
