&<SelectParameters&> && Checked Items From CheckBoxList
Nov 24, 2006
Column1 in table 1 has a range from 1 to 5 (int)
A CheckboxList displays these 5 items. When checked (for example 1 and 4) I want a gridview with sqldatasource=sqlProducts to display the records where column1 values 1 or 4.
When I use the code below I only get the records where column1 values 1....
<asp:SQLDataSource id="sqlProducts" Runat="Server" SelectCommand="Select * From Table1 where Column1 IN (@CBLchecked_items)" ConnectionString="<%$ ConnectionStrings:pubs %>">
<SelectParameters>
<asp:ControlParameter Name="CBLchecked_items" ControlID="CBL" propertyname="SelectedValue" type="String" />
</SelectParameters>
</asp:SQLDataSource>
View 2 Replies
ADVERTISEMENT
May 22, 2006
I have a checkbox list like the one above.
For example, Training OR Production – should include everyone with an Training OR everyone with a Production checked OR everyone with both Training and Production checked. If service AND technical support – just those two options will show – the customer can only have those 2 options selected in their account and nothing else.
Is there an easy way to build the SQL query for this scenario? Any suggestions or tips?
Thank you for any help
View 1 Replies
View Related
Apr 3, 2008
What im looking to do is put a checkbox on my page and if the box is checked have it add a where clause to the sql statement.
The most i have seen with selectparameters is for it to basically take the value of the given control (or whatever) and dump it in to a query.
In this case what i would like to do is if the box is not checked it has my basic query run Select * from Table
and if the box is checked i would like it to run Select * from table where status='completed'
basically a check box that shows only completed items.
wasnt sure if i could do this with just the sqldatasource control and some selectparameters or if i had to write some code.
Thanks
Justin
View 5 Replies
View Related
Oct 24, 2006
Hi , I am trying to write a report generator by simply using a form and then a gridview that query's the database based on what the user selects on the form. Anyways, I update the SQL parameters similar to below code. I just want to know how i can tell the parameter to get ALL values from the parameter instead of a specific value. For example if the user wanted to see ALL the records for CustomerName what would i set the parameter default value to? I tried the asterisk but that did not work. Please guide me....Thanks! MattSqlDataSource1.SelectParameters["CustomerName"].DefaultValue = "some value";<asp:SqlDataSource ... > <SelectParameters> <asp:Parameter Name="CustomerName" /> </SelectParameters></asp:SqlDataSource>
View 1 Replies
View Related
Apr 17, 2007
Hi: I'm try to create a stored procedure where I sum the amounts in an invoice and then store that summed amount in the Invoice record. My attempts at this have been me with the error "The multi-part identifier "items.TAX" could not be bound"Any help at correcting my procedure would be greatly appreciate. Regards,Roger Swetnam ALTER PROCEDURE [dbo].[UpdateInvoiceSummary] @Invoice_ID intAS DECLARE @Amount intBEGIN SELECT Invoice_ID, SUM(Rate * Quantity) AS Amount, SUM(PST) AS TAX FROM InvoiceItems AS items GROUP BY Invoice_ID HAVING (Invoice_ID = @Invoice_ID) Update Invoices SET Amount = items.Amount WHERE Invoice_ID =@Invoice_IDEND
View 3 Replies
View Related
Feb 25, 2015
I am struggling to come up with a set-based solution for this problem (i.e. that doesn't involve loops/cursors) ..A table contains items (identified by an ItemCode) and the set they belong to (identified by a SetId). Here is some sample data:
SetIdItemCode
1A
1B
24
28
26
310
312
410
[code]....
You can see that there are some sets that have the same members:
- 1 and 10
- 2 and 11
- 7, 8 & 9
What I want to do is identify the sets that have the same members, by giving them the same ID in another column called UniqueSetId.
View 8 Replies
View Related
Apr 10, 2015
I'm having an issue creating a report that can group & sum similar items together (I know in some ways, the requirement doesn't make sense, but it's what the client wants).
I have a table of items (i.e. products). In some cases, items can be components of another item (called "Kits"). In this scenario, we consider the kit itself, the "parent item" and the components within the kit are called "child items". In our Items table, we have a field called "Parent_Item_Id". Records for Child Items contain the Item Id of the parent. So a sample of my database would be the following:
ItemId | Parent_Item_Id | Name | QuantityAvailable
----------------------------------------
1 | NULL | Kit A | 10
2 | 1 | Item 1 | 2
3 | 1 | Item 2 | 3
4 | NULL | Kit B | 4
5 | 4 | Item 3 | 21
6 | NULL | Item 4 | 100
Item's 2 & 3 are child items of "Kit A", Item 5 is a child item of "Kit B" and Item 6 is just a stand alone item.
So, in my report, the client wants to see the SUM of both the kit & its components in a single line, grouped by the parent item. So an example of the report would be the following:
Name | Available Qty
--------------------------
Kit A | 15
Kit B | 25
Item 4 | 100
How I can setup my report to group properly?
View 6 Replies
View Related
Dec 21, 2007
I have a form with text boxes and checkboxlists that a user will fill out and click submit. When the user clicks submit, it will update the sql database. In my sql database I have checkbox fields. My question is how can I use the selected items in a checkboxlist to update the sql database individual check boxes. Below is the code I have so far that works for a text box:Partial Class windrockform
Inherits System.Web.UI.PageProtected Sub submitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles submitButton.Click
Dim dashdatasource As New SqlDataSourcedashdatasource.ConnectionString = ConfigurationManager.ConnectionStrings("WindrockIssuesConnectionString").ToString
dashdatasource.InsertCommandType = SqlDataSourceCommandType.Text
dashdatasource.InsertCommand = "INSERT INTO IssueLog (initiator) VALUES (@initiator)"dashdatasource.InsertParameters.Add("initiator", initiatorTextBox.Text)
Dim rowsAffected As Integer = 0
Try
rowsAffected = dashdatasource.Insert()Catch ex As Exception
Server.Transfer("problem.aspx")
End Try
If rowsAffected <> 1 ThenServer.Transfer("problem.aspx")
ElseServer.Transfer("confirm.aspx")
End IfEnd Sub
End Class
I am new to asp.net and would appreciate the help.
Thanks,
View 5 Replies
View Related
Mar 14, 2008
Hi
I have CheckBoxList to make my selection as follows:if (CheckBoxList2.SelectedValue == "")
{
strSelect = strSelect;
}else if (CheckBoxList2.SelectedValue == "1")if (strWhere == " where")
{strWhere = strWhere + " pic1 = 'true' ";
}
else
{strWhere = strWhere + " and pic1 = 'true' ";
}if (CheckBoxList2.SelectedValue == "2")if (strWhere == " where")
{strWhere = strWhere + " pic2 = 'true' ";
}
else
{strWhere = strWhere + " and pic2 = 'true' ";
}if (CheckBoxList2.SelectedValue == "3")if (strWhere == " where")
{strWhere = strWhere + " pic3 = 'true' ";
}
else
{strWhere = strWhere + " and pic3 = 'true' ";
}
which mean it will addor remove the fields depends upon the user selection, but it will only select one !!
Thanks in advance
View 3 Replies
View Related
Aug 9, 2004
Hello all. When using a checkboxlist, is each selection under the checkboxlist suppose to have it's own column in the database?
Thank you,
Mike
View 5 Replies
View Related
Feb 24, 2008
Hi,
I'm trying to use a CheckBoxList to display certain records in a Grid View. I have a Grid View, a CheckBoxList with four items and a SqlDataSource and when the user check or uncheck one or more items in the CheckBoxList the Grid View should show records accordingly. I’ve tried to make it work but it’s only the first checked item in the Grid View that has any effect. I use VB. Thanks
View 7 Replies
View Related
Oct 17, 2007
Hello,Intended scenario:I have a grid view that displays a particular column using a repeater to display data stored in a separate lookup table. In the EditTemplate I drop the repeater and utilize a checkboxlist to allow for updates to be made. After the sqlUpdate command is processed on the main table I call a sub to loop through the checkboxlist and update the lookup table accordingly. Problem: I can't seem to access the checkboxlist in the edit template. I have a 'updateServices' procedure that is called by the main sql updated event. I call findcontrol on the gridview but I keep getting this error: "Object reference not set to an instance of an object". Here is my code: Protected Sub updateServices(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceStatusEventArgs) Handles sql_respParty.Updated 'Filing type was modified, update lm_Responsible_Party_Filing_Type If FilingTypeChanged = True Then Dim command As System.Data.Common.DbCommand = e.Command 'Insert service_filing_type Dim li As ListItem Dim checkBoxServices As CheckBoxList = grid_parties.FindControl("checkBoxServices") sql_allFilingTypes.InsertParameters("Party_id").DefaultValue = command.Parameters("@Party_id").Value.ToString For Each li In checkBoxServices.Items If li.Selected = True Then sql_allFilingTypes.InsertParameters("Filing_Type_id").DefaultValue = li.Value sql_allFilingTypes.Insert() Response.Write(" check: " + li.Value.ToString) End If Next End If End Sub
Thank you.
View 1 Replies
View Related
Nov 14, 2007
Hi,
I'm trying to insert multiple checkboxlist values from a databound checkboxlist into a SQL Server Express DB.
I need to insert the values JobID and CategoryID into an intermediate table which is made of two columns, JobID and CategoryID, which form the primary key. I'm using the following code:Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim insertCommand As SqlCommand
Dim strConnection As String = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;User Instance=True"Dim objConnection As New SqlConnection(strConnection)
Try
objConnection.Open()
Dim ctr As Integer
Dim str As StringFor ctr = 0 To CheckBoxList1.Items.Count - 1
If CheckBoxList1.Items(ctr).Selected Then
str = "INSERT INTO CategoryVacancies (JobID, CategoryID) values (@JobID, @CategoryID)"insertCommand = New SqlCommand(str, objConnection)
insertCommand.Parameters.AddWithValue("@CategoryID", CheckBoxList1.SelectedValue)insertCommand.Parameters.AddWithValue("@JobID", JobIDLabel.Text)
insertCommand.ExecuteNonQuery()
End If
Next
objConnection.Close()Catch ex As Exception
errorLabel.Text = "Failed because:" & ex.Message
End Try
End Sub
I get this error: Violation of PRIMARY KEY constraint 'PK_CategoryVacancies'. Cannot insert duplicate key in object 'dbo.CategoryVacancies'. The statement has been terminated.
It always inserts only the first value of the checkboxlist, instead of looping through and inserting all the rows.
Anyone know what's going wrong?
Many Thanks
View 4 Replies
View Related
Feb 4, 2008
I was just wondering what would be a preferred approach in designing the tables against checkboxlist?
For example I have 3 checkboxlist:
chklVendor
chklModel
chklColor
and each will have lets say 4 - 5 list items.
Here are the different types of approaches that I've seen when designing database tables:
1. Creating tables for each checkboxlist.
2. Creating a single table and storing the values in a comma delimited format.
3. Using XML
Also these attributes will be used in the search form as one of the fields.
View 1 Replies
View Related
Feb 4, 2007
So any help? I tried the stuff in the FAQ
View 3 Replies
View Related
Jul 16, 2007
I have the follow, i get the right amout of checkboxes but they all have the same value(System.Data.Common.DbDataRecord)
Dim objconn As New SqlConnection(connstring_MPR)Dim objcmd As SqlCommand = New SqlCommand("SELECT [Parts Master Table].COMMD_CODE as comcode FROM [Parts Master Table] INNER JOIN [Warehouse balance table] ON [Parts Master Table].PART_NUMBER = [Warehouse balance table].PART INNER JOIN POREPORT ON [Parts Master Table].PART_NUMBER = POREPORT.[Part Number] INNER JOIN [DEMAND TABLE] ON [Parts Master Table].PART_NUMBER = [DEMAND TABLE].PART WHERE POREPORT.[PO Bal] > 0 OR [DEMAND TABLE].QTY > 0 or [Warehouse balance table].ONHAND > 0 and [Parts Master Table].M_B = 1 AND [Warehouse balance table].WHSE = 'sgr' AND ([Parts Master Table].FAMILY NOT LIKE 'lam%' or [Parts Master Table].FAMILY NOT IN ('ULTCH', 'REMOT', 'MKSIN')) GROUP BY [Parts Master Table].COMMD_CODE ORDER BY [Parts Master Table].COMMD_CODE", objconn)
objconn.Open()
chkComCode.DataSource = objcmd.ExecuteReader(CommandBehavior.CloseConnection)
chkComCode.DataBind()
objconn.Close()
View 2 Replies
View Related
Aug 25, 2004
I am using the varchar data type in sql to store a comma-delimited string of multiple selections from a checkboxlist.
The string only has about 28-30 characters in it, but it maxes out the sql row length and I get the 8060 error message every time.
Here is some of the code:
"Dim industry1list As String
Dim li As ListItem
industry1list = ""
For Each li In industry1.Items
If li.Selected = True Then
industry1list = industry1list & li.Value & ","
End If
Next
....
MyCommand.Parameters.Add(New SqlParameter("@industry1", SqlDbType.VarChar, 60))
MyCommand.Parameters("@industry1").Value = (industry1list)"
I would appreciate any coaching you have for me to get back on track. Thanks, Bob
View 6 Replies
View Related
May 12, 2006
I cannot find an easy way to DELETE items which are > 1 time in my table (i am working with MS SQL 2000)
idserialisOk
-------------------
2AAA1
3BBB0
5dfds0
6CCC1
7fdfd 0
8AAA0
9CCC0
I want to DELETE each Row IN
SELECT doublons.serial, Count(doublons.serial) AS 2Times
FROM doublons
GROUP BY doublons.serial
HAVING Count(doublons.serial)>1
and WHERE isOK = 0
in my exemple , after deleting, my table must look like
idserialisOk
-------------------
8AAA1
9CCC1
3BBB0
5dfds0
7fdfd0
thank you for helping
View 10 Replies
View Related
Nov 12, 2006
Is their a data type that can be a 'check' (On or Off)? I seen this data type somewhere but forgor how to use it and what it looks like. Can anyone help. :)
View 1 Replies
View Related
Jun 22, 2007
I have a table of magazine issues. The table are defined as below:
issueID int Unchecked
name varchar(50) Unchecked
title varchar(100) Checked
description varchar(500) Checked
crntIssue bit Checked
archived bit Checked
navOrder int Checked
dateCreate datetime Checked
And here is what I want. Is there a way when inserting/updating or on the table itself to make sure that there is only one record that is marked as the current issue? The way I have it here in my table, any records can have the current issue (crntIssue) field checked. I only want one crntIssue field checked regardless of how many records or issues are in the table. If there is no way to automatically have SQL Server to manage that then that means I must check all the records before hand before the update/insert query, correct?
View 23 Replies
View Related
Feb 10, 2008
Hi there!Basicly I only want to retrieve the value of the field "FirstTime" from a record as shown below:1
2 Dim ProdUserID As String = "samurai"
3
4 Dim LoginSource As New SqlDataSource()
5
6 LoginSource.ConnectionString = ConfigurationManager.ConnectionStrings("ASPNETDBConnectionString1").ToString()
7
8 LoginSource.SelectCommandType = SqlDataSourceCommandType.Text
9 LoginSource.SelectCommand = "SELECT FROM aspnet_Users (FirstTime) VALUES (@FirstTime) WHERE UserName=@ProdUserID"
10
11 Dim SeExiste As Boolean = LoginSource.SelectParameters.GetValues("@FirstTime")
12
This is the error reported:Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: BC30455: Argument not specified for parameter 'control' of 'Public Function GetValues(context As System.Web.HttpContext, control As System.Web.UI.Control) As System.Collections.Specialized.IOrderedDictionary'. Please can you answer in the same logical schema? I'm a newbie so if you may, describe the process step by step. It would be easier for me to understand.Thanks in advance.
View 1 Replies
View Related
Mar 10, 2008
What am I forgetting to do? I am setting the SELECT parameter 'techcode' in the code behind trying to paqss it as the ZWOP in my SQL Select statement but it is not getting to the SQl SelectParameters statement. Do I need to place a TextBox control on the ASPX page to hold it?
ERROR: Exception Details: System.InvalidOperationException: Could not find control 'techcode' in ControlParameter 'ZWOP'.
CODE BEHINDint techcode;protected void Page_Load(object sender, EventArgs e){ techcode = 11; }
ASPX CODE. . . SelectCommand="SELECT [ZL_ID], [complete], [error], [Zip], [ZipCity], [ZipState], [ZWOP] FROM ZipData WHERE ([complete] = 0 OR [complete] IS NULL ) AND [ZWOP] = @techcode ORDER BY Zip" <SelectParameters> <asp:ControlParameter ControlID="techcode" Name="ZWOP" PropertyName="SelectedValue" Type="Int16" /> </SelectParameters>
View 8 Replies
View Related
Feb 26, 2004
Any idea how I can *blush* get my database server registration wizard back after checking the box next to the prompt "From now on I want to perform this task without using a wizard"?
I KNOW it said "from now on", but I didn't think it MEANT it ;)
View 6 Replies
View Related
Nov 27, 2007
Is there a way that upon exiting VSS I can be warned if I have programs checked-out, so that I don't leave for vactaion with an important program checked-out?
Thanks!
View 1 Replies
View Related
Apr 4, 2008
Hi everyone;
I would like to import data from Excel file which has got 3000 rows to a SQL server table which has got 20.000 rows.
I want to check each row before importation for the duplication. When i run this project it is working very slow..How can i increase the performance ??
Can i do this process as bulk insert within checked data ?
Best Regards,
Serkan
View 3 Replies
View Related
Feb 16, 2007
Hi,
I am using Visual Web Developer 2005 Express Edition.
I am trying to SELECT three information fields from a table when the Page_Load take place (so I select the info on the fly). The refering page, sends the spesific record id as "Articleid", that looks typically like this: "http://localhost:1424/BelaBela/accom_Contents.aspx?Articleid=2". I need to extract the "Article=2" so that I can access record 2 (in this example).
How do I define the SelectParameters or QueryStingField on the fly so that I can define the WHERE part of my query (see code below). If I remove the WHERE portion, then it works, but it seem to return the very last record in the database, and if I include it, then I get an error "Must declare the scalar variable @resortid". How do I programatically set it up so that @resortid contains the value that is associated with "Articleid"?
My code is below.
Thank you for your advise!
RegardsJan/*******************************************************************************
* RETRIEVE INFORMATION FROM DATABASE
*******************************************************************************/
// specify the data source
string connContStr = ConfigurationManager.ConnectionStrings["tourism_connect1"].ConnectionString;
SqlConnection myConn = new SqlConnection(connContStr);
// define the command query
String query = "SELECT resortid, TourismGrading, resortHits FROM Resorts WHERE ([resortid] = @resortid)";
SqlCommand myCommand = new SqlCommand(query, myConn);
// open the connection and instantiate a datareader
myConn.Open();
SqlDataReader myReader = myCommand.ExecuteReader();
// loop thru the reader
while (myReader.Read())
{
Label5.Text = myReader.GetInt32(0).ToString();
Label6.Text = myReader.GetInt32(1).ToString();
Label7.Text = myReader.GetInt32(2).ToString();
}
// close the reader and the connection
myReader.Close();
myConn.Close();
View 3 Replies
View Related
Apr 4, 2007
Hello,
I am sure there is a way to do this programmatically, but it is just not sinking in yet on how to go about this. I have a page where I use a dropdownlist that goes into a gridview and then the selected item of the gridview into the detailsview (typical explain seen online). So, when selecting from the dropdownlist, the gridview uses a controlparameter for the selectparameter to display the appropriate data in the gridview (and so on for the detailslist).
My question is - I wanted to use this same page when coming in from a different page that would utilize querystring. So, the parameter in the querystring would be for what to filter on in the gridview, so the dropdownlist (and that associated controlparameter) should be ignored.
Any suggestions on how to go about this? I assume there is some check of some sort I should in the code (like if querystring is present, use this querystringparameter, else use the controlparameter), but I am not sure exactly what I should check for and how to set up these parameters programmatically.
Thanks,
Jennifer
View 5 Replies
View Related
Apr 27, 2008
Hi,
I am using a grid view with parameter defined in dropdown list. the asp code is:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Pubs %>"
SelectCommand="SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"
DeleteCommand="DELETE FROM [authors] WHERE [au_id] = @au_id">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="state" PropertyName="SelectedValue"
Type="String" /></SelectParameters>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:Pubs %>"
SelectCommand="SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"
DeleteCommand="DELETE FROM [authors] WHERE [au_id] = @au_id">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="state" PropertyName="SelectedValue"
Type="String" />
</SelectParameters>
</asp:SqlDataSource>
</asp:SqlDataSource>
I would like to to set the parameter assignment in my VB code in Page_Load methodWhen i am using:
SqlDataSource1.SelectParameters("state").DefaultValue = DropDownList1.Text
SqlDataSource1.SelectCommand = "SELECT [au_id], [au_lname], [au_fname], [state] FROM [authors] WHERE ([state] = @state)"I get error message saying: Object reference not set to an instance of an object.
Any ideas how I can set the select parameters (in my VB code) to use the dropdown list I have in my page?
Thanks,
Uzi
View 8 Replies
View Related
Dec 30, 2005
Hi All,
I'm trying to set the SelectParameters of SqlDataSource from the code behind.
This is my query: SELECT * FROM [UploadSessions] WHERE ([OwnerID] = @OwnerID)And I need to set the value of the @OwnerID at the code behind since it is stored in an object.
How can I do it??
Thanks in advance
Bar
View 7 Replies
View Related
Jun 13, 2006
Why is it that when I include a column from my SQL Server database table, which has it's Allow Nulls checked, in the data source of a control that the record becomes not update-able? How do I get around this?
View 1 Replies
View Related
Oct 24, 2006
Hi,I have a GridView which is bound to a SqlDataSource that connects to Oracle. Here's the code: <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:OracleConnectionString %>"
ProviderName="<%$ ConnectionStrings:OracleConnectionString.ProviderName %>" SelectCommand="SELECT QUIZ.TITLE FROM QUIZ WHERE (QUIZ.USERNAME = @UserName)"> <SelectParameters> <asp:SessionParameter Name="UserName" SessionField="currentUser" Type="String" /> </SelectParameters> </asp:SqlDataSource> As you can see I'm trying to pass the value of the "currentUser" session variable to the query. I get an error message "ORA-xxx Illegal name/variable". Where am I going wrong? I tested the connection by placing a specific value instead of the "@UserName" and it worked.
View 1 Replies
View Related
Feb 28, 2007
ALTER PROCEDURE dbo.Default_Edit1
(
@ID int,
@Family Nvarchar (100) OutPut
)
AS
/* SET NOCOUNT ON */
SELECT @Family=Family FROM Table1 where (ID=@ID)
RETURN
SqlDataSource1.SelectParameters.Add("ID", Me.GridView1.DataKeys(CInt(e.CommandArgument)).Item(0))
SqlDataSource1.DeleteCommandType = SqlDataSourceCommandType.StoredProcedure
SqlDataSource1.SelectCommand = "dbo.Default_Edit1"
SqlDataSource1.SelectParameters("Family").Direction = Data.ParameterDirection.Output
Label3.Text = SqlDataSource1.SelectParameters("Family").Direction.ToString()
it's have error
I went to return 1 fild
??
View 2 Replies
View Related
Mar 14, 2008
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:CollegeDatabaseConnectionString %>" SelectCommand="SELECT employee_datails.* FROM employee_datails WHERE memberid !=@id OR memberid OR memberid==uid"> <SelectParameters> <asp:SessionParameter Name="id" SessionField="userid" /> <asp:QueryStringParameter Name="uid" QueryStringField="memberid" /> </SelectParameters> </asp:SqlDataSource> I tried like this but it is not working. It takes at a time one sessionparameter or querystringparameter. I want if profile.aspx--> then i want session parameter in select queryIf profile.aspx?id=12432---> then i want querystringparameter in select query.
View 2 Replies
View Related
