&&<&&> Values From Two Tables
Mar 27, 2008
I have two tables, A & B I need to compare 4 columns in table B with one column in table A. The data returned should only be the values which are not equal values in a column in table A
For example:
row 1 of columns 1, 2, 3, 4 in table B have values 1001, 1001, 1002, 1003
row 2 of columns 1, 2, 3, 4 in table B have values 1001, 1008, 1009, 1007
Table A has a column 1 which has many rows which may contain the values 1001, 1002 etc... but does not have the value 1008. It would then return row 2 as the value in column 2 of table B does not exist in table A column 1.
Any help would be much appreciated
View 7 Replies
ADVERTISEMENT
Sep 22, 2004
Howdy all. I've tried to figure this out on my own, but alas!, I keep hitting a brick wall.
I'm making a game score "keep-tracker" (very technical jargon, I know...) and so I've set up 3 tables:
Table 1: Players
Columns: PlayerID, PlayerName, Paid
Table 2: Contestants
Columns: ContestantID, ContestantName, Eliminated
Table 3: Picks
Columns: PlayerID, Pick1, Pick2, Pick3, etc...
For Players and Contestants tables, the IDs are int, the names are nvarhars, and Paid/Eliminated is boolean (bit).
Now, I'm trying to display in a datagrid using ASP.NET 1.1, the PlayerName along with the Picks that they have chosen.
I've created a stored proc as follows:
CREATE PROCEDURE GetPicks AS
SELECT
Players.PlayerName,
Picks.Pick1,
Picks.Pick2,
Picks.Pick3,
Picks.Pick4
FROM
Picks, Players, Contestants
WHERE
Picks.PlayerID = Players.PlayerID AND Picks.Pick1 = Contestants.ContestantID
ORDER BY
PlayerName
GO
The result I'm getting is:
PlayerName Pick1 Pick2 Pick3 Pick4
Bob 1 3 5 12
Charlie 1 3 16 17
Wilma 4 7 9 14
The PlayerName appears, rather than PlayerID, which is good to see, but my question is: how can I get the ContestantName to appear as Pick1, Pick2, etc., instead of the integer?
I've tinkered around with JOINs, but I'm a beginner and I'm finding JOINs a bit confusing...
Help would be appreciated! Thanks for your help in advance...
JP
View 3 Replies
View Related
Feb 22, 2001
In the web pages like everbody I'm adding values like "all selections" or "no selection" for select boxes manually. After this manual addition I add the database results within a loop like States.
Is it OK to add manual selection entires to database with a ID value of 0 like below;
StateID State
------- -----
0 Not Selected
1 NY
....
and then using in web page without any manual entries. Also is this kind of entry can be better for indexing and Foreign Key usages.
Thanks in advance.
View 2 Replies
View Related
Feb 15, 2007
Hello all, i have 2 sql tables, and they each contain a column with bigint values. What i want to do is add up the values from both table, and then display it as 1 number. Supposing i have the following
table name: DownloadTable
fileName | DownloadSize |
file1 | 45
file2 | 50
file3 | 20
---------------------------------------------
second table
table name: VideoTable
fileName | VideoSize |
file1 | 40
file2 | 60
file3 | 20
----------------------------------------
Now, i want this to output 120, wich is the sum of the sum of the values of table 1 and 2 I've already tried the following:
SELECT SUM(DownloadTable.DownloadSize) + SUM(VideoTable.VideoSize) FROM DownloadTable, VideoTable
However, when i ran this, it gave me a huge number, that was far from accurate from what it was suppose to output. Can anyone help me?
Thanks in advance
Regards,
View 8 Replies
View Related
Oct 10, 2005
Hii'm fairly new to sql....i know the basic..........what i am trying to do is get values from 1 tables and insert it into another table using a store procedure........
View 12 Replies
View Related
Oct 26, 2000
Does anyone know if or how I can insert a default value of the (+) character into a column? when I try to save it I get an error message saying it has a problem with ')'.
View 1 Replies
View Related
Oct 18, 2006
Hello
for MS SQL 2000
I am having MyTable with 7 columns : A,B,C,D,E,F,G
i want to
INSERT INTO myTable
SELECT A,B,C,D FROM FirstTable WHERE FirstTable.ID > 100
and the columns E,F,G :
E = 1
F = SELECT Max(ID) AS F FROM SecondTable
G = 0
how can i do it ?
i would like to create a stored procedure
thank you
View 2 Replies
View Related
Jul 14, 2007
Hi, I am completly new in ASP , but, due the necessity of the production in the company I work, I need
urgently to learn do deal with scripts and SQL.
I did a script that shows on the production screen the consume tax of the gas instantly on time and it
worked. Now I have to do a table formed by the DIVISION of a valor V from one table by the valor V in
another table, mas the values must be taken at the same time do give me the gas consumed by ton produced.
Explaining in details:
I have two tabels:
1 - PDE#HD#Consumption#RP_Consumption_Gas
2 - PDE#HD#SpeedCurves#Productivity
Inside each of these tables, there are two columms with the same name for both -> V, T. The V columm of the
table PDE#HD#Consumption#RP_Consumption_Gas gives me the cas consumed and the V table of
PDE#HD#SpeedCurves#Productivity the productivity. The V1/V2 graph must be ploted in a 24 hours period. What
happens is that if I do it for 24 houres, I mean, 1 day, the graph is ploted completly wrong in time! If I
do the same thing, but using only one columm, not the division by another, it works! Why this is happening ?
What is wrong with the following script ?? I need to know the answer for this as fast as possible! If you
need more details, I will give.
The script:
DayForm = Request.Form("D1")
Dim hoje
Dim dia
If DayForm = "" OR DayForm = 0 Then hoje = true
If hoje Then _
Set rs = conn.Execute("SELECT
convert(varchar,PDE#HD#Consumption#RP_Consumption_Gas.T,108),(PDE#HD#Consumption
#RP_Consumption_Gas.V/PDE#HD#SpeedCurves#Productivity.V) As Consumo FROM
PDE#HD#Consumption#RP_Consumption_Gas INNER JOIN PDE#HD#SpeedCurves#Productivity ON
PDE#HD#Consumption#RP_Consumption_Gas.T = PDE#HD#SpeedCurves#Productivity.T WHERE
PDE#HD#Consumption#RP_Consumption_Gas.T > DATEADD(dd, -1, GetDate()) ORDER BY
PDE#HD#Consumption#RP_Consumption_Gas.T") _
Else _
Set rs = conn.Execute("SELECT
convert(varchar,PDE#HD#Consumption#RP_Consumption_Gas.T,108),(PDE#HD#Consumption
#RP_Consumption_Gas.V/PDE#HD#SpeedCurves#Productivity.V) As Consumo FROM
PDE#HD#Consumption#RP_Consumption_Gas INNER JOIN PDE#HD#SpeedCurves#Productivity ON
PDE#HD#Consumption#RP_Consumption_Gas.T = PDE#HD#SpeedCurves#Productivity.T WHERE
PDE#HD#Consumption#RP_Consumption_Gas.T > convert(date, DATEADD(dd, " & DayForm & ", GetDate())) AND
PDE#HD#Consumption#RP_Consumption_Gas.T < convert(date, DATEADD(dd, " & DayForm+1 & ", GetDate())) ORDER BY
PDE#HD#Consumption#RP_Consumption_Gas.T ")
View 2 Replies
View Related
May 22, 2007
I have about 14 tables that I am trying to tie together in a view tosee a user's status in our company.Joe User:Email - ActiveADP - ActivePortal - Inactiveetc.We need to track application access across the company, so we havetables for each application that contain user info(username,password(encrypted), start date, end date, changed date) so that wecan track who has what, and when they were given access as well aswhen it was taken away.Every application table has a userID attached to it.What I would like to do is to take the userID field and look for theirapplication access across the company. To do this, i'll have to lookfor the max value in each table because someone could be given access,have it taken away, and be given it again. People move all over theplace here, so we have to be able to track who has what, when, and atwhat building.I started out with trying to left outer join the tables together, butit didn't work. I tried doing something along the lines of:selectesarfAppEmail.emailID,esarfAppEmail.esarfUserID,CASE WHEN esarfAppEmail.endDate IS NULL Then 'Active' else 'Inactive'end as EmailStatus--,
Quote:
View 2 Replies
View Related
Jul 20, 2005
Hi,I have two tables such that in each table I need to make sure thatcolumn x in table A and column y in table B have a unique valuesmeaning that a user cannot insert a value to column A if its alreadyexist in column B and vice versa.How can I enforce it? Please remember that this two different tables.Thanks,Ori.
View 2 Replies
View Related
May 11, 2008
Hello all!
I´m currently devoloping an application where users can register errors related to recieved purchase orders.
I store these values in i table where the purchase order id i PK, and the possible errors that
can exist are stored as bit.
Now I want to be able to put a price on these errors.
I´m thinking about adding another table, containing all possible errors as columns, and then storing the cost of each error as an integer, and probably also a datetime for keeping track of when the costs was last updated.
I´m pretty sure this problem has been solved alot of times before, so I don´t wanna do something stupid here :-)
I´m also wondering about how it would be best to show the computed values?
Should I use a view for this?
For example:
SELECT (dbo.Orders.QuantityError * dbo.Costs.QuantityError )
FROM dbo.Costs CROSS JOIN
dbo.Record
assuming now that the Costs table only contains one row.
Is this the right way to go, or can you guys give me hints to a better solution?
Regards
Daniel
View 4 Replies
View Related
Jan 25, 2008
Hi All, am new to sql server in my application I am having one Asp.net web page, the user has to enter values for 5 fields(Empno,Empname,salary,deptno,deptname) in that web page and for that i created two tables in sql serverEmp Table- empno(primary key),empname,salaryDept Table- Deptno(primary key),empno(Foreign key ),Deptname(with some check constraint.) After the user enter all the values in the Asp.net web page now i want to store data into database for that i wrote the following stored procedure...create procedure usp_EmpDept @empno integer, @empname varchar(15), @salary money, @deptno integer, @deptname varchar(10) As Insert into emp(empno,empname,salary)values(@empno,@empname,@salary) Insert into dept(deptno,Empno,deptname)values(@deptno,@empno,@deptname) but the problem is whenever some constaint violation for eg. if some check constraint violation in Dept table its inserting the values in the Emp table only, but my requirement is, It must enter into both tables if there is no constaraint violation otherwise it has to ignore both the tables. And also please suggest is there any better way to insert values into two tables other than using the stored procedure Any help will be greatly appreciated..Thanks,Vision..
View 6 Replies
View Related
Feb 5, 2005
Hi All,
Is it possible in SQL to Restrict value in one table checking a value on anather tables.
Scenerio-1.
I have two table let say,
Teb1 and Teb2. Teb1 has a column called- Business_type and Teb2 has a coulmn called Incorporated_date. I just need to restrict If the value of Business_type column in Teb1 is "Propritory" then Incorporated_date in Teb2 should not be blank (nulll) . Otherwise it can take null value.
Scenerio -2.[/B]
I have table called [B]SIC.
This table has a two column called SIC1 anc SIC2 . Is it possible to restrict that clumn SIC1 and SIC2 should have same values( duplicate values cannot be entered in both columns.
Please Advise.
Vijay
View 1 Replies
View Related
Feb 21, 2012
I have two tables A and b
A
projectID Setid value
301 1 abc
301 2 xyz
302 4 def
..... .... ..
B
SettingsId Setvalue
1 ter
2 yet
4 44
... ....
I want to update all the Setid of table A with that of values from table b. How can i do this?
View 7 Replies
View Related
Dec 4, 2014
I have 2 databases( "A" + "B") with identical number of tables and identical number of records for each table. There are also identical number of fields pre record per table. Table A has had the sensitive data within the fields scrambled.
I need to know if there is a way to read down each DB table by table, record by record, field by field and compare the data values. If they are different I need to output the Field name, the data value and the Table name from the Scrambled Table (lets say its "A").
View 1 Replies
View Related
Nov 19, 2013
Is there a way to join tables that have multiple matches to each other (2 records in one table and 2 in another) so that you get 2 records returned instead of 4 with only 1 JOIN ON qualifier?
In our warehouse DB, there is a master location table, an inventory location table, and physical table for counting all product in the warehouse. The master location table has one record per location, but there could be multiple items in that location so my outer join from the master location to the inventory table returns something like:
select M.MASTER_LOC, C.AS ORIG_ITEM, C.ORIG_LOT, C.ORIG_QTY
from
M_LOC M LEFT OUTER JOIN
C_INVT C ON M.MASTER_LOC = C.INVT_LOC
order by M.LOC_CODE
LOCATION ITEM LOT QTY
01-01-A 100 abc 25
01-02-A NULL NULL NULL
01-03-A 200 def 50
01-03-A 200 ghi 50
My problem is adding the third counted inventory table because it could look like anything depending on what we find in the racks:
LOCATION ITEM LOT QTY
01-01-A 100 abc 25 (exact match)
01-02-A 150 cba 75 (Item found)
01-03-A 200 ghi 50 (LOT swapped)
01-03-A 300 def 50 (Item Changed)
My join is returning 4 rows for location 01-03-A which I understand, but I'm wondering if I can sort within the join or make some temp tables so that instead of:
select M.MASTER_LOC, C.AS ORIG_ITEM, C.ORIG_LOT, C.ORIG_QTY, E.AS CNTD_ITEM, E.CNTD_LOT, E.CNTD_QTY
from
M_LOC M LEFT OUTER JOIN
C_INVT C ON M.MASTER_LOC = C.INVT_LOC LEFT OUTER JOIN
E_PHYS_INVT E ON M.MASTER_LOC = E.LOC_CODE
order by M.LOC_CODE
LOC1 ITEM LOT QTY LOC2 ITEM LOT QTY
01-03-A 200 def 50 01-03-A 200 ghi 50
01-03-A 200 def 5001-03-A 300 def 50
01-03-A 200 ghi 5001-03-A 200 ghi 50
01-03-A 200 ghi 5001-03-A 300 def 50
I'd like to just end up with 2 lines sorted by location, item, lot, qty so I can see that there is a problem with that location.
LOC1 ITEM LOT QTY LOC2 ITEM LOT QTY
01-03-A 200 def 5001-03-A 200 ghi 50
01-03-A 200 ghi 5001-03-A 300 def 50
View 2 Replies
View Related
Dec 20, 2007
I am trying to add records to 2 separate tables and each table has a unique ID from the other table. I need to find the highest number ID from both tables (and add 1) and add a record with both new values to both tables.
I have tried the following, but it is not working. Any help would be appreciated, Thanks (my tables are MEMOS and PDSMSGC)
INSERT INTO MEMOS (MemoID, ParentID, FieldName, MemoText)
SELECT MAX(MemoID) + 1 FROM "MEMOS", MAX(MessageID) +1 FROM "PDSMSGC", 'pmc:MemoID', 'Hi my name is bob'
INSERT INTO PDSMSGC (MessageID, MemoID) SELECT MAX(MessageID) + 1 FROM "PDSMSGC", MAX(MemoID) FROM "MEMOS"
View 5 Replies
View Related
Nov 6, 2015
I have two tbles that have ItemName and their bill amount
a)Â tblLunch
which shows records like below
Invoice  Item                    Amount Â
--------------------------------------------
1 Â Â Â Â Â Â COFFEE Â Â Â Â Â Â Â Â Â Â Â 1000.00Â
2 Â Â Â Â Â Â TEAÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2000.00
3 Â Â Â Â Â Â ICE CREAM Â Â Â Â Â Â Â Â 1000.00
b)Â tblDinner
which shows records like below
Invoice  Item                Amount Â
------------------------------------------------------------
1 Â Â Â Â Â Â COFFEE Â Â Â Â Â Â Â Â Â 1000.00Â
2 Â Â Â Â Â Â TEA Â Â Â Â Â Â Â Â Â Â Â Â 2000.00
3 Â Â Â Â Â Â PASTA Â Â Â Â 1000.00
I want to perform a query that should SUM Amount Columns by Grouping the Item from both the tables, so we could get the following result
Item                Amount Â
------------------------------
COFFEE Â Â Â Â Â Â Â Â Â 2000.00Â
TEA Â Â Â Â Â Â Â Â Â Â Â Â 4000.00
ICE CREAM Â Â Â Â Â Â 1000.00
PASTA Â Â Â Â Â Â Â Â Â Â 1000.00
View 3 Replies
View Related
Aug 20, 2007
Hi,
I am trying to replicate some of my production tables into development tables in an automated way. Decided to use the Select INTO command because it seemed to be the easiest way. This command does copy all the col sizes, but does not copy over the "default value or binding" fields. How do I do this? I saw that in create table you can use "INCLUDING COLUMN DEFAULTS "
But this doesn't seem to work for the select into command. Can you tell me how I can do this? Currently the command I am using is:
SELECT * INTO " + DevTableName + " From " + ProdTableName
However, this won't copy over the default column values that I have specified inside the table ProdTableName. Can you tell me how I can do this?
Thanks,
-Ankur
View 6 Replies
View Related
Feb 27, 2008
Hi, i m using vwd 2005 express and sql express. i have created following tables table_office,table_customer,table_order in my sql express. i also added one more table named table_final. In my webform i have 2 textbox and submit button plus(controls to take values for table_office,table_customer,table_order).so when user fills the form and clicks the button the data gets inserted into thier respected tables.similarly table_final gets populated with values in this way (id,name,address,table_office_id,table_customer_id,table_order_id) Now when displaying the output in the gridview. i combined values of all these tables together. its fine till here. Now what i want is i want to write a query to retrieve these values back into the webform . Here i want the values from all the tables back into the webform controls on a click of a button.so that i can modify it manually, make updation on it and finally show it into gridview. i hope i m able to make u understand. anyway can somebody help me with simple code(C#) and sql query to achieve this task.? thanks. jack.
View 8 Replies
View Related
May 26, 2000
I am looking for suggestions on how to accomplish the following task with the least amount of hand keying that I can get away with.
I have a main table named Office and 4 other tables that have the Office table ID field value in them.
I have been given a new set of ID values that need to replace the values that are currently in the Office table and then update the ID field in the other 4 tables.
I have only thought of 2 solution and I don’t like either one.
1 Add a new column to the Office table and key in the new ID’s then go through the pages that reference the old ID field and change the SQL queries to use the new field.
2 Change the value of the current Office ID field to the new value. Search the other 4 tables for the old value and then update them to the new value.
Anyone got a better Idea?
View 1 Replies
View Related
Feb 24, 2005
Hi,
I'm using scalar UDFs in SQL server to return computed values. I've been trying to use the same udfs to perform the same computations but from different tables, but I'm not sure how. Can someone please help???
Here's an example of a counter that I'm using to return the number of days.
CREATE FUNCTION [dbo].[MarketPulse_fn_Counter] (@date smalldatetime, @date2 smalldatetime, @osid int)
RETURNS int AS
BEGIN
return (select count(*) from MarketPulse_0ndqc
where stockosid = @osid and createdate <= @date and createdate >=@date2 )
END
How can I use this same UDF to do the same computation but to SELECT from another table and return that value?
View 4 Replies
View Related
Jan 19, 2006
I have several tables that are related with the same primary key that I need to make a consolidated list of values for. The schema of each table is similar but some have more or less fields than others. I want to make a list of all table names, field names, and the value of that field. I can select all tables included from sysobjects. The existence of the key is probable but not guaranteed in all tables. The basic table format is: Table1------ID Field1 Field2 Field31 0.0 4.1 3.92 0.5 1.3 0.23 7.1 8.8 9.3 Table2------ID Field10 0.41 3.32 2.73 5.7 Table3------ID Field1 Field22 2.4 4.63 4.3 8.1 Format of the result set:(specifying ID = 2) Table_Name Table_Field ValueTable1 Field1 0.5Table1 Field2 1.3Table1 Field3 0.2Table2 Field1 2.7Table3 Field1 2.4Table3 Field2 4.6
View 8 Replies
View Related
Jan 29, 2015
I am new in SQL and i need do a query where I need sum values from 2 tables, when i do it the Sum values are not correct. this is my query
SELECT D.Line AS Line, D.ProductionLine AS ProductionLine, D.Shift AS Shift, SUM(CAST(D.DownTime AS INT)) AS DownTime,
R.Category, SUM(Cast(R.Downtime AS INT)) AS AssignedDowntime,
CONVERT(VARCHAR(10), D.DatePacked,101) AS DatePacked
FROM Production.DownTimeReason R
left JOIN Production.DownTimeHistory D
[Code] .....
View 3 Replies
View Related
Jul 17, 2015
I have a table of raw data with supplier names, and i need to join it to our supplier database and pull the supplier numbers.
The issue is that the raw data does not match our database entries for these suppliers; sometimes there are extra periods, commas, or abbreviations (i.e. FedEx, FederalExpress, FedEx, inc.) etc. I'm trying to create a query that will search for entries that are similar.
I tried setting a variable to be equal to the raw data field, and then using a LIKE '%@Variable%' to try and return anything that would contain it, but it didnt return any rows.
View 9 Replies
View Related
Jul 11, 2013
how to reseed for selected basing on their last count.I have written a query to to reseed basing on last count.But for how to do 10 tables at a time .
declare @last int
select @last=max(empid) from Table_1
DBCC CHECKIDENT (Table_1, RESEED, @last)
but how to do for more than 10 tables or more tables...reseeding at one go basing on last count.
View 2 Replies
View Related
Jan 11, 2014
I joined different tables and got a result like this:
result | process | goal | date |
------- ---------- ------ -----------
ok | process4 | 1 | 12.10.2013
bad | process1 | 2 | 13.10.2013
ok | process1 | 4 | 12.12.2013
good | process4 | 1 | 03.01.2014
ok | process1 | 3 | 10.04.2013
bad | process3 | 6 | 09.01.2014
bad | process4 | 3 | 30.12.2013
best |NULL| NULL
Now I want to count the results by counting the processes and group them by the result.
But it should be count the latest result per process only, e.g. for goal "1" just "good" at 03.01.2014. I solved that with a subquery (date=SELECT MAX(...)..).
But now the result "best" disappears, because that column has no date.
Secondly I want to count results for a specific process, e.g. for process4. Every goal has max. one process, with different dates. But one process could have more than one goal.
I want to have this result for process4:
count | result
------ -------
1 | good
1 | bad
0 | ok
0 | best
But I got only:
count | result
------ -------
1 | good
1 | bad
I have tried a lot, but nothing works.
The whole result (best, good, ok, bad) are stored in an other table and I joined it.
View 4 Replies
View Related
Apr 19, 2014
I have two tables and I need to update values in them via a stored procedure. Tried too much to update but some times it update the first table only, others the second or even fail due to cannot allow duplicates. Also when it updates the WHOLE data in the table becomes the same as the new updated ones. I've now reached to this error after all these lines of codes
Cannot insert the value NULL into column 'Emp_ID',table 'DatePics'; column does not allow nulls. UPDATE fails.The statement has been terminated
Here is the SQL code :
ALTER procedure [dbo].[UpdateEmp]
@EmpName nvarchar(100),
@Nationality nvarchar(30),
@Passport nvarchar(20),
@ContractDate date,
@HealthDate date
[Code] ......
View 4 Replies
View Related
Jun 25, 2007
Hello!
I wonder if anybody can help me with the following problem.
I want to insert values to two tables (Buy and Product) simultainasly ie i want the foreign key in Product to have the same value the primary key have in Buy.
Regards KE
KE
View 8 Replies
View Related
Mar 14, 2006
Values of two columns in two different tables--presentation usingselectHi Everyone,i have two tables in the database . One is called address tableand one is adressPhone Table. Below is the sample of those two tablesAddresscol1 col2 col3X 12 13y 15 19z 18 10create table address(col1 varchar(20),col2 int, col3 int)insert into address values ('x',12,13)insert into address values ('y',15,19)insert into address values ('z',18,10)AddressPhoneCol4 Col5 Col613 213-455-9876 113 415-564-6546 213 543-987-5677 319 678-555-2222 1create table addressphone(col4 int, col5 varchar(50),col6 int)insert into addressphone values(13,'213-455-9876',1)insert into addressphone values(13,'415-564-6546',2)insert into addressphone values(13,'543-987-5677',3)insert into addressphone values(19,'678-555-2222',1)I have to display something like thisx 12 13 213-455-9876 415-564-6546 543-987-5677y 15 19 678-555-2222 NULL NULLSo there is one to many relationship between address andaddressPhone table where address.col3 = addressphone.col4I don't know how to write the query to get the phone numbers thathas he same id in the same row like I displyed above.I did something like this, but this is not workingselect col1,col2,col3, (select col5 from addressPhone where col6=1),(select col5 from addressPhone where col6=2), (select col5 fromaddressPhone where col6=3),from address table inner join addressPhoneon address.col3=addressphone.col4above is not working because it is complaining that a subquerycannot return multiple results. Col6 in the addressphone table isthe phone type ike business phone,mobile phone or home phone. It is possible that there are two phonenumbers for business phone.Please let me know how can I write this query.Any help will be greatly appreciated.Thanks
View 4 Replies
View Related
Mar 26, 2008
I want to group by a fields value in a table. I have a purchase table where contracts and orders are stored in together. Now what I need is, I have to group only by the rows that contain an identical contract_no and order_no as those records represent the actual contract. the other rows contain order data-sets which need to be subtracted from the contracts values.
datasource:
contract_no order_no name amount
12 12 contract1 1,000,000
12 215 order215 50,000
12 460 order460 75,000
280 280 contract2 500,000
280 340 order340 10,000
280 410 order410 9,000
I want to display each order that took place via drilldown/hide function in the table, and calculate the amount from the contract that is left.
desired result report:
12 contract1 1,000,000
order 215 50,000
order 460 75,000
amount left 875,000
View 1 Replies
View Related
Jul 30, 2007
Hi
I am trying to insert values into a table that doesn't exist there yet from another table, my problem is that because it is joined to the other table it keeps on selecting more values that i don't want.
Code Snippet
SET NOCOUNT ON
INSERT INTO _MemberProfileLookupValues (MemberID, OptionID, ValueID)
SELECT M.MemberID, '6', CASE M.MaritalStatusID WHEN 1 THEN '7'
WHEN 2 THEN '8'
WHEN 3 THEN '9'
WHEN 4 THEN '10'
END
FROM Members M
INNER JOIN _MemberProfileLookupValues ML
ON M.MemberID = ML.MemberID
WHERE M.Active = 1
AND OptionID <> 6
When i execute that code it returns all the values, let say OptionID = 3 is smoking already exists in the MemberProfileLookupValues table then it is going to select that persons memberID
I want to insert only members values that aren't already in the _MemberProfileLookupValues from the Members table (I think that it is because of the join statement that is in my code, but i don't know how i am going to select members that aren't in the table, because i have a few other queries that are very similar that are inserting different values, so ultimately
ONLY INSERT THE MemberID the values 6 and the statusID of X if it is not in the table already.
Any ideas / help will be greatly appreciated. Please help.
Kind Regards
Carel Greaves
View 3 Replies
View Related
May 3, 2007
Hi
I'm trying to compare two varchars to check if they are the same, if they are the same then the color must turn red, if not then they must remain black
SELECT *
from members m, client c
where C.ClientID = m.ClientID
AND c.ClientID in (87,86)
AND m.email in ('dassd@fdskjh.com','asdfas@sdfd.net', etc...)
my results will give me two of the same email addresses but with different ClientID's, now when it
finds the same email it needs to make them both "RED"
Please help, any advice would be helpful
Kind Regards
Carel Greaves
View 1 Replies
View Related
