.rdlc Table Use Of SUM And SWITCH Together?

Jan 19, 2007

Hello everyone, thanks in advance for reading. I'm new to reports and have tried searching for my answer with no luck. Any direction would be great.

Here is the issue, I have 3 colums in the dataset which display String data ("High", "Medium", or "Low")

I've added a column to the table on the report where I would like to convert the value of "High", "Medium" and "Low" to 3,2,1 respectively then SUM these numbers.

Is this possible? I've tried several variations of the code below--maybe it's not possible to do what I want? Thanks again for your time and help.



Fields!PP.Value is set to:
=Switch(Fields!Avail_Rank.Value = "High", 3, Fields!Avail_Rank.Value = "Medium", 2, Fields!Avail_Rank.Value = "Low", 1)

=Switch(Fields!Volume.Value = "High", 3, Fields!Volume.Value = "Medium", 2, Fields!Volume.Value = "Low", 1)

=Switch(Fields!Integ_Rank.Value = "High", 3, Fields!Integ_Rank.Value = "Medium", 2, Fields!Integ_Rank.Value = "Low", 1)

=Sum(Fields!Avail_Rank.Value + Fields!Volume.Value + Fields!Integ_Rank)

View 3 Replies


ADVERTISEMENT

ALTER TABLE SWITCH PARTITION On A Replicated Table

Apr 10, 2007

A customer wants to implement table partitioning on a replicated table.



They want to hold 13 months of data in the table and roll off the earliest/oldest month to an identical archive table. The table has a date field and partitioning by month makes sense all around.



So SWITCH PARTITION is the obvious solution to this, except for the fact that the table is replicated (transactional w/no subscriber updates).



What are his architectural or practical solutions to using table partitioning and replication?











thx

View 5 Replies View Related

Table Switch Won't!

Aug 17, 2007

I am trying my first sliding partition scheme with 2005, and I am getting the following error...


ALTER TABLE SWITCH statement failed. Check constraints or partition function of source table "ScanStoreAggregateLoad' allows values that are not allowed by check constraints or partition function on target table "ScanStoreAggregateTest'.


I have gone over the functions and constraints a gazillion times. The columns are set to Not Null. The constraints are set to AND NOT NULL. The constraint values align and align with the function. But still I get the failure. Any help would be greatly appreciated. Here are the definitions:


CREATE PARTITION FUNCTION pfn_ScanStoreAggregate(int)

AS

RANGE LEFT FOR VALUES

(19224,

19225,

19226,

19227)


CREATE TABLE dbo.ScanStoreAggregateTest(

ProductID int NOT NULL,

DateKey int NOT NULL CONSTRAINT ck_ScanStoreAggregateRange CHECK ((DateKey BETWEEN 19224 AND 19227) AND (DateKey IS NOT NULL)),

Span tinyint NOT NULL,

LocationID smallint NOT NULL,

WeeksTY tinyint NOT NULL,

WeeksLY tinyint NOT NULL,

UnitsTY numeric(12, 2) NOT NULL,

UnitsLY numeric(12, 2) NOT NULL,

SalesTY money NOT NULL,

SalesLY money NOT NULL,

CostTY money NOT NULL,

CostLY money NOT NULL,

ACVTY money NOT NULL,

ACVLY money NOT NULL,

SalesPerMMACVTY money NOT NULL,

SalesPerMMACVLY money NOT NULL,

) ON ps_ScanStoreAggregate (DateKey)


CREATE TABLE dbo.ScanStoreAggregateLoad(

ProductID int NOT NULL

,DateKey int NOT NULL

,Span tinyint NOT NULL

,LocationID smallint NOT NULL

,WeeksTY tinyint NOT NULL

,WeeksLY tinyint NOT NULL

,UnitsTY numeric(12, 2) NOT NULL

,UnitsLY numeric(12, 2) NOT NULL

,SalesTY money NOT NULL

,SalesLY money NOT NULL

,CostTY money NOT NULL

,CostLY money NOT NULL

,ACVTY money NOT NULL

,ACVLY money NOT NULL

,SalesPerMMACVTY money NOT NULL

,SalesPerMMACVLY money NOT NULL

) ON DataAggregates



ALTER TABLE dbo.ScanStoreAggregateLoad

WITH CHECK

ADD CONSTRAINT ck_ScanStoreAggregate19227_DateKey

CHECK ((DateKey = 19227)

AND (DateKey IS NOT NULL))

View 6 Replies View Related

Proc To Switch Two Values In Table

May 29, 2008

I need to switch two int values in my table, but I have no clue how to do it.  If I switch the 6 to a 5, then I can't distinguish between the 5 that's supposed to be a 5 and the 5 that needs to be a 6. Any help is greatly appreciated - thanks in advance! 

View 1 Replies View Related

Help With ALTER TABLE SWITCH (IDENTITY COLUMNS)

Feb 13, 2008

I am having problem when performing the alter table switch. Both tables are identical and have pk.

ALTER TABLE SWITCH statement failed. There is no identical index in source table 'LocalDeltanet.dbo.testresults' for the index 'PKIDX_testSummary' in target table 'LocalDeltanet.dbo.testresults_part' .



CONSTRAINT [PKIDX_testSummary] PRIMARY KEY CLUSTERED

( [testresult_id] ASC )

WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON)

ON TResultsScheme (testresult_id) ) ON TResultsScheme (testresult_id)


I have performed the function on other tables successfully, but this is the first that has an identity column involved. Is there anything special that needs to be done?



[testresult_id] [int] IDENTITY(1,1) NOT NULL,

View 11 Replies View Related

SQL 2012 :: Table Partitioning - Switch Out / Merge Range

Mar 6, 2014

If the partitioning MERGE command attempts to drop historic data at the wrong boundary point then data movement between file groups may be necessary before or during the next index rebuild. The script below creates 2 test tables, one using a range right function and the other using range left. The partitioning key is a number between 0 - 59, an empty partition is maintained at the start and end of ranges, 4 partitions contain data in the ranges between 0-14, 15-29, 30-44, 45-59. Data in the lowest range (0 - 14) is switched out and a merge command is run, edit the script to try the different merge boundaries, edit the variables at the start to suit runtime environment 'Data Drive' & 'Log Drive' paths.Variables are redeclared but commented out at the start of code blocks to allow stepping through if desired.

--=================================================================================
-- PartitionLabSetup_20140330.sql - TAKES ABOUT 1 MINUTE TO EXECUTE
-- Creates a test database (workspace)
-- Adds file groups and files
-- Creates partition functions and schema's
-- Creates and populates 2 partitioned tables (PartitionedRight & PartitionedLeft)

[Code] ....

The T-SQL code below illustrates one of the problems caused by MERGE at the wrong boundary point. File Group 3 of the Range Right table is empty according to the data space views, it cannot be dropped though. File Group 2 contains data according to the views but you are allowed to drop it's file.

USE workspace;
DROP TABLE dbo.PartitionedRightOut;

USE master;
ALTER DATABASE workspace
REMOVE FILE PartitionedRight_f3 ;
--Msg 5042, Level 16, State 1, Line 2
--The file 'PartitionedRight_f3 ' cannot be removed because it is not empty.

ALTER DATABASE workspace
REMOVE FILE PartitionedRight_f2 ;

-- Works surprisingly although contains data according to system views.

If the wrong boundary point is used then the system 'Data Space' views show where the data should be (FG2), not where it actually still is (FG3). You can't tell if data movement between file groups is pending and the file group files are not protected from deletion by the OS.

I'm not sure this is worth raising a connect item for but it would be useful knowing where data physically resided after a MERGE RANGE and before an INDEX REBUILD, the data space views reflect the logical rather than the physical location if a data movement is pending.

View 0 Replies View Related

How To Switch Off Automatic Blanking Of Table Views In Enterprise Manager ?

Aug 10, 2006

Hi Sqlserver experts,I use the SQL Server enterprise manager of MSSQL 2000 regularly.I'm often annoyed by the automatic blanking of the table views.If this happens then mostly with the hint :"The Results pane have been cleared to conserve server resources.To re-establish the result set, run query again."Is there any possibility to switch that blanking off ?Best regards,Daniel Wetzler

View 5 Replies View Related

Altered Table-changed Column From Text To Varchar And Now Having Issues With Alter Switch

Feb 14, 2008

Working on partitioning a few large tables. One of the tables included a text column and the €śTEXTIMAGE_ON [PRIMARY]€? clause which would prevent the partitioning of this table. After some research we found that the data was legacy and no longer used. We updated the column on the affected rows to NULLS and altered the column to a VARCHAR(20)
When I attempted to run the ALTER TABLE SWITCH I encountered the error
Msg 4947, Level 16, State 1, Line 1
ALTER TABLE SWITCH statement failed. There is no identical index in source table 'LocalDeltanet.dbo.testresultsjoe' for the index 'PKIDX_testSummary' in target table 'LocalDeltanet.dbo.testresults_part'.
After a lot of grief and testing I determined that the message was bogus and the real issue is that the 'sys.tables' still has €ślob_data_space_id€? with a value of 1 for this table.
I created a copy of the table with the text column altered to varchar and one with just the varchar to begin with. After copying data from the original table, I tried to run the alter switch. It failed once again for the text column altered to varchar table, but it worked for the varchar from the start.

Since it appears that this value is causing my issues, is there anyway to update the table in place. I know I can BCP the data out, but that would take too long and would defeat the advantage of using the alter switch method.

BOL States:

The allow updates option is still present in the sp_configure stored procedure, although its functionality is unavailable in Microsoft SQL Server 2005 (the setting has no effect). In SQL Server 2005, direct updates to the system tables are not supported. This means we cannot update the table manually.

Thanks

View 1 Replies View Related

Any Editor For Rdlc?

Nov 2, 2007

I would like to use SQL client-side reporting in ASP.NET. However, our customer would like to edit the report sometimes, is there any existing graphical editor to edit .rdlc file?
Thanks.

View 1 Replies View Related

How To Set Page In RDLC?

Mar 31, 2008

I am using Local Report, .RDLC, I want to Set PageName A4, How Can I set PageName in Report .RDLC??

I can set Page Size but I wan to Set Page Name.


Thanking You.

View 1 Replies View Related

Rdlc Reports

Feb 26, 2008



I am having a rdlc report in which i have to fit the image. I dragged and dropped the Image from the toolbox. I am able to get the Image but if the image is small i want to get small or else if the image is big i want to get big image . At the moment i am getting same for both of them. I am using VB.net to get the Image and sql2005. Any solution for this....

View 1 Replies View Related

RDLC Vs RDL Revisited

May 8, 2007

I have searched the archive of this forum, and based on some previous answers have read the followin FAQ



http://www.gotreportviewer.com/



However, even so, I still have a questoin about when to use RDLC vs RDL from the point of view of licensing and load sharing betwee DB and report server.



1. As we all know that SSRS will take a license of SQL Server if the web service is deployed on any other machine other than SQL Server (which is normally the case because no serious DBA will allow IIS apps to be installed on the DB Server). Also, if the SSRS is deployed on NLB cluster then each node of the cluster would need a "SQL Enterprise" license. (which can be very expensive).

2. Co deploying the SSRS with SQL Server is a bad idea because it puts excessive load on the DB+Report Server.

3. Since there is no "load balancing" in SQL all the rendering has to be done by the SSRS service which is running on the DB Server.



Now compare this to RDLC



1. RDLC gives me the same engine as RDL

2. However it has no licensing tags to it.

3. I can deploy ASP.NET report viewer on my web farm and scale it out as much as I like.

4. Extract data from the DB using stored procedures.



So it seems that RDLC solution is cheaper, gives better scale out capabilities and also moves the rendering of reports on the web farm rather than the Report Server.



Why should me or anyone else choose RDL at all?



There seems to be one disadvantage that the data has to fetched programmatically and manually binded (like an ASP.NET app) as RDLC does not provide any feature to connect to data sources. But this is not much when you see the cost and scalability benefits.



regards,

Abhishek.

View 6 Replies View Related

Add Serial No In Report.rdlc

Jun 20, 2007

hi forum

how to add Serial No in "Report.rdlc". I want to add SNo. in as a extra field in Report.

SNo. ItemName Price

1 abc 10

2 xyz 20

View 5 Replies View Related

Converting .rdl To .rdlc Files.....help!

May 9, 2007

Hey there guys!

I am trying to convert, (as the title suggests), an already created .rdl file to a .rdlc file. I have googled it and yes came across the most informative "step-by-step", however even after renaming to .rdlc and opening the file in SQL Server 2005 BI the file is still not being deserialized using the reportdefinition from 2005.



Can somebody please help with this and provide me with something a little clearer than "...you must convert the file.".

Thanks in advance for all your help,

Ron

View 3 Replies View Related

RDLC Report Formatting Issues

Mar 9, 2007

We have developed client SQL Server Reporting Services reports (rdlc) that are completely dynamic.

Everything on the report itself is build from code.

There are a few problems in the formatting of these reports that we have not been able to correct.

1) Because of the way the data has to be displayed. we have had to use a List control with Textboxes and Lines within to give the appearance of a table.(Column headers are textboxes with background set to gray). Line controls exist between each column of data. We did this because we need to have nested lists in some cases to display the data.

The height of the listbox is adjusted to fit the contents within. The vertical lines between the columns appear broken with gaps between each item.

Is there any way to set the line height to automatically fit the height of the ListBox.

2) Another issue we have is with Texboxes. If there is no value in the Textbox, the borders do not show. CanShrink is set to false. Hidden is false. Is there any other setting or something else that could be causing this?

View 1 Replies View Related

Can You Encrypt The Rdlc Xml File To Keep Someone From Changing It?

Feb 21, 2008

this idea goes with my post on licensing reports. Is it possible to deploy an encrypted rdlc file and have custom SSRS pages that will decrypt it, run it, manage it, etc? We were thinking what is the point of custom SSRS pages for licensing if the rdlc is just a plain xml file any one can see, change, copy, etc.


thanks

View 1 Replies View Related

Can We A Use A CSS Or Equivalent For A Reports(RDLC File)

Jul 3, 2007

Hi,





I will be using RDLC files to display reports in various pages.





My Question is this.



I need to use the same type of formatting of color,fonts,font sizes and the background colors so that the same can be used across the reports.



This is somewhat like using a CSS file for aspx pages.



Any ideas... , solution........, .......

View 8 Replies View Related

RDLC And Excel - No Grid Lines

Jul 9, 2007

Using ASP.NET 2, C#, Web application, we have an rdlc report which will be primarily used to export to an Excel spreadsheet. When we run thw report, then export it, we wind up with a spreadsheet with no gridlines, eg a spreadsheet with invisible cell borders.

Is the a setting or property somewhere which can be changed so that the spreadsheet which opens after the export looks like a standard spreadsheet, that is, with visible cell borders?

Many thanks
Mike Thomas

View 2 Replies View Related

Passing String To Rdlc's TextBox

Jan 23, 2008



Hello
I am pretty new to reporting services. Now i have something like this. on the .cs file, i have a fullName lets say
String fullName = "John Smith",
Now I want to pass this string to the report's textBox and show this value on this textbox.

How can i do this?
1.How should i write in .cs file?
2. How should i set the expression for the textbox?

Thank you very much. It is very urgent! Please help!

View 6 Replies View Related

Work Around To Display RTF Text In RDLC?

Apr 18, 2008



Hi,

We had come a long way in implementing reports using RDLC and now we are stuck with the requirement to display RTF text using RDLC.

Is there a way to display a RTF Text in RDLC in a purely managed code?

The links mentioned below provides a work around solution to this but a part of its implementation is in un-managed code.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=551939&SiteID=1

http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=738557&SiteID=1

Iam also curious to know if Microsoft has released a patch or service pack that supports RTF in RDLC?

Iam using .NET 3.0 with SP1 and my backend is MS-SQL Server 2005 Express Edition.

Thanks & Regards
Arvind T N

View 1 Replies View Related

Stream A Rdlc Report From Dll To Browser

Apr 22, 2008

I have a very simple test report created in Visual Studio 2005 as an rdlc file in my dll. The rdlc file is in the dll because it is built off of the business objects. I need to be able to stream this file (i.e. not use a report viewer) to the browser.

I found code that I included below, but get an error:

The report definition for report 'Monkey.Report1' has not been specified

Yes my test namespace in my dll is named "Monkey" )

Anyway, any idea on how to solve this?





Code Snippet
using Microsoft.Reporting.WebForms;

protected void Page_Load(object sender, EventArgs e)
{
LocalReport localReport = new LocalReport();
localReport.ReportEmbeddedResource = "Monkey.Report1.rdlc";

ReportDataSource reportDataSource = new ReportDataSource("FamilyCollection", Monkey.Family.RetrieveAll());
localReport.DataSources.Add(reportDataSource);

string reportType = "PDF";
string mimeType;
string encoding;
string fileNameExtension;

string deviceInfo =
"<DeviceInfo>" +
" <OutputFormat>PDF</OutputFormat>" +
" <PageWidth>8.5in</PageWidth>" +
" <PageHeight>11in</PageHeight>" +
" <MarginTop>0.5in</MarginTop>" +
" <MarginLeft>1in</MarginLeft>" +
" <MarginRight>1in</MarginRight>" +
" <MarginBottom>0.5in</MarginBottom>" +
"</DeviceInfo>";

Warning[] warnings;
string[] streams;
byte[] renderedBytes;

//Render the report
renderedBytes = localReport.Render(reportType, deviceInfo, out mimeType, out encoding, out fileNameExtension, out streams, out warnings);

//Clear the response stream and write the bytes to the outputstream
Response.Clear();
Response.ContentType = mimeType;
Response.AddHeader("content-disposition", "attachment; filename=foo." + fileNameExtension);
Response.BinaryWrite(renderedBytes);
Response.End();
}

View 1 Replies View Related

Bind Object To RDLC Report

Apr 8, 2006

Hi,all
I hava a question about Bind object to RDLC Report,the RDLC like
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns="http://schemas.microsoft.com/sqlserver/reporting/2005/01/reportdefinition" xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner">
  <DataSources>
    <DataSource Name="DummyDataSource">
      <ConnectionProperties>
        <ConnectString />
        <DataProvider>SQL</DataProvider>
      </ConnectionProperties>
      <rd:DataSourceID>47739726-cc8c-4719-b061-c392c2cceb68</rd:DataSourceID>
    </DataSource>
  </DataSources>
  <BottomMargin>2.5cm</BottomMargin>
  <RightMargin>2.5cm</RightMargin>
  <PageWidth>21cm</PageWidth>
  <rd:DrawGrid>true</rd:DrawGrid>
  <InteractiveWidth>21cm</InteractiveWidth>
  <rd:GridSpacing>0.25cm</rd:GridSpacing>
  <rd:SnapToGrid>true</rd:SnapToGrid>
  <Body>
    <ColumnSpacing>1cm</ColumnSpacing>
    <ReportItems>
      <Table Name="table1">
        <Footer>
          <TableRows>
            <TableRow>
              <TableCells>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="textbox7">
                      <rd:DefaultName>textbox7</rd:DefaultName>
                      <ZIndex>7</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value />
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="textbox8">
                      <rd:DefaultName>textbox8</rd:DefaultName>
                      <ZIndex>6</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value />
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="textbox6">
                      <rd:DefaultName>textbox6</rd:DefaultName>
                      <ZIndex>5</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value />
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="textbox9">
                      <rd:DefaultName>textbox9</rd:DefaultName>
                      <ZIndex>4</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value />
                    </Textbox>
                  </ReportItems>
                </TableCell>
              </TableCells>
              <Height>0.63492cm</Height>
            </TableRow>
          </TableRows>
        </Footer>
        <DataSetName>WindowsApplication1_MedcialCase</DataSetName>
        <Top>0.25cm</Top>
        <Details>
          <TableRows>
            <TableRow>
              <TableCells>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="ID">
                      <rd:DefaultName>ID</rd:DefaultName>
                      <ZIndex>3</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value>=Fields!ID.Value</Value>
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="Name">
                      <rd:DefaultName>Name</rd:DefaultName>
                      <ZIndex>2</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value>=Fields!PatientOfMedcialCase.Value.Name.Value</Value>
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="Name_1">
                      <rd:DefaultName>Name_1</rd:DefaultName>
                      <ZIndex>1</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value>=Fields!Name.Value</Value>
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="PatientOfMedcialCase">
                      <rd:DefaultName>PatientOfMedcialCase</rd:DefaultName>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value>=Fields!PatientOfMedcialCase.Value</Value>
                    </Textbox>
                  </ReportItems>
                </TableCell>
              </TableCells>
              <Height>0.63492cm</Height>
            </TableRow>
          </TableRows>
        </Details>
        <Header>
          <TableRows>
            <TableRow>
              <TableCells>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="textbox1">
                      <rd:DefaultName>textbox1</rd:DefaultName>
                      <ZIndex>11</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value>ID</Value>
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="textbox2">
                      <rd:DefaultName>textbox2</rd:DefaultName>
                      <ZIndex>10</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value>Name</Value>
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="textbox4">
                      <rd:DefaultName>textbox4</rd:DefaultName>
                      <ZIndex>9</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value>Name</Value>
                    </Textbox>
                  </ReportItems>
                </TableCell>
                <TableCell>
                  <ReportItems>
                    <Textbox Name="textbox3">
                      <rd:DefaultName>textbox3</rd:DefaultName>
                      <ZIndex>8</ZIndex>
                      <Style>
                        <PaddingLeft>2pt</PaddingLeft>
                        <PaddingBottom>2pt</PaddingBottom>
                        <PaddingRight>2pt</PaddingRight>
                        <PaddingTop>2pt</PaddingTop>
                      </Style>
                      <CanGrow>true</CanGrow>
                      <Value>Patient Of Medcial Case</Value>
                    </Textbox>
                  </ReportItems>
                </TableCell>
              </TableCells>
              <Height>0.63492cm</Height>
            </TableRow>
          </TableRows>
        </Header>
        <TableColumns>
          <TableColumn>
            <Width>5.33333cm</Width>
          </TableColumn>
          <TableColumn>
            <Width>8cm</Width>
          </TableColumn>
          <TableColumn>
            <Width>5.33333cm</Width>
          </TableColumn>
          <TableColumn>
            <Width>5.33333cm</Width>
          </TableColumn>
        </TableColumns>
        <Height>1.90476cm</Height>
      </Table>
    </ReportItems>
    <Height>5cm</Height>
  </Body>
  <rd:ReportID>a69b2d8e-258a-4212-8d4a-c67c96055732</rd:ReportID>
  <LeftMargin>2.5cm</LeftMargin>
  <DataSets>
    <DataSet Name="WindowsApplication1_MedcialCase">
      <rd:DataSetInfo>
        <rd:DataSetName>WindowsApplication1</rd:DataSetName>
        <rd:ObjectDataSourceType>WindowsApplication1.MedcialCase, WindowsApplication1, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null</rd:ObjectDataSourceType>
        <rd:TableName>MedcialCase</rd:TableName>
      </rd:DataSetInfo>
      <Query>
        <rd:UseGenericDesigner>true</rd:UseGenericDesigner>
        <CommandText />
        <DataSourceName>DummyDataSource</DataSourceName>
      </Query>
      <Fields>
        <Field Name="ID">
          <rd:TypeName>System.Guid</rd:TypeName>
          <DataField>ID</DataField>
        </Field>
        <Field Name="PatientOfMedcialCase">
          <rd:TypeName>WindowsApplication1.Patient</rd:TypeName>
          <DataField>PatientOfMedcialCase</DataField>
        </Field>
        <Field Name="Name">
          <rd:TypeName>System.String</rd:TypeName>
          <DataField>Name</DataField>
        </Field>
      </Fields>
    </DataSet>
  </DataSets>
  <Width>24cm</Width>
  <InteractiveHeight>29.7cm</InteractiveHeight>
  <Language>en-US</Language>
  <TopMargin>2.5cm</TopMargin>
  <PageHeight>29.7cm</PageHeight>
</Report>

the object I bind  to the Report like

public class MedcialCase
    {
        private Guid iD;

        public Guid ID
        {
            get { return iD; }
            set { iD = value; }
        }

        private Patient patient;

        public Patient PatientOfMedcialCase
        {
            get { return patient; }
            set { patient = value; }
        }

    }

    public class Patient
    {
        private string name;

        public string Name
        {
            get { return name; }
            set { name = value; }
        }

    }

and the code bind object to report like

  MedcialCase medcialCase = new MedcialCase();
  medcialCase.ID = Guid.NewGuid();
  Patient patient = new Patient();
  patient.Name = "Michael";
  medcialCase.PatientOfMedcialCase = patient;
  this.MedcialCaseBindingSource.DataSource = medcialCase;
  this.reportViewer1.RefreshReport();

I choose the MedcialCase.ID and MedcialCase.PatientOfMedcialCase.Name to show, but when the report was run ,,just MedcialCase.ID has been shown,
the text of MedcialCase.PatientOfMedcialCase.Name is "=Fields!Name.Value"

I modify it to "=Fields!PatientOfMedcialCase.Value.Name.Value" and run it ,the "#Error" show in the text of Name

anyone can tell me why?and how to bind object like MedcialCase to the Report?

thanks!

 

View 9 Replies View Related

Render Html In .RDLC Reports

Jun 8, 2007

Hi all,



I am using the asp.net web application and microsoft visual studio reportviewer control and rdlc for creating a report ( not using sql server reporting). I used the Product table to view the result. It has five fields and I display all the itemsin the report. One field is Description and it store the html code as the value(eg:<div><ul><li>a</li><li>b</li></ul><b>aaaa</b></div>). I want to disply the output of this html code in my report's description field. But in my report, it shows the html value that I stored in my table (:<div><ul><li>a</li><li>b</li></ul><b>aaaa</b></div>). How can I render the html in my report. Please give me a solution.

View 6 Replies View Related

Local Report (RDLC) Formatting

Feb 22, 2007

I cannot find anything that would suggest it is possible to use a cascading style sheet when formatting data elements within a local report (RDLC). We created an HTML report using CSS and now want to generate the same report using the Report Viewer control along with our defined styles.

Any ideas?

thank you

View 1 Replies View Related

Create Report.rdlc In Vb.net Dynamically

Oct 23, 2007

I' m using Microsoft Reporting. Is there a way to create Report .rdlc file Dynamically on the fly? I' m using VB.net.
Any help can be appreciated.
Thanks
Mythili

View 9 Replies View Related

Rdlc Code Based DataSource?

Oct 24, 2007

Hi All,
Can I create a code based (vb.net) datasource for a report? I am using VS studio and really do not like the GUI based datasets/tables. They are a big hassle to manipulate. It is much easier to create them in code. But how do I make the dataset "visible" to the report.

The reports in VS studio seem very limited, they do not seem allow much programming?

Thanks,
Skip

View 11 Replies View Related

/3GB Switch

Sep 2, 2007

Hi All
Server 2003 standard edition, MSsql 2005 standard edition
As I understand it server 2003 standard only supports 4gb. Does this mean I can only use up to 4gb as the maximum memory for server 2005?
If that is the case I would like to use the 3GB switch, and leave the other gig for other apps. If I set the 3GB switch in boot.ini do I then also have to enable AWE (which I can't seem to do) or can I forget about AWE altogether?

Many thanks
Martin

View 5 Replies View Related

3gb Switch And AWE

Apr 10, 2007

in configuring AWE whether i need use both 3GB in boot.ini and AWE Enabling option in SQL Server

View 3 Replies View Related

How Do I Asign A Textbox In A Rdlc Report A Declared Value?

Apr 8, 2007



Hi all..

I developed a local report to be viewed using the "Report Viewer" control. The report is attached to an object data source.

All works perfectly, now I want to display a declared value (from the form containing the report viewer) in a textbox. Like:

Dim NofDays as string

Me.ReportViewer1.LocalReport.textbox6.text = NofDays



I ve tried a lot of options like using the report paramaters but I cannot get it to work.

Does aneyone have a clue?

Thankzzzzzz

Juststar

View 5 Replies View Related

Oracle Stored Procedure For RDLC Dataset

Aug 20, 2007

Is it possible to use an Oracle Stored Procedure for an RDLC report. There are posts I've read that deal with RDL reports that use the data tab and command type of "Stored Procedure", but I don't have that installed. I just create a new dataset that the report uses. I can do reports just fine with SQL statements, but I want to be able to call a stored procedure...

Thanks

View 1 Replies View Related

Remove #ERROR Text On Rdlc Textbox

May 19, 2008

Hi!

I use LINQ to SQL for showing reports, everything works fine but when I do something like


Fields!Order.Value.Customer.Address.StreetName it will show The addressStreet value

but if Customer or Address object value is null Textbox will output #ERROR message.

How can I get rid of this, is there any way to override the Textbox control?

View 5 Replies View Related

Adding 3 Gig Switch

Dec 12, 2002

Hi,

We have a standard Win 2K server and SQL2000 Enterprise edition on our DELL server.

Will it be possible to add a /3 Gig switch to boot.ini and make sql server to use 3 gig of RAM and the OS with 1 Gig of RAM.

This a live server website with heavy transactions more than 100 Transactions per minute.

We are planning to do a Transactional replication against 4 databases (publisher) with remote ditributor.

The reason why I am asking about this RAM increase is for this replication. Or is it Ok to have the 2 Gig RAM for this environment +replication.

Please give me a suggestion, how to proceed with this issue as i am concerned about memory especially for replication.

(4 Database sizes are 20 gig,7 gig,5 gig,5 gig)

Thanks,
Anu

View 10 Replies View Related

Date Switch

Nov 9, 2005

How do I replace month with day value and day value with month.
Example:
2005-02-09 00:00:00.000
replace with
2005-09-02 00:00:00.000

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved