I have an SSIS Package that executes a stored procedure. It turns out my stored procedure was missing.
However, the SQL Job Scheduler reported that step as success.
Can anyone tell me why?
`Le
HI,
I am having a strange error coming in SQL server 2005.
I had a DTS package developed in SQl server 2000. Then i had migrated that DTS package to SSIS package using Execute DTS 2000 package. The conversion is successfull.
Then when i manullt execute this package it runs successfully without giving any error.
But then wheh i schedule a SQL server agent job for the same above SSIS package it fails giving me some cryptographic error as follows:
Message
Executed as user: CATOS-CGDBTUW02SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "SQLPassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:01.00 Code: 0x00000000 Source: Execute DTS 2000 Package T... The package execution fa... The step failed.
Not sure why is this happening.
Manually running the SSIS package from Visual studio does not gives error, but the same SSIS package when is been schedule from SQL server 2005's SQL server agent job it fails giving above error.
Please help me out how to rectify whith this.
Thanks.. in advance
Regards,
Ashok
I recently upgrade my Enterprise Manager to Sql 2000 from 7.0; the databases are still SQL 7.0. Since then I've noticed that all scheduled jobs that are calling dtsrun.exe's are reporting successful but do not actually run. I think the total process time is 1 sec.The message from View History reports: "The step did not generate any output. Process Exit Code 0. The step succeeded." Every job that uses the dtsrun.exe reports the same message. I've ran the same command from DOS and it runs fine. I've executed some basic batch commands within the Scheduled Jobs and those fail as well. I can open the DTS package and execute those with success, but when these are scheduled and are executed from the Agent Jobs they fail. Can anyone shed some light on this please?
Thanks,
Jeff
Hi
I've created a simple package that contains only one task that is an execute sql task. When I run only this single task from Business Intelligence development studio it runs successfully. But when I run the whole package (also from Business intlligence studio), the package fails.
The data source I access is ODBC. I'm sure the real reason for the error is the bad ODBC driver of the data source but this can't be changed. So I need to know what is different from running only a task in a package to running the whole package. If I knew that I might be able to adjust some setting and make it work.
Any help welcome.
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I have a Local DTS Package which will execute fine...no problems. When I try to schedule it from my NT 4.0 Workstation to the NT 4.0 Server, I get the job scheduling dialog box...fill it out...click OK...and NOTHING.
No error message, nothing in the SQL error log, nothing in the NT logs, no job in the schedule! When I perform the same task at the server logged in as Administrator it schedules successfully.
Any feedback would be greatly appreciated.
Eric
Hi there,
I have followed the steps in BOL (not too complex really) to schedule a package in SQL Server
Agent.
My package reads out Data from the SQL Server and writes some log into a file. It is encrypted
by a password and is stored to the filesystem.
Executing the pkg via dtexec works fine.
Then I've created a new job with one step via SQL Server Management Studio, added
the package and password when prompted.
I took the command line params and used them with dtexec: It woked.
I started the job manually from SQL Server Management Studio by selecting "start job"
from the context menu.
But when I try to schedule the job nothing happens. The only trace I can find is a warning in
the SQL Server Agent Error Logs:
"[162] Internal request (from SetJobNextRunDate [reason: schedule will not run again]) to deactivate schedule 2"
This is inherent when you configure a schedule to go off once.
Thanks in advance
Fridtjof
I created a SSIS package that imports a file then moves the file to a folder called processed.
I created a job that runs the package. The pack works fine when I run it from the SQL Storage Area. When I run the job I get the following message:
Started: 9:58:15 AM DTExec: The package execution returned DTSER_SUCCESS (0). Started: 9:58:15 AM Finished: 9:58:21 AM Elapsed: 6.047 seconds. The package executed successfully. The step succeeded.
showing that the job supposedly completed successfully.
I know that the package the not run because the data did not get imported and the file did not move.
Can anyone explain the package may not run but we still get a job completion status of success?
Using the "set values" tab, I am trying to set the values of package variables to strings that contain spaces and/or dashes. If I run the package using the integrations services server, it runs perfectly. If I schedule the package on SQL Server agent, I get the following error.
"Executed as user: GBPSQLServer. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Option "-restofstring" is not valid. The command line parameters are invalid. The step failed."
Looking at the command line generated by the SQL Agent interface, the value is quoted using double quotes like this:
/SQL "PackageName" /SERVER SQL1 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /SET "Package.Variables[LogFolder].Value";"\remoteservernameinetpub he-restofstring
estofstring" /REPORTING E
It seems that the command line parser is not recognising the quotes, or maybe the slashes are throwing it off, or sql server agent is doing something funny to the command line before it executes it.
Anybody got any ideas?
I have configured smtp email in MS sql server and configure email to schedular job when schedular jobs become failed. Can i configure email so that email will be sent from scheduler job on both success of job and Failure of job?
View 3 Replies View RelatedI'm debugging a SSIS package in Visual Studio and I have a task that failes but the overall package is reporting success. The deployed package in SQL2005 is doing the same thing.
Task failed: FactVisitApplicationInventory
SSIS package "PACE to PACE DW PROD.dtsx" finished: Success.
The program '[4652] PACE to PACE DW PROD.dtsx: DTS' has exited with code 0 (0x0).
I have set FailPackageOnFailure=True, FailParentOnFailure=True, and MaximumErrorCount=0 on this task and am executing just this single task in Studio and I can't get the Package to report a failure.
Any ideas?
Hi,
I have created a simple SSIS package using BIDS which does data copy from SQL Server to a excel file
I'm able to execute it using dtexec command locally connecting to the remote db server.
We have a file shared server where we are keeping the dtsx files.
Our DB server is located on another server.
We have another file shared server where Tidal agent is installed and we have created a batch file which has the dtsexec command and this batch is kept here.
Now when I create a job and run it it gives us the following outputCode: 0xC0014019
Source: tidal_jobtest
Description: The connection manager "dbserver.database.db_user" will not acquire a connection because the package OfflineMode property is TRUE. When the OfflineMode is TRUE, connections cannot be acquired.
End Error
Error: 2007-05-04 09:09:58.06
Code: 0xC020801C
Source: Data Flow Task OLE DB Source [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "dbserver.database.db_user" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2007-05-04 09:09:58.06
Code: 0xC004701A
Source: Data Flow Task DTS.Pipeline
Description: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC020801C.
End Error
I have checked the SSIS package properties and the offline mode property is set to false but still i get the same error.
Also Can anyone let me know how to check whether we are using 32bit or 64bit drivers in connection or for dtsexec command
Please help me on this
regards
Prasad
Hello
As a beginner I have created some Packages to import Data to SQL Server.
The Packages are running well.
I have created a Task to run the Package on a SQL SERVER 2005 Express. The Task starts.
Then a Execute Package Wizard Picture appears on the Screen.
I have mannually to select the Connection Manager and the Connection String.
After the selection the Task runs without any Problem.
Now I like to get the Task to run without any manual intervention.
I was looking in Internet but could not find a solution.
Can someone give me a hint how to get the Task working without intervention?
Thanks for an early answer.
Regards
Chaepp
Hi,
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client.
But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Regards,
Roopa.
Hi,
I have created the package in a local machine and would like to schedule the package without integration services.
Is there any workaround for the above scenario.
Thanks in advance
Regards
Ramesh.R
Hi All
I'm new in SSIS Development. I have manage to design and deploy my Package to production SQL(MSDB) Security rely on server storage.
The problem start when I start scheduling in SQL JOB I'm getting the following error.
Executed as user: UCC-SQLSYSTEM. ...ion 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 8:57:01 AM Error: 2008-05-12 08:57:02.08 Code: 0xC0202009 Source: Test_deployment_Table Connection manager "BLAKE-DBN12.Staging" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Communication link failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'BLAKEUCC-SQL$'.". End Error Error: 2008-05-12 08:57:02.08 Code: 0xC020801C Source: Data Flow Task Test_Deployment [97] ... The package execution fa... The step failed.
What can I do to avoid this.
Hi All
I have created a SSIS Package to complete various tasks and I have managed to deploy it on SQL, however I can't find it in the Management Studio. I just want to be able to schedule this package to run as a job.
Any Ideas?
Hi ,
How do I schedule SSIS package.
Hi
I am trying to scheduling package using "Executing Sql Server Agent Task" before that I create new job,But there is error in STEP "Command Line Parameter are Invalid"
Anybody help me for configure jobs for Scheduling
I am new to SQL Server
Thanks in Advance
Hi,
I want to schedule an SSIS package to run always. So I tried scheduling the SSIS Package as a Job in the SQL Server Agent and I have set the Schedule Type as "Start automatically when SQL Server Agent Starts".
I have used an WMI Event Watcher task to raise an event when the file dropped in a folder.
And I have provided the configuration file also properly in the job. But still my package is not running properly. The application is running, but it is not raising any events even when the files are dropped in that folder.
Pls anyone of you provide some solution for this.
Thanks & Regards,
Prakash Srinivasan
Hi
I have a strange scheduling problem.
I have a job, i test it through BIDS - Works
I test it through SSMS - works
I run the job - Works
I schedule for a run time job - Works
I schedule for a recurring job - Works
However (here is the really annoying part) it fails to run at the night run (11.20PM)
there are 6 other packages that run fine after it , 11.30 , 1AM .. 4 AM etc ...
So
last night I changed the package to run at a later time, and it worked, but the other package that
ran 2nd (which now ran 1st) failed !!
its almost as if the 1st package has to fail !!!!!
When i look at the history and detailed log all it says is "The step Failed"
anyway , I can set up a workaround by starting a dummy job that is supposed to fail..
FYI the jobs are run under administrator and they are protected by a password (encryptSensitiveWithpassword) .
I am getting an error when I try to schedule a package. I can run the package with no problems from BIDS. For some reason it is throwing an error when I try to schedule the package using SQL Server Agent. Information on how to resove this would be greatly appreciated.
Executed as user: MACHINESYSTEM. ...n 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:41:55 PM Error: 2007-02-19 17:41:56.01 Code: 0xC0011007 Source: {48427B5A-10F6-4054-B7EB-F0F19B90F334} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2007-02-19 17:41:56.01 Code: 0xC0011002 Source: {48427B5A-10F6-4054-B7EB-F0F19B90F334} Description: Failed to open package file "C:Documents and Settingsfirst.lastMy DocumentsVisual Studio 2005ProjectsPackage 1.dtsx" due to error 0x800C0006 "The system cannot locate the object specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the X... Process Exit Code 4. The step failed.
Hi,
I have created the package in ssis and i want to schedule it local machine without using integration services. Any workaround for scheduling the Package?.
Specify me the steps to configure the package.
Thanks
Regards
Ramesh.R
Hello Everyone,
When i try to scedule a job on SQL Server Management Studio it gives the Following Error:
Unable to cast object of type 'Microsoft.SqlServer.Management.Smo.SimpleObjectKey' to type 'Microsoft.SqlServer.Management.Smo.Agent.JobObjectkey'.(Micorsoft.SqlServer.Smo)
Can anyone tell me why ?
MS SQL Server Details:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
How can i plan the execution of a package ?
For example, i want to execute the package every 2 minutes for all the time.
I do not want to use SQL Server Agent to do this. I want the package to self contained to do it.
Thanks
Rohit
Hi,
When I am trying to schedule the SSIS package and start the job, I am getting the following error. It is not executing properly.
"The job failed. The Job was invoked by User prakash.srinivasan. The last step to run was step 1 (TestSchStep1)."
Pls provide some solution to this.
Thanks in advance.
Regards,
Prakash Srinivasan.
I have created a package that loads data . I need advice on a quik way to schedule this baby .
Regards to ALL
Hey,
I have an SSIS package that invokes a web service and then updates a table. It runs fine as long as I am running it on the local machine. However, as soon as I save this package to the sql server, and try to schedule this as a job, it starts to fail. Now, the web service writes to an xml file and also uses an xsd and and an xsl file. When I save a dts package to the sql server, whats the proper way of referencing these files? I think this probably is what is making the package to fail, ut I am not sure.
Any help is greatly appreciated!!
Thanks!
Hi:
I created a fairly simple SSIS package to move data from a remote server which uses SQL Server Authentication to a local server that uses Windows Authentication. Everything works fine when executing the package within BI studio and if I execute the package by connecting to SSIS. If I schedule it as a SQL Server Agent Job, however, the non-integrated security fails unless I manually edit the connection to include the password. Obviously this is insecure because it is in plain text. What can I do?
Thanks.
Hi, here is my problem:
Because of some usability terms, I need to use SSRS scheduler to determine reports creation frequency (minimum frequency is once a day)I need to use an external scheduler to SSRS in order to launch reports creation daily, after some other batch tasks execution that must be completed before launching report creation.
And I have no idea on how to do that properly. Can somebody help me?
Thanks!
I have an SSIS package that runs just fine in BI but when I go to run it as a job I get this error message:
SQL Server Scheduled Job Status: Failed - Invoked on: 2008-01-25 12:23:08 - Message: The job failed. The Job was invoked by User. The last step to run was step 1 (Step 1).
I have created a credential with domain admin rights and a proxy that uses the credential. The domain admin account is a member of the SQLServer2005SQLAgentUser group. The package protection level is set to EncryptSensitiveWithKey.
Hi,
I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed
Job Properties:
Type: SQL Server Integration Services Package
Run As: SQL Agnet Service Account
Package Source: File System
Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx
Error i got when i execute the job.
Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.
I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?
Thanks,
KD
Okay, I see that dozens of posters have this problem, but none of the threads has a solution: Why does an SSIS package run perfectly fine in VS and in Integration Services, but fail with no details in SQL Agent? Is there another way to have an SSIS package run regularly?
Thanks.