I get 2 errors when I run a job in sql server agent 2005 0xc0202009 and 0x80040E2. I cannot see why I am getting these errors, when I run the job with dtexec it is successful. Also when I run it in the debugger or run the executeable it is successful. But when I try to run it with the agent it fails. Any Ideas would be greatly appriciated.
thank you
Joey Kushinski
when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
Thanks,
Larry
I have a problem when i Want to run the Snapshot Agent in SQL Server 2005. I have done all the tutorial called Replication Data with Mobile Clients and i done the previous tutorial called : Preparing the Server for Replication. But in the Lesson One i can't run the Snapshot Agent but the publicationis good. Can you help me ?
This is the error's code :
Date 25/04/2007 10:44:27
Log Job History (NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2)
Step ID 2
Server NTI-PC-118
Job Name NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2
Step Name Run agent.
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
2007-04-25 09:44:28.29 -Publisher NTI-PC-118
2007-04-25 09:44:28.29 -PublisherDB AdventureWorks
2007-04-25 09:44:28.29 -Publication AdvWorksSalesOrdersMerge
2007-04-25 09:44:28.29 -ReplicationType 2
2007-04-25 09:44:28.29 -Distributor NTI-PC-118
2007-04-25 09:44:28.29 -DistributorSecurityMode 1
2007-04-25 09:44:28.29 -XJOBID 0x893D7BB9E72044489F0A1C1878663E1D
2007-04-25 09:44:28.29 --------------------------------------
2007-04-25 09:44:28.29 Connecting to Distributor 'NTI-PC-118'
2007-04-25 09:44:28.43 The replication agent had encountered an exception.
2007-04-25 09:44:28.43 Source: Replication
2007-04-25 09:44:28.43 Exception Type: Microsoft.SqlServer.Replication.ReplicationAgentSqlException
2007-04-25 09:44:28.43 Exception Message: The remote server "NTI-PC-118" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
2007-04-25 09:44:28.43 Message Code: 14080
2007-04-25 09:44:28.43
Thanks you
I have an execute process task in SSIS that executes a .Net program.When this is running as a Sql Server Agent job in Sql Server 2005, I have no issues. The operating system of the server is Windows Server 2003 R2.
Now I'm trying to get this working as a Sql Server Agent job in Sql Server 2012. The operating system of the server is Windows Server 2012 R2. And now I have issues.
If I run the SSIS package in Visual Studio debug mode, I have no issues! It's only when I try running the same package from a Sql Server Agent job that there are problems. The .Net program errors out with a System.TypeInitializationException.
I thought this might be an issue running the .Net program as 64 bit so I changed the agent setting to 32 bit. That didn't work. I thought it might be an issue with authorization (since I can run it in debug with me as the user). I put in a class in the program that changes the user through impersonation. That didn't work either.
Since I don't have a full-blown version of Visual Studio on the database server, I haven't been able to capture the error and debug the program to see where it is blowing up.
why something like this would work in Sql Server 2005/Windows 2003 but not in Sql Server 2012/Windows 2012 when run as an agent job? And on top of that, why would it work when I run it manually in debug mode but not when run as an agent job?
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009.
Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
It is SQL server 7. Scheduled jobs were running fine until the hard drive crasked. Replace the hard drive and restored the dabases. However, all the scheduled jobs cannot run. I created new jobs using database maintenance plan and it still doesn't work. the same error occurs when viewing the Job history.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
However, if I create a job by right click on the database and select backup database. This job runs fine.
What should I do to make jobs created by the database maintenance plan running again?
Thank you for your help.
If a job is currently running and I want to disable it so that it does not run as scheduled for the following night, will it disrupt the current process?
View 1 Replies View RelatedI've tried finding an answer to this on this website but I don't see any. I'm running SQL Enterprise Manager v8.0 and have a job in the SQL server agent folder that won't run as scheduled nor will it run manually if I Right-Click and choose Start Job.
It's designed to run a DTS. I can run the DTS manually without errors but the job won't run it for me. I will try to provide as many details in this post as I can in hopes that someone who is more experienced at this can help me.
DTS DETAILS
The DTS is designed to transfer data from a table on one server and transfer it through a firewall to another server into a table on that server. Then delete the entries from the originating table. This works very well if I run it manually. The purpose of deleting entries from the web server is for security. Once the data in on the other side of the firewall it's safe.
The job however will not run either manually or from it's schedule. I've tried creating a new job and setting up a very simple schedule that runs daily every 2 minutes for example. I've played around with different times but no luck. So I will try and provide you with job details below:
JOB DETAILS
Name: TransferData
Enabled, Target = Local Server
Category: Uncategorized Local
Description: Execute package: TransferData
STEPS
ID: 1
Step Name: TransferData
Type: Operating System Command
On Success: Quit with Success
On Failure: Quit with Failure
PROPERTIES OF STEP
Step Name: TransferData
Type: Operating System Command (CmdExec)
Command: ( I have no idea what this translates to as I did not write it) DTSRun/~Z0xF6EE76ED6259A60AC370F465DE7F3095F4B37F7176C05B8E72E396DEBE60135E53ACFEDB00E1F216DD8EC8206782439BA435771E3C1E8A7A5D0DAE3F3AAA9F48BF08A9A9FA23C010A85573546F6B6B900323F76DC8A27EACAFD63904464DD5A9B28137
Nothing special in the advanced tab
SCHEDULES TAB
ID: 20
Name: TransferData
Enabled: No
Description: Occurs every 1 day(s), every 2 minute(s) between 12:00:00 AM and 11:59:59 PM
and is setup as Recurring
Nothing in Notifications Tab
I only have two SQL books to reference. This is a production fire to put out and I really need the help here as I am not a certified SQL guru.
I hope I have provided enough information here for someone to help. I'm happy to provide an email address for easier contact should you request it.
Thanks in advance for any assistance with this.
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi,
I ahve attached the bmp doc that will show my screen snapshot.
My SQL server Agent service indicator is not showing green as like other server. I have started the serice and running fine. I don't have any problem running the job.
My curious is why that indicator is not showing up.
Thanks,
Ravi
I get the following error:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'I:MyFolderMyRptsMyApplicationMyDatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.".
The above path "I:...." is mapped on the server that SQL Server is running on.
This package runs with NO problems in MS Visual Studio.
HI ALL
I have created a stored procedure for a routine task to be performed periodically in my application. Say, i want to execute my stored procedure at 12:00 AM daily.
How can I add my stored procedure to the SQL server agent jobs??
Any Idea..
Hi. I was wondering if anyone has ever had a problem where nothing seems to be wrong with the server, and SQL Server Agent is up and running, but jobs fail. We had a job run at midnight, and it was the last successful run. Every job failed after that, with an error stating "Unable to retrieve steps for job..." There doesn't seem to be any reason for the problem. The jobs were kicked off manually and they all ran.
The only other error messages we could find were in the Application Event Viewer on the server. But the first error happened days ago and said this: "The description for Event ID ( 0 ) in Source ( .NET Runtime ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Unable to open shim database version registry key - v2.0.50727.00000."
Since then, every few seconds this error occurred: "Windows cannot load extensible counter DLL MSSQLServerOLAPService, the first DWORD in data section is the Windows error code."
We turned off the performance monitor counters and that error stopped. But we still have no idea if that was the cause of the problem.
This isn't the first time we've had an issue with jobs failing because the steps couldn't be 'found', while SQL Server Agent was up and running.
Has anyone else had this problem?
Thanks!
Hi All,
I was working on some reports on SSRS. Now I cant view those reports coz I can not open report manager.
I noticed that SQLSERVER and SQL Server agent has stopped running in my local machince. But Other services are running properly (SSIS, SSRS, SSAS). When I go to SQL Configuration manager and try to run them, I get the following error massege.
" The request failled or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details. "
So now I can not connect database engine in my local machine through management studio. When I try to do that, I get the following error massage.
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)"
Also I can not access reportserver data base and reportservertemDB.
If I reinstall SQL Server again, what would happen? Would I still be able to use and view my old reports?
Please can anyone help me to get this worked again correctly?
Thanks
Okay, i've got an ETL package which works flawless, we've created a scheduled job for it which also worked.
This ETL accesses a flat file located on a server on a different location in the same domain.
Last week we start a migration to a new network, the location where the flat file is stored has already moved to the new domain but the SQL server agent is still on the old domain.
There is a trust between the 2 domains, the network user from the old domain has been added on the server in the new domain where the flatfile is located.
If i run the etl package manually it works flawless, now if i run the etl using the SQL server agent it won't run anymore.
I get the following error:
Executed as user: OIdDomaindwh. ...n 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 21:15:00 Error: 2007-10-02 21:15:02.10 Code: 0xC001401E Source: Rolmer_Product Connection manager "Flatfile Product" Description: The file name "\fs-cha-fs01dwhproduit.csv" specified in the connection was not valid.
Don't tell me its a problem related to the user that the SQL Server Agent is set to because its set to OldDomaindwh which is the same user i use to login on the server where i can manually run it without problems. The problem only occures when i run it using the SQL server agent which uses the same user to execute packages.
This is a very difficult problem i doubt anyone here will be able to crack this nut, but if they do i'll be very impressed because it would require a real smart network admin with SQL experiance to figure this one out...
Good luck
Hi, I was wondering if anybody would be able to help me and realise by looking round that is a reasonably common problem, but it€™s starting to drive me mad now!!
I€™ve got an SSIS package which takes data from an excel spreadsheet and using a stored procedure updates a table in a database, before moving the spreadsheet to another folder once it finishes. This works fine when in the Business Intelligence Design Studio, but when I try to set it up to run from the SQL Server Agent I get nothing but problems. I€™ve had a look around various forums and seen that many people have had this problem and I€™ve followed advice that other people have given, but try as I might nothing will work for me.
Currently I€™m trying to go down the package configurations route. I€™ve enabled the use of package configurations in the development studio and specified the configuration to pick up the destinations, usernames and passwords of everything that I have in the Connection Managers. I then go to the SQL agent and as a step tell it to execute the SSIS package using the package configuration xml file that it has created. Both the SSIS package and the package configuration file are saved and been asked to run from the sql server I will be using. I then go to run the package and it thinks about it for a minute or so before falling over. The history then says the below:
Message
Executed as user: UKWACALORsql2k5svc. ....00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:35:31 Progress: 2008-05-06 11:36:32.10 Source: Data Flow Task 1 Validating: 0% complete End Progress Error: 2008-05-06 11:36:32.15 Code: 0xC0202009 Source: WiReCAPSLoad1 Connection manager "DestinationConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E4D Description: "Login failed for user 'sa'.". End Error Error: 2008-05-06 11:36:32.15 Code: 0xC020801C Source: Data Flow Task 1 Destination - cstCAPSLoad1 [32] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DestinationConnectionOLEDB" failed with error code 0xC0202009. ... The package execution fa... The step failed.
The DestinationConnectionOLEDB is pointing at a database on the same server as where I have the SSIS package and configuration file stored. I€™ve gone into the xml file and noticed that the passwords aren€™t saved so I€™ve added the passwords manually into the file after everytime it says username=sa but this hasn€™t made a difference. I€™ve also made sure that the package is saved to dontsaveencrypted.
I€™ve gone through the following article:
http://support.microsoft.com/kb/918760
and tried to use things such as credentials but these haven€™t helped either.
I€™m really not sure why its giving me such hassle, I have the SSIS package on the sql server, I have its package configuration on the same server, I have the databases it wants to access on the same server, I€™m using the sa account wherever I can to make sure I have no access / rights issues, so I really have no idea why this won€™t work. All I can think of is that the sql2k5svc account that the sql agent job then runs under doesn€™t have authority to get to the database or the package configuration file, but I€™ve added that account to have full control on the database that it will accessing, but again no joy. How do I change it so that another account can be used to run this, one that I know has all the authority required to access everything it should?? And why would the login for sa be failing when it€™s the highest level account??
I€™ve read so many different articles on this problem and tried to follow so many different resolutions that I really don€™t know how any of this is meant to work anymore!!
Any help would be gratefully received!!
Thanks
Brad
Hi folks!!
I am new to installation of SQL Server 2005..I wanted to know while selecting Service Account Screen why Avoid running SQL Server Agent as the Local System account.????
T.I.A
Hi
I have setup a step in SQL Server Agent to run a SSIS package that I have created. However the step fails straight away and refers me to the history log, which doesnt seem to show what the problem is.
I've tried running the package manually through dtexec.exe and it runs through fine. Does anyone know what the problem could be?
Thanks
Hello,
I have created a package that runs without problem.
I run the package with the command dtexec /F "package_name.dtsx" > package_name.txt.
Then I run the same package from SQL Server Agent, everything is OK
Then, I tried to edit the command line to have the output file, but I got an error.
The command line is:
dtexec /F "package_name.dtsx" MAXCONCURRENT "-1" / CHECKPOINTING OFF /REPORTING E > package_name.txt.
(MAXCONCURRENT "-1" / CHECKPOINTING OFF /REPORTING E are created by default)
How can I do?
Thank
When I give job Id in filter of this query this will give job status of "Success" but actually my job is currently in executing stage. I want to get all jobs that are currently in executing status.
Use msdb
go
select distinct j.Name as "Job Name", --j.job_id,
case j.enabled
when 1 then 'Enable'
when 0 then 'Disable'
[Code] ....
My package is connecting to an external data provider using an OLEDB driver . The package runs fine in debug mode.When i tried to run the same from SQL server agent it failed  to aquire the connection. The OLEDB provider does not contain too much of information , ( connection string, initial catalog, blank user name and password).The same package executes successfully if i run using dtexec in BAT file.But if i use the dtexec in sql server job step as operating system command and try to run, the job will fail reporting " can not aquire the connection".
View 2 Replies View Related
HI I'm still in the middle of this 2000 to 2005 64 bit migration!! I have managed to create an oledb connection to my informix db. Within the data flow I wanted to create a simple data pump from my infdormix db to S2K5 db.
Now in the OLEDB source I have done a select froma table to which I can view. I also set the always use default code page to true.
On the error box I get
[OLE DB Source [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error 1 Validation error. Reason code: OLE DB Source [1]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. Cerptransfer.dtsx 0 0
Also when I try to execute it I get
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Reason code [OLE DB Source [1]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Live@jvert07_se.service" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Reason code [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
Error at Reason code [DTS.Pipeline]: One or more component failed validation.
Error at Reason code: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
Can anyone help as i'm dead in the water now.
many Thanks
robert
We have an Access97 database with 122 tables. I try to use import and export wizard to import the data from access into SQL 2005 database. I find an interesting problem. When select all tables, the wizard give following errors:
Pre-execute (Error)
Messages
Error 0xc0202009: {DBD1EAB5-7865-4B89-A7BB-DDC8507D8119}: An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(SQL Server Import and Export Wizard)
Error 0xc020801c: Data Flow Task: The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Source 64 - PlanClasses" (5206) failed the pre-execute phase and returned error code 0xC020801C.
(SQL Server Import and Export Wizard)
But if I divide importing as 2 steps:
1. import all tables before PlanClasses, it works.
2. import all tables after PlanClasses including PlanClasses, it works.
If I just import PlanClasses itself, it works, but I can not import all tables at once. Interesting thing is if I just unselect PlanClasses, it will have same error at the class right after PlanClasses. Is there size limitation when doing import at once?
I recently installed standalone version of SQL 2014 Standard on my work computer. I used Access before but I want to use a SQL server instead.
We have a shared drive that a file gets deposited every day at midnight. I want to be able to get this file and import it to the server (its basically a list of names).
Here what I have done so far:
I created the database
Created the file and successfully imported data into it using the Import Data feature.
I saved the SSIS package
Scheduled an Agent Job for this package to run at certain time,daily
At first the jobs would fail with a Access is Denied. I added a user under Credentials with my network account ( have admin rights on the work computer).Also added a Proxy for the Credential user I made.
Jobs fail with a “Cannot open data file” error. I tried changing things here and there, but I can’t get it to work.
Hello
I'm trying to run a task that executes a script file (cmd). When i run it with in bids with my own users (domain admin) it works. When i start a cmd prompt and try to run the cmd file directly from the network location where it is it works (with my own rights and with the sql server agent user).
Now when i try to run in from smss > agent jobs > job and run job it never completes. Im not getting any error message either it just keeps on running on the step ??? It seems like a rights issue, but the account running the sql server agent is able to execute the cmd file directly from the command prompt.
There are no errors in any error logs anywhere and no error is displayed...
Ps. Im running the job step as a integration service pacgake.
When I attempt to import a table from another SQL 2005 server to mine, I recieve the following error:
- Pre-execute (Error)
MessagesError 0xc0202009: Data Flow Task: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
(SQL Server Import and Export Wizard)
Error 0xc0202025: Data Flow Task: Cannot create an OLE DB accessor. Verify that the column metadata is valid.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task: component "Destination - vwQualitySurvey" (226) failed the pre-execute phase and returned error code 0xC0202025.
(SQL Server Import and Export Wizard)
Is there anything that I can do to try and rectify this?
Hi,
I have developed a .dtsx package than runs normally from my computer. When I import it on the server and assign it to a job it always fails.
I tried also to run it directly from the server (remote desktop) and also faild. I exported the dtsx file on server and refresh the db connections and after that workd fine from the server.
Another work-around was to use windows authentication. Then runs normally from the server.
It seems that connection password is lost when importing the report on server. (The import is done in MSDB not in the filesystem)
But I can not design all the jobs on the server (work-around A) or use windows authentication (work-around B)
What is the problem and what can I do?
I have also played around with "save sensitive information" but with no results.
Thanks
I have an SSIS project that is deployed to a sql server.
The setup of the project is a parent dtsx package, and many child packages.
The parent executes each of the chid packages.
If I run the parent from BIDS, calling the children that are on the SQL Server, it works fine.
If I execute it from SQL Management Console running on my laptop, connected to the SQL Server, It works.
If I remote into the SQL Server and run it from SQL Agent or SQL Management Console, the job fails with the error:
Error 0xC0202009 while preparing to load the package. SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
for each of the children.
This has quite suddenly stopped working, and I cannot figure out why it will work being executed from my laptop, but not on the server.
Any ideas?
Thanks
BobP
I have developed a simple SSIS Package that will export data from an AS400 iSeries server to a flat file. When I try to debug the package I receive this error. I have tried to change the security level of the package to EncryptAllWithPassword and specified a password. For some reason the password for the connection to the AS400 is not being retained. when I enter the password the following error disappears when I try to debug the package the error returns.
Does anyone know how to correct this? Thanks in advance for your help.
Things to also know:
I am using a Native OLE DBIBM AS400 OLE DB Provider w/user name and password (Allow saving password checked) Test Connection succeeded.
I am using a OLE DB Source to extract the data with Data Access Mode of Table or View. When I try to select a table I am prompted from the AS400 to enter password. Then I can see the tables.
I can select the columns I need and click OK to save.
Error 1 Validation error. Data Flow Task: OLE DB Source [39]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SERVERNAME.USERNAME" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. SSIAS400DataExport.dtsx 0 0
Hello,
I have a Data Flow Task within an SSIS package where data is pulled from a Fixed Width flat file, goes through a conditional split, and sends data either to a SQL Server 2000 table, or to another fixed width flat file.
The first condition in the conditional split checks for the following; [Column 44] + [Column 45] != "D1" . If this is true, then those rows go to a SQL Server 2000 table destination. If false, then the rows go to another flat file.
The SQL Server 2000 table has a unique nonclustered index with ignore_dup_key. From what I can tell, it looks like the step fails when a duplicate record is encountered. However, it appears that the unique records still go into the table.
When I check the 'Progress' tab of the package, the following steps seem to be suspect;
[Populate Staging [786]] Information: The final commit for the data insertion has started.
[Populate Staging [786]] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "Duplicate key was ignored.".
[Populate Staging [786]] Information: The final commit for the data insertion has ended.
[DTS.Pipeline] Error: The ProcessInput method on component "Populate Staging" (786) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[DTS.Pipeline] Information: Post Execute phase is beginning.
..and..
Task 2 Isolate Suspect Records and Insert Known Good Records failed
In one case, the source flat file had 74,101 rows. Each row tested true in the conditional split, and all but one row made it into the SQL Server table. The step failed, and the 'Progess' section containted the entries mentioned above.
The Connection Manager for the SQL Server table destination uses the Native OLE DBMicrosoft OLE DB Provider for SQL Server.
Is the 'error' that occurs when a duplicate row is encountered causing the Data Flow task to fail, or could it be something else?
Thank you for your help. Please let me know if you need more information.
CSDunn
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
View 9 Replies View RelatedI've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
View 73 Replies View Related