2 Connections To The Same Databse Is Not Allowed?
Dec 1, 2006
I am using the SQLEXPRESS database, and connect from to locations:
Windows Service
ASP.NET web application.
whenever I start the windows service I get the error: Cannot open user default database. Login failed.
so I am going to visual studio and close the connection. then I close the web browser, and the windows service succeed connect to database.
but then, after windows service is connected, I open the web browser application and fails to login because the login system using the same database of windows service, and since the connection is being used by windows service, login is impossible.
Do you know how I can allow 2 connections at the same time for the same database?
what are the risks to do that? and how do I handle this risks.
thanks alot
View 3 Replies
ADVERTISEMENT
Mar 17, 2008
I have been reading through the article pointed to by the link below on msdn and its documented that one functional limitation of user instances is "Only local connections are allowed." I didn't understand the technical details(meaning) of that limitation and hopefully some one might explain it to me so that i can understand it better.
View 6 Replies
View Related
Oct 11, 2007
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies
View Related
Jun 17, 2004
Hi, I was trying to run an insert statement which has subquery, But it is returning the error like this..
Subqueries are not allowed in this context. Only scalar expressions are allowed.
--------------
Is there a way to reparse the insert statement without have to assign the subquery to a temp value and insert it?
thanks..
Here is my SQL..
insert into admincriteria values (nextID,(select id from nodetable where description like 'Example - Quality Analytics'),8071,2,'Failures by Customer',2,0,0)
View 14 Replies
View Related
May 17, 2005
Hi there,
Here we have got a
asp.net application that was developed when database was
sitting on SQL server 6.5. Now client has moved all of their databases
to SQL server 2000. When the database was on 6.5 the previous
development team has used oledb connections all over. As the databases
have been moved to SQL server 2000 now i am in process of changing the
database connection part. As part of the process i have a login
authorization code.
Private Function Authenticate(ByVal username As String, ByVal password As String, ByRef results As NorisSetupLib.AuthorizationResult) As Boolean
Dim conn As IDbConnection = GetConnection()
Try
Dim cmd As IDbCommand = conn.CreateCommand()
Dim sql As String = "EDSConfirmUpdate" '"EDSConfirmUpdate""PswdConfirmation"
'Dim cmd As SqlCommand = New SqlCommand("sql", conn)
cmd.CommandText = sql
cmd.CommandType = CommandType.StoredProcedure
NorisHelpers.DBHelpers.AddParam(cmd, "@logon", username)
NorisHelpers.DBHelpers.AddParam(cmd, "@password", password)
conn.Open()
'Get string for return values
Dim ReturnValue As String = cmd.ExecuteScalar.ToString
'Split string into array
Dim Values() As String = ReturnValue.Split(";~".ToCharArray)
'If the return code is CONTINUE, all is well. Otherwise, collect the
'reason why the result failed and let the user know
If Values(0) = "CONTINUE" Then
Return True
Else
results.Result = Values(0)
'Make sure there is a message being returned
If Values.Length > 1 Then
results.Message = Values(2)
End If
Return False
End If
Catch ex As Exception
Throw ex
Finally
If (Not conn Is Nothing AndAlso conn.State = ConnectionState.Open) Then
conn.Close()
End If
End Try
End Function
''' -----------------------------------------------------------------------------
''' <summary>
''' Getting the Connection from the config file
''' </summary>
''' <returns>A connection object</returns>
''' <remarks>
''' This is the same for all of the data classes.
''' Reads a specific
connection string from the web.config file for the service, creates a
connection object and returns it as an IDbConnection.
''' </remarks>
''' -----------------------------------------------------------------------------
Private Function GetConnection() As IDbConnection
'Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection
Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection
conn.ConnectionString = NorisHelpers.DBHelpers.GetConnectionString(NorisHelpers.DBHelpers.COMMON)
Return conn
End Function
in the above GetConnection() method i
have commented out the .net dataprovider for oledb and changed it to
.net dataprovider for SQLconnection. this function works fine. But in
the authenticate method above at the line
Dim ReturnValue As String = cmd.ExecuteScalar.ToString
for some reason its throwing the below error.
Run-time exception thrown : System.Data.SqlClient.SqlException - @password is not a parameter for procedure EDSConfirmUpdate.
If i comment out the
Dim conn As IDbConnection = New System.Data.SqlClient.SqlConnection
and uncomment the .net oledb provider,
Dim conn As IDbConnection = New System.Data.OleDb.OleDbConnection
then it works fine.
I also have changed the webconfig file as below.
<!--<add
key="Common" value='User ID=**secret**;pwd=**secret**;Data
Source="ESMALLDB2K";Initial Catalog=cj_common;Auto
Translate=True;Persist Security Info=False;Provider="SQLOLEDB.1";'
/>-->
<add key="Common" value='User ID=**secret**;pwd=**secret**;Data Source="ESMALLDB2K";Initial Catalog=cj_common;' />
Please help. Thanks in advance.
View 4 Replies
View Related
Aug 31, 2006
i'm making a web page for a clinic.it needs to be able to search for patients by first name, surname, date of birth and patient number.i'm using visual web developer and i have my database, my data source and GridView grid.i want 4 text boxes for my first name, surname etc. when u click enter on any of them i want to retrieve all their data and display it in the gridview.at the moment i have one text box on the web page and through the "Configure data source" option on the grid view i can retrieve the specified data but for only this one item, e.g. SELECT * FROM [Patients] WHERE ([DOB] = @DOB). if i add another text box to my web page, and don't do anything to it, the query wont run. if i add and "AND" statement to the query, e.g. SELECT * FROM [Patients] WHERE (([DOB] = @DOB) AND ([FirstName] = @FirstName)), again it won'r run or return and data. any ideas on what i can do or where i'm going wrong. thanks
View 1 Replies
View Related
May 18, 2000
Does anyone know how I can receive some type of notification (an alert) that fires when a new database is created (or an old one deleted) on a server?
Thanks.
View 1 Replies
View Related
Sep 10, 2007
Dear All I've made transactional replication between two SQL 2005 servers.Everything looks fine, synchronization working fine, no errors, however size of replicated database file = 97 Mb,on Publications server the database file size = 184 Mb. What is wrong :S ? Best RegardsPiotr
View 5 Replies
View Related
Apr 6, 2008
Hi,
I had downloded MS SQL express from Microsoft. But i did not find any place from where i can create databse, table etc..
please help me regarding this.
thanks
Sabbir
View 3 Replies
View Related
Jun 29, 2006
hi, im totally new to this sql thing.
i have a set of classes here and my objective is to show that they can connect to the database. how am i supposed to do this?
can i post my classes here? theres a lot..
View 8 Replies
View Related
Apr 7, 2007
Hi, my database i am working on is full of crab, who do I clear all the tables info?
View 3 Replies
View Related
Aug 2, 2007
How to create a database in MS SQLserver 2005 express edition.
Pleae help me to get started.I have learned some SQL commands.
But i want to execute those in SQLserver 2005.But i don't know the procedure for creating a database.please help me on this.
View 5 Replies
View Related
Sep 21, 2007
Im creating a sample database for purposes of keeping track of employee's jobs + billing codes for that job. currently they just use an excel spreadsheet to keep track of billing.
Question 1:
What would be the easiest way for the manager to enter billing codes? Billing codes are numbers like 956, 958, 805 and they co-relate to prices for each billing code.
1. I want the manager to enter the billing code and have the sql database find out how much that code is and add them up daily. This would prevent the manager from having to input prices and billing codes, and extra step.
Any links on the above topic would be helpful. I'm not looking for anyone to spoon feed me code just point me in the right direction. Im relatively new to sql having only a class of sql @ ITT.
Heres the way I have the db tables laid out currently.
employee table
employee_id
technumber
fname
lname
address
workphone
homephone
trucknumber
officelocation
employeejobs table
employee_id
jobs_id
jobs table
jobs_id
codes
date
timeframe
city
hours table
hours_id
employee_id
hoursworked
month
Any info would be much appreciated, Im going to go find a sql book now ;).
View 1 Replies
View Related
Jul 20, 2005
hi everyoneCould someone please help me in following:One of my database in SQL 2000 going Offline automatically. When ibring it back Online its Ok for 20/30 minutes and then again appear asOffline. I had similar problem when one of the database keep going to'Single user' automatically.Any idea what happening.Thank you*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
Jul 20, 2005
Hi, there is an existing application running on a SQL Server database.Now I have to built a different app, which will have two common tableswith the existing database (Customers, sales)Is there any benefit (performance mainly) creating the tables for thenew app in a new database? (On the same machine and the same instance)*** Sent via Devdex http://www.devdex.com ***Don't just participate in USENET...get rewarded for it!
View 3 Replies
View Related
Jun 21, 2007
I went and detached a database. It is no longer showing in EM. I try to attach the database and I do not have any MDF files anywhere on my PC. Where did my database go when I detached it? How can I get it back. Please help.
Thank you
View 6 Replies
View Related
May 7, 2007
Hi,
I am doing one E-commerce Application , throgh C#. & sql server express editon. Both my Local & Web Hosting servers are in sql server express 2005. I designed Databse Throghly, to my local server. Now I want to Transfer tables to my web server. I have already Sql server mangement studio Express. I can not do.. I spent, more than 5 yrs time..
Please help asasp..
Thanks
Partha
View 1 Replies
View Related
Oct 4, 2006
I have a system running on SQL Sever and i am trying to create a second file on a diffrent computer so that I can teach people how to use sql sever (express) without risking losing any data that I have on my proper database.
I have created a backup of my database which is in a dmp file and I would like to import this into SQL Server Management Studio Express so that I can make changes to the databse without affecting the one that is running on my website.
Cheers for any help
View 10 Replies
View Related
Nov 6, 2006
I would like to run some queries on two tables that reside in two different database (located on the same server). The databases are both MS SQL 2000.How do I create a database link (or a table link??) so that I can create the queries from the Enterprise Manager or the Query Analyzer? Thanks a lot, Christian
View 1 Replies
View Related
Mar 2, 2007
Hi,
I have a SQL Server 2005 Express database dbase.mdf which I cannot access. It works fine in VWD and the development server using the following connection string: String connectionString = "Data Source=.\SQLEXPRESS;AttachDbFilename=|DataDirectory|\dbase.mdf;Integrated Security=True;User Instance=True"But when the site is not on the development server but on IIS, I get a SqlException saying "User does not have permission to perform this action." when I execute the connection.Open() command. I find it extremely frustrating that something which works in the development server fails on the real server. Can anyone help me with this? Do I have to change my connection string, or perhaps set some permissions...I have already given the IUSR_MACHINENAME account and the ASPNET account full access to dbase.mdf. Surely this must be an issue that lots of people deal with... How do other people manage to log to access databases? Any help would be much appreciated. Thanks,P1000
View 4 Replies
View Related
Dec 27, 2007
can any body tell me how to update the database thru dataadpater ???????
and another imp thing.........
if there r 2000 rows in database ..........and updation of 2 rows takes place
i want that whole of the database should not be updated ......only those two rows are updated
Can any one help me please??????
thanks in advance
View 1 Replies
View Related
Jan 5, 2008
hello all
the problem with me,im for the first time using SQL Server and ASP,so i have little knowledge baout these two progs.i want to know how pages in ASP are connected to databse.
second, i installed SQL Server2005 along with asp from the same CD(option of instalation of both was available). There is also a way use SQL Server within the ASP Environment(addnew itmes>sqldatabase>).
Question: if i create a databse through above method. then how i will use it in asp.net.Although i can do it by draging "SQL Data sourcr" from "Data" category in the "toolbox"however, i want to manually connect the application to Db.Something like this
Page_load(0
{
//db connection code goes here.//sqlcommand goes here.
con.open()
}
i want some controls like txtboxes and label to manualy connect to databse tables.
plz someone forward the code,
View 1 Replies
View Related
Jun 9, 2008
Hi Friends,I have one table in the databse,i.e userTable with one field userNameIn my form I have one Label ,textbox for entering the userName and One button for submit,So I am entering the data into the table(userTable) after clicking on the submit buttonBut my problem is before entering the data into the table I want to find wheather the given data exits or notif its not exists the data has to insert into the table otherwise its has to display the message"the user is already existed"for this I wrote the code like this in C# public Boolean isUserExists() { SqlCommand cmduserName = new SqlCommand("select count(*) from userTable where userName= " + txtuserName.Text + ")", conn); SqlDataReader rdr = null; rdr = cmduserName.ExecuteReader(); conn.Open(); int count = 0; while (rdr.NextResult()) { count = rdr.GetInt32(1); } conn.Close(); if (count == 0) { return false; } else { return true; } protected void Button1_Click(object sender, EventArgs e) { if(isUserExists()) { Response.Write("Opps ! User already Exists"); } SqlCommand adapInsert = new SqlCommand("insert into userName values('" + txtuserName.Text + "')",conn); conn.Open(); adapInsert.ExecuteNonQuery(); conn.Close(); Response.Write("data inserted"); } is it write or not because I am not getting the output .please tell me any one where I have to change the code ThanksGeeta
View 3 Replies
View Related
Feb 23, 2004
Hey guys,
I have to copy a databse from one server to another(both sql servers). Now the copy databse wizard wont work as the database is active( ie its open all the time), is there any other way to copy it to a different server while its in active session.
AM
View 2 Replies
View Related
Nov 4, 2005
Hello,,
I backed up my database and it created a BAK file. Now I move this file to other server and trying to restore from it. It is giving me error: Device activation error. Do I have to create database before restoring. I do not have this database available in other server and I need to copy database with all constrains and tables.
Thanks,
View 2 Replies
View Related
May 31, 2000
when i was trying to create a database like
CREATE DATABASE @dbname
i am getting the message
Incorrect syntax near '@dbname'.
is it possible to create a database like this
if yes how
Thanks alot on advance.
View 3 Replies
View Related
Jul 6, 2004
Hello,
I am trying to remove files from my MS SQL database but I cannot find them. I do not know anything about databases. Someone had created a program for me through which I could upload files to MS SQL database but I need to delete some of the old files to free up some database space. I can access MS SQL database through the control panel of my host but I cannot seem to find the files I have been uploading.
If someone could give me step-by-step information on how to view the files within MS SQL database and how to remove them, it would be greatly appreciated.
Thank you.
View 1 Replies
View Related
Nov 8, 2000
Hi
I need to ask a realy dumb question.
I have a database whereby both the devices for the tran log & the database
are full.
Does SQL 6.5 grab all the space so the devices appear to be full, or does full mean full ( and no further transactions are possible? )
Any help would be great
Thanks.
View 2 Replies
View Related
Mar 17, 2004
I am trying to detatch a database that is set up as a publisher. I have desabled the replication tasks on both the publisher and subscriber db and am still unable to detach the db. Any ideas?
The image below is an example of the message I receive. I have tried after hours so at that time the users are 0.
Thanks.
View 3 Replies
View Related
Mar 17, 2004
I am trying to detatch a database that is set up as a publisher. I have desabled the replication tasks on both the publisher and subscriber db and am still unable to detach the db. Any ideas?
The image below is an example of the message I receive. I have tried after hours so at that time the users are 0.
Thanks.
View 2 Replies
View Related
May 9, 2008
hi
i want read table name in database in sql while loop statement
View 7 Replies
View Related
May 22, 2008
Hi all,
I am planning to restore of a SQL 2000 Database on another server
can you folks tip me in the right direction with the SQL script to be used.
any help much appreciated
Much thanks in advance
Josephine
View 5 Replies
View Related
Jul 23, 2005
I have a problem with my TEMPDB Database.It gets extra size throughimporting data into one of my databases in same server.How can I shrink my TempDB Databse?Thanks
View 1 Replies
View Related
