2 Databases On 2 Servers, 1 Query?
Jan 25, 2008
Hello,
We have adedicated MS-SQL Server for our CRM database and we have another MS-SQL database server for in house applications, written in c#.Net 2.0. To avoid duplicating information already in our CRM database, it would be nice if we could build a query that combined columns from both data sources.Example
Code Snippet
CRM database on Server1
Table Accounts
Columns
AccountID UniqueIdentifier Primary Key
Name NvarChar(50)
Application Database on Server2
Table Transaction
Columns
TransactionID UniqueIdentifier Primary Key
AccountID UniqueIdentifier
Amount Money
Would it be possible to create a T-SQL statement that will select
Code Snippet
Select
Server1.CRM.Accounts.Name,
Server2.Application.Transaction.TransactionID,
Server2.Application.Transaction.AccountID,
Server2.Application.Transaction.Amount
From Server1.CRM.Accounts INNER JOIN Server2.Application.Transaction
ON (Server1.CRM.Accounts.AccountID = Server2.CRM.Transaction.AccountID)
I appreciate there will need to be 2 connections and therefore some credential information would need to be passed too.
Is anything like this possible? I do not wish to copy the Name field from Server1.CRM.Accounts to Server2..Application.Transaction as this is duplication and any change to the value of Server1.CRM.Accounts.Name would not be reflected in the results.
Many thanks for any information provided.
View 3 Replies
ADVERTISEMENT
Apr 10, 2008
Hi,
Im trying to access data from a database on another server in a SQL 2005 query.
use Bury2k29.ServiceDeskForms
select .......
but I get the message
could not locate entry in sysdatabases for database 'Burky2k29'. No entry found with that name. Make sure that the name is entered correctly.
Bury2k29 is the name of the server, and ServiceDeskForms is the database I want to access.
When I open a blank query and enter only the code to access that database it runs fine.
Any ideas?
View 4 Replies
View Related
Sep 4, 2007
Hi, If you have 2 databases with the exact same table columns, and in the first database in a table column the indentidy seed starts at 1 and finishes at 32,000 can you attatch a second database so that the indentity starts at 32,001and carries on. What happens if you create a site and run out of disk space and need to attach another database which is located on another server??? I am really confused about this.Hope someone can give some links to some articles about this as I can't find any information about it.How can this be done? Thanks
View 1 Replies
View Related
May 12, 2006
Hello,This is my first post, and i am looking for help about Databases in remote servers.This is my problem:1) I have a free account in "HostBasket", with 50 mb of space, and 10 mb of SQL Server... with ASP.NET 2 support --> http://www.hostbasket.com/dotnet2.shtml?LinkFrom=100602) They gave me this info for the database:Your SQL Server: sql15.hostbasket.comYour database name: myDatabaseNameYour login for the database: myLoginYour password for the database: myPasswordConnection string for ASP.NET (using ADO.NET with System.Data.SqlClient namespace):Persist Security Info=True;User ID=myLogin;Password=myPassword;Initial Catalog=MyDatabaseName;Data Source=sql15.hostbasket.com 3) Actually, i don't know what to do with that info... I mean, i have read so much info, and all people saying "their way" to do things... oh, I am so confused...4) I read in a website, this: "the database can be uploaded as a FILE saved in the App_Data folder, under the .mdf extension"I read that from : http://dotnetjunkies.com/QuickStartv20/aspnet/doc/data/vwd.aspx5) In the url given above, there is a "step by step" example... i follow it, exactly (i start a asp.net website, i create the database and the table, i show the data with the grids, etc )6) All is OK until here, i mean, when i run the website with VWD, it shows me the info OK.7) But... ¿How can i do this works on the Remote Server i described in 1) and 2) ?I know how to upload my website, in fact i uploaded a very basic one, and all was OK, but when i work with databases starts my problem...So, i am almost sure, that i have an error in the "Conecction String"... connectionString="Data Source=.SQLExpress;AttachDbFilename=|DataDirectory|MiBaseDeDatos.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient" ¿How should it be, to work with my free remote server?or,if you have done the "easy way" of uploading the .MDF file in the server (but a server different of mine) please, tell me the "how to..." (and the server you used :p )--------------------Ok guys, i am a Chilean young (i dont speak english very well) and i tried to write my ideas in an easy way, so I REALLY HOPE you can help me.I am a New (very new) on this (vwd , .net , asp.net ) in fact, i am using this just 3 days ago...THANK YOU SO MUCH,Carlos,La Serena, Chile.
View 7 Replies
View Related
Feb 15, 2002
I need some advice on copying databases, stored procedures, views, logins ..etc from a SQL Serevr 7.0 server, to a new SQL Server 2000 server.
Is it better to backup the databases on one server and then restore them to the other. Or id it easier to use the Wizards to Import everything from new server, or to Export everything from the old server ?
Any advice would be appreciated. I need to ensure that I do not miss anything, in particular Stored Procedures in the old master database.
View 2 Replies
View Related
Mar 27, 2001
I'm fairly new to a DBA role, I've been tasked with documenting all the SQL servers/databases. Is there anywhere on the Web where I could find a standard list of what needs to be documented. Any help/advice would be appreciated.
View 1 Replies
View Related
Jan 11, 2000
I tried using Import/Export to transfer a database from one SQL Server box to another using NT authentication.
The database appeared to transfer OK, however the process crashed with an error suggesting that a SQL Server login was not present.
How are the SQL Server logins transferred ?
Richard
View 2 Replies
View Related
Aug 23, 2013
We are wanting to know how to connect 2 databases residing on 2SQL servers. The workstation has access to both databases. Join on Cols 1 and 2.
Server1, Database1, Table1, Column1 (Char)
Server2, Database2, Table2, Column2 (VarChar)
View 2 Replies
View Related
May 17, 2006
Hello,I wish to see if the tables from database A server A1 exist in databaseA on server B1.I setup a linked server from my first server (robertcamarda) to atarget (cognos-dev)This works from robertcamarda:select count(*) from [cognos-dev].ds_v6_source.dbo.stdmasand this works:select * from ds_v6_source.information_schema.tables order bytable_namebut this wont work:select * from [cognos-dev].ds_v6_source.information_schema.tables orderby table_nameError:Msg 117, Level 15, State 1, Line 1The object name 'cognos-dev.ds_v6_source.dbo.information_schema.tables'contains more than the maximum number of prefixes. The maximum is 3.I want to do something like:select * from ds_v6_source.information_schema.tableswhere table_name not in (select table_name from[cognos-dev].ds_v6_source.information_schema.tables order bytable_name)so I can see of the sql server (robertcamarda) has any missing tablesthat exist on the server (cognos-dev)TIARobSQL Server 2005 Enterprise
View 3 Replies
View Related
Feb 23, 2008
Code Snippet
SELECT ReciptItems.acc_TopicCode, ReciptItems.acc_DetailCode, ReciptItems.acc_CTopicCode,
SUM(ReciptItems.TotalInputPrice + ReciptItems.TotalOutputPrice), a.MoeenName_L1
FROM ReciptItems LEFT OUTER JOIN
Acc_mydbname.dbo.Categories AS a ON ReciptItems.acc_TopicCode = a.TopicCode
GROUP BY ReciptItems.acc_TopicCode, ReciptItems.acc_DetailCode, ReciptItems.acc_CTopicCode, a.MoeenName_L1
How Replace Acc_mydbname with (SELECT AccountDBName FROM Config)
(SELECT AccountDBName FROM Config) ='Acc_mydbname_2008.dbo.'
View 6 Replies
View Related
Apr 10, 2006
Hi,
I was wondering if the following is possible: I have 2 SQL Express servers on different machines. One holds the production and one the development database. On a request basis I'd like mirror all the data of the production database to the development database. Right now I have to stop the sql engine, zip the mdf, send it over, attach it to database, etc. and that's quite cumbersome. So, is there an easier way to do this? If not with SQL Express, is it possible with the full version?
Thanks,
Tom
View 1 Replies
View Related
May 29, 2007
Dear all
I have tow server on the same intranet. One server has a sql server 2000 database and the other one has SQL server 2005 databse.
The sql 2000 database has a table called employee. When ever a new employee is inserted in the database i would like the same values to be sent to the sql 2005 database. But this cant be done on the application level. It has to be done in the database. The application level can not be changed.
I was thinking a trigger but how to achieve the writing from one database to another. If they were on the same server then it would be easier but because they are on different servers i dont know how to do it.
Has anyone had similar issue before?
Any help is apreciated.
Sincerely
Dan
View 2 Replies
View Related
Apr 25, 2008
I'm working with the SQL Report Viewer in VS2k5. In the Data tab, where the Dataset drop down list is, I click the "..." to edit the dataset. I am currently using the following for the datasource...
Data Source=ServerName;Initial Catalog=DatabaseName
In one database, I store an employee ID number. I need to access a different database on a different server to reference the employee ID and pull the employee's name. Is there a way to specify two different databases on two different servers in the connection string above?
Thanks!
View 1 Replies
View Related
Oct 27, 1999
Hi there,
I was just wondering is it possible to select data from two different databases on two different servers?
ie Select * from
Server1.databasename..table, Server2.databasename..table
If anyone has any suggestions they would be appreciated,
Thanks,
Fin
View 2 Replies
View Related
Aug 15, 2005
Hello, I need a tool for management ms sql: compare list of databases on 2 servers (not structure and/or data of 2 databases), copy from one server to second new databases, delete from the second server ... Not to propose Copy Wizard.
Thanks
View 4 Replies
View Related
Dec 8, 2004
I know the SQL syntax to join two tables in different databases on the ame server, but does anyone know if a SQL statement will allow you to join tables from different databases on different servers?
View 8 Replies
View Related
Nov 14, 2007
Is it possible to get an aggregate list of databases from multiple servers, without using SMO?
All target servers are running SQL Server 2005.
Ben Aminnia
View 2 Replies
View Related
Jan 17, 2006
Hi All,
I need to run an Insert query which pulls data from a table located on server A database AA Table AAA conditional on (or JOINED with) Table BBB in database BB sever B. In SQL 2000 I would simply do the following:
From Server A:
sp_addlinkedserver B
INSERT dbo.ResultsTable
SELECT SourceTable.* FROM B.BB.dbo.BBB SourceTable
INNER JOIN A.AA.dbo.AAA ConditionTable ON SourceTable.RecID = ConditionTable.RecID
sp_dropserver B
What do I need to do to perform the same operation in SSIS world?
Thank you !
View 1 Replies
View Related
Jun 20, 2007
Hello:
I'm working with two sql servers instances, ServerA and ServerB, which run under two different service accounts on different machines. They both have a database, DatabaseA, that has some encrypted fields.
If I take a backup of DatabaseA on ServerA and restore it on ServerB, I need to re-encrypt the Database Master Key (DMK) with the Service Master Key (SMK) as follows:
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'pwd used to encrypt DMK'
ALTER MASTER KEY ADD ENCRYPTION BY SERVICE MASTER KEY
However, if I again take a backup on ServerB and then restore it on ServerA, I can use the DMK on ServerA without re-encrypting it with the SMK.
Shouldn't I have to re-encrypt the DMK with the SMK everytime I restore from a backup that was generated from a different server?
Thanks,
Cyndi
View 1 Replies
View Related
Jul 3, 2006
I have run into problems trying to use backed-up encrypted databases. I have an ASP.Net/SqlServer 2005 website for which I have production, test, and development environments, each on its own box. I have set up encryption using Master Keys, Certificates, and Symmetric Keys using the following commands:
CREATE MASTER KEY ENCRYPTION BY PASSWORD = 'password'
CREATE CERTIFICATE CERTIFICATE_NAME WITH SUBJECT = 'My Website'
CREATE SYMMETRIC KEY KEY_NAME WITH ALGORITHM = TRIPLE_DES ENCRYPTION BY CERTIFICATE CERTIFICATE_NAME.
All databases have the same certificate and symmetric key names. The Production database has a different password than the development and test databases.
I am running into problems when I back up the development database and try to move it to the test environment. When I do the move, and then try to access the encrypted data, I get an error "An error occurred during decryption", even though they are the "same" database (I originally detached and copied the development database to the test box when I set up the test environment) with the same password.
I then try the following commands, which I used when I brought the development database over to the test box the first time:
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'password'
ALTER MASTER KEY REGENERATE WITH ENCRYPTION BY PASSWORD = 'password'
This caused the following error:
"An error occurred while decrypting certificate 'CERTIFICATE_NAME' that was encrypted by the old master key. The FORCE option can be used to ignore this error and continue the operation, but data that cannot be decrypted by the old master key will become unavailable."
So, how do you set up encrypted databases so that you can backup from one database server and restore on another? This problem will be very important when I set up a backup production database server.
View 12 Replies
View Related
Aug 12, 2015
I need to compare columns in tables on 1 database on one server versus the same on a 2nd server.
I'm looking for added columns in dbase 1.
Is there a system T-SQL script that can be used for this?
View 4 Replies
View Related
Oct 31, 2007
i am having 2 sql servers one is web sql server server and other server is my local sql server. i am making web application through which i want to connect both sql servers at a time and by selecting data from web server i want to insert it into my local sql server both having same database on which i want to work , i want to know how it can be done
my idea as follows in web.config i specify 2 connection string and by selecting data from websql server database table i going to store it in dataset and then i return dataset to another function which connects to local sqlserver database.but database records are much large. can any body guide me .
i am going to place my web application on local server (C# asp.net 2.0) .
thank you,
i tried this code
c# file
public partial class _Default : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
}
protected void Button1_Click(object sender, EventArgs e)
{
Uupdatedata();
}
public void Uupdatedata()
{
string constr1=ConfigurationSettings.AppSettings["abccon1"];
string constr2 = ConfigurationSettings.AppSettings["abccon2"];
System.Data.SqlClient.SqlConnection dbcon1 = new System.Data.SqlClient.SqlConnection(constr1);
dbcon1.Open();
System.Data.SqlClient.SqlConnection dbcon2 = new System.Data.SqlClient.SqlConnection(constr2);
dbcon2.Open();
SqlDataReader dr;
SqlCommand cmd = new SqlCommand("select * from Unit_Master",dbcon1);
dr = cmd.ExecuteReader();
while (dr.Read())
{
string Sql = "insert into Table1(Unit_Id,Unit_Desc) values(" + dr.GetInt32(0).ToString() + "," + dr.GetString(1) + ")";
SqlCommand cmd1=new SqlCommand (Sql,dbcon2);
//cmd1.EndExecuteNonQuery ();
}
//dr.Close();
//dbcon2.Close();
}
web.config<configuration>
<appSettings>
<add key="abccon1" value="Data Source=comp01;Initial Catalog=abc;User Id=sa ; Password=sa"/>
<add key="abccon2" value="Data Source=comp01;Initial Catalog=abctest;User Id=sa ; Password=sa"/>
</appSettings>
<connectionStrings/>
this 2 databases are from single my loacl server
it wont work it gives exception
please healp me.
View 4 Replies
View Related
Jun 13, 2000
I have used the following script to add the size of chosen tables in all the databases on a given server. What I need to do is to create a GRAND total. Can someone give me a hint?
exec sp_msforeachdb
@Command1 = "print'?'",
@Command2 = "use ?
SELECT CAST (o.name as char(20)) as 'Table', SUM(c.length) 'Record size',
MAX (i.rows) '#of rows',
CONVERT (decimal (10, 4), SUM (c.length * i.rows)/(1024.00 * 1024.00)) 'Approx. size (MB)'
FROM sysobjects o, syscolumns c, sysindexes i
WHERE o.id = c.id
AND o.id = i.id
AND (i.indid = 1 or i.indid = 0)
AND o.type = 'U'
And o.name in ('Table1','Table2','Table3')
GROUP BY o.name
COMPUTE SUM (CONVERT (decimal (10,4), SUM (c.length * i.rows)/(1024.00 * 1024.00)))"
Thank you
View 1 Replies
View Related
Nov 20, 2007
Good morning all,
I need to create a new table on a SQL Server 2005 Database, but the data needed for the table is kept in different databases on different servers.
Half the data is on the SQL 2005 database, so that shouldn't be too much of a problem, but the other half is on a SQL Express database on a different server, is it possible to write a T-SQL query to retrieve this data on the other server?
Normally I use a create table + insert into kind of query to create custom tables but I don't know how to connect to the SQL Express server/database using T-SQL (if it's possible at all?) to do this.
Any tips, hints, ideas very welcome. Please use small words and short sentences.
Thanks,
Paul
View 3 Replies
View Related
Apr 28, 2008
Hi there
I have a concern about restore whole SQL server environment.
1st server:
x86 SQL Server 2005 EE SP2 + hotfix 3159 is installed on Windows 2003 SP1 R2. SQL Server is running under Local System Account. Server is not part of AD.
2nd server
Win XP SP2, x86 SQL Server 2005 DE SP2 + hotfix 3159. SQL Server is running under Local Admin Account. Server is part of AD. Server has Credentials and linked servers
I'm trying to move all databases from server 2 to server 1
For this I am doing:
1) Create backup SMK
2) Detach all user databases
3) Backup all system databases
4) Copy all this stuff to server 1
5) Run Server 1 in single-mode (-m)
6) Restore master database
7) Try to restore backup SMK that was done on step 1 and get this error message:
Msg 15329, Level 16, State 11, Line 2
The current master key cannot be decrypted. If this is a database master key, you should attempt to open it in the session before performing this operation. The FORCE option can be used to ignore this error and continue the operation but the data encrypted by the old master key will be lost.
My understanding is that credential secrets, linked server login passwords are lost and should be recreated. DbMK can be restored using passwords.
As far as I know this can be avoided if the same domain account is using for both servers. But the question still this - if I have stand alone server, using local system account for the SQL Server service and have encrypted objects - I cannot restore SQL Server on another box (say in case disaster lost original one) without loosing credentials and linked servers even if I have all backups including backup of SMK.
Sounds gloomily for me. Any idea what I missed?
PS This links
http://blogs.msdn.com/lcris/archive/2005/09/23/473464.aspx
http://blogs.msdn.com/lcris/archive/2005/07/08/437048.aspx
http://blogs.msdn.com/lcris/archive/2005/09/30/475822.aspx
http://blogs.msdn.com/lcris/archive/2006/04/10/572678.aspx
and all relative topics in BOL were studied very carefully
Regards,
Gennadi
View 4 Replies
View Related
Feb 23, 2007
Greetings.
I have a setup/deployment question regarding SQL Server Encryption.
Internal database encrypts data in 3 different tables. This could execute on any one of 6 different servers.
The tables with encrypted data are replicated to another database on different servers (3)
How should the keys/certificates be created so that the data in the replicated database can be decrypted?
In my test scenario so far, I have been unable to have the second database decrypt the data that was encrypted on the first database (currently on the same server).
-- Create Database Master Key
CREATE MASTER KEY ENCRYPTION BY
PASSWORD = 'p@ssw0rd'
GO
-- Create Certificate
CREATE CERTIFICATE MyCertificate
WITH SUBJECT = 'My Data Encryption Certificate',
EXPIRY_DATE = '10/31/2010';
GO
CREATE SYMMETRIC KEY MyKey
WITH
ALGORITHM = AES_256,
IDENTITY_VALUE = 'My Symmetric Key',
KEY_SOURCE = 'Unique phrase that will be used to secure the key'
ENCRYPTION BY CERTIFICATE MyCertificate;
GO
View 3 Replies
View Related
Aug 29, 2007
Hello everyone,
Here's my situation...
I'm running a web service which involves 51 seperate servers and databases.
There are fifty licensee servers (One for each US state) and one corporate server.
Each night I need to upload sales and membership data from the licensee's databases to the corporate database to compile reports.
The application platform I'm using is ASP.NET 2.0 and the the database is SQL2005 express.
I want this process to be run automatically, so I believe it's a scheduled windows service I need to setup up in .NET to make the data transfers.
If anyone has already set something up like this, or knows the steps to take? I would love to have your input.
Thanks in advance,
Robert
View 5 Replies
View Related
May 18, 2015
We are planning to move all of our System Center Databases that reside on front end servers to each system center application to a centrally located SQL 2012 server. We'd like to centralize everything and have our DBA care for the server. here is our setup:
SCOM has 1 monitoring and 1 Data warehouse server. SCCM has 1 server with all roles on it. DPM database is on the same server as Application. Same with SCVMM. I have 2 questions regarding this move:
1. Can I have all these databases running on 1 SQL instance?
2. Is there a best practice document that highlights steps and "gotchyas"
View 4 Replies
View Related
Aug 27, 2015
I am doing some administrative tasks and need to collect some principals information from multiple instances and user databases.
I have table "dbo.instances" with list of instances.
I have databases from "sys.databases".
How can I execute the query to get principals information from "sys.database_principals" on each remote instance and database. I know that can use cursor, but not sure how to do this with multiple servers and databases.
View 3 Replies
View Related
Sep 13, 2007
Hi,
I'm trying to create a database that takes specific information from a number of databases on different servers to make some reporting that we have much easier.
I'm pretty new to SQL so I'm not sure of the best way to proceed. I read an article that suggested I use the OPENROWSET command. The problem is, the version of SQL that came with one of the programmes we use is limited and will not allow you to turn on the allow "Ad Hoc distributed Queries" so the SLQ statement will not execute.
I'm confused why it won't let me to connect through ODBC as I've created a web page that selects data from this database with no problems!
Here is the SQL statement that I've written to make sure it is the correct one (on the msdn library page it said that this was the ODBC connection):
SELECT a.*
FROM OPENROWSET('MSDASQL','DRIVER=(SQL Server);SERVER=APPOLOACT7;UID=sa;PWD=***************',
'SELECT * FROM MDCTestAndDev.dbo.TBL_CONTACT') AS a
I've also created the ODBC connection using the tool on Administration Tools>Data Sources ODBC
Any help would be greatly appreciated (also any ways of selecting from one database and inserting it into another will be helpfull)
Thanks
View 8 Replies
View Related
Jan 25, 2005
I'm new to SQL and I'm trying to write a stored procdeure in my current database that queries a different database on a different server. What is the best way to do this?
Thanks and sorry if it's too remedial a question.
View 2 Replies
View Related
Jan 24, 2008
Hi,
I am a newbie to SQL and learning as I go.
I am currently trying to write a SELECT that returns the difference between 2 identical tables in 2 different SQL databases on 2 different SQL servers.
I believe I have setup the linked servers properly.
Here is the select I wrote;
select *
from [dbnameA].dbo.Item
where not exists
(select * from [dbnameB].dbo.ItemSD
Where [dbnameA].dbo.Item.IMA_ItemID = [dbnameB].dbo.ItemSD.IMA_ItemID)
The error I receive is;
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'dbnameB.dbo.ItemSD'.
Any suggestions are greatly appreciated!!
Thanks,
Michiel
View 7 Replies
View Related