I'm having issues with my sql server 2014 express configuration manager. I need to change protocols under Sql Server Network Configuration but there is nothing, no protocol listed, its empty.
View 3 RepliesI am having a problem with one of the PC's That remotely connects to my server.
When you go to connection properties (under Connect to server in the Management studio) on the users machine there are no options under Network Protocol only the <default> option.
All the rest of our PC's have the option of choosing TCP/IP , named pipe etc etc..
This computer is not able to connect to the server remotely however it can/does when it is on the network.
I figure its because it is attempting to connect over named pipe rather than TCP/IP but i cannot change this in the connection options as it is missing.
And as far as i know on the server i have the default set to TCP/IP but I am really unsure of this.
If anyone can help me out with this i would greatly appreciate it.
Hello. I am called Narsiste.
I have a problem of configuration in SQL server 2005 express train. In fact, I do not know how to make the configuration to tackle the databases SQL server 2005 express train which are on a station has starting from a station B (both being in a network LAN).
But I read in the module of €śconfiguration of the surface of exposure for the services and connections - localhost€? that €śBy defect, the editions Express train, Evaluation and Developer SQL SERVER 2005 authorize only local connections.€?. As it is BY DEFECT, I said myself that it will have to be changed a parameter so that access TCP/IP can go on this version of SQL SERVER.
Here is the message which I have:
€śAn error occurred during the establishment of a connection to the waiter. At the time of connection to SQL Server 2005, this failure can be due to the fact that the default settings of SQL Server do not authorize remote connections. (Provider: Interfaces network SQL, error: 26 - Error during the localization of the waiter/the authority specified) (Microsoft SQL Server, Error: -1)€?.
If somebody encountered this problem in the past, that he wants to inform well me of the solution which he found for this last. Thank you.
I am getting following error when trying to install SQL express 2005 on XPSP2.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine SIGMA-805539A79 Error:2147944122 (0x800706ba).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
I tied re-installing WMI using http://blogs.msdn.com/jpapiez/archive/2004/12/09/279041.aspx link but could not get it working.
Do i need IIS installed? Its not installed on this box...
please suggest something... i am stuck...
Thanks,
I have always (or at least intended to) treat NULL and empty strings separately in my SQL querying history. Now I have run across something that mystifies me (but probably shouldn't) that I would like an explanation for.
Consider this bit o' code:
DECLARE @ORDER CHAR(10)
SET @ORDER=
(
SELECT NULL
)
IF @ORDER <> ''
PRINT 'Not an empty string'
IF @ORDER IS NULL
PRINT 'It is NULL'
Run this and you will get:
It is NULL
I was expecting:
Not an empty string
It is NULL
Why is NULL not passing the 'not an empty string' test? In other words, how does NULL = '' ? Is NULL cast to an empty string for this comparison?
I have installed SQL Server 2012 on Node1 successfully and trying add node on Node2 and its failing with below message. I attached the screen shot.
Here we are not doing multi-subnet failover clustering. Why we are getting extra and asking for IP and what IP should we enter there?Add Node option should automatically detect the IP we configured on Node1.
[Error Message] To support SQL Server multi-subnet failover clustering, you must select at least one valid IP address for every subnet in the cluster.
[Details] Microsoft.SqlServer.Configuration.Cluster.ClusterIPAddressPublicValidationException: To support SQL Server multi-subnet failover clustering, you must select at least one valid IP address for every subnet in the cluster.
I was running an operation to shrink file/emptyfile a data file, and then remove it.
It blocked and caused a huge mess, I suspect on the removal part. But I want to confirm that the emptyfile completed (and that the engine isn't going to try to put more data in there for when I schedule the removal part again a week or more from now).
How does the engine know not to put any more data in there, and how long does that situation last?
My Report service account, by default "Network Service" in the config manager.
 some of my onsite people my mistakenly changed the SSRS service account to the "Local system".
when I am trying to change it back, Manager is ask to create the dialog box 2(encrypt key) given below...
When try to create the encrypt account , report server is stopped working..I had changed the properties of the reporting services also..
I have SQL Server 2014 (Enterprise) on Server A. The service runs under DomainAAdmin.
The Client machine is B, User credentials DomainBUser.
DomainBUser has a share on B that contains a BCP data file. DomainAAdmin has full access to this file.
If I log onto A (the server machine) with either DomainAAdmin or DomainBUser credentials, and run SQL Server Management Studio with Windows Authentication I can run BCP sucessfully using the following:
BULK INSERT [MyTable] from 'Bsharedatafle.tsv' WITH ( KEEPNULLS , KEEPIDENTITY ) However, if I log onto B, (the client machine and the machine hosting the share) and try to run the same bcp command, I get "Access is Denied".
Hi all,
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
Thanks in advance,
Scott Chang
Hi
I have VC++ express and MSSQL SMS express and have an application working nicely locally. The Data explorer and data connections part works really easily.
Now, I want to make the application available to my home network.
I mapped the drive where the database is and called it Z: so I could put my "release" on my other network PC and assumed it would find Z: if I mapped the shared network drive on that machine and called it Z:
But: I can't even add the mapped connection on the local machine, I get:
The file "Z:databasescalorie.mdf" is on a network path not supported for database files. An attempt to attach.....etc"
It works fine on the original F drive.......
Am I approaching this the wrong way. How should I distribute to network PCs?
thanks hopefully
David
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
While doing the restore of the database is it better to copy the backup file locally and restore or restore from the network path is good option?
What kind of the problems we may get restoring the backup from the network path?
SELECT from openrowset(BULKÂ 'SERVERNAMEsomepathsomefile.csv'... fails while SELECT from openrowset(BULK 'c:somepathsomefile.csv' ... works.
I am running the task as a specific sql server user. If I run the same query in management studio using execute as login='batchuser', it also works for any path.
How can I make this work without an extra step moving the data to the local server? Because that would cause extra administration.
I want to use a certificate with 10-years expiration date. I created a new template certificate, based on default computer certificate, and I only change expiration date to 10 years.
In SQL Server SSL configuration, I dont view this certificate. In only view certificate created with the "Computer" template (with validity period of 365 days). All others certificates based on template are invisible to SQL Server
How can I use a custom template instead of the default "computer" template ?
I'm running a primary and secondary on sql server 2012 enterprise edition on windows server 2012, and it runs fine except when a network outage occurs.
Then the handshaking keeps failing, the databases on the replica show as not synchronizing and the only way to fix this is to reboot both primary and secondary.
We keep getting 3520's, etc. on the DR error log
How to eliminate all these prod reboots?
I increased query connection timeouts to 60, but saw no change.
What I asked for: Three Windows Server 2012 R2 machines with independent storage running a SQL Server 2014 AlwaysOn Availability Group. DB1 would be the primary, DB2 would be a synchronous replica, and DB3 would be a remote asynchronous replica.
What I was given: a two-node Windows Server 2012 R2 WSFC to run SQL Server 2014 Enterprise with shared storage and a third (remote) Windows Server 2012 R2 machine with independent storage, also with SQL Server 2014 Enterprise, to host an AlwaysOn Availability Groups asynchronous replica.
DB1 and DB2 (as Cluster1) share an E: drive. The remote DB3 has its own E: drive. Initially, DB3’s E: drive was claimed as a cluster resource and I couldn’t even see it. I’ve had several ugly days trying to make this work and have temporarily given up, installing DB3 as a standalone SQL Server that is no longer part of the WSFC and pointing everything towards that (it was originally a third node in the WSFC).
Is it possible to create an AlwaysOn Availability Group with nested clusters (i.e. create the AOAG with Cluster1 and DB3 and somehow ignore the individual nodes that comprise Cluster1)?
I have a server with 2 processors, 12 cores each making it a 24 core logical system.
My tempdb has 4 datafiles and 4 logfiles created.
I know creating more number of log files in tempdb may not make sense, but how many tempdb data files are supposed to be created?
Should it be 24?
Hi,
I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" />
<membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership>
But when I try to login to the site using the login control the following error occurs:
Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager>
Line 150: <providers>
Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213
It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! .
I'm lost and I dunno what to do, can anyone help?
Here is the mahine.config in case if you need it:<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings>
<system.data><DbProviderFactories>
<add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories>
</system.data><system.web>
<processModel autoConfig="true" /><httpHandlers />
<membership><providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers>
</membership><profile>
<providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></profile>
<roleManager><providers>
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></roleManager>
</system.web>
I have been trying to host my website on Go Daddy for about 3 weeks and I have cleared several problems but this one remains. I can get into the ASPNETDB database for doing logins , etc but I cant access my database called "PINEmgt".
To try to understand where the problem is located,I built a very simple application without login controls and put on it one Detailform accessing a single line table "Signin". I continually get the error message I got with my real app :"The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty. " There is only one connection string in my app -'PINEMgtConnectionString2'. When I run the app locally on my machine it works. After I move everything to Go Daddy, I get the error message and the following dump"
Line 24: </Fields>
Line 25: </aspetailsView>
Line 26: <aspqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStringsINEMgtConnectionString2 %>"
Line 27: InsertCommand="INSERT INTO Signup(first_name, last_name, email, customer_id) VALUES (,,,)"
Line 28: SelectCommand="SELECT * FROM [Signup]"></aspqlDataSource>
This is indeed the code from my single page app.
The dump is:
[InvalidOperationException: The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty.]
System.Web.Compilation.ConnectionStringsExpressionBuilder.GetConnectionString(String connectionStringName) +3039085
ASP.default_aspx.__BuildControlSqlDataSource1() in d:hostinguck7scoutDefault.aspx:26
ASP.default_aspx.__BuildControlform1() in d:hostinguck7scoutDefault.aspx:10
ASP.default_aspx.__BuildControlTree(default_aspx __ctrl) in d:hostinguck7scoutDefault.aspx:1
ASP.default_aspx.FrameworkInitialize() in d:hostinguck7scoutDefault.aspx.vb:912306
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +40
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) +29
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
After Googleing, asking Go Daddy for info (which they dont give) , etc for three weeks, I need serious mental help
in the form of a solution of this problem. Your help with the problem or the name of a good mental health professional in eastern N.C. (maybe both) would be appreciated.
I have seen another thread with this same problem, but the problem seemed to be a typo. I am getting an error when I try to access the web site ..
The connection name 'USASH-AS0013' was not found in the applications configuration or the connection string is empty.
However, in my web.config file I do have a connection named USASH-AS0013. Here is my web.config file (with my user/pwd hidden). Any help would be greatly appreciated.
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<appSettings/>
<connectionStrings>
<add name="USASH-AS0013" connectionString="Provider=SQLOLEDB;Data Source=USASH-AS0013;User ID=****;Password=*****;Initial Catalog="Smart Factory""
providerName="System.Data.OleDb" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<compilation debug="true" strict="false" explicit="true"/>
<pages theme="MySkin" >
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
I was trying to configure maintenance plan to take nightly full database backup and Log backup. I was trying to configure it like in attached file. Any links that i can follow and configure as in attached file.
View 7 Replies View RelatedI am looking for a table where Maintenance Clean Up Task configuration is stored. For example, Delete file older than the following - which is 2 days. Which table can I retrieve the setting in msdb ?
View 5 Replies View RelatedHello,
I need to find out what protocols are used by our client to connect to the SQL Server ?
And is there a way through which we can say that the client are using these protocols, from the Enterprise Manager ?
One more question i have is, I have a SQL server Installation at home on Win98. Why can't i rename the Server Name. I tried using the Sp sp_Dropserver,sp_addserver.
Any help would be of great help.
Thanks,
Shiva
My ASP website is located on one server & the MS SQL 2000 which is located on a separate physical server behind a separate firewall.
My question is related to Application Communication. I want to know how do the Servers exchange data with one another: which (logical connections to use, which protocols to use)?
Hi Folks ,
Got one for you .....
By default what ports and protocols do the following sql tools use....?
Enterprise Manager
SQL Query Analyser
SQL Profiler
And if anybody knows :
Performance Monitor
Mapping drives
Event Viewer
User/Server Manager
Any help would be greatly appreciated .....
This has been driving me crazy for weeks and I can't seem to find any info on it... Here is the scenario:
I've developed an intranet using ASP.NET 2 and SQL Express. I have the site running on my local development computer and also the production server (Windows Server 2003 running SQL Express).
Fully functional connection string for database running on local development computer and running on production server:
<add name="ASPNETDBConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename='|DataDirectory|ASPNETDB.MDF';Integrated Security=True;User Instance=True;Connect Timeout=30" providerName="System.Data.SqlClient" />
Once I roll the site out, I want to be able to develop (to some degree) against the production database. But when changing my connection string to point to the production server from my development computer...
<add name="ASPNETDBConnectionString" connectionString="Data Source=LancelotSQLEXPRESS;Database='D:OfficenetApp_DataASPNETDB.MDF';Integrated Security=True;User Instance=True;Connect Timeout=30;" providerName="System.Data.SqlClient" />
...I get the following error:
User does not have permission to perform this action.
I've found some documentation about not using the "User Instance=True;" command but without that I get:
Cannot open database "D:OfficenetApp_DataASPNETDB.MDF" requested by the login. The login failed.Login failed for user 'WITTEGregL'.
In regular SQL Server, (not Express), I just change the connection string to work against the Local or Production database and it's really easy. I just can't figure out the trick to do the same kind of thing using SQL Express.
Can someone clear this up for me?
Greg
I have notebook, client server application and sql express sp2 on this notebook.
Also, I know domain user login/password,
but I don't know any local user name/password
and I don't know any sql server user name/password.
Domain user is not a local administrator on this notebook.
When notebook connected to the office LAN I am working good with my app-> my sql express as a domain/user.
I'd like to work at home too. I can logon to the system (XP SP2) using domain account when notebook has no network connection. (probably OS caches something)
Is it possible to work with sql express using domain login when no network connection?
PS. old version of this software used MSDE 2000 and it was possible(!).
Thank you.
Hi,
im redeveloping my application from using access 2000/DAO to VS2005 professional/SQL server express using ADO.NET (i use VB), and just want to make sure i'm on the right lines about using sql server express 2005 on a network. i've spent hours reading every concievable article on the web after failing to create a database on a network drive, and ive just come across a good artricle here but want to be sure i understand what i need to do properly.
am i correct in the following please:
i only need 1 instance of SQL Server installed on the server, local PC's that will be using my SQL database do not need SQL server/management express installing?
obviously the database resides on the same server as SQL server 2005 on the network.
i dont need any additional software/drivers etc installing on the local pc's (as a miniumum all local pc's will be running w2000 or XP)
In my local pc's, i set the connection string to point to the instance of SQL server on the server PC
i need to enable the tcp/ip connection stuff on the server.
all local PC's need .NET framework 2.0 installing, as well as the server.
as an additional question, what if an end user has another SQL version installed already, say the enterprise version? is it recommended i link my app. to that, or still use SQL express for my own purposes, and are there any issues with having both database engines existing on the same server?
is there a limit on the number of concurrent users. i have read in some places that there is a limit of 4 or 5, and elsewhere that there is not.
is there anything else i should consider?, and any other help or advice is welcome.
Many thanks in advance
Bob
The network admin is saying that if I run my SQL Express in the office , it will intefere with his SQL Server 2000 connection and its services.
He asked me to disconnect myself from the network and do the work locally, what the!??
I had my SQL express remote connection set to Local and remote connections (using TCP/IP connection )
However , I really dont believe a SQL express running on my laptop would in anyway steal incoming connection to the SQL server 2000 running on the company server.
I now have my SQL express set to Local connections only, I would like to ask you guys does SQL express actually conflict with ANY services running on the same network ??
Thanks a million
hi everyone,
I have a db based on the Tracking_Schema.sql / Tracking_Logic.sql (find in &windir%/Microsoft.NET/Framework/v3.0/Windows Workflow Foundation/SQL/EN), so after executing both of them I get several stored procedures, especially dbo.GetWorkflows. And I have a solution in VS05 which when executed is filling this stored procedure with Instance-Id´s. My question is: how is the working command (like exec, truncate,..) to empty my st.procedure, not to drop/delete it?
Thanks in advance, best regards
bg
If TCP/IP is the only protocol enabled on the General tab of the Client Network Utility, does it mean that other protocols are disabled and will not be used in communicating to SQL Servers on other machines?
In this case, should the registry HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServer ClientSuperSocketNetLib only contain the Tcp entry?
If I have alias setup to use other protocol such as Named Pipes, does it mean that the alias cannot be connected since Named Pipes is not enabled?
Thank you for any help.
Does anyone know of the procedure, steps that need to be followed to allow installing SQL 2005 Express from a network? Since SQL 2005 express requires .NET 2 and the MSI engine 3.1 and MDAC 2.8 it is a real problem pushing it from a network such as active directory using an AIP (Administrator Installation Point).