Hi Folks!
I have a strange thing happening; I have a field that Counts the number of
records and another field that shows the number of clients
(Count(RecordID)=3 and NoOfClients=2) When I do a simple expression
"Count(RecordID)/NoOfClients" the expected result should be 1.5. Instead
the result I get is 1. Any ideas?
Thanks!
Rick
Error 3 Error loading MLS_AZ_PHX.dtsx: The result of the expression ""C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
"C:\sql_working_directory\MLS\AZ\Phoenix\Docs\Armls_Schema Updated 020107.xls"
Directly using C:sql_working_directoryMLSAZPhoenixDocsArmls_Schema Updated 020107.xls
as connectionString works
However - I'm trying to deploy the package - and trying to use expression:
@[User::DIR_WORKING] + "\Docs\Armls_Schema Updated 020107.xls"
which causes the same error to occur
(Same error with other Excel source also:
Error 5 Error loading MLS_AZ_PHX.dtsx: The result of the expression "@[User::DIR_WORKING] + "\Docs\Armls_SchoolCodesJuly06.xls"" on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property. c:documents and settingsviewmastermy documentsvisual studio 2005projectsm l sMLS_AZ_PHX.dtsx 1 1
)
I am trying to code a WHERE xxxx IN ('aaa','bbb','ccc') requirement but it the return values for the IN keyword changes according to another column, thus the need for a CASE function.
WHERE GROUP.GROUP_ID = 2 AND DEPT.DEPT_ID = 'D' AND WORK_TYPE_ID IN ( CASE DEPT_ID WHEN 'D' THEN 'A','B','C' <---- ERROR WHEN 'F' THEN 'C','D ELSE 'A','B','C','D' END )
I kept on getting errors, like
Msg 156, Level 15, State 1, Line 44Incorrect syntax near the keyword 'WHERE'.
which leads me to assume that the CASE ... WHEN ... THEN statement does not allow mutiple values for result expression. Is there a way to get the SQL above to work or code the same logic in a different manner in just one simple SQL, and not a procedure or T-SQL script.
help strange result whan i do this
Code Snippet
SELECT unit_date, unit, ISNULL(NULLIF ((unit + DATEDIFF(mm, GETDATE(), unit_date)) % 4, 0), 4) AS new_unit
FROM dbo.empList
i try to get next unit value to next month
why i get this -1
on date
01/01/2008
1
-1
unit_date unit new_unit
01/02/2008
2
1
01/02/2008
1
4
01/01/2008
1
-1
01/02/2008
1
4
21/01/2008
1
-1
21/01/2008
1
-1
01/02/2008
1
4
TNX
I have a SQL Server 200 database called sampleDB in my local server that uses windows authentication, and all objects are owned by 'dbo' user. I created a creation script using the Eneterprise Manager 2000.
Then I ran the script against a database on my hosting service provider's server, that uses sql server login and not windows authentication, and I found some stored procedures were created with 'dbo' as owner and some with 'sun21170' as owner. 'sun21170' is the user for the database of my hosting service provider's server. Why should not all stored procedures be owned by dbo, as they were in original database on my local server?
Hello all, I have the following Stored Procedure that has been working perfectly for the last year:
CODE
====================================================
DELETE FROM tblReportMainMembers
INSERT INTO tblReportMainMembers (emplid, userid, membership, price, approvecode, purchasedate, wpecend)SELECT DISTINCT tblCart.emplid, tblCart.userid, tblCart.membership, tblCart.Price, tblcart.approvecode, tblCart.addedcart, tblCart.addedcart + 365FROM tblCart INNER JOIN tblMemberships ON tblCart.membership = tblMemberships.idWHERE (tblMemberships.type = 'MAIN') AND approvecode IS NOT NULL AND approvecode <> 'X44444444444'
UPDATE tblReportMainMembersSET tblReportMainMembers.fname = tblRecords.fname, tblReportMainMembers.lname = tblRecords.lname, --tblReportMainMembers.userid = tblRecords.id, tblReportMainMembers.address = tblRecords.home_address, tblReportMainMembers.city = tblRecords.city, tblReportMainMembers.state = tblRecords.state, tblReportMainMembers.zip = tblRecords.zip, tblReportMainMembers.homephone = tblRecords.home_phone, tblReportMainMembers.officephone = tblRecords.office_phone, tblReportMainMembers.email = tblRecords.email, tblReportMainMembers.signup = tblRecords.signupFROM tblRecordsWHERE tblReportMainMembers.emplid = tblRecords.emplid
UPDATE tblReportMainMembersSET tblReportMainMembers.membership = tblMemberships.membershipFROM tblMembershipsWHERE tblReportMainMembers.membership = tblMemberships.id
UPDATE tblReportMainMembersSET tblReportMainMembers.emplid = Onecard.dbo.Accounts.CustomFROM Onecard.dbo.AccountsWHERE tblReportMainMembers.emplid = Onecard.dbo.Accounts.Account
SELECT RTRIM(emplid) AS EMPLID, RTRIM(userid) AS USERID, RTRIM(fname) AS FNAME, RTRIM(lname) AS LNAME, RTRIM(membership) AS MEMBERSHIP, CAST(price AS varchar(12)) AS PRICE, RTRIM(approvecode) AS APPROVECODE, CONVERT(varchar(20), purchasedate, 101) AS PURCHASEDATE, CONVERT(varchar(20), wpecend, 101) AS WPECEND, RTRIM(address) AS ADDRESS, RTRIM(city) AS CITY, RTRIM(state) AS STATE, RTRIM(zip) AS ZIP, RTRIM(homephone) AS HOMEPHONE, RTRIM(officephone) AS OFFICEPHONE, RTRIM(email) AS EMAIL, signup AS SIGNUP FROM tblReportMainMembersWHERE fname IS NOT NULL AND lname IS NOT NULLORDER BY lname
As you can tell from the procedure, i copy some records into a report table, do some modifications, and then send the results to the browser. But all of a sudden, i'm getting timeouts on all my users.
But here is the strange part, when i take the above code and run it using Query Analyzer, it works. And then after that, my users are OK running the clients for about 1 week. And then it starts acting up again.
Everytime i run the code in Query Analyzer, i have no more problems for about a week. Weird isn't it.
Any ideas? Thanks in advance.Richard M.
Hello once again !
This is a very strange result I had noticed while using the IsMissing property.
I had the following Expression.
=IIF(Fields!CertainField.IsMissing = True, "N/A", Sum(Fields!.CertainField.Value))
This should just put the text "N/A" into the textfield if the specific field is missing from the dataset in the report.
I had put this in the following TextFields:-
The group's detail and the table Footer.
The result that I had gotten show an empty textfield in the group's detail but showed "N/A" in the page footer. So I know that the expression I had used is correct since it showed up in the table footer. What baffles me is that it didn't give me a "#Error" in the textfield, but an empty string (which essentially is correct, since this particular field in the dataset is missing to begin with).
The question I am asking is, does this have anything to do with the scope or is it something else, and how do I resolve this problem ?
Sincerely,
Bernard Ong
I am currently studying Transact SQL and playing around with queries from a sample database. Recently I created the following query.
USE MemtrackSQL
SELECT m1.MemberID, m1.Surname, m1.FirstName, m1.DateOfBirth
FROM tblMember m1 JOIN tblMember m2
ON m1.FirstName = m2.FirstName
WHERE m1.MemberID <> m2.MemberID
This simple query is designed to show all members with the same first name as other members. The result I got shows duplicates of existing members an inconsistent number of times even though I specified not to show duplicates with WHERE m1.MemberID <> m2.MemberID
2 Scharenguivil Rodney 1958-06-24 00:00:00.000
2 Scharenguivil Rodney 1958-06-24 00:00:00.000
2 Scharenguivil Rodney 1958-06-24 00:00:00.000
5 O'Grady Patrick 1975-09-23 00:00:00.000
7 Greenfield Lynne 1955-07-26 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
8 Harvy Simon 1965-08-27 00:00:00.000
Any help in explaining where I have gone wrong here would be greatly appreciated.
Cheers
Hi
I have two database called test1 and test2 both are of same size(both device and log). I run the following statements to take the backup of both the databases using the tape device 'tapedevice1'. dump database test1 to 'tapedevice1'
dump database test2 to 'tapedevice1'
After this I run the load statement
load database test2 from 'tapedevice1'.
It just restore the database test2 with test1 data which is added first to the tape with a warning.
Is there any restriction that in a single tape backup of more than one database is not possible.
Your valuable suggestion appreciated
Jiji
this is my problem in stored procedure
1) TABLE SilokE IS MY TABLE OF THE ALL EMPLOYEE
2) I need to see only the employee than in the table v_un
3) i see all the employee
4) problem in this line ( [new date] = @mydate2,[new_shift2] = )
i see 2 rows of result from fields [new date] + ,[new_shift]
how to see only 1 field for each field
new date new_shift new date empid name
---------------------------------------------------------------
2007-12-01 99 2007-12-02 99 2568947 aaa
2007-12-01 99 2007-12-02 99 2845209 bbbb
2007-12-01 99 2007-12-02 99 4807756 ccc
2007-12-01 99 2007-12-02 99 9819590 ddd
2007-12-01 99 2007-12-02 99 10055648 eee
2007-12-01 99 2007-12-02 99 10815413 ffff
2007-12-01 99 2007-12-02 99 11070042 gggg
2007-12-01 99 2007-12-02 99 11162047 hhh
-------------------------------------------------------------------------------
i need to see only one for each field
new date new_shift id name
---------------------------------------------------------------
2007-12-01 99 2568947 aaa
2007-12-01 99 2845209 bbbb
2007-12-01 99 4807756 ccc
2007-12-01 99 9819590 ddd
2007-12-02 99 10055648 eee
2007-12-02 99 10815413 ffff
2007-12-02 99 11070042 gggg
2007-12-02 99 11162047 hhh
Code Block
DECLARE @yeara [varchar](4)
DECLARE @month1 [varchar](2)
DECLARE @day1 [varchar](2)
DECLARE @day2 [varchar](2)
DECLARE @day3 [varchar](2)
DECLARE @mydate1 [datetime]
DECLARE @mydate2 [datetime]
set @yeara ='2007'
SET @month1 ='12'
Set @day1 ='1'
Set @day2 ='2'
set @mydate1 = CONVERT([datetime] ,@day1 + '/'+ @month1 + '/' + @yearA ,103)
set @mydate2 = CONVERT([datetime] ,@day2 + '/'+ @month1 + '/' + @yearA ,103)
SELECT
SilokE
CASE
WHEN (empid IN (SELECT empid FROM SilokEWHERE (shift = 51 )))
THEN 1
WHEN
(empid IN (SELECT empid FROM v_un WHERE (shift = 11 )))
THEN 2
else 99
END,
[new date] = @mydate2,[new_shift] =
CASE
WHEN (empid IN (SELECT empid FROM v_un
WHERE (shift = 11 )))
THEN 1
WHEN
(empid IN (SELECT empid FROM v_un WHERE (shift = 12 )))
THEN 2
else 99
END,
SilokE.empid, SilokE.Fname
FROM SilokE
It seens that a simple script:Update sysxlogins set name = 'AA001' + substring(name, 9, LEN(name)-8)where name like 'ILLINOIS%'Will replace the SQL2000 domain name correctly in sysxlogins:ILLINOISJonesP becomes AA001JonesPBut for some strange reason via ILLINOISJonesP can still logon viaQueryAnalyzer although he is no longer in the sysxlogins tableanymore? SQL has been stop/started, server even rebooted, yet BOTHthe new and old logins seem to both allow QA login, any thought howthe old one is getting thru SQL security?thanks in advance for any help...
View 2 Replies View RelatedHello,
We're trying to launch a SSIS package throw a webservice. This WebService loads a configuration file with "myPackage.ImportConfigurationFile(pathConfig)" and assigns values to some variables with "myPackage.Variables.Item(Parameters.Keys.Item(i)).Value = Parameters.Item(i)". Seems to work.
I we execute the webmethod of the WebService, this works but only when we execute first time, the SSIS finished succesfully. But when we execute a second time the Webmethod, we've a lot of failure with messages:
The result of the expression "@[User::Email]" on property "ToLine" cannot be written to the property. The expression was evaluated, but cannot be set on the property.The result of the expression ""The Import of " + @[User::ExcelFile]+ " is successful"" on property "MessageSource" cannot be written to the property. The expression was evaluated, but cannot be set on the property.
Thx for your help
Hi,
I have a very strange problem using SQL Server 2005
I have several machines running an application, the problem is that on all machines except one of them the size of the result set that gets returned when I execute the following query is dfferent:
Select * from custoemr where EmployeeID = 3
on three out of the four machine the size of the result set is 1000, where on the other machine the size of the result set is 250, No errors are generated..
Can someome please teel me how to preceed in resolving this issue..
thanks,
Is there a way of taking a result from a query and pulling out a certain account number and displaying those account numbers - as fred? Eg. I have a drop down of account number (s) however they pull from a table that only displays them as account numbers. I would like to give more a description to certain account numbers that are pulled. Eg. account number 234 will be fred and account number 555 will be sam etc. Trying to add it to the query on the dataset is complicated, so I was wondering if I created an additional blank field with an expression to be able to do this?Â
View 7 Replies View RelatedI´m creating a report in SSRS 2005 where you can filter after month and year. The result is the total sale for that particular month. What I want to do, is adding an extra column to compare with the result in the same month last year. F.eks. say that I choose january 2008 I would like to see the results for january 2007.
I thought of writing an expression to do that, but as that isn't my stronges side I would appreciate some help
I have a package with an input column that is varchar(8000).
I want to strip the first byte off of this column and put it in one result column and the remainder of the field I want to go to a second column. If the input column is an empty string, I want to return NULL.
Pulling the first byte off works fine, no issues, however putting the remainder of the input column into an output column is giving me a little trouble.
If I use this expression:
LEN(FLD1) == 0 ? NULL(DT_WSTR,1) : SUBSTRING(FLD1, 2, LEN(FLD1) - 1))
I get an error that says my expression evaluates to a string of greater than 4000 bytes.
If I do this instead:
LEN(FLD1) == 0 ? NULL(DT_WSTR,1) : RTRIM(SUBSTRING(FLD1, 2, 7999))
The expression passes muster but I get the warning that I will be truncating the column at 4000 bytes.
In actuality, I don't care if the result column is truncated after 4000 bytes. I find the second solution to be a bit clunky and I'm wondering if anyone can give me a reason why the first solution won't evaluate but the second will?
I have created 1 report with 2 datasets. This report is attached to the 1st dataset.For example,1st one is "Smallappliances", 2nd is "Largeappliances".
I created a tablix and, the 1st column extracts Total sales per Sales person between 2 dates from 1st dataset (Small appliances). I used running values expression and it works fine.
Now, I would like to add another column that extracts Total sales per sales person between 2 dates from 2nd dataset (Large appliances). I am aware that I need to use Lookup expression and it is giving me the single sales value rather than the total sales values. So, I wanted to use RunningValue expression within lookup table to get total sales for large appliances.
This is the lookup expression that I added for the 2nd column.
=Lookup(Fields!salesperson.Value,Fields!sales_person.Value,RunningValue(Fields!sales_amount.Value,
sum, " sales_person"),
"Largeappliances").
I get this error when I preview the report.An error occurred during local report processing.The definition of the report is invalid.An unexpected error occurred in report processing.
(processing): (SortExpression ++ m_context.ExpressionType)
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
View 4 Replies View Related
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
Thanks!
Hi all,
I copied the following code from Microsoft SQL Server 2005 Online (September 2007):
UDF_table.sql:
USE AdventureWorks;
GO
IF OBJECT_ID(N'dbo.ufnGetContactInformation', N'TF') IS NOT NULL
DROP FUNCTION dbo.ufnGetContactInformation;
GO
CREATE FUNCTION dbo.ufnGetContactInformation(@ContactID int)
RETURNS @retContactInformation TABLE
(
-- Columns returned by the function
ContactID int PRIMARY KEY NOT NULL,
FirstName nvarchar(50) NULL,
LastName nvarchar(50) NULL,
JobTitle nvarchar(50) NULL,
ContactType nvarchar(50) NULL
)
AS
-- Returns the first name, last name, job title, and contact type for the specified contact.
BEGIN
DECLARE
@FirstName nvarchar(50),
@LastName nvarchar(50),
@JobTitle nvarchar(50),
@ContactType nvarchar(50);
-- Get common contact information
SELECT
@ContactID = ContactID,
@FirstName = FirstName,
@LastName = LastName
FROM Person.Contact
WHERE ContactID = @ContactID;
SELECT @JobTitle =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN (SELECT Title
FROM HumanResources.Employee
WHERE ContactID = @ContactID)
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN (SELECT ct.Name
FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE ContactID = @ContactID)
ELSE NULL
END;
SET @ContactType =
CASE
-- Check for employee
WHEN EXISTS(SELECT * FROM HumanResources.Employee e
WHERE e.ContactID = @ContactID)
THEN 'Employee'
-- Check for vendor
WHEN EXISTS(SELECT * FROM Purchasing.VendorContact vc
INNER JOIN Person.ContactType ct
ON vc.ContactTypeID = ct.ContactTypeID
WHERE vc.ContactID = @ContactID)
THEN 'Vendor Contact'
-- Check for store
WHEN EXISTS(SELECT * FROM Sales.StoreContact sc
INNER JOIN Person.ContactType ct
ON sc.ContactTypeID = ct.ContactTypeID
WHERE sc.ContactID = @ContactID)
THEN 'Store Contact'
-- Check for individual consumer
WHEN EXISTS(SELECT * FROM Sales.Individual i
WHERE i.ContactID = @ContactID)
THEN 'Consumer'
END;
-- Return the information to the caller
IF @ContactID IS NOT NULL
BEGIN
INSERT @retContactInformation
SELECT @ContactID, @FirstName, @LastName, @JobTitle, @ContactType;
END;
RETURN;
END;
GO
----------------------------------------------------------------------
I executed it in my SQL Server Management Studio Express and I got: Commands completed successfully. I do not know where the result is and how to get the result viewed. Please help and advise.
Thanks in advance,
Scott Chang
HI,
I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected)
The following file has been saved successfully:
C:outputcustomers.rpt 10826 bytes
I choose Query select to a file
then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend
invalid TLV record
Thanks for your help
Ali
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
Hi everyone,
I€™m suffering a queer behaviour when I use BIDS. Concretely, when I open a dtsx from my project (it has 10 packages) many times Sequence Container and Data Flow tasks are invisible. I mean, its lines are not visible at all whereas its titles are. I mean, what you see is just a white box€¦
Then, I€™m gonna Data Flow layer and I have to do double-clik over the tasks and are visible but on Control Flow I don€™t see how to solve.
Curiously in our development and production server such behaviour doesn€™t happen (we are accessing by mean Terminal Server from our workstations)
How odd!. Everything is fine except this.
I want to remark you that such project has been copied from the server, this is, these packages are been built on the server
Thanks for your thougts or ideas,
I'm using a subquery to return a delivery charge line as a column in the result set. I want to see this delivery charge only on the first line of the results for each contract. Code and results are below.
declare @start smalldatetime
declare @end smalldatetime
set @start = '2015-03-22 00:00' -- this should be a Sunday
set @end = '2015-03-28 23:59' -- this should be the following Saturday
select di.dticket [Contract], di.ddate [Delivered], di.item [Fleet_No], di.descr [Description], dd.min_chg [Delivery_Chg], dd.last_invc_date [Delivery_Invoiced],
[code]....
In this example, I only want to see the delivery charge of 125.00 for the first line of contract HU004377. For simplicity I have only shown the lines for 1 contract here, but there would normally be many different contracts with varying numbers of lines, and I only want to see the delivery charge once for each contract.
I have a datasource where i assign the control Parameter value depending on whether theres a value in the querystring or a gridview selectedvalue is indeed selected.When i do this using a querystring it works fine, however, when i do it using gridView_selectedIndexChanged it doesn't work.Here's the code <asp:SqlDataSource ID="jobDetailsDS" runat="server" ConnectionString="<%$ ConnectionStrings:promanConn %>" SelectCommand="SELECT tblJobs.intJobId, tblJobs.intJobStaffId, tblJobs.intJobUserId, tblJobs.intJobCategoryId, tblJobs.strJobTitle, tblJobs.strJobDesc, tblJobs.strJobNotes, tblJobs.dateJobLogged, tblJobs.dateJobDeadline, tblJobs.dateJobCompleted, tblJobs.intJobPriorityId, tblJobs.strJobSolution, tblJobs.boolJobCompleted, tblPriority.priorityName, tblPriority.id, tblPriority.priorityOrder, tblStaff.staffName, tblStaff.id AS staffID, tblProblemCategoriesLookup.strProblemCatName, tblProblemCategoriesLookup.intProblemCatId, tblStaff_1.id AS Expr1, tblStaff_1.staffName AS UserName FROM tblJobs INNER JOIN tblPriority ON tblJobs.intJobPriorityId = tblPriority.id INNER JOIN tblStaff ON tblJobs.intJobStaffId = tblStaff.id INNER JOIN tblProblemCategoriesLookup ON tblJobs.intJobCategoryId = tblProblemCategoriesLookup.intProblemCatId INNER JOIN tblStaff AS tblStaff_1 ON tblJobs.intJobUserId = tblStaff_1.id WHERE (tblJobs.intJobId = @intJobId)" InsertCommand="INSERT INTO tblJobs(intJobStaffId, intJobUserId, intJobCategoryId, strJobTitle, strJobDesc, strJobNotes, dateJobLogged, dateJobDeadline, intJobPriorityId, boolJobCompleted) VALUES (@intJobStaffId, 56 , 39, @strJobTitle, @strJobDesc, @strJobNotes,{ fn NOW() }, { fn NOW() }, @intJobPriorityId, 0); "> <SelectParameters> <asp:Parameter Name="intJobId" Type="int32" /> </SelectParameters> <InsertParameters> <asp:Parameter Name="intJobStaffId" Type="Int32" /> <asp:Parameter Name="strJobTitle" Type="String" /> <asp:Parameter Name="strJobDesc" Type="String" /> <asp:Parameter Name="strJobNotes" Type="String" /> <asp:Parameter Name="intJobPriorityId" Type="Int32" /> <asp:Parameter Name="intJobUserId" Type="Int32" /> </InsertParameters> </asp:SqlDataSource>Code Behind ElseIf dest > 0 Then jobDetailsDS.SelectParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") notesDS.SelectParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") notesDS.InsertParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") gvActiveJobs.Visible = "False" End If End Sub Protected Sub gvActiveJobs_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles gvActiveJobs.SelectedIndexChanged gvActiveJobs.Visible = "False" jobDetailsDS.SelectParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue notesDS.SelectParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue notesDS.InsertParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue End Sub I also debugged and checked the value of gvActiveJobs.SelectedValue and it is what i was expecting but its still no good.Can anyone help?ThanksMatt
View 2 Replies View RelatedI moved a table from one file group to another file group. After moving the table the row count show 0 but when I open the table it’s returning all the rows. Is something wrong with the table? Do I have created a cluster index and drop on the table?
View 1 Replies View RelatedHi,
I have table in my db thats used as a temporary table. At the end of the day it contains thousands of records which get summarized then all are deleted. I recently moved the application over to a new server with pretty much the same hardware config and noticed a big performance hit when running queries on this temp table (455 milliseconds as opposed to 1) In short, the fix was dropping the table and re-creating it.
Anybody know how this could be? I know that even if you delete records from a table, the table still seems to retain its physical size on the hard drive, could this have something to do with it?
Thanks
CREATE TABLE #users(users varchar(50),pasw varchar(50),title varchar(50))
insert into #users select 'test','abcdef','ceo'
SELECT * FROM #users
alter table #users alter column pasw nvarchar(50)
update #users set pasw=pwdencrypt(pasw)
SELECT * FROM #users
What happens to the TITLE column?
I had a table like the above with users and passwords in the Production DB. The password column had VARCHAR type. I changed it to NVARCHAR and encrypted the passwords. When i executed the SELECT *, the title column appeared like this. :eek:
If i query the table by column names instead of * i see the correct values. I couldn't understand what behaviour is it.
Howdy!
Hi Experts,
Am able to restart my local sql server using a login which dont have a sysadmin privileage.This login only have access to a particular database .Its only having datareader and datawriter as DB roles but still am able to restart the server.Please help
TIA
RKNAIR
I am using c# and ASP.NET 2 and I am getting a very strange error. I
have a field called CompanyID in SQL Server 2005, and it allows null
values in it. When this CompanyID is not NULL, ie for example it is
202, then when i press the update button it allows me to update
perfectly in the database. However if the CompanyID is NULL,
and I try to update the companyID, to lets say 202, the application
just crashes with the following message:- System.InvalidCastException: Object cannot be cast from DBNull to other types. I tried to set some breakpoints in the application to debug, however it does not even pass through these breakpoints! Any ideas on what the problem can be or how I can debug? Thanks for your help and time Johann
This is the actual statement displayed from Response.Write in classic ASP. INSERT INTO WOTasks (WoNum,TaskNum,TaskDesc,TaskMemo,Account,ModifyDate,Estimate,TaskHours,Unit,UnitCost,TotalCost) SELECT '06-012497',TaskNum,TaskDesc,TaskMemo,Account,'2006-Oct-3',1,TaskHours,Unit,UnitCost,TotalCost FROM Tasks WHERE procnum = '000002' There are 4 records returned from the SELECT part of the statement. In some situations, 4 records are inserted to WOTasks table, in others, only 1 record is inserted. I can't find out why 1 record, instead of 4, record is inserted. A form page submits the form to the save page using post method. The above statement is contained in the save page. When one of the form textbox is filled, 1 record is inserted. When the textbox is not filled, 4 records are inserted. You may think the textbox has something to do with the behaviour. I also think so but the content of the textbox does not affect the sql statement. In both cases, the insert statement is the same. In the actual codes, only strings in quotes are variables and the rest are hardcoded. When I run the statement in SQL Server, 4 records are affected. No such problem when connected with Access.The actual code belowSub AddTask(ByVal proc, ByVal wonum) Dim sSQL sSQL = "INSERT INTO WOTasks (WoNum,TaskNum,TaskDesc,TaskMemo,Account,ModifyDate,Estimate,TaskHours,Unit,UnitCost,TotalCost) SELECT '" & wonum & _ "',TaskNum,TaskDesc,TaskMemo,Account,'" & curDate & "',1,TaskHours,Unit,UnitCost,TotalCost FROM Tasks WHERE procnum='" & proc & "'" 'Response.Write sSQL:Response.End conn.Execute sSQL, , 128 End Sub
View 2 Replies View RelatedHi there I have this statement I have written as follows:strCommand = "SELECT * FROM tblstock WHERE Type='"&Statement &"' AND Description like'"&criteria &"%' OR Tag like'"&criteria &"%'OR Location like'"&criteria &"%' OR LAN like'"&criteria &"%' OR RAM like'"&criteria &"%' OR CD like'"&criteria &"%' OR OS like '" &criteria &"%' OR SN like'" &criteria &"%' OR DeviceStatus like'" &criteria &"%' ORDER BY " &sSortStr The variable "Statement" is passed into the sub as "PC" which means only records of type "PC" should be displayed along with any other criteria. The issue I'm having is that when I specify criteria I'm also recieving other types eg "Cameras" if they contain any of my criteria.. I can't understand how because in the statement I tell it only to display records of type "PC".. Anybody know what I'm doing wrong? Thanks
View 3 Replies View RelatedI've done a new tabel that insert the UserId that in a uniqueidentifier get from Membership.GetUser().ProviderUserKeySo if I want to make a select statement threw storedprocedure in codebehind it runs as it shouldCode behindDim GetCustomersCars As CustomerCarByUserId = New CustomerCarByUserId MyCars.DataSource = GetCustomersCars.CarByUserId(Membership.GetUser().ProviderUserKey)MyCars.DataBind() But in when I use ObjectDataSource it fails<asp:ObjectDataSource id="ObjectDataSource1" runat="server" selectmethod="CarByUserId" typename="CustomerCarByUserId"> <SelectParameters> <asp:Parameter defaultvalue="Membership.GetUser().ProviderUserKey" name="UserId" type="Object" /> </SelectParameters> </asp:ObjectDataSource>I've tried with Membership.GetUser().ProviderUserKey.ToString(), but that doesnt work. Error message:InvalidCastExceptionI connect to the same source in both cases.Any one with an Idee ?
View 1 Replies View Related