Hey guys,
m new to SQL i mean really new so i appreciate all the help i can get on this as soon as possible.
Is it possible to extract 3 foreign keys from a single table into one record/row on a different problem ?
Thnx guys hope to hear soon
I need to write a 'select' statement to fetch data from different tables, which are located on different servers.
Can any one help in writing this 'select' statement with out moving the tables on to same server.
Thanks in Advance.
Murali Raparla.
I need to return the number of min from a table I am using the following query. But it gives me an error "Msg 241, Level 16, State 1, Line 1Syntax error converting date time from character string". can someone please help.SELECT DateDiff(Mi, CAST((SCHDATE + ' ' + SUBSTRING(SCHTIME, 1,2) + ':' + SUBSTRING(SCHTIME, 3,4)) AS DateTime), CAST((ACTDATE + ' ' + SUBSTRING(ACTIME, 1,2) + ':' + SUBSTRING(ACTIME, 3,4)) AS DateTime)) AS StopMinutes, BACPY, BARTRM, BAORD, BSAPOR, BABLN, BSASSQ, BSACNO, CSTRDATA, BSASCY, BSASST, TTLREV, SHAALP, SCHDATE, SCHTIME, ACTDATE, ACTIME, OQTCOD, BAADES, PCS, WGT, Tractor, Driver FROM dbo.JCI_Delivery_Report
View 3 Replies View RelatedHi,
i have 3 fields: start_inspect_datetime, end_inspect_datetime, Diag_Hrs.
so i want to get the difference of start and end datetime=Diag_Hrs.
here i am using the below stored proc.
but i am getting only the hours or minutes or seconds.
so how to get the hours(if diff>59 mins),minutes(if diff>59 sec),seconds.
for Ex: here diff=185 sec. then Diag_hrs should be 3 hours,0 mins, 5 secs.
so how we'll get this.
pl help me out asap.
Thanx
reddy
select Asset_Diag_Hrs= DATEDIFF(hh,start_inspect_datetime,end_inspect_dat etime) from asset_diag_trans_table
--where Gpc_no=@GPC_no
--select Asset_Diag_Hrs=(datediff(mm,start_inspect_datetime ,end_inspect_datetime)) from asset_diag_trans_table
-- where Gpc_no=@GPC_no
select Asset_Diag_Seconds=(datediff(ss,start_inspect_date time,end_inspect_datetime) ) from asset_diag_trans_table
where Gpc_no=@GPC_no
Can i restore a diff. backup alone without a complete backup?
(what i am trying is this.....there are two different servers at two diff. places....i need to have both servers in sync. at all times.modifications will take place in one server and the modifications have to be reflected in the other server.i could not go for replication as the servers cannot be connected.sending complete backups daily will be a overhead .hence planning to take complete backup once and send diff. backups alone on subsequent days to the other server.
how can i achieve this?)
Dear all
I am new to the MS SQL, my problem is as follows.
I am having a online database on sql 2k.
every 15 days we have to give payout from our system, so we
have a offline server in our office, we take the complete backup of that day & restore the same on the offline server,
& start the payout process.
The problem is that the full backup is a big file & take a lot of time for downloading from online server.
is it possible that we take on diff. backup of that day & will restore the same on the offline server so the file will take less time to download.
but my offline backup is 15 days old, will that update all the records or not?
regards
Abhijit
I have 2 databases:
1 from production and 1 from development.
None of the developers kept a changelog so i need to know what has changed (or what is different between the 2).
Any Ideas on how to do this?
In playing with differential backups, i have taken a full last night, 17GB, took my first diff today 16.5GB, took another diff right after, it was still 16.5GB, took another diff right after 16.5 GB. This database has 0 activity during the day, the import takes place @ night, and select's are done to it during the day. Any help would be greatly appreciated
View 3 Replies View RelatedHello,
I wanted to know the difference between SQL Server 2005 ( RTM) Version and the regular SQL Server 2005 SP2. And does the RTM version have any service packs.
Thanks
Are there any tools/utilties that can diff 2 sql server databases. I know the DB Pro Edition of VSTS can do it, but its hard to justify a jump from my $800 copy of VS2005 Pro to a $5k-6k version of VS just to get database diff. The tablediff looks promising but I need it to do SPROCS and SFUNCS too. Any helps or recommendations would be appreciated.
View 4 Replies View RelatedHi All,
What is the difference betwen real and float datatype of SQL server.
Please one exapmle for each.
The real datatype is like a float except that real can only store numbers.What does it mean: float can store even characters.
Thanks
Abdul
What is the difference between money and smallmoney, and is there a way to format these?
View 3 Replies View RelatedHi.
When I execute the following sql statement in SQL 2000 DTS or query analyzer, I received the following error message. I used [ ] because my field names have spaces in between.
The same sql statement ran perfect in SQL 7. What could be wrong? Please advise. Thanks a million.
Update SAPvsSQL set [Sales Organisation] = sales_org,
[Value Out By] = val_diff, [Qty Out By] = qty_diff
Error message:
Server: Msg 16882, Level 11, State 1, Procedure sp_runwebtask, Line ....
SQL Web Assistant: Web task not found. Verify the name of the name for possible errors.
Best regards
Hi, I need to know the difference between Numeric and Decimal datatypes. In which we case we use numeric and in which case we use decimal? I searched in some sql related websites and came to know that both are same. Then what is the need of these two datatypes? Either Numeric or Decimal is alone enough? Please explain me in detail ....
Awaiting your replies...
Thanks,
Rakesh.
HEY,
CAN YOU TELL ME THE DIFFERENCES BETWEEN VARIOUS SQL
hi
could any one help me in differentiating between varchar and nvarchar
Thanks in advance
I have a handful of jobs that I need to troubleshoot, but this one will hopefully give me enough insight to do the rest myself. I need to figure out why a Maintenance Plan that performs a Diff Backup on 4 databases, and then a transaction log back up on the 4 databases is failing. I just get the following error message, and I cannot tell what failed.
Executed as user: <SERVER_NAME>SYSTEM. ... 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 11:20:05 AM
Progress: 2008-01-03 11:20:05.95
Source: {SOME_STUFF_WAS_HERE}
Executing query "DECLARE @Guid UNIQUEIDENTIFIER EXECUTE msdb..sp".: 100% complete
End Progress
Progress: 2008-01-03 11:20:06.35
Source: Back Up Database (Differential)
Executing query "EXECUTE master.dbo.xp_create_subdir N'D:Program F".: 100% complete
End Progress
Progress: 2008-01-03 11:20:06.35
Source: Back Up Database (Differential)
Executing query "EXECUTE master.dbo.xp_create_subdir N'D:Program F".: 100% complete
End Progress
Progress: 2008-01-03 11:20:06.37
Source: Back Up Database (Differential)
Executing query "EXECUTE master.dbo.xp_create_subdir N'D:Program F".: 100% complete
End Progress
Progress: 2008-01-03 11:20:06.37
Source: Back Up Database (Differential) ... The package execution fa... The step failed.
How can I find out how to fix this problem? And please let me know if I am doing something wrong. (For instance, perhaps those two tasks shouldn't be together.)
- - - -
- Will -
- - - -
http://www.strohlsitedesign.com
http://blog.strohlsitedesign.com/
http://skins.strohlsitedesign.com/
I have a table t1 with two columns : c11 varchar(32) , c22 varchar(32)The data in the table is :'11', 'aa01'and on upto'11', 'aa50' : total 50 entries'22', 'b01''22', b'02''22', b'03''33', 'c01' to '33', 'c40' : total 40 entries'44', 'b02''44', 'd01''44', 'd01''44', 'd01'How can write a query which will bunch together values of c11with rows 5, and then bunch together values of c11 withrows < 6, and add them up.My output should be :'11' 50'33' 40'others' 7 (3 rows for '22' and 4 for '44' are bunchedtogetheras the # of rows < 6, and added. 3+4 = 7)
View 1 Replies View Related
Country1
Country2
2006
2007
% diff
2006
2007
% diff
Segment1
80
90
12.50%
60
50
-16.67%
Segment2
150
120
-20.00%
80
100
25.00%
Total
230
210
-8.70%
140
150
7.14%
I need a to build a result as shown above in matrix, many countries will be in resultset and each country performance is evaluated based on previous year. (90-80)/80=12.50%. the problem is this year and segment values are calculated based on aggregate functions and is derived by means of specific formaule. for country1 in year 2006 for segment1 the value 80,90 is arrived by using sum(leadtime*Ordervalue)/sum(Ordervalue).
So i cannot store these current and previous year values for calculating the % bymeans of custom code, runningvalue cannot be used as the formulae already has an aggregate, is there any direct way to locate the cell references just like excel R1C1 with matrix? if so then i can refer the cells for calculating my %. please help.
Thanks in advance.
brinda
My goal is to add a diff into a query that grabs data from 2 different tables.
The code:
SELECT
MIN(TableName) as TableName,
ID1, COL1, COL2, COL3, COL4, COL5, COL6, COL7, COL8
,COL9, COL10, COL11, COL12, COL13, COL14, COL15, --COL16,
COL17, COL18, COL19, COL20, COL21
FROM
(
SELECT 'Table A' as TableName,
SessionID as ID1,
StartDateCode as COL1,
StartTimeCode as COL2,
EndDateCode as COL3,
EndTimeCode as COL4,
HandledByCode as COL5,
DispositionCode as COL6,
DNISCode as COL7,
CallServiceQueueCode as COL8,
ApplicationCode as COL9,
IVREndPointCode as COL10,
BankCode as COL11,
TotalQueueTimeSS as COL12,
TotalAgentTalkTimeSS as COL13,
TotalAgentHoldTimeSS as COL14,
TotalAgentHandleTimeSS as COL15,
--TotalIVRTimeSS as COL16,
AfterHoursFlag as COL17,
SourceSystemID as COL18,
anubisTransferExtNumber as COL19,
anubisEndPoint as COL20,
AccountNumber as COL21
from [pdx0sql45].Rubicon_Marts.dbo.INB_Call_Fact
where startdatecode between 2738 and 2769
UNION all
SELECT 'Table B' as TableName,
SessionID as ID1,
StartDateCode as COL1,
StartTimeCode as COL2,
EndDateCode as COL3,
EndTimeCode as COL4,
HandledByCode as COL5,
DispositionCode as COL6,
DNISCode as COL7,
CallServiceQueueCode as COL8,
ApplicationCode as COL9,
IVREndPointCode as COL10,
BankCode as COL11,
TotalQueueTimeSS as COL12,
TotalAgentTalkTimeSS as COL13,
TotalAgentHoldTimeSS as COL14,
TotalAgentHandleTimeSS as COL15,
--TotalIVRTimeSS as COL16,
AfterHoursFlag as COL17,
SourceSystemID as COL18,
anubisTransferExtNumber as COL19,
anubisEndPoint as COL20,
AccountNumber as COL21
from pdx0sql04.Rubicon_Marts.dbo.INB_Call_Fact
where startdatecode between 2738 and 2769
) tmp
GROUP BY ID1, COL1, COL2, COL3, COL4, COL5, COL6, COL7, COL8
,COL9, COL10, COL11, COL12, COL13, COL14, COL15, --COL16,
COL17, COL18, COL19, COL20, COL21
HAVING COUNT(*) = 1
ORDER BY 2,1
---------
Is it possible to add a command into the query to output diff/compare scenario?
Thanks in advance for any help.
Friends,
I have taken backup of a database, of which Data (MDF) & Log (LDF) files are located on "E:...." directory.
Now, I am using the same backup file to restore on another PC which is having no partitions at all. I mean now I have to restore the database using same backup file, of which Data & Log files should be located on "C:...." directory only, as it has no partitions.
This restore process gives me error :
Restore failed for Server 'HSVMMICROFIT'.
Details : System.Data.SqlClient.SqlError: The operating system returned the error '5(Access is denied.)' while attempting 'RestoreContainer::ValidateTargetForCreation' on 'C:Program FilesMicroFitHealthStar v6.0 Server EditionDataMICROFIT_HealthStar_Data.mdf'.
What is to be done, in order to restore the database from the same back up file successfully, regardless whether the original physical location of the MDF & LDF file, is existing on current PC ??????????????
Please try to solve the same for me.... W8ing...
Hi @all,
I designed a query in report designer, data tab. This query runs 24 secs, when I execute it from the data tab in report designer.
Publishing the report and running it from the report server. The query needs 40x the time as in report designer.
Looking at the Execution Log, the report needs 800 secs for TimeDataRetrieval.
Why is it so much slower to run the query from report server? The report designer has also to retrieve the data, and runs so much faster.
Thanks for any hints
T
Hi ,
What is the diff between Logins & Users in SQL Server?
thanks
Babu
The DB Enginee is SQL2005 SP1. In MSSMS
the following query always finishes within 1 minute
SELECT *
FROM t1 INNER JOIN t2 ON t1.key= t2.key
where t1.StartTime >= '3/19/2008' AND t1.EndTime <= '3/20/2008'
AND t2.StartTime >= t1.StartTime AND t2.StartTime < t1.EndTime
however, the following always takes 10+ minutes
declare @pStartDate datetime
declare @pEndDate datetime
set @pStartDate='3/19/2008'
set @pEndDate='3/20/2008'
SELECT *
FROM t1 INNER JOIN t2 ON t1.key= t2.key
where t1.StartTime >= @pStartDate AND t1.EndTime <= @pEndDate
AND t2.StartTime >= t1.StartTime AND t2.StartTime < t1.EndTime
Both return same result. The only diff. is the blue part. Why the second one performances so badly?
Thanks.
We recieve about 4 million rows of data from a client per week. Each file is a complete snapshot of their data, we need to be able to find the rows that are different or new in the current weeks file compared to last weeks file.
Is this possible using 2 Flat file sources and some kind of sort/merge join?
If you are familiar with ORACLE or postgres its similar to a "MINUS" or "EXCEPT" respectively. Right now we load both files to separate tables and compare them in sql server which is very slow.
Diff. b/w Stored Procedures and Function??
When any of them is appropriate to use?
wots the diff b/w ncharand integer....??
View 1 Replies View RelatedHi alll,can anyone tell me that In which cases cast is used in db and what is diff betn cast and convert
View 9 Replies View RelatedI have 3 sql queries:ex:select * from table 1 where id = 2select * from table 1 where name = 'name'select * from table 1 where date = 'date' I want to combine these three queries into one stored procedure.I am not sure how to do this.i want to display some column data from these 3 queries on 3 table rows as:<td> colum1 </td><td> colum2 </td><td> colum3 </td>so my SP should return some datatable .any suggestiions
View 3 Replies View RelatedHi,
Does any one have a workaround this issue. If I designed a package from SQL2000 and save it on SQL 7, I can't open/execute it from SQL 7.0. My workstation is SQL 2000 and the server is SQL 7.0, even if I have the same SQL 7 but different SP.
Thanks
select count(orgcode)
from orglevel
where orglvl = 1 and exists (select 'x' from empcomp where eecemplstatus = 'A' and eecorglvl1 = orgcode)
26 rows
select count(orgcode)
from orglevel
where orglvl = 1 and orgcode in (select distinct eecorglvl1 from empcomp where eecemplstatus = 'A')
26 rows
select count(orgcode)
from orglevel
where orglvl = 1 and not exists (select 'x' from empcomp where eecemplstatus = 'A' and eecorglvl1 = orgcode)
6 rows
select count(orgcode)
from orglevel
where orglvl = 1 and orgcode not in (select distinct eecorglvl1 from empcomp where eecemplstatus = 'A')
zero rows
Confusing the hell out of me .....
I have 17 tables with names as Breaktable1, Breaktable2,.... till
Breaktable17
i make a query like this
set nocount on
Declare @sEventtable varchar(20)
Declare @sstartzoneid varchar(20)
Declare @ssttopzoneid varchar(20)
Select @sstartzoneid ='1'
Select @ssttopzoneid = '17'
select @sstartzoneid = convert(smallint,@sstartzoneid)
if @sstartzoneid<> 0
DECLARE Tablecursor FOR <-------> ( error here )
select status, sum(cost)
FROM "breaktable " + @sstartzoneid
where breakdate=DATEDIFF(day,'08/12/1960','03/29/2003')
group by status
CLOSE tableCursor
DEALLOCATE tableCursor
can somebody help ????
SQL Server 2000 sp3 Enterprise (8.00.818) running on W2K Adv Server cluster.
DB's and backups resided on a fibre SAN attached IBM FAStT 500 storage controller.
I had problems with random restore failures, getting errors such as "3270 Internal Consistency Error" on log restores or on full restores after reporting problems with some of the files. This was fixed (we thought) by disabling the read caching on the FAStT 500 storage controller, per Microsoft's recommendation.
We have a custom-written log shipping solution that maintains a 2nd copy of our user DB on the same system, so there's 700+ backups/restores of various types in the course of a week. After two months of error-free operation, we just got another Internal Consistency Error, but this time on a differential restore, which was a first. Looking back, we realized we were running a DBCC INDEXDEFRAG command on the source DB at the time the differential backup was running. Taking a new differential and using it in the restore sequence worked fine, so clearly the problem was in the first diff backup file.
Anybody else noticed any problems with running DBCC INDEXDEFRAG at the same time as a differntial backup?