4 Part Name Join Returning Too Much Data
Jan 12, 2008
Hello,
I recently created a linked server to db2. When I do a join on the linked server it is returning to much data.
select * from table1 left join [linkedServer]..Schema.Table as tb1 on table1.id=tb1.id
For now, I had to first get the ids I wanted from table1 and then use a subquery to join table1 on the a result set produced from a query to the linked server that only specified those ids. Below is an example
select * from table1 left join (select col1 from [linkedServer]..Schema.table where id=1 or id=2) as tb1 on table1.id=tb1.id
I'm guessing I have some setting wrong. One of the biggest reasons for me to use the four part name is so I can do joins like the first example.
Please let me know if you have any ideas.
Thanks
View 4 Replies
ADVERTISEMENT
Aug 3, 2015
I am writing a stored procedure to prepare some reports.
The issue is that I am summing up the combined bid, 'QuoteTotal' + Sum(InvoiceItemAmount) (eg, quote add ons).
When part of the larger query it returns a different, and incorrect amount. The query listed after the main query is just that line and it's appropriate parts and it returns the correct amount. What can I do to correct this and where lies the problem so I can learn from this situation?
alter PROCEDURE [dbo].[Select_Quote_Info_By_Salesmen_By_Status]
@Salesmen nvarchar(50),
@QuoteStatus nvarchar(50)
AS
BEGIN
SET NOCOUNT ON;
[code]...
View 5 Replies
View Related
Sep 13, 2004
Hi, I have a table that has the following field and results.
I want a where clause that returns records that start 0000........
I need to exclude those records that start 0001..........
Can anyone help
oseq
-------
0000
0000.0000
0000.0000.0000
0000.0000.0000.0000
0000.0000.0000.0000.0000
0000.0000.0000.0000.0001
0000.0000.0000.0001
0000.0000.0001
0001
0001.0000
0001.0001
0001.0002
0000.0000.0002
0000.0000.0003
0000.0001
0000.0001.0000
0000.0001.0000.0000
0000.0001.0000.0000.0000
0000.0001.0000.0000.0000.0000
0000.0026.0004.0009
0000.0026.0004.0010
View 3 Replies
View Related
Dec 7, 2006
Getting back way too many records with this on - over 4500 and should only be about 350.....
Here's the sql that's not working right:
SELECT c.Name, a.ID, a.Description, s.Status, b.Location, a.scheduleBegin, a.scheduleEnd
from tblEquipments a
inner join tblEquipments_Group U on u.categoryID = a.EquipmentType
inner join tblStatus S on a.status = S.statusID
and u.subCategoryID = @type
inner join tblLocation b on a.status = b.locationID
inner join tblSubCategories c on u.subCategoryID = @type
and c.Parent = @type
The table tblSubCategories has a field Name that I need.
tblSubCategories has a field, Parent, that will = @type
See this post for the other table fields if needed.
http://forums.asp.net/thread/1489880.aspx
If I omit the last inner join, all is ok, but I need that last bit of info - the c.Name.
Suggestions?
Thanks,
Zath
View 1 Replies
View Related
Apr 15, 2008
I made a part 2 because it would clear things up I guess.
Right, so I have this SP with
....
Select
ZMZKOrder zk
right join ZMProduct pr on (zk.zkproductid = pr.productid)
...
AND we have
...
Where
((zk.zkmoduleid = @moduleid) or (zk.zkmoduleid is Null))
....
Actually what I want is:
If there really is a corresponding productid (because of the right join, this doesn't have to be true) it must check that this zk.zkmoduleid = @moduleid is true.
And if there is NO corresponing productid, it must check that zk.zkmoduleid is Null is true.
And not both at the same time.
Does anyone have any ideas please?
View 18 Replies
View Related
Jul 14, 2015
I have a table like this :
reg.no | description | start_date | end_date | load_date
I want to join this table with itself on reg. no. But not all the rows in table must be joined.
But for example, rows with load_date 01-07-2015 to be joined with rows with load_date 02-07-2015. And the rest of the rows should not used in join (for example, rows having other load_dates)
Is this possible ? and how?
View 4 Replies
View Related
Jul 22, 2014
I'm writing a query where I have multiple left-outer joins but I keep getting multi-part identifier error. See the query below?
SELECT gl.seg5 Natural
,gl.seg2 Office
,gl.seg3 Dept
,gl.seg4 Team
,gl.seg6 Sub
,gl.seg7 Tkpr
,gl.seg1 Comp
,'CHK' Source
[Code] ....
Errors
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.baid" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.cknum" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.ckline" could not be bound.
View 5 Replies
View Related
Nov 6, 2006
Hello,
i am facing a bizarre problem, accessing data from a remote server which has been linked to my sql.
My SQL server is 2005 and the remote server is SQL 2000.
i have linked the remote server (called LinkedServer) so that when i run this query:
SELECT * FROM LinkedServer.SomeDB.dbo.SomeTable
executes successfully! However, when i run a similar query like this:
SELECT Column1 AS Col1,
LinkedServer.SomeDB.dbo.SomeTable.Column2 as Col2,
Alias.Column3 as Col3
FROM LinkedServer.SomeDB.dbo.SomeTable
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable1 ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = LinkedServer.SomeDB.dbo.SomeOtherTable1.Column3
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable2 AS Alias
ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = Alias.Column3
It gives me this error:
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column2" could not be bound.
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column3" could not be bound.
I have noticed that this error is generated only for the selected columns whose path has either been repeated (e.g. "LinkedServer.SomeDB.dbo.SomeTable.Column2" as opposed to "Column2") or for columns which are from aliased tables.
What is going on?!?!?!??!?!?!
Any Help would be tremendously appreciated!!!! 8..)
View 8 Replies
View Related
Nov 3, 2005
SELECT
[tblSections].[pageTitle],
[tblSections].[sectionURL],
[tblSectionContents].[articleID],
[tblSectionContents].[fileID],
[tblSectionContents].[linkID],
[tblCopy].[copyText],
[tblFiles].[fileName],
[tblFiles].[fileCaption],
[tblGroupings].[grouping],
[tblLinks].[linkURL]
FROM [tblSections]
LEFT JOIN [tblSectionContents] ON [tblSectionContents].[sectionID] = [tblSections].[id]
LEFT JOIN [tblCopy] ON [tblSectionContents].[articleID] = [tblCopy].[id]
LEFT JOIN [tblFiles] ON [tblSectionContents].[fileID] = [tblFiles].[id]
LEFT JOIN [tblGroupings] ON [tblFiles].[groupingID] = [tblGroupings].[id]
LEFT JOIN [tblLinks] ON [tblSectionContents].[linkID] = [tblLinks].[id]
WHERE [tblSections].[id]=2
ORDER BY
[tblSectionContents].[articleID],
[tblSectionContents].[fileID],
[tblSectionContents].[linkID]
If I pass it the ID of a section that has files or copy or [stuff in other tables] attached, then I get a result set that makes sense.
But if I pass it a section ID that doesn't reference any other content tables (ie: the section just has a title and a link URL), I don't get anything back.
Shouldn't it should still get me the fields from the row in tblSections that matches the ID I'm passing it?
How can I make it so that it does?
Thanks :)
View 3 Replies
View Related
Sep 19, 2007
Hi,
I have three tables:
1 Order Details
2 Product Info
3 Received Qty
The query is pretty simple however I'm getting incorrect results.
The query grabs a load of information (including a SUM statement) from the order details tbl.. this is INNER JOIN ed to the products tbl to match an ID field which grabs some extra info from the product info tbl.
all fairly straightforward and works without a problem..
However I now need to add in the received qty tbl (as the name suggests this keep a track of the qty's of items received)
I need to join this tbl to the order details tbl based on a unique ID from the orders tbl and then SUM together all of the entries in that received qty tbl for that item.
Result is I get a single record which shows the qty ordered (from the order details tbl), and the total received (from the received qty) tbl
These are held in a seperate tbl as an order can be deliveryed in several stages.
Here is my statement:
SELECT PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID,
dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem,
dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived,
SUM(dbo.Suppliers_POs_Details.Qty * dbo.Suppliers_POs_Details.PricePerItem) AS LineTotal, SUM(dbo.Suppliers_POs_Details_Received.Qty)
AS QtyReceived
FROM dbo.Suppliers_POs_Details INNER JOIN
PDS_Login.Supplier_Products ON dbo.Suppliers_POs_Details.ProductID = PDS_Login.Supplier_Products.ProductID LEFT OUTER JOIN
dbo.Suppliers_POs_Details_Received ON dbo.Suppliers_POs_Details.PODetailsID = dbo.Suppliers_POs_Details_Received.PODetailsID
WHERE (dbo.Suppliers_POs_Details.POID = @POID)
GROUP BY dbo.Suppliers_POs_Details_Received.Qty, PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode,
dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem,
dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived,
dbo.Suppliers_POs_Details_Received.Qty
The problem is, if there is more than one relating record in teh Received Qty tbl instead of that being added together as I want, two results appear...
It's obviously something simple but I can't seem to figure it out - anyone point me in the right direction?
View 3 Replies
View Related
Mar 3, 2015
How to return only non matching left join records. Currently I am doing a traffic management database to learn sql.
I am checking for all parishes with no associated drivers. Currently I only have 2 of such.
The regular left join
select parish.name, driver.fname from parish left join driver on driver.parish=parish.name
Returns the all the names of the parishes and the first name of the associated drive, followed by the matches, however the two parishes with no matches have null for the first name.
View 1 Replies
View Related
Sep 21, 2006
I have a SELECT Statement that I am using that is pulling from two tables. There won't always be results in the second table so I made a LEFT OUTER JOIN. The problem I am having is that I need to have three conditions in there:WHERE (employee.emp_id = @emp_id) AND (request.requested_time_taken = 'FALSE') AND (request.request_end_date >= GETDATE()))The two conditions from the request table are causing the entire query to return NULL as the value. I need help trying get a value whether or not there are any results in the request table.Here is the full select statement:SELECT (SELECT SUM(ISNULL(request.request_duration, '0')) AS Expr1
FROM employee LEFT OUTER JOIN
request AS request ON employee.emp_id = request.emp_id
WHERE (employee.emp_id = @emp_id) AND (request.requested_time_taken = 'FALSE') AND (request.request_end_date >= GETDATE()))
AS dayspending
FROM employee AS employee_1 LEFT OUTER JOIN
request AS request_1 ON employee_1.emp_id = request_1.emp_id
WHERE (employee_1.emp_id = @emp_id)
GROUP BY employee_1.emp_id, employee_1.emp_begin_accrual, employee_1.emp_accrual_rate, employee_1.emp_fname, employee_1.emp_minitial,
employee_1.emp_lname
View 2 Replies
View Related
Jul 23, 2005
Hi,I'm am looking for a little help. I need to create a SQL view whichjoins a few tables, and I need to return an average for a particularcolumn where a second duplicate ID exists...Heres an example of how the results could be returned...ID | Name | Order No. | Value---+------+-----------+---------5 | test | 1234 | 35 | test2| 1234 | 45 | test3| 1234 | 35 | void | 1235 | 55 | void2| 1235 | 65 | void3| 1235 | 55 | void4| 1235 | 7ID is my main join which joins the tablesName is a unique nameOrder No is the same for the different names, I only need to return onerow with this order no, and the first name (the rest are irrelevant)Value is the field which I wish to return as an average of all 3, 4 orhowever many rows is returned and share the same order no. This iswhere I get totally lost as I am pretty new to SQL. Can anyone provideany help on how I would go about limiting this query to the uniqueorder no's and returning the average of the value field, and I can takeit from there with my own tables.Thanks for your helpstr8
View 3 Replies
View Related
Dec 31, 2007
Need some join help...
Table 1 - Modules:
ID | Name
1 | A
2 | B
3 | C
Table 2 - CompanyModules
ModuleID | CompanyID
1 | 1
2 | 1
3 | 1
1 | 2
I'd like to return the following result set:
CompanyModules.CompanyID | Modules.Name | Present
1 | A | True
1 | B | True
1 | C | True
2 | A | True
2 | B | False
2 | C | False
What would be the query for this? Thanks.
Edit: This is the query I have tried:
select CompanyModules.CompanyID, Modules.Name, count(Modules.ID) as Present from
CompanyModules RIGHT outer Join Modules on CompanyModules.ModuleID = Modules.ID
group By CompanyModules.CompanyID, Modules.Name
Order by CompanyID
However, it only returns a partial result set:
CompanyModules.CompanyID | Modules.Name | Present
1 | A | 1
1 | B | 1
1 | C | 1
2 | A | 1
View 1 Replies
View Related
Oct 29, 2007
I have SSRS 2005 SP2 configured to work in Sharepoint integration. Everything works fine except that I am not able to programmatically change any property of report viewer web part (instance) that I have added on on home page of my sharepoint site.
I can do same thing via sharepoint UI but not through program. When my programs runs it fetches all web parts been added on home page, then I need to iterate through each one and find report viewer web part.
While iterating, as soon as I arrive to report viewer web part it is named as "Error web part" with error message as
"Windows SharePoint Services cannot deserialize the Web Part. Check the format of the properties and try again"
If someone has a solution, please respond at your earlist.
Thanks
Shankar
View 1 Replies
View Related
Dec 7, 2007
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use
dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
View 3 Replies
View Related
Jan 28, 2015
I have made the following Scalar-valued function:
CREATE FUNCTION [dbo].[TimeCalc]
(
@OriginalTime AS INTEGER
, @TenthsOrHundredths AS INTEGER -- code 2: 1/10, code 4: 1/100
)
RETURNS NVARCHAR(8)
[Code] ....
What it does is convert numbers to times
E.g.: 81230 gets divided by 10 (times in seconds: 8123). This 1 1 full minute, and the remainder = 2123 making it 1.21.23 mins)
So far so good (function works perfectly)
My question: sometimes times are in 1/100 (like above sample), sometimes in 1/10.
This means that, e.g. with a time like 3.23.40 the last zero must be deleted.
My thoughts are to use the results from the Return Case part, and as the code = 4: leave it as it is,
is the code 2 the use LEFT(... result Return Case ..., Len(..result Return Case.. - 1))
There are 5 codes: 0 1 2 3 and 4
View 9 Replies
View Related
May 7, 2014
I think I am definitely thrashing and am not getting anywhere on something I think should be pretty simple to accomplish: I need to pull the total amounts for compartments with different products which are under the same manifest and the same document number conditionally based on if the document types are "Starting" or "Ending" but the values come from the "Adjust" records.
So here is the DDL, sample data, and the ideal return rows
CREATE TABLE #InvLogData
(
Id BIGINT, --is actually an identity column
Manifest_Id BIGINT,
Doc_Num BIGINT,
Doc_Type CHAR(1), -- S = Starting, E = Ending, A = Adjust
Compart_Id TINYINT,
[Code] ....
I have tried a combination of the below statements but I keep coming back to not being able to actually grab the correct rows.
SELECT DISTINCT(column X)
FROM #InvLogData
GROUP BY X
HAVING COUNT(DISTINCT X) > 1
One further minor problem: I need to make this a set-based solution. This table grows by a couple hundred thousand rows a week, a co-worker suggested using a <shudder/> cursor to do the work but it would never be performant.
View 9 Replies
View Related
Mar 28, 2008
I have a tabe in my sql server 2005 database which contains a long description and I want to display the first 100 charactors on my web page but not sure how to do this I can only display the whole description. I'm not sure if I need to write the query to the database so it only brings the first 100 charactors back or query the whole description and then take the first 100 charactors in asp.net and display that can any one help
View 3 Replies
View Related
Nov 20, 2012
I have a table with 2 columns ItemID and ReturnDesc. A sample of the data is:
ItemId ReturnDesc
1244 Did not want
1244 Wrong color
3426 Return came with ticket 426
3571 Ticket 584 was not included
The only information I want to have returned is the number following the text 'ticket'. How do I do this?
View 3 Replies
View Related
Feb 20, 2007
Hello,
Im currently working on a asp.net file hosting wesite, and im being faced with some problems
I currently have 4 sql tables. DownloadTable, MusicTable, ImageTable and VideoTable. Each of those tables contain a UserName column, a fileSize column and sme other columns. What i want to do is add up all the values in the fileSize column, for each table, and then add them up with the tables, and return one value, and all this happens where the UserName column corresponds to the UserName of the currently logged on User.
I already have an sql statement that performs this exact thing. It is as follow
select TotalDownLoadSize = sum(DownloadSize) + (select sum(VideoSize) from VideoTable where ([UserName] = @UserName ) ) + (select sum(ImageSize) from Images where ([UserName] = @UserName) ) + (select sum(MusicSize) from MusicTable where ([UserName] = @UserName) ) from DownloadTable where ([UserName] = @UserName)
But the problem is that all of the tables have to have a value in there size columns for the corresponding user, for this sql statement to return something.
For example, lets say i logged in as jon. If, for the UserName jon, the sum of DownloadTable returned 200, the sum of VideoTable returned 300, the sum of MusicTable returned 100. The sql statement i stated above will return 4 instead of 600, if the sum of ImageTable returned zero.
Is there way around this?
Im not sure if ive been cleared enough, please feel free to request more info as needed.
Thank you very much, and thx in advance.
View 5 Replies
View Related
Aug 22, 2006
I have a query that returns results based on information in several tables. The problem I am having is that is there are no records in the one table it doesn't return any information at all. This table may not have any information initially for the employees so I need to show results whether or not there is anything in this one table.
Here is my select statement:
SELECT employee.emp_id, DATEDIFF(mm, employee.emp_begin_accrual, GETDATE()) * employee.emp_accrual_rate -
(SELECT SUM(request_duration) AS daystaken
FROM request) AS daysleft, employee.emp_lname + ', ' + employee.emp_fname + ' ' + employee.emp_minitial + '.' AS emp_name,
department.department_name, location.location_name
FROM employee INNER JOIN
request AS request_1 ON employee.emp_id = request_1.emp_id INNER JOIN
department ON employee.emp_department = department.department_id INNER JOIN
location ON department.department_location = location.location_id
GROUP BY employee.emp_id, employee.emp_begin_accrual, employee.emp_accrual_rate, employee.emp_fname, employee.emp_minitial,
employee.emp_lname, department.department_name, location.location_name
ORDER BY location.location_name, department.department_name, employee.emp_lname
The section below is the part that may or may not contain information:
SELECT (SELECT SUM(request_duration) AS daystaken
FROM request) AS daysleft
So I need it to return results whether this sub query has results or not. Any help would be greatly appreciated!!!
TIA
View 3 Replies
View Related
Dec 18, 2006
Execute following T-SQL within Queary Analyzer of SQL Server 2000:=======================================DECLARE @dTest DATETIMESET @dTest='2001-1-1 1:1:1:991'SELECT @dTestSET @dTest='2001-1-1 1:1:1:997'SELECT @dTestSET @dTest='2001-1-1 1:1:1:999'SELECT @dTest=======================================You get what?This is my result which is weird:2001-01-01 01:01:01.9902001-01-01 01:01:01.9972001-01-01 01:01:02.000Then what's the reason of this weird problem?
View 3 Replies
View Related
May 18, 2007
I have worked with many data mining softwares and found SQL Data mining part of Microsoft product needs to imrove a lot to whoo the customers.
View 10 Replies
View Related
Apr 8, 2015
My company is migrating all their servers to a new data center and I get to specify what we need for the db servers.
We've got a 22 prod servers (mainly physical) with a couple of TB of data on sql 2000 to 2012.
We expect to move to sql2014, and consolidate and virtualise where ever possible.
But I'd like start with specifying an overall architecture for this: some Best Practices to guide the build at a server and an installation level
View 1 Replies
View Related
Feb 22, 2007
I have a number of tables, and I need to create a summary of the data.Now I have two choices. I could create a stored procedure that creates a temp table with the filters applied. This would require 12 selects for each year (we have 3 years of data so far). This means 36 selects so far that fill a temp table.The second choice is to create a table with the required columns and rows. As I am esspecially cross-joining 4 tables, the table would have about 10 x 10 x 12 x A rows, where A is a variable that will grow quickly. I can then keep this table up-to-date using triggers for each insert. Then all I need to do is use an aggregate funtion on the relevant filter.My question is, which is more efficient. Creating a stored procedure that creates the table dynamically, or have a table with thousands of rows and using an aggregate function on these.PS I am using SQL Server 2000Jag
View 1 Replies
View Related
Jun 25, 2007
say i have some columns and a person can vote either once, twice or 3 times ( checkbox style control ) and in the database it looks something like this: eg: ID.... vote1..... vote2.... vote3 1 0 0 1 2 1 0 1for ID = 2, what type of query would i have to write to return the column names vote1 & vote3 ( vote2 is not null ) Cheers!!!
View 1 Replies
View Related
Oct 21, 2007
Hi! I have a sql query in stored procedure: SELECT Salutation + ' ' + FirstName + ' ' + LastName AS fullname
Ok, this returns a value if salutation is not null, but if the salutation is null it doesn't return any value, I was thinking if the saluation is null then I would atleast get the firstname and last name. Any help appreciated on this.
View 4 Replies
View Related
Apr 12, 2004
SELECT @@TEXTSIZE
SET TEXTSIZE 4096
SELECT @@TEXTSIZE
GO
DECLARE @ptrval varbinary(16)
SELECT @ptrval = TEXTPTR(emailTemplates.Data)
FROM emailTemplates WHERE [Name] = 'AccountInfoReceipt1'
READTEXT emailTemplates.Data @ptrval 0 2000
GO
Thats my code. and it never returns the entire email template. why?
thx in adv
View 2 Replies
View Related
Apr 2, 2006
I have a stored procedure (in SQL Server 2005 Express) that returns a string. The problem is when I call it from my web page I get only the first character of the string. This is my SP:
ALTER PROCEDURE dbo.usp_CalcDeliveryCharge
@mintDistance int,
@mintCustomer_ID int = 0,
@mintRate int = 0 OUTPUT,
@mstrZone nchar(10) = null OUTPUT
AS
/* SET NOCOUNT ON */
SELECT @mintRate=RATE,
@mstrZone=ZONE
FROM tblRates
WHERE Customer_ID=@mintCustomer_ID
AND Mile_Range_Min <= @mintDistance
AND Mile_Range_Max >= @mintDistance
And this is my code:
sql_Command.CommandText = "usp_CalcDeliveryCharge"
sql_Command.CommandType = CommandType.StoredProcedure
sql_Command.Parameters.Clear()
sql_Command.Parameters.AddWithValue("@mintDistance", intApproxMiles)
sql_Command.Parameters.AddWithValue("@mintCustomer_ID", Profile.CompanyID)
sql_Conn.Open()
sql_Reader = sql_Command.ExecuteReader()
While (sql_Reader.Read())
Me.lblZone.Text = sql_Reader.Item(0).ToString
End While
sql_Conn.Close()
sql_Reader.Close()
sql_Command.Dispose()
View 1 Replies
View Related
Apr 17, 2008
I have two databases with table structures exactly the same. The query in one database works and returns correctly. The same query (copied and pasted) in another database returns the correct records but completely ignores the order by. Even stranger, when you are creating the query under modify and run it, it is fine. But when I right-click on the query and go to 'Open View' then the query does not return correctly. Below is the query:
SELECT TOP (100) PERCENT pf.description AS incentive, CAST(i.targetc AS FLOAT) AS targetc, i.targetp, b.basis, d.description, i.iSelect, i.direction, pf.pValue,
pf.pFigure
FROM dbo.PerfFactorWeights AS pfw INNER JOIN
dbo.PerfFactors AS pf ON pfw.incentiveID = pf.incentiveID INNER JOIN
dbo.Incentive AS i ON pfw.incentiveID = i.incentiveID AND pfw.basis = i.basisID INNER JOIN
dbo.Basis AS b ON i.basisID = b.basisID INNER JOIN
dbo.Division AS d ON pfw.division = d.uniqueID
ORDER BY incentive, d.uniqueID, b.basis
View 4 Replies
View Related
May 29, 2008
Hello everyone,
I set up a View in SQL Server 2005. The syntax checks ok, however, when I execute it, it doesn't return any data.
This is my Query:
SELECT DATEPART(hh, Time) AS Time, COUNT([Recipient-Address]) AS [CountOfRecipient-Address], ROUND(SUM([Total-bytes]) / 1048576, 2)
AS [SumOfTotal-Bytes]
FROM dbo.TrackingLog
WHERE (RIGHT([Recipient-Address], LEN([Recipient-Address]) - PATINDEX([Recipient-Address], '@')) IN
(SELECT Domains
FROM dbo.Domains))
GROUP BY DATEPART(hh, Time)
The part that I am most concerned about is the WHERE section. If I remove it, I get some data returned. If I don't, obviously I don't get anything back.
Any suggestion would be great.
Thanks
View 4 Replies
View Related
Apr 9, 2007
I'm having trouble with the display of data when I test my asp page. I basically retrieves or pulls data from different tables in a database. Based on an ID number (which I can change manually by typing in a value and appending it to the URL), it shows GuestName, GuestDescription and URL as text link. I can get it to do that much. But for some reason it's not showing the URL associated with the Guest Name. I dont think it's the display section of my code. I think it's the Select statement.
Here is what the output looks like in my Firefox and IE browsers when I test. Some data has been changed to protect it's integrity:
(Name in bold) Mark Crisp's author of The Bush Lexicon. His new book...
Related Links:
John Doe interviewed by Susan Smith, 123 News
What it should say in the link is this: Mark Crisp's blog (as text link)
When I test for different data I just change the end of the URL like this:
defaultprogram4.asp?ID=1234 (this number represents an ID column in a table)
Code Snippet
<%
set con = Server.CreateObject("ADODB.Connection")
con.Open "File Name=E:webserviceCompanyCompany.UDL"
set rs = Server.CreateObject("ADODB.Recordset")
id=request.querystring("id") 'If this line is commented out the page will be blank.
'However you can still append a record number to the end of the URL and display that one.
IF id <> "" then id=id else id="1234" end if 'This line shows the default record of 1234. If this line is commented out the page will ONLY show the default record but will NOT allow you
'to append a different number
strSQL = "SELECT *, T_Programs.ID AS Expr1, T_ProgramGuests.ProgramID AS Expr2, T_ProgramGuests.GuestName AS Expr3, T_ProgramGuests.GuestDescription AS Expr4, T_ProgramLinks.URL AS Expr5, T_ProgramLinks.Description AS Expr6 FROM T_ProgramGuests CROSS JOIN T_Programs CROSS JOIN T_ProgramLinks WHERE (T_ProgramGuests.ProgramID = '" & id & "')"
rs.Open strSQL,con 'open a connection to the database
%>
<br />
<strong><% Response.Write RS ("GuestName") %> </strong> <% Response.Write RS("GuestDescription") %><br /><br />
Related Links:<br />
<li class='basic'><A HREF="<%= RS("URL") %>"><%= RS("Description") %></A></li>
<!-- END OF THE GUESTS AND LINKS SECTION -->
<%
recProgram.Close
con.Close
set recProgram = nothing
set con = nothing
%>
Bottom line here is this: Why would I be seeing one name but a link not associated with that name? It's as though it's reading a name from the ProgramGuests table and a URL from the
ProgramLinks table (Except that: it shows a completely different unrelated URL to that name).
What am I missing?
View 1 Replies
View Related
