I have a 64 bit Itanium SQL Cluster that I'm trying to set up. The database engine seems fine, but I'm trying to install some SSIS packages using dtUtil and I keep getting a connection error. The error is as follows
"Login timeout expired
An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default seetings SQL Server does not allow remote connections.
Named Pipes Provider: Could not open a connection to SQL Server [2}. (Microsoft SQL Native Client)"
Also, in Management studio, I can make a connection to my SSIS Server, but when I go down to the MSDB folder to look at packages I get the same connection error.
I think I was able to deploy a package using the Deployment Manifest created by VS, but I'm not sure because I can't see the package in Mgt Studio.
It almost seems like it may be related to the cluster. I'm connected in to one of the Servers using Terminal Services. But I am trying to connect to the Cluster name in Mgt Studio.
I have inherited two separate SQL clusters. One cluster instance is called DESQLSC1INST1 and the other is MKSQLSC1INST1.
On MKSQLSC1INST1 I can connect by using MKSQLSC1INST1, MKSQLSC1 and the IP address that the cluster is running on. On DESQLSC1INST1 I can only connect using DESQLSC1INST1.
I have checked configuration manager but it does not show me how this is set up.
I am trying to remotely connect to a SQL 2005 Instance on a cluster. I see the following error:
No retry on exception System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have enabled TCP/IP , Named Pipes on the node. I have turned off IPSec on the clients as well. I am using the following connection string : "Integrated Security=SSPI;server=servernameinstancename;Pooling=false;database=TrialDB"
I am using a script to copy a number of packages (50+) from my desktop computer (file system) to a remote server (MSDB). The script works fine, but I can never get through the entire script without it hanging up. Some times only 3-4 packages get copied, sometimes a lot more. If I close the windows cmd window and restart at the point it hung, it continues, but usually hangs up again. If you repeat this 2 or 3 times, it eventually gets all of the packages copied. It does not always hang at the same point. I have tried doing the copies with "quiet" mode - overwriting the existing packages and I have tried first deleting the packages, then copying - doesn't make a difference. I have also tried moving the packages to a couple of different installations of SQL Server 2005 using the script - the remote one and the local one on my desktop - same thing on both.
If I have the script echo a message just after each copy, the message just after the last successful copy never appears (and I know the copy is successful, because I deleted all the packages first and have checked that the package is there after the script hangs).
i have to check whether SSIS package is present in MSDB or not.
I am using DTUTIL for this perpose . Command goes like this.
dtutil /SQL Package_for_testing /Exists
Error(0xC0014014) while checking for the existence of package "Package_for_testing" on SQL server
this is giving the error "The specified package does not exist. Description: The ExistsOnSQLServer method has encountered OLE DB error code 0x80 004005 (Login timeout expired). The SQL statement issued has failed. Source:"
But the package is there in MSDB when i checked manually.
I want to know what this error signify? and how i can solve it. With advance thanks Srinivasa Mahendrakar
I am trying to deploy a package to a project in my SSIS catalog and am using the following command:
dtutil /FILE C:ChangesReceivedEDI.dtsx /DestS MARSQL12 /COPY DTS;TradingPartnersTradingPartnerReceivedEDI Where the TradingPartners is the folder name, the TradingPartner is the project name and the ReceivedEDI is the package name.
I am getting an error of:
Error (0x800706BA) while checking for the existence of package "TradingPartners TradingPartnerReceivedEDI" in the SSIS package store. Error (0x800706BA) saving package "TradingPartnersTradingPartnerReceivedEDI" to the SSIS package store.
I'm wondering how to use the dtUtil command to deploy an ssis package but also include any of the miscellaneous files, such as some dtsconfig files. I'd like to be able to use the dtUtil command to specify where to put any "dependencies" that I have. If I create a deployment utility from BI Studio, I have the option on the third screen to choose the folder for dependencies, how come I don't see any parameters for that on the dtUtil command? Is it possible, or do I HAVE to deploy using the deployment utility created for me by BI Studio?
1) We are migrating data from SQL Server 2000 to 2005 DB.
2) We are developing SSIS packages in client, build, deploy and install and copying to SQL Server 2005 server to execute for migration.
3) For this we encrypt all packages with password, then decrypt all while executing in a batch file using dtexec. This works fine.
4) What does not work is executing a master execute task in which are individual execute tasks. This is so since the other packages are still encrypted.
5) We decrypted them separately first using dtutil using Decrypt and Copy/Move option but while executing error is thrown that these other packages are still protected by password.
6) Do we need to decrypt, then encrypt using default package protection level and then decrypt again.
7) How exactly to just execute a master package when packages are developed on client.
SQL 2012 - Convert BIDS project and DTUTIL cannot load the package I just converted a really simple 2008 BIDS project to 2012 and 2012 dtutil will not load it. Tried 32 bit and 64 bit dtutil.
Get the following error message.
'count not load package "c: empSSISPackage.dtsx" because of error 0x80131534. Description: the package failed to load due to error 0x80131534 "<null>". This occurs when CPackage::LoadfromXML fails.
I can Import the package in SQL Manager, and I can deploy it using the manifest and the deployment wizard. But DTUTIL chokes on it. It is the dtsx right from 2012 Bids build.
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2 Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid. Msg 3156, Level 16, State 50, Line 2 File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file. Msg 3119, Level 16, State 1, Line 2 Problems were identified while planning for the RESTORE statement. Previous messages provide details. Msg 3013, Level 16, State 1, Line 2 RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512), @sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX), @column NVARCHAR(MAX); DECLARE @indexname NVARCHAR(512); SELECT name As 'Table'
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical) 2. MSDTC 3. SQL Server 4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
We have many tables which have cluster index on column with datatype 'Char(200)'. Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
We have (had) an active/active cluster. 2 physical machines, each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously, we could backup everything and completely destroy Ins2 and recreate it on Node2 then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2 over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official documentation, that would be great too.
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
I designed the AlwaysOn wrong, but every time we fail over from primary server to another server, my applications cannot connect because the sql logins cannot connect to their default databases. Once I run the command to link the login with the user in the default database then the users are able to connect. Did I do something wrong when designing AlwaysOn?
I try to import my SSIS packages which are created using the Business Intelligent studio into SQL server 2005 but I cannot do that.
I am running SQL server 2005 enterprise edition.
Also when i tried to connect to Integration services using Object explorer, it only prompt me for server name. I cannot change the username and password which is disabled.
Then how am i supposed to connect to Integration services on a server in this case?
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
