64-bit Error: Numeric Arithmetic Causes Truncation.
Dec 19, 2007
An SSIS package has worked fine for a long time in 32-bit SQL Server. It now fails in 64-bit SQL Server. I run this same package in my dev environment against the same data and it works, but my dev environment is 32-bit
System.Data.SqlTypes.SqlTruncateException: Numeric arithmetic causes truncation.
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PrimeOutput(Int32 outputs, Int32[] outputIDs, PipelineBuffer[] buffers)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPrimeOutput(IDTSManagedComponentWrapper90 wrapper, Int32 outputs, Int32[] outputIDs, IDTSBuffer90[] buffers, IntPtr ppBufferWirePacket)
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Parse Into DataSet" (5196) returned error code 0x80131932. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Any suggestions?
View 8 Replies
ADVERTISEMENT
Jun 10, 2014
when I run below query I got Error of Arithmetic overflow error converting numeric to data type numeric
declare @a numeric(16,4)
set @a=99362600999900.0000
The 99362600999900 value before numeric is 14 and variable that i declared is of 16 length. Then why this error is coming ? When I set Length 18 then error removed.
View 2 Replies
View Related
Mar 21, 2006
Guys
I'm getting the above when trying to populate a variable. The values in question are :
@N = 21
@SumXY = -1303765191530058.2251000000
@SumXSumY = -5338556963168643.7875000000
When I run, SELECT (@N * @SumXY) - (@SumXSumY * @SumXSumY) in QA I get the result OK which is -28500190448996439680147097583285.072256 ie 32 places to left of decimal and 6 to the right
When I try the following ie to populate a variable with that value I get the error -
SELECT R2Top = (@N * @SumXY) - (@SumXSumY * @SumXSumY)@R2Top is NUMERIC (38, 10)
Any ideas ??
View 6 Replies
View Related
Jan 13, 2015
The following function is throwing the error:
1) "Arithmetic overflow error converting numeric to data type numeric."
2) The variable @x should only be set when if condition is equal to 1. For any other values, it should not go inside if condition. Does the following if condition code meet that criteria?
ALTER FUNCTION [dbo].[fn_Calculator]
(
@abc bit
)
returns decimal(14,10)
as begin
[code]...
View 3 Replies
View Related
Sep 4, 2012
This is the error in my query:
[Err] 22003 - [SQL Server] Arithmetic overflow error converting numeric to data type numeric.
If tried [%TAX] DECIMAL (10, 2) I have the correct output, but I need 4 decimal in my output.
Code:
MATNUMB-VER-EXENUMB-VER-RIC%TAX
a476427228.1515,17%
b9241314323.1515,50%
c7781510878.1413,98%
d7480019601.2626,20%
e877618297.099,45%
[Code] .....
View 2 Replies
View Related
Jul 23, 2005
I've a SQL view performing a number of very precise calculations ie.495/(1.112 - (.00043499*((Col1 + Col2 + Col3))) + ( .00000055 * ((Col1+ Col2 + Col3)) * ((Col1 + Col2 + Col3))) - (.00028826 * Col4))) -450)/100Obviously this sometimes causes a precision issues because the floatand real datatypes don't hold precise values... My problem is thatconverting to the numeric or decimal datatype easily produces an errorif the precision is not big enough to hold the resulting output... Sohere's my questions:Does anyone see a problem with me maxing out the precision of thedecimal datatype (ie. use DECIMAL(38,8) across a couple dozeninter-related formulas?So the above code would now exec like this:495/(CONVERT(DECIMAL(38,8),1.112) -(CONVERT(DECIMAL(38,8),.00043499)*((Col1 + Col2 + Col3))) +(CONVERT(DECIMAL(38,8),.00000055) * ((Col1 + Col2 + Col3)) * ((Col1 +Col2 + Col3))) - (CONVERT(DECIMAL(38,8),.00028826) * Col4))) - 450)/100If anyone does see a problem with this approach, could you suggestanother alternative?
View 1 Replies
View Related
Oct 13, 2012
When I run the following sql query:
"update table set price = price * 1.1 "..
I get the following error : "Msg 8115, Level 16, State 8, Line 1.. Arithmetic overflow error converting nvarchar to data type numeric. The statement has been terminated."
The table is set to nvarchar, and i am just trying to make the prices go up 10%.
View 9 Replies
View Related
Oct 30, 2014
OK, so I have this query where I'm trying to subtract values like this, when I do this I am getting (Arithmetic overflow error converting varchar to data type numeric.) I have tried many different things, and now of these work, it'll either return 0 because it loses the .XXXXX.
Convert(DECIMAL(10,7),CAST([TIME_OF_COMPLETION] as DECIMAL(10,7)) - Convert(DECIMAL(10,7),CAST([OPR_DELIVERED_TIME] as DECIMAL(10,7)) round(cast(cast(hist.[TIME_OF_COMPLETION] AS float) as DECIMAL(15, 5)) - CAST(hist.[OPR_DELIVERED_TIME] AS FLOAT),1 SELECT convert(FLOAT,CAST('735509.00053' AS DECIMAL(10,5))) - convert(FLOAT,CAST('735509.00047' AS DECIMAL(10,5)))
View 1 Replies
View Related
Apr 3, 2014
I am trying to setup an indicator value for an SSRS report to show green and red values on a report, based on the NRESULT value. The problem I am facing is that I have several different CASE statements that have the same logic, and they are processing just fine. NRESULT is a decimal field, so no conversion should be necessary. I do not know why I am getting the "Arithmetic overflow error converting varchar to data type numeric." error message.
Below is the CASE statement where the error is occurring. It is in the part of the ELSE CASE. The first CASE works just fine when the ELSE CASE is commented out. If I also change the ELSE CASE statement to say "else case when LEFT(NRESULT,1) = '-' then '0'", then it processes fine, too, so it has to be something I am missing something in the check on negative values. I do need the two checks, one for positive and one for negative values, to take place.
case when LEFT(NRESULT,1) <> '-' then --This portion, for checking positive values, of the CASE statement works fine.
CASE WHEN LEFT(ROUND(NRESULT,2),4) between 0.00 and 0.49 THEN '2' --Green
ELSE CASE WHEN LEFT(ROUND(NRESULT,2),4) > 0.49 THEN '0' --Red
ELSE '3' --White
END
END
else case when LEFT(NRESULT,1) = '-' then --This portion, for checking negative values, of the CASE statement is producing the conversion error message.
[code]....
I checked the NRESULT field, and there are not any NULL values in there, either.
View 1 Replies
View Related
Jun 27, 2007
Hi,
I have a data file that has numeric data that looks like:
1.123456
And this column is defined as a DT_NUMERIC(18.6) in the flat file conn mgr.
As an experiment, I changed the destination column to a NUMERIC(18,0) - hoping that this would throw a truncation error at the flat file task level (where I have Truncation on all columns set to "fail component").
Not a peep. It loaded the data into the table, chopping off the 6 digits after the decimal point.
You would THINK that this would cause an error, but no. Why is this? The flat file task complains about all kinds of things, but this is such a gross error, you would think it would catch it!
Thanks
View 5 Replies
View Related
Mar 22, 2007
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
View 3 Replies
View Related
Feb 16, 2008
hi, can someone please tell me what this error is, i am trying to create a quiz engine but i keep getting this error when i try to save the results of me quiz in the results page. i have been following the tutorial from this website. Please can someone help me, thanks
Arithmetic overflow error converting expression to data type smalldatetime.The statement has been terminated.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Arithmetic overflow error converting expression to data type smalldatetime.The statement has been terminated.Source Error:
Line 46: userQuizDataSource.InsertParameters.Add("UserName", User.Identity.Name)
Line 47:
Line 48: Dim rowsAffected As Integer = userQuizDataSource.Insert()
Line 49: If rowsAffected = 0 Then
Line 50: ' Let's just notify that the insertion didn't
View 8 Replies
View Related
Jul 21, 2004
I got the following error when running a SP:
Server: Msg 8115, Level 16, State 6, Line 1
Arithmetic overflow error converting nvarchar to data type numeric.
The statement has been terminated.
The stupid thing is, that there is no data conversion at all. It's an insert into SLQ server table where data is retrieved from an Oracle View (using ADO DB link). I got 4 other SP's, doing the same thing for resp 4 other tables, which works fine. Those :mad: SP won't work. I don't know why. Below I put the table structure, view structure and SP I used:
Table:
Contract_No varchar (20) NOT NULL
Registration_Date_Time datetime NOT NULL
AGC varchar (4) NOT NULL
Salesgroup varchar (4) NOT NULL
Group_ varchar (8) NOT NULL
Activity_Type varchar (4) NULL
Type char (1) NULL
Group_Description varchar (50) NULL
Stock_Um varchar (4) NULL
B_Qty numeric(11, 4) NULL
B_Cost numeric(23, 4) NULL
C_Qty numeric(11, 4) NULL
C_Cost numeric(24, 4) NULL
D_Qty numeric(11, 4) NULL
D_Cost numeric(24, 4) NULL
Oracele view:
CONTRACT_NO VARCHAR2(20)
AGC VARCHAR2(4)
SALESGROUP VARCHAR2(4)
GROUP_ VARCHAR2(8)
ACTIVITY_TYPE VARCHAR2(4)
TYPE CHAR(1)
GROUP_DESCRIPTION VARCHAR2(50)
STOCK_UM VARCHAR2(4)
B_QTY NUMBER
B_COST NUMBER
C_QTY NUMBER
C_COST NUMBER
D_QTY NUMBER
D_COST NUMBER
Stored procedure:
CREATE PROCEDURE mis_Upload_Contract_Kosten
@strType varchar(10),
@strDate varchar(19)
AS
declare @strInsert as varchar(1000);
declare @strSelect as varchar(1000);
declare @strWhere as varchar(1000);
declare @strSql as varchar(3019);
SET @strWhere = ''
SET @strInsert = 'INSERT C_Contract_Kosten (
Contract_No
, AGC
, Salesgroup
, Group_
, Activity_Type
, Type
, Group_Description
, Stock_Um
, B_Qty
, B_Cost
, C_Qty
, C_Cost
, D_Qty
, D_Cost
, Registration_Date_Time)'
SET @strSelect = ' SELECT gLCK.Contract_No
, gLCK.AGC
, gLCK.Salesgroup
, gLCK.Group_
, gLCK.Activity_Type
, gLCK.Type
, gLCK.Group_Description
, gLCK.Stock_Um
, gLCK.B_Qty
, gLCK.B_Cost
, gLCK.C_Qty
, gLCK.C_Cost
, gLCK.D_Qty
, gLCK.D_Cost
, ' + char(39) + @strDate + char(39) + '
FROM Glovia..LIVE.C_CONTRACT_KOSTEN as gLCK
WHERE gLCK.Contract_No NOT LIKE '' IND*''
AND NOT EXISTS
( SELECT vCC.Contract_No
FROM V_Contracts_Closed as vCC
WHERE vCC.Contract_No = gLCK.Contract_No)
AND EXISTS
( SELECT cc.Contract_No
FROM C_Contracten as cc
WHERE cc.Registration_Date_Time = ' + char(39) + @strDate + char(39) + '
AND cc.Contract_No = gLCK.Contract_No)'
IF @strType = 'closed'
BEGIN
SET @strWhere = ' AND NOT(gLCK.Contract_Close_Date IS NULL)'
END
IF @strType = 'open'
BEGIN
SET @strWhere = ' AND gLCK.Contract_Close_Date IS NULL'
END
SET @strSql = @strInsert + @strSelect + @strWhere
EXEC (@strSql)
GO
View 1 Replies
View Related
Jun 13, 2008
I am trying to run this query:
SELECT 'D', property.parcel_number, ROUND(.23 + property_char.value * .02731, 2) AS nwcharge
FROM
property INNER JOIN
property_char ON property.id = property_char.property_id INNER JOIN property_char AS pc ON property.id = pc.property_id INNER JOIN
prop_valuation ON property.id = prop_valuation.property_id INNER JOIN
val_component ON property.id = val_component.property_id INNER JOIN
val_component AS vc ON property.id = vc.property_id
but I am getting the error:
"Arithmetic overflow error converting varchar to data type numeric".
It seems to be cause by the line: ROUND(.23 + property_char.value * .02731, 2) AS nwcharge.
Please help.
Thanks
View 5 Replies
View Related
Sep 18, 2006
i have an sql query that goes like this:
select CategoryID & power(2,x) from CategoryDetails
where CategoryID can range upto 15 digits eg: 137652435487090
x is the result of a formulae and can range upto 2 digits eg:95
CategoryID is the current category ID.
Number resulting from the formulae is the subcategory ID of the current categoryID.
I am getting error Arithmetic overflow error for datatype bigint.
what datatype shd I use to resolve the error or is there any way out.
View 9 Replies
View Related
Mar 27, 2008
Dear gurus
I want to have this query for some calculation
SELECT DATEADD(day, 1, CONVERT(datetime, @ddate, 101)) AS Expr1
@ddate is a parameter which will be passed during runtime.
when i try this is in the query window i get arithmetic overflow error
Thanks and Regards
Arun
View 5 Replies
View Related
Jan 7, 2008
Hi,
Below query failed which executing in sql 2005 64Bit and large memory
select count(*) AS Buffered_Page_Count
,count(*) * 8192 / (1024 * 1024) as Buffer_Pool_MB
from sys.dm_os_buffer_descriptors
Msg 8115, Level 16, State 2, Line 4
Arithmetic overflow error converting expression to data type int.
but it work fine in my test server which running 2GB of ram with sql 2005
View 7 Replies
View Related
Oct 18, 2007
I get an arithmetic overflow error when trying to insert DateTime.Now() as a SmallDateTime. When I set up my table definition I entered SmallDateTime and the program automatically allowed a length of 4. Any suggestions?
View 6 Replies
View Related
Feb 7, 2000
I have two tables which have dates in varchar fields on both. I have to
join them to get the data . I wrote the following syntax in where clause. In
one of the fields includes time and the other does not. But the thing is, I
got the Arithmetic overflow occurred error message after '01/01/2000'. Isn't
it strange?
convert(varchar(30),convert(datetime,R.request_dat e),101)=convert(varchar(30
),convert(datetime,B.request_date),101)
View 2 Replies
View Related
May 7, 2008
I am gettin this Error, from my SQL query below, what am I missing:
Arithmetic overflow error converting numeric to data type numeric
Code:
SELECT FullUrl AS SiteUrl, CAST(CAST(CAST(DiskUsed AS decimal(10, 2)) / 1024 AS decimal(10, 2)) / 1024 AS Decimal(10, 2)) AS 'Total Size in MB'
FROM Sites
WHERE (FullUrl LIKE '%sites%') AND (FullUrl <> 'MySite') AND (FullUrl <> 'personal')
View 4 Replies
View Related
Sep 16, 2006
i have to calculate
power(2,32) in SQL Server Enterprise Manager.
here 32 is obtained through a series of calculations. no problem there. Error is in calculating power.
I am getting the foll error
Arithmetic overflow error for type int value = 4294927696.00000000
i tried convert(bigint,power(2,32)) but no use since conversion will anyway take place only after power is calculated which again gives the same error.
View 3 Replies
View Related
Jun 11, 2007
Hi all
Today I'm so incredibly annoyed.
I have a simple Table which has one Identity column plus an integer Column with Unique constraint and some varchar fields.When i change the value of that Unique Constraint Column , the value will change successfully But today i find a record (Just By Chance) that when i change the value of its filed i recieve the following Error: its filed has the value of 2519 and i wanted to update it to 2520 !!!
---------------------------
SQL Server Enterprise Manager
---------------------------
[Microsoft][ODBC SQL Server Driver][SQL Server]Arithmetic overflow error for type int, value = 6262227669.000000.
[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.
---------------------------
OK Help
---------------------------
As i said earlier i have no problem with other records , that's strange.
Could anyone help me Please?
Thanks in advance.
Kind Regards.
View 5 Replies
View Related
Apr 19, 2008
We are getting an Arithmetic Overflow Error - 8115
The error is thrown when a formula is getting calculated through the sql query
create table #temp
(
A decimal(21,4),
B decimal(21,4),
C decimal(21,4)
)
Insert into #temp
values( 171577.3139, 3376774.0000,3760846.0000)
select (A)/(0.8770/(B/C)) from
(select avg(A) as A, avg(B) as B, avg(C) as C from #temp) a
On execution of the select statement the following error message is thrown.
Server: Msg 8115, Level 16, State 2, Line 1
Arithmetic overflow error converting expression to data type numeric.
Can any one help us with a resolution.
Note: This select is part of our stored procedure.This formula is dynamically generated in our code.
We will not in a position to use cast function. We tried trace flag (107) option also. But we dont know how to set it permanently. It is effective only in the respective session. When the stored procedure is called from the application, the trace flag option does not work.
View 4 Replies
View Related
Aug 30, 2007
Hello Everyone and thanks for your help in advance. I am working on importing a flat text file into SQL Server 2005 and am having problems. The flat file is a CSV text file with " being used as a text qualifier. Each line is broken by a CrLf combination. When I try importing this file into a SQL Server 2000 table using the same datatypes and sizes for each column, it works perfectly fine with the data importing as expected. However, in SQL Server 2005, again using the identical column datatypes and sizes, the import fails giving me warnings such as:
* Warning 0x802092a7: Data Flow Task: Truncation may occur due to inserting data from data flow column "Column 0" with a length of 50 to database column "MLS_ID" with a length of 10. (SQL Server Import and Export Wizard)
Virtually every columns gives this type of warning, yet I don't understand why since the columns are all variable in length (every message says a column length of 50) and all are delimited rather than fixed size. Then later in the import, errors occur something like:
* Error 0xc02020a1: Data Flow Task: Data conversion failed. The data conversion for column "Column 15" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.". (SQL Server Import and Export Wizard) * Error 0xc020902a: Data Flow Task: The "output column "Column 15" (70)" failed because truncation occurred, and the truncation row disposition on "output column "Column 15" (70)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component. (SQL Server Import and Export Wizard)
I haven't got a clue as to why this is happening. For the record, on the flat file source screen, I have ensured that delimited has been selected rather than fixed width. Any help on this issue owuld be greatly appreciated. Thanks.
View 5 Replies
View Related
Jan 3, 2008
All,
I am having a strange problem that I have been looking at for a day now, and my head is straing to hurt as I have banged my head on the desk so many times. I have written an extensible set of classes that allow me to build SSIS packages dynamically via a web front end. I am finding this code is working OK, but I have this silly bug.
The code is trying to generate an SSIS package that does somethign very simple, and transfer data from a 10 coumn table with a mix of data types, move through another component that adds a couple of extra columns on basic on some variables, then map it onto a OLD DB destination. This code works fine, until I start using strings of various lengths.
When the package runs, it fails validation with errors saying that truncation may occur as I am trying to put a 100 character string, into a 50 character string. The error is logical as you wouldn';t want to do that, but this is not what I am doing. I am actually transfering data from a 50 character string into a 100 character string. When I try it with a table where the strings are the same length at both ends, or no strings are involved, everything works fine, and the data goes from the source to the destination.
I must be setting something slightly wrong which only triggers this problem when the sizes don't match, but the data flow direction is fine, and the data types match. I have included the code from the piece of code that 'writes' the output part of the package. If anyone has any idea what might be going wrong, I would be forever in their debt!
Code Block
private void ConfigureInputColumns(Package package, MainPipe pipe, IDTSOutput90 SourceColumnCollection)
{
_InstanceOfDestination.AcquireConnections(null);
_InstanceOfDestination.ReinitializeMetaData();
IDTSPath90 path = pipe.PathCollection.New();
path.AttachPathAndPropagateNotifications(SourceColumnCollection,_Destination.InputCollection[0]);
IDTSInput90 input = _Destination.InputCollection[0];
IDTSVirtualInput90 vInput = input.GetVirtualInput();
int iIndex = 0;
foreach (IDTSVirtualInputColumn90 vColumn in vInput.VirtualInputColumnCollection)
{
// Call the SetUsageType method of the destination
// to add each available virtual input column as an input column.
_InstanceOfDestination.SetUsageType(input.ID, vInput, vColumn.LineageID, DTSUsageType.UT_READWRITE);
}
IDTSExternalMetadataColumn90 exInputColumn;
foreach (IDTSInputColumn90 inColumn in _Destination.InputCollection[0].InputColumnCollection)
{
// create the MAP
// What we need to do here, is say what source column, goes to what destination column.
// we read by index, and we need to map the specifics, we could control just 3 of 20 columns
// to whatever column we wanted in the destination......
// We know the name of the inColumn - It is called inColumn.Name, we need to find the column
// we want to map with by finding its name.
if (inColumn.Name == "BatchID" || inColumn.Name == "ValidationStatus")
{
exInputColumn = _Destination.InputCollection[0].ExternalMetadataColumnCollection[inColumn.Name];
// map it
_InstanceOfDestination.MapInputColumn(_Destination.InputCollection[0].ID, inColumn.ID, exInputColumn.ID);
}
else if (Mapping.Map.ContainsKey(inColumn.Name))
{
exInputColumn = _Destination.InputCollection[0].ExternalMetadataColumnCollection[Mapping.Map[inColumn.Name]]; // inColumn.Name
// map it
_InstanceOfDestination.MapInputColumn(_Destination.InputCollection[0].ID, inColumn.ID, exInputColumn.ID);
}
}
_InstanceOfDestination.ReleaseConnections();
}
View 7 Replies
View Related
Feb 14, 2008
I am trying to write a SSIS package to move data from an access database table to a SQL db table.
I have a field which has data that too long for NVARCHAR(255), so, I end upin this error:
"A truncation error occurred on the specified object of the specified component"
Any work around?????
View 21 Replies
View Related
Jun 6, 2008
Why can't I multiply a bit variable that is set to TRUE (1) with a value larger than 0 but smaller than 1 without getting an "Arithmetic overflow error"? I have solved the problem by declaring my bits as smallints when I fetch them from the database into a stored procedure and use them in calculations, but I still would like to know why it doesn't work. I'm using SQL Server 2005. DECLARE @bit AS bitSET @bit = 0SELECT 0.1 * @bit -- Gives 0 as expected
SET @bit = 1SELECT 1.1 * @bit -- Gives 1.10 as expected
SELECT 0 * @bit -- Gives 0 as expected
SELECT 0.1 * @bit -- Gives "Arithmetic overflow error converting tinyint to data type numeric."
View 2 Replies
View Related
Jul 19, 2006
Hey everyone,
I have two tables, one is a large table (v_userviews) containing a list of all the servers and various information about those servers. The other table (l_printers) contains printer information for those servers. I am working on a view to consolidate the printer information in l_printers with the other server information in v_userviews.
I've been trying to get outer joins to work but I am getting this error:
"Server: Msg 8115, Level 16, State 2, Line 2
Arithmetic overflow error converting expression to data type int.
Warning: Null value is eliminated by an aggregate or other SET operation."
Here is my select statement:
select u.propid, u.address,
SUM((CASE u.Tree WHEN 'tree1' then 1 ELSE 0 END)) AS One,
SUM((CASE u.Tree WHEN 'tree2' then 1 ELSE 0 END)) AS Two,
SUM((CASE u.Tree WHEN 'tree3' then 1 ELSE 0 END)) AS Three,
SUM((CASE u.Tree WHEN 'tree4' then 1 ELSE 0 END)) AS Four,
SUM((CASE u.Tree WHEN 'tree5' then 1 ELSE 0 END)) AS Five,
SUM((CASE u.Tree WHEN 'tree6' then 1 ELSE 0 END)) AS Six,
SUM((CASE u.Tree WHEN 'tree7' then 1 ELSE 0 END)) AS Seven,
SUM((CASE u.Tree WHEN 'tree8' then 1 ELSE 0 END)) AS Eight,
SUM((CASE u.Tree WHEN 'tree9' then 1 ELSE 0 END)) AS Nine,
SUM((CASE u.Tree WHEN 'tree10' then 1 ELSE 0 END)) AS Ten,
SUM((CASE u.Tree WHEN 'tree11' then 1 ELSE 0 END)) AS Eleven,
SUM((CASE u.Tree WHEN 'tree12' then 1 ELSE 0 END)) AS Twelve,
SUM((CASE u.Tree WHEN 'tree13' then 1 ELSE 0 END)) AS Thirteen,
SUM((CASE u.Tree WHEN 'tree14' then 1 ELSE 0 END)) AS Fourteen,
count(u.server) as totalservers,
sum(cast(left(u.totalspace,len(u.totalspace)-2) as int)) as totalspace,
sum(cast(left(u.totalusedspace,len(u.totalusedspac e)-2) as int)) as totalusedspace,
count(p.printer) as numprinters
from serverops.dbo.v_userviews u LEFT OUTER JOIN novell_twr.dbo.l_printers p ON u.propid = p.propid
where u.os='netware'and u.state in ('ny', 'nj', 'fl')
group by u.propid, u.address
the l_printers table is in this format:
Printers Server Propid
nvarchar nvarchar varchar
Thanks for all your help. :beer:
View 6 Replies
View Related
Mar 28, 2008
insert into----
select ID_NO,cast(row_number() over(partition by ID_NO order by ID_NO)as varchar(2))
from
test_222
I am trying to insert into test222 table .The id_no column is varchar field
error:
Arithmetic overflow error converting expression to data type varchar.
The statement has been terminated.
View 7 Replies
View Related
Jul 31, 2007
Ok, this is starting to drive me nuts, I've been trying to get this to work for 2 days now. I have a .csv file that I'm reading and importing the data into my table. I defined Derived columns for the type and the lengths as well. I have one column that keeps kicking out this error: The column in the db has a length of 50, the column in my derived column is set to 50, now there are some strings in the colum from the csv file that contain more then 50 characters so I have this in my derived column section: to get the first 50 characters.
(DT_WSTR,50)NAME
[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "NAME" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
so to some it up. My field (name) in my .csv file can contain 2 to 80 characters but I only want the first 50 and if the field contains greater then 50 characters I'm getting the error above.
Has anyone else run into something like this? If so how did you get it working?
View 25 Replies
View Related
Feb 20, 2006
Hi,
I am getting real stressed out because while trying to import an excel file into a temporary table i get a truncation error...
The max lenght used in the origin column is about 800 characters. So how the hell can i get the column to load? Jesus... this should be easy task... :P
Anyone experiencing this kind of stuff?
Regards,
Luis Simões
View 1 Replies
View Related
Mar 7, 2006
i trying to
import a text file to a table
which has the following fields
transid int
transitem tinyint
value money
starttime datetime
info nvarchar(128)
On my text file,
i put column 0 as numeric
col 1 as four-byte unsigned integer [DT_UI4]
col 2 as currency [DT_CY]
col 3 as database timestamp [DT_DBTIMESTAMP]
col 4 as Unicode string [DT_WSTR]
then it give me
Warning 1 Validation warning. Data Flow Task: Destination - TransItem [25]: Truncation may occur due to inserting data from data flow column "Info" with a length of 128 to database column "Column 4" with a length of 50. Package3.dtsx 0 0
anyone can help?
View 3 Replies
View Related
Jun 11, 2007
Hi allToday I'm so incredibly annoyed I have a simple Table which has one Identity column plus an integer Column with Unique constraint and some varchar fields.When i change the value of that Unique Constraint Column , the value will change successfully But today i find a record (Just By Chance) that when i change the value of its filed i recieve the following Error: its filed has the value of 2519 and i wanted to update it to 2520 !!!
---------------------------SQL Server Enterprise Manager---------------------------[Microsoft][ODBC SQL Server Driver][SQL Server]Arithmetic overflow error for type int, value = 6262227669.000000.
[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated. ---------------------------OK Help ---------------------------
As i said earlier i have no problem with other records , that's strange.
Could anyone help me Please?
Thanks in advance.Kind Regards.
View 7 Replies
View Related
