Hi,
I have a column in my database which came from Oracle database. In this Column I have date but the format is strange for me (Example: 105046).How can I convert this date to MM/DD/YY format in sql 2005?
Thanks
Hi,
I have a column in my database which came from Oracle database. In this Column I have date but the format is strange for me (Example: 105046).How can I convert this date to MM/DD/YY format in sql?
Thanks
Hi!
I'm loading from Oracle using the OraOLEDB.Oracle.1 provider since I need unicode support and I get the following error:
TITLE: Microsoft Visual Studio
------------------------------
Error at myTask [DTS.Pipeline]: The "output column "myColumn" (9134)" has a precision that is not valid. The precision must be between 1 and 38.
------------------------------
ADDITIONAL INFORMATION:
Exception from HRESULT: 0xC0204018 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------
BUTTONS:
OK
------------------------------
For most of my queries to Oracle I can cast the columns to get rid of the error (CAST x AS DECIMAL(10) etc), but this does not work for:
1) Union
I have a select like "SELECT NVL(myColumn, 0) .... FROM myTable UNION SELECT 0 AS myColumn, .... FROM DUAL"
Even if I cast the columns in both selects (SELECT CAST(NVL(myColumn, 0) AS DECIMAL(10, 0) .... UNION SELECT CAST(0 AS DECIMAL(10, 0)) AS myColumn, .... FROM DUAL) I still get the error above.
2) SQL command from variable
The select basically looks like this:
"SELECT Column1, Column2, ... FROM myTable WHERE Updated BETWEEN User::LastLoad AND User::CurrentLoad"
Again, even if I cast all columns (like in the union), I still get the same error.
Any help would be greatly appreciated. Thanks!
So I have to build dynamic T-SQL because of a date parameter that will be provided. The Date Parameter will be provided in SSRS in normal MM/DD/CCYY format. So how do I then convert that date to my Oracle format
NUMERIC(8,0) CCYYMMDD?
I tried this...
SET@SQLQuery=@SQLQuery+'ANDMEMBER_SPAN.YMDEFF<='''''+CAST(@AsOfDateASVARCHAR)+''''''+@NewLineChar;
SET@SQLQuery=@SQLQuery+'ANDMEMBER_SPAN.YMDEFF>='''''+CAST(@AsOfDateASVARCHAR)+''''''+@NewLineChar;
but that put it in the format of...
AND
MEMBER_SPAN.YMDEFF<=''2015-04-01''
AND
MEMBER_SPAN.YMDEFF>=''2015-04-01''
Which is close...I think I just need to lose the "-"
This is driving me nuts..
I'm trying to extract some data from a table in oracle. The oracle table stores date and time seperately in 2 different columns. I need to merge these two columns and import to sql server database.
I'm struggling with this for a quite a while and I'm not able to get it working.
I tried the oracle query something like this,
SELECT
(TO_CHAR(ASOFDATE,'YYYYMMDD')||' '||TO_CHAR(ASOFTIME,'HH24:MM : SS')||':000') AS ASOFDATE
FROM TBLA
this gives me an output of 20070511 23:06:30:000
the space in MM : SS is intentional here, since without that space it appread as smiley
I'm trying to map this to datetime field in sql server 2005. It keeps failing with this error
The value could not be converted because of a potential loss of data
I'm struck with error for hours now. Any pointers would be helpful.
Thanks
I am using sqlserver to manipulate date from oracle through a DTS package. I am trying to use the dateadd function to get the past 7 days data from the oracle database. I keep getting an invalid column name error. Here is what I have SELECT * FROM CSMAST WHERE Received_date >= dateadd('dd',-7,to_date(sysdate))
View 1 Replies View RelatedI want to update Oracle table from SQL Server 7. I need to read data from a table in SQL Server and want to update Oracel table accordingly. Please help.
Thnaks in advance.
Hi Gurus,
I need to convert this statement to sql server.
SELECT to_date('24-08-2007 13:11:12','dd-mm-yyyy hh24:mi:ss'),to_date('24-aug-2007 13:11:12','dd-mon-yyyy hh24:mi:ss') from dual
can anyone help please.
What is the Syntax?
I can say "SELECT * FROM Invoices WHERE INVOICE_DATE > sysdate", but not INVOICE_DATE > sysdate - 1 (in any of its variations -- (sysdate-1), trunc(sysdate-1), trunc(sysdate)-1, etc.)
If using ODBC Access, I can say INVOICE_DATE > DATE()-180, but that syntax doesn't work with ODBC Oracle.
On a less positive note, is this beta software? The Import/Export wizard exports tables that cannot be re-imported. That's Microsoft SQL Server to Microsoft Access. Varchar(3)'s turn into Memos, and unless someone tells me differently, nothing will turn a Memo back into a Varchar(3).
I have an SSIS package that moves data from SQL Server to an legacy Access database. In SQL Server, there is a date/time column that I need to split into a separate date column and time column in the access database. Initially I just created a derrived column for the time and set the expression equal to the source date/time column from SQL Server. Unfortunately, that just makes the date column and time column the same having the full date/time.
What expression can I use during a derrived column transformation to assign just the date to a derrived column and just the time to another derrived column?
Thanks,
Steve
How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedI want to compare two columns in the same table called start date and end date for one clientId.if clientId is having continuous refenceid and sartdate and enddate of reference that I don't need any caseopendate but if clientID has new reference id and it's start date is not continuous to its previous reference id then I need to set that start date as caseopendate.
I have table containing 5 columns.
caseid
referenceid
startdate
enddate
caseopendate
[code]...
PHP Code:
INSERT INTO [GPO].dbo.tblMetric (KPI_ID, METRIC_ID, GOAL, REPORTING_MONTH, ACTUALS)
SELECT
1 AS KPI_OWNER_ID
, 23 AS METRIC_ID
, .75 AS GOAL
, CAST(Z.REPORTING_MONTH as DATE) AS REPORTING_MONTH
, SUM(CAST(FTP_COUNT AS DECIMAL))/SUM(CAST(FULL_COUNT AS DECIMAL)) AS ACTUALS
[Code] ....
The insert column I am trying to get into is a date type. The original state of the field is YYYYMM varchar. How to get this into the table.
CREATE TABLE #Dateissue
(ID int,
Code nvarchar (20),
Datein datetime,
Declined datetime )
[Code] .....
I have a table here. I want find a way of getting the latest date, when the code is the same. If the Declined date is null. Then I still want the latest date. E.g. ID 3.
If the declined date is filled in. Then I want to get the row, when the Datein column value is greater then the declined date only.
I tried grouping it by max date, but i got an error message when trying this out. Against the code
WHERE MAX(Datein) > Declined
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. What do I need to do to get both my outputs working?
So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.
SELECT*
FROM[dbo].[EODPosting]
WHERE[EODPosting].[MatchDate]=GETDATE()
Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?
i have a excel file in which i have a date column it having the below date formats below
Install Date
20140721
31.07.2014
07.04.2015
20150108
20140811
20150216
7/21/2014
11.08.2014
07.08.2014
So using SSIS how we would load this date column into the table into one format like dd/mm/yyyy or any single date format
select to_char(INITIAL_LOAD_DATE,'dd-mon-yyyy hh:mi:ss') from trans
View 14 Replies View RelatedActivityDate is a report parameter set up as a date that I'm trying to pass into an Oracle query. The specific WHERE clause is
WHERE PROJ_DATE = TO_DATE(:ActivityDate,'YYYY-MM-DD')
When I run the query from the Data tab, all works as expected. I suspect the reason is that I under the date as 2005-12-31. If I enter the date as 12/31/05, the query fails ("Not a valid month") unless I change to function's format to 'MM/DD/YYYY' in which case I, again, get good results.
But when I run the report from Preview, I get no results at all no matter what format I use in the function.
Any chance any of you have seen this and know how to work with it?
Hello.
I'm trying to put in an SQL server database some data extracted from Oracle Server 9i.
During the load process, the "OLE DB Destination" in the task chokes up when it finds a record containing the date '0197-01-01 00:00:00' (i got this by putting the error output to a column of type varchar(50)). I can't use the Condicional Split's date functions to filter this out because they also choke on the strange date.
Can anyone give a sugestion?
Thanks in advance,
Hugo Oliveira
I need to compare the contents of a column.
I have a table with 1 column. Below are the sample contents..
DateInterval
2012-06-01 00:30:00.000
2012-06-01 01:00:00.000
2012-06-01 01:30:00.000
2012-06-01 02:00:00.000
2012-06-01 02:30:00.000
[code]....
as you can see, the records have a 30minutes time interval. i need to create a query to know if there are missing records in the table. so basically the result should be this:
DateInterval
2012-06-01 18:00:00.000
2012-06-01 20:30:00.000
if it is not doable, we can get the nearest record of all missing records like this:
DateInterval
2012-06-01 17:30:00.000
2012-06-01 20:00:00.000
or this:
DateInterval
2012-06-01 18:30:00.000
2012-06-01 21:00:00.000
or this:
DateInterval
2012-06-01 17:30:00.000
2012-06-01 18:30:00.000
2012-06-01 20:00:00.000
2012-06-01 21:00:00.000
Aim – Convert the following field ”[INSTALLATION_DATE]” date format from “20090709” Into this “2009-07-09” ,
Also create a new column called “BegMonth” which selects first day of the given month of the converted date column
The table is ;
SELECT
[FDMSAccountNo],
[INSTALLATION_DATE]
FROM [FDMS].[dbo].[stg_LMPAB501]
Results
FDMSAccountNoINSTALLATION_DATE
87800000088420030521
Required Results
FDMSAccountNoINSTALLATION_DATEBegMonth
8780000008842003-05-212003-05-01
My requirement is to get the earliest start date after a gap in a date column.My date field will be like this.
Table Name-XXX
StartDate(Column Name)
2014/10/01
2014/11/01
2014/12/01
[code]...
In this scenario i need the latest start date after the gap ie. 2015/09/01 .If there is no gap in the date column i need 2014/10/01
Hi,
I need to insert into a column (lets say column x) a date based on the date on another column (lets say column y).
What I need is:
Take the day and month from column x (all records are formated yyyy-mm-dd)
Place it in column y
The yyyy in column y should be - currenct year +1 and no the year in column x.
All help welcome.
Hello,
We have a bunch of Audit tables that contain almost exact copies of the operations tables. The audit tables also include:
AuditID - the audit action (insert, modify - old, modify - new, deleted)
AuditDate - date and time of action
AuditUser - User who did it...
At the end of the day I need to know for any given record what it looked like at the beginning of the day and what it looks like at the end of the day. There could have been numerous changes to the record throughout the day, those records I am not interested in. Only the first record and the last record of a give day.
I am going to be doing a lot of MIN(AuditDate) and MAX(AuditDATE) and .. WHERE AuditDate BETWEEN '10/1/2007 00:00:00' AND '10/1/2007 11:59:59' ...
Question: Whats better for performance:
1. Separating out the date and time and doing a clusterd index on the date.
2. Keeping date and time in the same column and just use a normal index.
3. Better ideas?
Thanks,
Bradley
I am trying to insert records with a datetime field type from a SQL Server to an Oracle table using SSIS.
Any suggestions to get it to work?
I am trying to create a whole number DAX calculated column that is derived from a date column. Basically it gets the date from the source data column and outputs it as an integer in the YYYYMMDD format.So 01/OCT/2015 would become --> 20151001...I've been fidgeting with DAX but my problem is that I keep missing the leading zeroes for months and days. So 01/March/2015 becomes 201531 which is not what I want (I need 20150301 in this case).
View 2 Replies View RelatedHi,
I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046
Thanks.
Basically, the sample raw data is a result from my last cte process which consolidate all the records. I want to find the closest date in PO ended using Receipt_date column but my problem, for this ESN R9000000000019761824, i wanted to get the latest or the last transaction date.
please see below DDL and sample data.
--this is the result from my last cte process
Create table #sample
(ESN nvarchar(35),ESN2 nvarchar(35), Receipt_Date datetime,PO_ENDED datetime)
insert into #sample(ESN,ESN2,Receipt_Date,PO_ENDED)values('990002036924452','990002036924452','2015-01-07 17:39:44.660','2014-01-09 04:13:29.000')
[Code] .....
Expected result:
ESN-------------------ESN2-------------Receipt_Date-------------POENDED---------------
--------------------------------------------------------------------------------------
990002036924452-------990002036924452--2015-01-07 17:39:44.660--2015-04-23 20:26:55.000
990002038378525-------990002038378525--2015-01-07 05:29:56.923--2015-05-29 14:50:52.000
R9000000000019761824--354403060637509--2015-01-03 19:23:54.980--2015-03-20 16:43:07.000
[Code] ....
Hi,
I need to create a derived column for each row in a SQL dataset.
This derived column needs to be created by passing across two values from the SQL dataset and querying an Oracle table based on those parameters. If the Oracle query returns a record(s) then the derived column should be set to 1 otherwise leave it as default (0).
One of these parameters needs to check a date range so I can't use a Lookup Transformation...any ideas how I can accomplish this ?
Thanks
I have two columns in a table:StartDate DateTime and StartTime DateTime.The StartDate column holds a value such as 07/16/2004The StartTime column holds a value such as 3:00:00 PMI want to be able to add them in a stored procedure.When I use StartDate + StartTime I get a date two days earlier than expected.For example, instead of 7/16/2004 3:00:00 PM StartDate + StartTime returns7/14/2004 3:00:00 PM.Can anyone point out wht I'm doing wrong with this one?Thanks,lq
View 2 Replies View RelatedI have a query like following
SET NOCOUNT OFF
SET ROWCOUNT 0
DECLARE @StartDate DateTime
DECLARE @EndDate DateTime
SET @StartDate = CAST (DATEDIFF(d, 0, DATEADD(d, 1 - day(getdate()), getdate()))as datetime)
SET @EndDate = GetDate()
[Code] ....
and when i execute it, it gave a return that i expected, but then i want to add a date column on the first column.
I am populating oracle source in Sql Server Destination. after few rows it fails it displays this error:
[OLE DB Destination [16]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description:
"Invalid date format".
I used this script component using the following code in between the adapters, However after 9,500 rows it failed again giving the same above error:
To convert Oracle timestamp to Sql Server timestamp
If Row.CALCULATEDETADATECUST_IsNull = False Then
If IsDate(DateSerial(Row.CALCULATEDETADATECUST.Year, Row.CALCULATEDETADATECUST.Month, Row.CALCULATEDETADATECUST.Day)) Then
dt = Row.CALCULATEDETADATECUST
Row.CALCULATEDETADATECUSTD = dt
End If
End If
I don't know if my code is right . Please inform, how i can achieve this.
What is the syntax for adding a column where you are adding a year to a date in a date format? For example adding a column displaying a year after the participation date in date format?
View 1 Replies View Related