I have an issue. When I am performing a Merge Join using two fields of type
DT_WSTR on both sides of the Join, the Dataviewer after the Join only shows the left side 2 key
fields having values populated but both fields from the right hand side as being NULL. The Dataviewers I put in before the join show both sides of the join fields being populated ( 2 sides x 2 fields ). If I remove one of the fields from the join it shows both fields from the left side and the right side of the join being populated . I am trying to knock out duplicate values from the insert using 'genuine' Nulls from the right hand side so I need both parts of the 'Key'. I have checked the adnvanced tab that ignores Case etc but has had no effect.
I am using the technique from here : http://www.sqlis.com/311.aspx
Is this an SSIS bug ??? It is driving me up the wall.
i am new at T-SQL and am trying to delete entries in a column that are not integers. i have the following code. why does it not work.
T-SQL
select invoicenumber from [control register] where convert(int, invoicenumber) like '%' if @@error > 0 begin delete from [control register] where invoicenumber = invoicenumber end go
gives me the error in Query analyser:
Server: Msg 245, Level 16, State 1, Line 1 Syntax error converting the nvarchar value '10-3-05' to a column of data type int.
@@error is supposed to pick up the error. why is it not.
please could you reply urgently at chris@captivedesign.co.za
can someone tell me why this sql statement doesnt work?
SQL = "SELECT (Count(department_id) as 'totals' FROM nonconformance WHERE department_id = '7'),(Count(department_id) as 'totals2' FROM nonconformance WHERE department_id = '1') FROM nonconformance"
Can someone tell me why this thing in the end return Null?
declare @uz_id uniqueidentifier set @uz_id=null set @uz_id= case @Uz_ID when null then '00000000-0000-0000-0000-000000000000' else @Uz_ID end select @uz_id
...it should return '00000000-0000-0000-0000-000000000000' in my opintion
P.S. When I say return i mean the value that is shown after 'select @uz_id' is executed:)
This is an insert statement i'm trying to run. I want it to only insert this recird if the corresponding EMPLOY_REF exists in the EMPLOYEE table. Heres my statement:
INSERT INTO SALHISTY(EMPLOY_REF, SALARY, SAL_REASON, SAL_DATE) VALUES ('8971','175000.0000','ANNRV','2007-04-01 00:00:00.000') WHERE '8971' IN (SELECT EMPLOY_REF FROM EMPLOYEE)
This is the error message i'm getting.
Server: Msg 156, Level 15, State 1, Line 3 Incorrect syntax near the keyword 'WHERE'.
from ( select count(*) as Patients, [pct of res] as pct from testing where [18 week wait] <= 18 group by [pct of res] ) as a right outer join (select distinct[pct of res] from testing) as c on a.pct=c.[pct of res]and a.pct <> 'null' --is not null
(select count(*) as Patients, [pct of res] as pct from testing where [18 week wait] >18 group by [pct of res] ) as a left outer join as b on c.[pct of res]=b.pct
I have the following in my commandtext but it doesnt seem to replace the LanguageColumnName variable: Dim cmd As New SqlCommand("SELECT '+@LanguageColumnName+' FROM tblSports a INNER JOIN tblUsersAndSports b ON a.SportID=b.SportID " & _ "WHERE b.UserCode=@UserCode", MyConnection) cmd.Parameters.Add(New SqlParameter("@UserCode", UserCode)) cmd.Parameters.Add(New SqlParameter("@LanguageColumnName", LanguageColumnName))I have tried '+@LanguageColumnName+' and also just @LanguageColumnName but this variable isnt replaced for some reason.The value of LanguageColumnName is "de"...the funny thing is that when I just type my command like the following it DOES work..:SELECT de FROM tblSports a INNER JOIN tblUsersAndSports b ON a.SportID=b.SportID " & _ "WHERE b.UserCode=@UserCodeWhat am I doing wrong?
I have my db in a pocket pc wm5.0, I just want to make a simple query select * from table where pk = '1' but this doesnt work, if you tried any other field else than the primary key it works... WHY???
would it be a problem with the sdf file? help please!!!
HI All,I have started sqlserver in single user mode and changed filename in sysaltfiles for tempdb too point to new location. While starting sqlserver in normal it points to the old path and doesnt get updated with the new path.1.)is there any systable still to be altered???2.) i have even tried alter database, doesnt work.3.)The master files have been taken from server1 (where tempdb points to d:data) to server2 ( where i need to point tempdb to point E:mssqldata). i can detach and attach msdb and model successfully, but in the case of tempdb, i cant either alter sysaltfiles or detach and attach tempdb to new path., too tired in trying all the possiblities... Is there any possibility to update tempdb to point to new path???
i've made a report containing a subreport. the subreport is in a table. the table headers should repeat. but if the subreport expands more than one site, the table header doesnt repeat.
okay. i could place the table header in report header, but in report header i cant use fields from a dateset.
hi, i hope this is the correct forum?i have developed a small asp.net 2.0 web site with vwd using sqlExpress which appears to just bean data file and a log file in my app_data directory. there are two databases, the users one that is created by the login manager and my own that i created to store data. this all works fine on my laptop. i have an xp-pro machine setup with IIS and the frontpage web extentions, i have also installed the .net framework v2.0 on it and done all the windows updates. i have given app_data read/write access for the aspnet and network service users.i used the copy site feature of vwd to install on the xp box and although the site seems to workwhen it needs to bind a gridview to my sqldatasource it gives an error Cannot open user default database. login failed.Loginfailed for user 'rlxpaspnet'Any ideas? i have googled and tried all sorts, but to no avail, so i throw my self on your mercy!Cheers,russ
I've a problem with my database. Till yesterday the option for Auto Grow of Database (10 %) was working very fine, but now it seems to be some problems with it. Finally I had to specify a restricted size for the database and then it again startd to give me some space in the database to write in. Ideally it should have worked automatically, isnt it ???
There is no problem with the space on the drive, I still have some 76 gb of free space there ...
Hello, I tried this and it doesnt work, I just started up the service with -T flag on default instance but I havent been able to start it with -T flag 1400 on named instances.
How can I Know that the directory MSSQL.4 is the MIRROR instance??
C:Archivos de programaMicrosoft SQL ServerMSSQL.4MSSQLBinn>sqlservr.exe -T 1400 MIRROR
I tried LUCHOMIRROR, MSSQLSERVER$MIRROR
and It doesnt work
Thanks
Another question I have, in the documentation it says that mirroring is only for evaluation purposes and not for production environments, what does it suppose to mean? MSFT didnt test the mirroring feature enough? If its not suppoerted why its included..?
Microsoft support policies do not apply to the database mirroring feature in SQL Server 2005. Database mirroring is currently disabled by default, but may be enabled for evaluation purposes only by using trace flag 1400 as a startup parameter. (For more information about trace flags, see Trace Flags (Transact-SQL).) Database mirroring should not be used in production environments, and Microsoft support services will not support databases or applications that use database mirroring. Database mirroring documentation is included in SQL Server 2005 for evaluation purposes only, and the Documentation Policy for SQL Server 2005 Support and Upgrade does not apply to the database mirroring documentation.
I need info from 2 Tables. from the Table 2 I just need 1 column. When i ask for this column the output I get is data repeating themselve many times.
Distinct, should give me unique data, but is doesnt.... the code:
SELECT DISTINCT FSenddate, FSupplyIDName, FSupplyerNumber,FBillNo,FSourceBillNo,FItemName,FItemModel, FAuxQty,FAuxTaxPrice,FHeadSelfP0237 FROM vwICBill_26 WHERE FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE()
This code just works in Table1 (vwICBill_26)
but with table 2 (vwICBill_1)
SELECT DISTINCT vwICBill_26.FSenddate,vwICBill_26.FSupplyIDName, vwICBill_26.FSupplyerNumber,vwICBill_26.FBillNo, vwICBill_26.FSourceBillNo,vwICBill_26.FItemName, vwICBill_26.FItemModel,vwICBill_26.FAuxQty, vwICBill_26.FAuxTaxPrice,vwICBill_26.FHeadSelfP0237, vwICBill_1.FDate,vwICBill_1.FContractBillNo FROM vwICBill_26,vwICBill_1 WHERE vwICBill_26.FSenddate BETWEEN DATEADD(dd,-14,GETDATE()) AND GETDATE() AND vwICBill_1.FContractBillNo=vwICBill_26.FSourceBillNo
The last sentence is the problem I want that it shows me the data that is not equal. As soon as I implement the not equal it shows me the massive repeating data. I mean even without the last sentence I get this data output.
All together, I want a clear database output without data repeating. Any ideas how it may work without DISTINCT?
I think this problem is a typical amateure problem, but I would apreciate help!
Msg 1008, Level 16, State 1, Procedure P_SEL_ALLPERSONAS, Line 13
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
The distributed query seems to work on the management studio of the server where I have linked the other server to but not accross the network on other management studio with the same impersonated logins. The error I get is.
OLE DB provider "SQLNCLI" for linked server "usbo-sql01" returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Msg 18452, Level 14, State 1, Line 0
Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
I am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
Normal] From: XXX "(DEFAULT)" Time: XXX SQL statement: BACKUP DATABASE [msdb] TO VIRTUAL_DEVICE = "Data Protector_(DEFAULT)_msdb_06_00_14" WITH NAME = 'Data Protector: 2007/08/01 0064', DIFFERENTIAL, BLOCKSIZE = 4096, MAXTRANSFERSIZE = 65536; [Warning] From: XXX "(DEFAULT)" Time: XXX Error has occurred while executing a SQL statement. Error message: '<Microsoft SQL-DMO (ODBC SQLState: 42000):bdb> [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot perform a differential backup for database "msdb", because a current database backup does not exist. Perform a full database backup by reissuing BACKUP DATABASE, omitting the WITH DIFFERENTIAL option. [Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE is terminating abnormally.'
Ive tried to do a full followed straight after by a diff but doent help.
in both vs2008 I added a ReportViewer control to my WinForm, intending to render an RS 2005 report remotely. In the design pane (Report Viewer Tasks Popup) I specify <server report>, URL http://server name/reportserver$instance name path /folder/report name
I started getting a msg saying "the source of the report definition has not been specified". If I hit refresh, the report renders. Before I started playing with the designer setting, and only had the c# stuff specified, I wouldnt even get the message, the control would appear with all RS buttons (eg page forward arrow etc) disabled.
Does anybody know why the message is appearing and how to get c#'s settings to work immediately like designer settings?
I just upgraded to SQL server 2005 and some of my Openrowset to Oracle doesnt work. I found out that the issue occur with field with structure Numeric.
The issue is not solve even when I try to cast the field to varchar. sometimes it succeeded and sometimes I get error 7320 & 7321.
While installing SQL Server 2005 Enterprise Edition on Windows Vista Ultimate the setup alerts me "there are known compatibility problems, please install SP2 after this". So ok, all went nice and installed without error. IIS 7 installed fully, so all green in setup display. (But after installation i do not see any service which begins with SQL***...) At the end, the setup wanted to start the administration Tool. Ok, but my name was not listed, so i could not add me to the permitted users. I can not use any tool, because i have no rights.
Some Ideas?
Microsoft SQL Server Management Studio 9.00.3042.00 Microsoft Analysis Services-Clienttools 2005.090.3042.00 Microsoft Data Access Components (MDAC) 6.0.6000.16386 (vista_rtm.061101-2205) Microsoft MSXML 3.0 4.0 5.0 6.0 Microsoft Internet Explorer 7.0.6000.16546 Microsoft .NET Framework 2.0.50727.312 Betriebssystem 6.0.6000
I set up the "Send Email Task" succesfully with "SMTP Connection to myExchangeSERVER" using "Windows Authentication" However, as we all know - you can't have html format for the Send Mail Task. BUT this piece of code straight from MSDN doesnt work for me - each time it pops up this "Mail Sent Succesfully" - but I receive NO freaking EMAILs!!! Am I missing something or is it another one of those Microsoft "gotchas" ?
Imports System Imports System.Data Imports System.Math Imports Microsoft.SqlServer.Dts.Runtime Imports System.Net.Mail
Public Class ScriptMain Public Sub Main() Dim htmlMessageTo As String = "me.here@mydomain.com" Dim htmlMessageFrom As String = "SSIS@mydomain.com" Dim htmlMessageSubject As String = "SSIS Success - My Package" Dim htmlMessageBody As String = _ Dts.Variables("User::HTMLtemplateText").Value.ToString Dim smtpServer As String = "myExchangeSERVER" SendMailMessage( _ htmlMessageTo, htmlMessageFrom, _ htmlMessageSubject, htmlMessageBody, _ True, smtpServer)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub SendMailMessage( _ ByVal SendTo As String, ByVal From As String, _ ByVal Subject As String, ByVal Body As String, _ ByVal IsBodyHtml As Boolean, ByVal Server As String)
Dim htmlMessage As MailMessage Dim mySmtpClient As SmtpClient
mySmtpClient = New SmtpClient(Server) Dim myCred As New System.Net.CredentialCache() mySmtpClient.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials mySmtpClient.Send(htmlMessage) MsgBox("Mail sent") End Sub
I have an extra colum in a matrix report, that i am trying to use as the AVG Monthly_DB size. But when i try to use this AVG(SUM(MONTHLY_DB.VALUE)) it does not work. I get an error messege that reads... Aggregate functions cannot be nested in aggregate functions. What do i do? I tried to do it in the code, but had no luck doing it that way too.
In sql I perform the following SELECT * FROM xlsdci x LEFT OUTER JOIN fffenics f ON f.[derived deal code] = x.[manual dcd id]
which gives me a row count of 2709 rows
In SSIS I have a merge join component (left outer) left input = xlsdci with a sort order of 1 ASC on [manual dcd id] (OLE DB source component) right input = fffenics with a sort order of 1 ASC on [derived deal code] (OLE DB source component)
which when run in the IDE gives me a rowcount of only 2594 rows
Why is this so?
Also if I change the join to INNER in the merge join, the number of rows drops dramatically to only 802. Fair enough, I hear you cry, maybe there are IDs in the 'xlsdci' table that are not in the 'fffenics' table. Ok. But the following SQL reveals that there are only 14 rows(IDs) in 'xlsdci' that are not in 'fffenics'
SELECT * FROM xlsdci WHERE [manual dcd id] NOT IN (SELECT [derived deal code] FROM dbo.fffenics)
Till yesterday every thing was fine....after i installed visual studio...god knws wat happnd dat it was not working, i did everything again but noe using my asp.net forms i am unable to write/edit/update the database, though i can view the same.....can any one suggest was might b d problem.
(i have set permissions for IUSER bot Read and Write)
Hi All, This is reletaed to SQL Server 2005. I have a backup file that does not have any .bak extension and I am trying to restore it against a already existing DB. Thats the first time I am dealing with a backup that does not have a .bak extension and I dont know how to restore it.
The .bak backups are easy to restore and I restore it in SQL 2005 managment studio with the following steps; a) I right clicking on the existing database (where I want it to be restored) and b) then click Tasks , c) click Restore, and d) click Database, and e) then in the restore database window click 'From device', f) then click '...' to browse and g) click add to browse and add the backup file to be restored.
I am doing the above steps for the non .bak extension backup file but I am unable tio add the file?
In SQL 2005 managment studio how can I restore a backup (that doesn't have .bak extension) against a exsisting database?
I have created a report which works great when the users run from IE6, but when anyone runs report from IE7, the report displays ok, but the document appears to build but displays absolutely nothing.
Has anyone seen this problem with IE7 using Reporting Services 2000?
I have just started using SQL Server reporting services and am stuck with creating subreports.
I have a added a sub report to the main report. When I right click on the sub report, go to properties -> Parameters, and click on the dropdown for Parameter Value, I see all Sum and Count fields but not the data fields.
For example, In the dropdownlist for the Parameter value, I see Sum(Fields!TASK_ID.Value, "AppTest"), Count(Fields!TASK_NAME.Value, "CammpTest") but not Fields!TASK_NAME.Value, Fields!TASK_ID.Value which are the fields retrieved from the dataset assigned to the subreport.
When I manually change the parameter value to Fields!TASK_ID.Value, and try to preview the report, I get Error: Subreport could not be shown. I have no idea what the underlying issue is but am guessing that it's because the field - Fields!TASK_ID.Value is not in the dropdown but am trying to link the main report and sub report with this field.
Am I missing something here? Any help is appreciated.
Hello, Im having a problem with this query....SELECT a.ref, COUNT(b.entrypage) AS counter FROM SiteCore.dbo.Campaigns AS a LEFT OUTER JOIN webStats AS b ON b.entrypage LIKE '%?ref=partners%' GROUP BY a.ref But i want it to look more like this, so it pulls the approprite rows its selfSELECT a.ref, COUNT(b.entrypage) AS counter FROM SiteCore.dbo.Campaigns AS a LEFT OUTER JOIN webStats AS b ON b.entrypage LIKE '%?ref=' + a.ref + '%' GROUP BY a.ref The first one return the correct count where as the latter doesnt retuen anything, could any one shed any light as to what the problem could be? Thanks Bart
