A Matrix Above Two Charts. Right Chart Moves Depending On Matrix Growth ... ???
Jan 10, 2008
I have a Matrix table that expands to the right when choosing an amount of months to be shown. Under this matrix I have to Charts. The two charts are situated together, that is no space between them, and to the left of the report.
Now, if I choose a lot of months, say three years the matrix diagram will be huge to the right. The problem I have is that the second diagram, the one on the right, moves to the right depending on how big the report gets, and this is not good at all. The two charts are supposed to be all the way to the left.
I'm having trouble inserting a conditional format to a specific column.
e.g.: Matrix within the rows the "weeks" (1, 2, 3, ... , 52), and in the column a "lastyear revenu", "thisyear revenue" and a difference between them, "delta %", in percent grouped by the stores. I added a subtotal to it so I get in the latest column the "total lastyear revenue", the "total thisyear revenue" and a difference between them in percent for all stores, "total delta %", for a specific week.
Problem: I want to colour the "delta %" column green when it is greater then the "total delta %" value.
I thougt this would be quite easy, but it really is a pain in the *** because, in the background expression dialog box, I can't refer to the subtotal cells ...
I have a matrix report where I drill down from a business' divisional level to an office level. A subreport is generated by clicking on the relevant data field. However, when at divisional level, clicking on the data field simply generates the data from the first office row. I want it so that when the column is collapsed to divisional level, it shows the data for the entire division.
So... is there any way I can write an expression that creates different subreports based on whether a matrix column is expanded or collapsed?
I'm trying to creating the following matrix in SSRS 2008R2 (with more product categories than shown here)The matrix only shows the last two year per product. Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â The matrix in the report builder looks like this:
For me it's unclear what the expression should be. (or perhaps I need to make a calculation in my TSQL?)
As Row Groups in the matrix I've got:Â
Product; Year
As Column Groups i've got Month
I can't get it to work. Previous doesn't seem to work in this case (only when I got a total of each year (e.g. one column instead of 12))
Does any body know that creating free form rports using Report Builder is possible?
Free-form report - in the sense - that user should be able to drag the fields from the leftside fields pane and drop on body as we do in report designer using BI studio.
I could not figure out a way to do so. Is this a limitation?
Hi everyone, I have created a matrix report which takes 3 parameters being store, year and quarter which then displays budget information in a matrix. This all works fine but I would also like to have a bar chart below the matrix to visually show the results.
However when I add the bar chart and add the relevent dataset details etc the chart does not appear when I preview the report. I wondered if the chart wasn't showing because the parameter values are not being passed to the chart.
Has anybody any idea of adding charts to reports in this way or knows of any instructions to do so.
I am using a matrix to display current and historical financial data. To do this, I am using 5 different datasets. Each dataset contains 1 row of data for a specific year for a specific account.
Now that problem I am having is displaying this data in a chart. When I create a new chart, it asks which dataset I would like to use. I do not want to use any specific dataset, I want to get chart's data from the matrix. Is this possible?
I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing, ( (Fields!Amount.Value) /Previous(sum(Fields!Amount.Value)) ) )
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category") should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
Hi,I am studying data mining features of SSAS and for a workshop I'vecreated 2 views derived from vTargetMail view of AdventureWorksDW.Train data consists every record except those in Pacific, and testview consists only records from Pacific area.1. I've created a mining structure based on Decision Tree and selectedBikeBuyer as predictable column.2. According to input column suggestions, I've selected Age,Eng.Education, NumberCarsOwned, YearlyIncome, CommuteDistance,NumberChildsatHome and TotalChildren as input columns,3. I've modified no other setting, and deployed project.I can get training results in decision tree browser and dependencynetwork (and both seem to give rather logical results) however, when Itry to browse lift chart or classification matrix I get an emptyclass.matr. and a lift chart of a single 45 degree line.Am I missing a step, or must I do some fine-tuning on (what)parameters?Thanks...
Hi, I am studying data mining features of SSAS and for a workshop I've created 2 views derived from vTargetMail view of AdventureWorksDW. Train data consists every record except those in Pacific, and test view consists only records from Pacific area.
1. I've created a mining structure based on Decision Tree and selected BikeBuyer as predictable column. 2. According to input column suggestions, I've selected Age, Eng.Education, NumberCarsOwned, YearlyIncome, CommuteDistance, NumberChildsatHome and TotalChildren as input columns, 3. I've modified no other setting, and deployed project.
I can get training results in decision tree browser and dependency network (and both seem to give rather logical results) however, when I try to browse lift chart or classification matrix I get an empty class.matr. and a lift chart of a single 45 degree line.
Am I missing a step, or must I do some fine-tuning on (what) parameters?
Hello. I hope to explain myself well - I want to make a matrix with two rows. Lats say my data is this: I hava a list of months and in every month I have a number of pepole and there age. How can I show this in a matrix? It need to be in a matrix since I need the columns to expand acording to the month but I don't know how to create two diffrent rows in my matrix.
I have a report thats fully functional. I just want to add a filter so that my "Visits" field only displays the Visits per day that are less then 6. When i try to filter out the matrix or the group, it tells me the datatypes are different . Something about int32. Its in a matrix, but i have seen this happen in a table too, so i guessing thats not the problem. I just want to be able to display the information for Sales Reps with less then 6 Visits. Any help, will be greatlly appreciated.
Adding more columns in a matrix report that don€™t belong to the columns drilldown dimensions€¦
That is, for example, having the following report:
Product Family
Product
Country City Number of units sold
Then I would add some ratios, that is, Units Sold/Months (sold per month) and other that is the average for Product Family (Units Sold/Number of Product Family), for putting an example€¦ some columns should be precalculated prior to the report so do not get into it, the real problem I don€™t see how to solve is adding one or two columns for showing these calculated column that doesn€™t depend on the column groups but they do for the rows groups€¦
Any guidance on that?
The only way I am seeing by now is to set it as two different reports, and that is not what my client wants€¦
I have a matrix in my report that is based on an MDX query. I copy-paste the matrix and then see the two matrices in the report and all is fine.
I then insert a group into the second matrix. When I run the report the second matrix appears as I would expect, but the cells are blank in the first matrix. Sometime all the data cells are blank, but not the totals.
I tried a similair thing with a table. I added a table based on the same MDX dataset and the cells in the matrix were also then blanked out.
I made sure that the matrices were not sitting on top of each or even in the same space.
The goal here is to show the same dataset but with different groupings. I thought of doing drilldowns, drillthroughs, etc. but this is the way they want to see the data.
Currently I report our monthly fees broken down into 4 weeks per month by using 4 separate datasets with the following code
SELECT SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT FROM Practice.ibvSalesByJob INNER JOIN Practice.idvJobType
[Code] ....
The second dataset then has the date code changed toÂ
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/08/' + Cast(@DateYear AS char(4)) + ' 00:00:01' AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The third
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:01' AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The fourth
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
Now I was hoping so that I could report the above data in one chart and do an expression on the category and group the dates so I would just have one dataset like below but four separate columns saying Week 1, 2 3 and 4 and then the sum filtered in line.
SELECT SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT FROM Practice.ibvSalesByJob INNER JOIN Practice.idvJobType
[Code] ....
If I could somehow with SQL tie in all 4 separate datasets and display them as Week 1, 2, 3 and 4 underneath the dataset and selectable.An even simpler solution maybe just understanding how charts work, I can get it so I display the 4 separate weeks in the chart however I can't get the bottom line (Category Group) to display Week 1, 2, 3 and 4.
I have this main chart setup. It pulls data from a query based on the selected parameters.
I want to create multiple charts for every catagory in the result set.
On the main chart there is a catagory called "Missing".
I want a chart for this category to display when the main chart is loaded. So below the main chart it would show a chart for each of the categories on the main chart.
Basically this report returns information on a certain part number displaying its problem types. Then I want it to create other charts for each problem type displaying the problem sub-types.
Ok, I am having a little trouble figuring out if this is possible...
At first it looked easy (It always does), but as I started messing with matrix groups, it seems that i cant be done in 1 matrix.
Here is the display I want:
Value 1 Value 2 Total
Period 1 Period 2 Var % Period 1 Period 2 Var % Period 1 Period 2 Var %
Row
Row
Row
Row
I was thinking of having 2 groups, and then add a column to the 2nd group to calculate the variance column, and have that total. I cannot seem to get it to do that.
This is the first time I have really pushed the matrix for more than the basics.
Is it possible to Add a cell in Matrix A to a Cell in Matrix B and output that value in Matrix C?
Question # 2:
Since I think the answer to #1 is NO, I'll ask this question.
I have a dataset which has duplicates which I can't seem to get rid of - I've tried the distinct keyword and it's a no go. Is there a way to SUM NON-DUPLICATE values in a matrix. I've seen the COUNTDISTINCT function, but I don't think that's going to help me.
I have a count (bookings.id) as nobookings in my query, which returns a count of all specific classes for a member. In the matrix i have sum(fields!nobookings.value) which adds the bookings by class type (1 tennis, 2 golf, 3 cricket). Now i need the total of all classes by pmember (6 in this case). Can srs do this?
I am working on a sport site, where i have to create a Calender Like thing where i have to show which sport is avaible in which month, we can have any numbers of sports as the club grow it can add 100s of different sport to itself, so i was not able to understand how to make a database for this kind of thing, can anyone please help
Games - Jan Feb Mar Apr May Jun Jul …..Dec Cricket Yes Yes Yes No No No No ..... Hockey No Yes Yes No No Yes Yes ..... Horse R Yes No No No Yes Yes Yes .....
I am trying to sort a matrix by column. I first tried adding an interactive sort to the column heading, but it either gave me a run-time error, or there was not response. I then tried adding sorting to the row groups, and that doesn't seem to work either. I feel I have done every combination of groupings and sort expressions. Has anyone been able to accomplish this? Thanks, Kris
Is matrix reports in SSRS similar to the crystal cross tab reports, if so, I am trying to create my first report using reporting services in matrix report format, can you please send me a good reference I can use to create my first report. Thanks!
Hi All,I have the table as followscolumn1 ---------------------------------column2-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------column3-------3 -1.149,3.571,17.978,4.706,8.28,-5.988,-5.65,7.273,10,-7.975,0.617,-9.497,5.917,-1.744,-7.027,29.371,0,2.878,-2.113,0,-16.471,-10.526,-2.062,-2.513,-0.995,-12.987,0.435,4.072,12.183,-3.902,-4.651,25,-7.027,8.824,-15,-3.846,-4.587,-7.234,-5.242,16.432,0.472,-0.61832692307692316 1.649,2.768,3.474,-0.746,-0.186,1.129,-1.801,-0.46,5.634,1.429,0.995,-1.131,-2.959,1.946,3.266,0.404,2.588,-0.31,0.938,-0.26,-1.333,-1.215,-0.554,-1.194,-2.304,-0.223,1.576,-1.932,2.425,-4.67,0.617,0.333,0.962,-1.59,-0.066,3.575,-1.018,3.357,0.372,3.627,-10.28217307692307723 7.042,1.429,11.111,-13.103,-3.974,-1.948,6.207,2.113,-0.699,0.704,1.429,0,-2.098,2.143,0,1.449,-1.429,-6.667,13.636,-8.966,1.399,2.143,-9.091,-3.75,-5.882,10.39,-5.521,-13.757,2.717,-2.128,2.174,0,-8.911,12.222,-10,3.093,-3,7.527,0,-2.105,2.151,-7,-0.99,0,-0.53159615384615425 0.542,0.63,0.549,-2.148,4.534,0.13,2.436,-10.432,0.599,4.854,4.871,2.519,-3.306,5.362,-4.716,0.837,11.487,-5.869,-2.523,8.187,-6.087,-8.232,1.061,-6.914,-5.7,-5.058,-4.202,13.982,-1.559,4.282,-1.868,5.414,-4.728,-2.737,-2.592,-8.441,-2.091,-5.341,-1.516,4.-0.194057692307692From The above result pane i want to get a covariance matrix fromcolumn2 and column3.Here column3 can be be taken as "Mean"please help .It's an urgent deliverable.Immediate response is highly appreciated.
The problem that I have is that I can reference the total for the row: SUM(Fields!total.Value, "matrix_rpt_week") but I don't know how to reference the sub-total for the relevant group (eg London). Once I have this I can use it as the divisor in my calculation. I've tried using InScope but can't get it to return the value I need. Any ideas?
I wish to create a matrix with multiple rows in the main data cell and a subtotal at the end of the row. The first row in my matrix main cell is just a count of records, whereas the 2nd row is a % of the value in the 1st row compared to the total of that row. I have 5 columns in the matrix as below (ignore rounding issues):
Status A B C D E Total
01/01/2007 Number 9 32 3 13 0 57
% of Total 15% 56% 5% 24% 0.00% 100.00%
Can someone advise the best way to calculate the % cells in this example?
I have a view that gives me the following information from some tables.
Cust # Cust Name Date Order Type
001 John Doe 20070401 OR1
002 Miss Doe 20070401 OR2
001 John Doe 20070402 OR2
002 Miss Doe 20070402 OR2
What I would like to do is set up a matrix type report. The report is by the last 6 rolling order dates, with some % columns. So two row examples might be
Cust# Cust Name 20070401 20070402 % (of last x = OR1) %(of last x = OR2)
001 John Doe OR1 OR2 50% 50%
002 Miss Doe OR2 OR2 0% 100%
Another column just like the last two % based off a 3rd type, and finally a total % column that simply adds the 3 columns up (should always equal 100%, just an error check)
First, can this be done with a matrix? I tried a table but it lists cust# twice, but I can be doing it wrong. I am ok doing this within the query if need be, if someone gives me a hint how
I developed a matrix SSRS report for a specific scenario, and the results look something like the example below. The result set is grouped by the date value, so for all records on that date in the first column I have just one value - 2/5/2007. The client would like to see a value for each cell in every row in the date column, so they can sort the results and do other manipulation in Excel. I tried to make it happen but I doesnt seem to work using the matrix. I would really appreciate if anyone has any suggestions on how to make it work. btw, it really has to be a matrix report :)
I am trying to base a matrix on the following SQL SELECT reftblTestTypes.TestTypeDescription, DATENAME(MONTH, tblTests.DateCreated) AS Month, COUNT(tblTests.TestId) AS TotalTests FROM tblTests INNER JOIN reftblTestTypes ON tblTests.TestTypeId = reftblTestTypes.TestTypeId WHERE (YEAR(tblTests.DateCreated) = 2008) AND (MONTH(tblTests.DateCreated) = 4) GROUP BY reftblTestTypes.TestTypeDescription, DATENAME(MONTH, tblTests.DateCreated) ORDER BY Month
This produces 3 rows: TestTypeDescription Month TotalTests Antibody Screening April 1 Crossmatch April 3 HLA Class 1 April 3
The data is correct from my examination of tblTests
The construction of the matrix is: =Fields!Month.Value =Fields!TestTypeDescription.Value =Fields!TotalTests.Value
When I preview the report all I see is:
April Antibody Screening 1
The Crossmatch & HLA Class 1 totals do not appear.
A warning message of: "[rsNonAggregateInMatrixCell] The Value expression for the textbox €˜textbox4€™ references a field outside an aggregate function. Value expressions in matrix cells should be aggregates, to allow for subtotaling." appears. textbox4 is the one populated by =Fields!TotalTests.Value
Ultimately the report will give totals for each month in a given year but I've restricted it to April whilst I get it working.
