ADO.NET Cannot Connect To SQL2k, But Query Analyzer Does
Dec 21, 2006
I have an ADO.NET (.NET 2.0) application that throws a connection exception when trying to connect to a SQL 2000 Standard server (despite what the message says about 2k5, which I assume is generic):
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
The strange thing is that I can connect just fine to this server (and run the stored procedure in question) using Query Analyzer from the client machine. I have double- and tripple-checked the credentials (and had someone else look too) and they are correct. I also checked telnet to port 1433 and it doesn't fail to connect. Ping is shut down at the firewall.
The connection string looks like this (basically):
Data Source=10.0.0.137;Initial Catalog=XXXXXX;uid=xxxxx;pwd=xxxxx
This is conecting to a remote instance across a couple firewalls. Both machines are Windows Server 2003. I don't have much more information about the SQL 2000 server machine, but the client machine is running plain vanilla server 2k3 with no third party software firewalls or a/v.
Has anyone run into this before? I know Query Analyzer and ADO.NET user different connection methods, but the permissions shouldn't be any different, right?
Thanks in advance.
--
Jeremy Wadsack
Seven Simple Machines
http://7simplemachines.com/
View 3 Replies
ADVERTISEMENT
Nov 19, 2004
We are having a problem with Query Analyzer not connecting to SQL Server anymore. Sometimes it will, sometimes it won't. Sometimes when it does, then you click on the databases drop-down, it may take a long time to return. Likewise, it may take a long time to open the object browser, or it may open without the database info but with just the "Common Objects" info.
All of this used to work just fine.
HELP
View 2 Replies
View Related
Feb 28, 2004
Does anyone know how to diable the File => Connect option in Query Analyzer?
Thanks
Clarification:
The situation is that I have several users on an application that controls their access to the DB. The user ID has full rights to the DB but the application stops them from making changes to data. Now I have a user that needs to be able to create and run SELECT statements in a “Query Analyser” type of environment. I can publish a Query Analyser session with locked credentials using Citrix, but I don’t want him to be able to use the File => Connect option to reconnect with one of the application Ids thus giving him full rights in an open environment.
Any ideas?
Thanks
View 1 Replies
View Related
Jul 23, 2005
Good day. I was able to connect to a database server using SQL ServerEnterprise Manager. The Server name specified on the tree isJOMARGON(Windows NT). But no server was detected using either VisualStudio .NET and SQL Server's query analyzer.I highlighted one database (master) on the SQL Server EnterpriseManager and chose 'SQL Query Analyzer' under the 'Tools' menu. Itworked. The Title of the Query Analyzer window isSQL Server Analyzer - [Query- JOMARGON.master.JOMARGONJM Gonzalezand below on the status bar, I can seeJOMARGON(8.0) and JOMARGONJM Gonzalez(52)But again, I cannot connect manually using Query Analyzer as nothing islisted in the SQL Server drop-down listThanks
View 3 Replies
View Related
Jul 23, 2005
MS SQL Server 2000 SP3Windows XP SP2Error when try to debug in Query Analyzer:Server: Msg 504, Level 16, State 1, Procedure sp_sdidebug, Line 1[Microsoft][ODBC SQL Server Driver][SQL Server]Unable to connect todebugger on HORNET (Error = 0x80070005). Ensure that client-sidecomponents, such as SQLDBREG.EXE, are installed and registered onEUGENE. Debugging disabled for connection 63.Tried:- 'Troubleshooting the Transact-SQL Debugger' ( Book on-line )- EXEC ... 'legacy_on'- firewall is disabledWhat else can be done ?Thanks , Eugene
View 1 Replies
View Related
Jan 24, 2002
Here is a strange one. Have a sql2k box that I upgraded from 6.5 back. Conversion went fine, everything was ok with the sql install. Created and scheduled maintenance jobs while logged on to the box. A few days after the conversion, Enterprise Manager cannot register the server(error message is 'Data source name not found and connection libraries do not exist'). This inablilty to register the server only occurs when working on the server itself. You can register the server while connecting from another box with EM.
So, do some checking and find that the box itself does not recognize SQLSRV32.dll (etc) as even existing on the box BUT IT DOES EXIST in the normal places, it was a working install just a few days prior. As far as the box is concerned, the network libraries do not exist. Therefore, cannot register the server locally, cannot create a Data Source using the SQLSRV32 driver, cannot start the Sql Server Agent(so no scheduled back ups, etc).
Went so far as to re install the connectivity and client tools, which did not fix the issue.
Does anyone have any ideas?
View 1 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Oct 12, 2007
The company for which I work did not have a DBA until I started a few weeks ago. Whoever installed SQL2K used the wrong CD so they have been running Personal Edition on their servers. I have installed a new SQL2K standard instance and have restored everything except the jobs and DTS packages. Can the msdb from the Personal edition be restored to the standard instance?
View 3 Replies
View Related
Mar 15, 2007
Is it possible to downgrade SQL from Enterprise to Standard Edition, or do you have to remove the previous installation (uninstall) and reinstall. Meaning you would also have to restore all user databases? Thanks.
View 1 Replies
View Related
Oct 18, 2006
Hi All,
One of my clients has installed SQL5K at their HeadOffice. However there are some production units are there running under SQL2K. We have one stored procedure which used to update the masters from HO to Units. Under SQL2K it was working fine, but when we run the procedure on HO under SQL5K, it returns the following error message.
**************************************
OLE DB provider "SQLNCLI" for linked server "charlie1" returned message "Unspecified error".
OLE DB provider "SQLNCLI" for linked server "charlie1" returned message "The stored procedure required to complete this operation could not be found on the server. Please contact your system administrator.".
Msg 7311, Level 16, State 2, Line 4
Cannot obtain the schema rowset "DBSCHEMA_TABLES_INFO" for OLE DB provider "SQLNCLI" for linked server "charlie1". The provider supports the interface, but returns a failure code when it is used.
*************************************
The above also ocurs when I simply issue the command :
SELECT * FROM [server2K].[Mydatabase].[dbo].[MyTable]
I've tried to add the server with "sp_addlinkedserver" it was added successfully. The login info is same across the servers.
Please help me out I am stuck badly.
Thanks
Raoshan
View 1 Replies
View Related
Feb 12, 2008
When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare @SniierId as uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare @SniierAlias as nvarchar(50)declare @AlwaysShowEditButton as bitdeclare @SniierName as nvarchar (128)/* Check access for Sniier */SELECT TOP 1 @SniierName = Sniiers.SniierName, @SniierAlias = Sniiers.SniierAlias, @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId
View 3 Replies
View Related
Aug 29, 2001
THis is so annoying. I have 3 ADO executes in my program. THe first one creates a view, the second one performs an outer join on that view and returns a result set, the third execute drops the aforementioned view. THe program that is using this is installed on about 200 computers scattered across Germany and Italy, all querying the same MSsql server 7.0. THe queries run quite quick when few users are actively using the program (after hours for example). however in the heat of the day performance goes up and down dramatically with identical queries taking from 1 to 20 seconds to return their result set. Now I initially thought 'bandwidth issue out of our server'. However I noticed that if I take those three queries and run them from the sql server enterprise manager( running on the same computer as the aforementioned program) then the queries run instantly and the data is in my result pane in less than 2 seconds ALWAYS....even when the program is dogging it with 20 second delays before the result set returns. I know it is hanging on the return of the result set as I put a stop after before each ADO execute in order to check which one was eating up my time. Why is there this dichotomy between running the queries from my enterprise manager versus running them from an ADO object. Both are using TCP/IP (no named pipes involved). I havent monkied with the attributes of the ADO result set so they are all set to default.
I have used the sql server profiler to trace these queries and they always run in less than 33 milliseconds. THe duration is also never more than 33 milliseconds. THis stinks of a network resource issue but what always leads me somewhere else is how consistent the performance of the enterprise manager is when it runs the exact same three queries.
Here is my slightly edited connection string
Public Const connection_string = "Provider=SQLOLEDB;Server=000.000.000.000;" & _
"User ID=johndoe;Password=janedoe;Network=dbmssocn;" & _
"database=fidojoe"
Here are the 3 ADO executes:
conn.Execute (sqlstr_create_view)
Set resultset1 = conn.Execute(sqlstr_get_providers_by_DMISID)
conn.Execute (sqlstr_drop_view)
View 3 Replies
View Related
Feb 25, 2012
When I run query in excel it gives result with different column sequence. The same query gives result with different column sequence when used in query analyzer or VBA Macro. E.g., Select * from ABC.
result in Excel 2003 SQL OLE DB query
col-A col-B col-C
values...
Result with Query Analyzer and VBA Macro
col-c col-B col-A
values...
View 3 Replies
View Related
Apr 9, 2006
I hope I am not asking about something that has been done before, but Ihave searched and cannot find an answer. What I am trying to do is torun a query, and then perform some logic on the rowcount and thenpossibly display the result of the query. I know it can be done withADO, but I need to do it in Query Analyzer. The query looks like this:select Varfrom DBwhere SomeCriteriaif @@Rowcount = 0select 'n/a'else if @@Rowcount = 1select -- this is the part where I need to redisplay the resultfrom the above queryelse if @@Rowcount > 1-- do something elseThe reason that I want to do it without re-running the query is that Iwant to minimize impact on the DB, and the reason that I can't useanother program is that I do not have a develpment environment where Ineed to run the queries. I would select the data into a temp table, butagain, I am concerned about impacting the DB. Any suggestions would begreatly appreciated. I am really hoping there is something as simple as@@resultset, or something to that effect.
View 6 Replies
View Related
Aug 8, 2007
Hi, I need help. Understatement of the year right now, too =
So... I've created a stored procedure that partially pulls a SQL union query to give me a complete one-line result set of a bunch of data... four separate selects comprise the query.
The tables are structured identically to each other, but the values being pulled are specific and distinct. All of the non-date values stored are varchar values in the tables, and yet when I execute the SQL union query, I get the error message: Syntax error converting the varchar value to a column of data type int.
I know SQL does implicit conversions, however Im not sure why it's trying to do that with this query, I suppose. it should have been straightforward.
Any suggestions? Here is the query logic to look at, in case I'm missing the obvious
exec('
SELECT ACCOUNT, LNAME, FNAME, SEX, DOB, cast(MA_ContentValue as decimal) as MA_ContentValue, cast(MA_DOS as smalldatetime) as MA_DOS,cast(LDL_ContentValue as decimal) as LDL_ContentValue, cast(LDL_DOS as smalldatetime) as LDL_DOS, cast(HgbA1C_ContentValue as decimal)as HgbA1C_ContentValue, HgbA1C_DOS, cast(Creatinine_ContentValue as decimal) as Creatinine_ContentValue, Creatinine_DOS
FROM ( SELECT Account, Lname, FName, Sex, DOB,MA_ContentValue, MA_DOS, 0 as LDL_ContentValue, 0 as LDL_DOS, 0 as HgbA1C_ContentValue, 0 as HgbA1C_DOS, 0 as Creatinine_ContentValue, 0 as Creatinine_DOS FROM dbo.vwDiabetic_MicroalbuminTop3 UNION SELECT Account, Lname, FName, Sex, DOB, 0 as MA_ContentValue, 0 as MA_DOS, LDL_ContentValue, LDL_DOS, 0 as HgbA1C_ContentValue, 0 as HgbA1C_DOS, 0 as Creatinine_ContentValue, 0 as Creatinine_DOS FROM dbo.vwDiabetic_LDLTop3 UNION SELECT Account, Lname, FName, Sex, DOB, 0 as MA_ContentValue, 0 as MA_DOS, 0 as LDL_ContentValue, 0 as LDL_DOS, HgbA1C_ContentValue, HgbA1C_DOS, 0 as Creatinine_ContentValue, 0 as Creatinine_DOS FROM dbo.vwDiabetic_HgbA1CTop3 UNION
SELECT Account, Lname, FName, Sex, DOB, 0 as MA_ContentValue, 0 as MA_DOS, 0 as LDL_ContentValue, 0 as LDL_DOS, 0 as HgbA1C_ContentValue, 0 as HgbA1C_DOS, Creatinine_ContentValue, Creatinine_DOS FROM dbo.vwDiabetic_CreatinineTop3) tbl1
')
Anything else that I can provide for someone to help me? I appreciate any/all feedback!
View 11 Replies
View Related
Jul 20, 2005
After applying security patch MS03-031 (Sql server ver 8.00.818) aquery that used to execute in under 2 seconds, now takes over 8Minutes to complete. Any ideas on what the heck might be going on?I have tested this extensively and can say for certain that installingthis hot fix is what has caused the performance problem. I just don'tknow why or how to fix it.Brian Oster
View 3 Replies
View Related
Sep 17, 2005
I am trying to determine which of three stored procedure designs arefastest in the Query Analyzer:One query is a straight SELECT query with all desired rows and a dozen(tblName.RowName = @param or @param = Null) filters in the WHEREstatement.One query populates a #Temp table with the UniqueIDs from the resultsof the SELECT query in the above example, then joins that #Temp tableto get the desired rows.One query users EXEC sp_executesql @sql, @paramlist, @paramin which the @param has the dozen filters.What I'm trying to determine is which is the fastest.Each time I run the query in Query Analyzer it returns the samerecordset (duh!) but with much different Time Statistics.Are the Time Statisticts THE HOLY QRAIL as far as determining which isfastest, and what so I want to look at, the Vale or the Average? Inotice there are different numbers of bytse sen and bytes received foreach of the three queries.Any illumination on this is appreciated.lq
View 4 Replies
View Related
Sep 25, 2006
Hi there
Running query analyzer against two different server.
the first only need 1-2 secs to return the query result,
the other return 7-8 secs for the query result.
plz advice what could cause this slow performance?
thx
View 1 Replies
View Related
Aug 2, 2006
Is Query Analyzer being droped in MS-SQL 2005? I'm using Microsoft SQL
Server Managemant Studio and I couldn't find the Store Procedure node
and Query Analyzer anymore. Help is appreciated.
View 2 Replies
View Related
Aug 16, 2007
Say you have a state column with the name of a state in it. And you need to add a branchId to the table. I know I should not have it in there, and the application should use proper lookup tables, but that's not the case.
Can SQL Server query analyzer loop through and update the branchid field based on a lookup in a lookup table?
How would that be done?
View 3 Replies
View Related
Apr 4, 2008
Hi All,
I think I post this in a wrong section but I cant find forum for sql server and i just have a quick question
basically, I installed sql server 2005 and I need to debug a store procedure.1. Does query analyzer come with sql server 2005?2. If not how can I debug store procedure in sql server 2005?Thanks in advance
View 2 Replies
View Related
Mar 22, 2001
Does anyone know if there is a limitation in Query Analyzer in terms of the number of characters in a query that it will parse?
I am having a problem with some large queries, and I am not sure if it is Query Analyzer, or the SQL Server query parsing engine that is causing the problem.
The query just involves a simple SELECT statement, albeit for a large number of columns.
View 2 Replies
View Related
Aug 2, 2000
Hi,
I'm using SQL Server 7.0. I connect to one database in Query Analyzer and I can use the "Perform Index Analysis" option under the "Query" menu option. when I connect to one of our other databases, the "Perform Index Analysis" option under the "Query" menu option is disabled (greyed out). Does anyone know what the problem could be and how might I be able to enable this option.
Thanks in advance,
Darrin
View 1 Replies
View Related
Mar 8, 2006
Hello
In query Analyzer of SQL2000 when i select
2 Select Queries and Run it shows in same Window as 2 Grids
I have seen people using seperate grid option to view each query results in a Tab query results Pane in MSSQL 7.
Eg Select * from table1 (in one grid)
select * from table2 (in another grid)
like a TAB so that i can move from one tab to another.
Is it possible to do that in query Analyzer?
Regards
View 3 Replies
View Related
Jan 5, 2004
I would like to use the Query Analyzer to create a script that will prompt the user(dialog box) for a response in SQL Server 7.0. I found a post someone mentioned DBMS can return messages and using Query Analyzer.
Thanks for your help in advance.
View 3 Replies
View Related
Jan 17, 2006
I'm trying to do a couple of things with some different tables.
With the first table, I have first name and last name in two separate columns.
I'm trying to create a new ID column that would do the following.
Take the first 3 letters of the last name (and remove any non characters such as ',&) and the first 3 letters of the first name, and then combine them.
I know how to use substring to take the first three, and I know how to combine them, but I'm having problems removing the non alpha characters.
For example, if the columns looked as follows:
First Last
John O'Connor
I'd want the result to look like OCOJOH, however, I'm getting O'CJOH.
The second issue is how would I do something similar if the First and Last Name were in the same column and string.
For example, if the column looks as follows:
Name
John O'Connor Publishing
I'd like to pull the first 3 from the first string before the space and then the next 3 so it would be as follows:
JOHOCO
Finally, I want to compare these new IDs, and add numbers to them.
So if I had the following
First Last
John O'Connor
Johnny O'Connell
The first would be OCOJOH01
The second would be OCOJOH02
If there are not any duplicates with the new ID, I'd like to call it OCOJOH01 and then move on.
Any help/ideas would be greatly appreciated.
Thanks
View 8 Replies
View Related
Mar 29, 2006
Hi;
I would like to change the format of dates that is in colum using query analyzer. The name of the colum is StartD and this how they look: 3292006 I would like to insert the / / . Can someone show me how to accomplish it.
Thank you
View 10 Replies
View Related
Mar 19, 2007
I have a database with couple of store procedure and views.
Is there any way that i can find out all sp or views which contains word like *svc*. I am talking about the containt of the sp and views not name.
We are replacing one module so i have to change the all sp and views which use table or view start with svc.
Need help.
Thanks
View 3 Replies
View Related
Feb 21, 2007
in the market place that will run a query on multiple DBs acrossmultiple servers? Without having to manually connect to each server?If so, can anyone provide a link for it.Thanks
View 3 Replies
View Related
Aug 15, 2006
I am new to SQL and need help running a performance check on our companies dtabase. I use SQL Enterprise Manager 2000. Could someone please help me accomplish this?
Thanks,
Carl
View 3 Replies
View Related
Nov 26, 2007
hi everybody!
this is my first post, so I'd like to say hallo to everyone!
I "work" on SQL Server 2000, and I would like to ask you a question.
Is it correct that i cannot set a database user as database owner (using command sp_changedbowner 'user_name')?
QA returns this error message:
"Server: Msg 15110, Level 16, State 1, Procedure sp_changedbowner, Line 46
The proposed new database owner is already a user in the database."
so I have to use sp_revokedbaccess and then I can change the db owner.
why can't a db user be the db owner?
thanks for the answers!!
View 3 Replies
View Related
May 25, 2007
Hi,
Was wondering if anyone can tell me how to get the Query Analyzer Tool installed to WM6 Professional Emulator inside of VS05?
Thanks,
John.
View 3 Replies
View Related
Oct 18, 2007
Hello,
how is the query analyzer opening a database??? Does someone knows the command it uses to open the connection ??
I ask this because i have corrupted datafiles stored on a flash card which i can not open with connection.open but the analyzer opens them normally. After that i can open the datafiles using normal code
Does it use any special params?? I get the corrupted files on power down and after that i can not open them from my application. I can only do this after i open them once with the query analyzer
The database is about 20 MB stored on a flash card
Thanks in advance
View 1 Replies
View Related
