ADO Spoils Encoding
Mar 26, 2008The problem is: reading data with ADO is OK (Lithuanian), but when I try to write, most of national encoding goes to hell (plain ascii). What's wrong with it? I see no option to set code page.
View 2 Replies
ADVERTISEMENT
Encoding String From MS SQL
Apr 18, 2006Hi all,
I have an application which will send out email in plain text in multi langauage.the email content will be pull from txt file save in UTF-8.i can send out email from the template with the encoding. but when i insert data from the SQl server. the data from the SQL server are not encoded.how do i encode the data (in other lanagauge) from sql server into UTF-8 so that it can be send together with the template.
I have try changing the data into byte and encode it in UTF-8.but it won't displayed correctly. pls help. thanks
XML Encoding Types
Jun 12, 2006Hi,
I am getting this error: {"XML parsing: line 1, character 43, unable to switch the encoding"} System.Data.SqlClient.SqlException when I run the code below.
I know it is caused by the fact that the encoding of the XML file I'm trying to insert is not utf-16, but rather utf-8. However I would like to be able to enter any encoding. Is this possible?
If not is there a way to convert the encoding before I insert? Or any other ideas anyone might have. Thanks!
XmlDataSource xds = new XmlDataSource();
xds.DataFile = tbLink.Text.Trim();
xds.XPath = "rss/channel/item";
XmlDocument xmlDoc = new XmlDocument();
xmlDoc = xds.GetXmlDocument();
string strConn = WebConfigurationManager.ConnectionStrings["ConnectionString"].ConnectionString;
sqlComm.Parameters.Add(new SqlParameter("@XMLData", xmlDoc.InnerXml));
strSQL = " INSERT INTO tblCastStore ( intCastID, CastXML ) VALUES ( @@IDENTITY, @XMLData );";
sqlComm.CommandText = strSQL;
try
{
sqlConn.Open();
sqlComm.ExecuteNonQuery();
sqlConn.Close();
}
catch (SqlException se)
{
lblError.Text = se.Message;
}
BARCODE 128 Encoding
Aug 23, 2006The following TSQL code will take a character string and perform the encoding that is necessary to generate a BARCODE 128 formatted string to be used with a BARCODE 128 font.declare @myString varchar(255)
select @myString = 'BarCode 1'
-- Define the string of characters that we'll need to pull the reference of
declare @asciiString varchar(255)
select @asciiString = ' !"#$%&''()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~'
select @asciiString = @asciiString + char(195) -- 0xC3
select @asciiString = @asciiString + char(196) -- 0xC4
select @asciiString = @asciiString + char(197) -- 0xC5
select @asciiString = @asciiString + char(198) -- 0xC6
select @asciiString = @asciiString + char(199) -- 0xC7
select @asciiString = @asciiString + char(200) -- 0xC8
select @asciiString = @asciiString + char(201) -- 0xC9
select @asciiString = @asciiString + char(202) -- 0xCA
-- Define the stop and start characters
declare @stopchar char(1)
declare @startchar char(1)
declare @spacechar char(1)
select @stopchar = char(206) -- 0xCE
select @startchar = char(204) -- 0xCC
select @spacechar = char(194) -- 0xC2
-- Define the final holding place of our output string
declare @finalArray varchar(255)
-- Define the variables that we'll need to be using
declare @checksumTotal int
declare @checksum int
select @checksumTotal = 104;
select @checksum = 0;
-- Start building our output
select @finalArray = @startchar
-- Loop through our input variable and start pulling out stuff
declare @position int
declare @thisChar char(1)
select @position = 1
while @position <= len(@myString)
begin
select @thisChar = substring(@myString, @position, 1)
select @checksumTotal = @checksumTotal + (@position * (ascii(@thischar)-32))
select @finalArray = @finalArray + @thisChar
select @position = @position + 1
end -- We've gone past the length now
-- Now we need to figure out and add the checksum character
select @checksum = @checksumTotal % 103
if @checksum = 0
select @finalArray = @finalArray + @spacechar
else
-- Barcorde array assumes 0 as initial offset so we need to add 1 to checksum
select @finalArray = @finalArray + substring(@asciiString, @checksum+1, 1)
-- Now we append the stop character
select @finalArray = @finalArray + @stopchar
-- The @final Array represents the barcode encoded string
select @finalArray
Hope it helps,
Dalton
Blessings aren't so much a matter of "if they come" but "are you noticing them."
Character Encoding
Mar 23, 2007Hi
I have a user who is using data from my database for a webportal. One of my tables had a field that was type NText. The technology he is using couldn't cope with NText so i changed the data type to nvarchar instead. The user is now getting some superfluous characters coming back as part of the data in the field e.g. '12
' where a space appears if looking at the data through something like Query Analyser. He was asking if I could change the character encoding to Unicode.
I thought that datatypes like Nvarchar were unicode anyway but I guess the fact that I changed the type might mean that I need to explicitly declare it as unicode. Does anyone know if this is the case?
thanks.
SQL Column Encoding
Feb 4, 2008Hi!
I'm pretty new in SQL and I'm kinda confused with the concept of encoding in SQL. I tried to read several article but there are still things that I don't understand.
I have a table with two columns and these column contain english and chinese character.
CREATE TABLE Names
(FirstName NVARCHAR (50),
LastName NVARCHAR (50));
The collation for both column is Latin1_General_BIN
My question is
1. Does all data that is saved in nvarchar column have the same encoding type which is UCS-2?
2. If a client application input a chinese character into the database table, what is the encoding type of that data? Is it UCS-2?
3. If a client application successfully enter chinese characters into database table and i want to display those chinese characters saved in the database into a web page, do i need to convert those chinese character from UCS-2 (Unicode) into Big-5 encoding?
Thanks
Characters Encoding
Jul 23, 2005Hello,in what code-page are characters stored in MSSQL tables?is it windows1250?--Chris
View 2 Replies View RelatedSQL 2000 And UTF-16 Encoding
Jul 23, 2005Hi all,I have an issue on querying against UTF-16 encoded characters inSQL2000 database: For example the "López" is saved into database as"López" (due to the UTF-16 encoding); somehow, when I query datawith conditions of "like 'lop%'" or "like 'Lóp%'", the row of Lópezwould not return.NOTE: the accent insensitive collation can not help in this case.Thank you,Albion(052X)
View 8 Replies View RelatedTDS And Character Encoding
Aug 30, 2007I've seen a dump of the TDS traffic going from my webserver to the SQLServer database and it seems encoded in Unicode (it has two bytes perchar). Seems it would have a huge impact on performance if ittravelled in one byte. Why might this be?rj
View 17 Replies View RelatedPACKAGE ENCODING
Jan 26, 2007Hi, a new (little..) problem with xml source.
I have to import large xml file in sql server and I use data transfer task and xml source.
The xml file are generated without specifing any encoding, and so I obtain many character error if i don't change the encoding.
When i put "by hand" (with a xml editor) in the xml file this encoding <?xml version="1.0" encoding="ISO8859-1"?>, the SSIS task works perfectly without any error.
So, i'm looking for a way to use this encoding without editing xml file (more than 500 mb...). the way that i can imagine are:
1) change the package encoding (but I haven't find this kind of settings)
2) change the xml source encoding (but I haven't find this kind of settings)
3) change the console chcp (normally i have 850, i have tested 1252 but without any success)
4) make a xml trasformation (but i don't know the best way); I've tried with XML task without any success...
could anybody help me?
thank you in advance
alessandro
Character Encoding
Apr 1, 2006Is there a way to change the character encoding (on the fly) of your results when you run a query, for example, from unicode to iso-8859-1?
View 1 Replies View RelatedCharacter Encoding Problem
Jan 23, 2007I'm storing data in SQL Server 2005 Express ntext fields. I've added <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> to the Master Page, but apostrophes and other characters are appearing incorrectly in the browser. For example, apostrophes are appearing as Æ. They seem to have changed to this when I upsized from Access to SQL Server (so I have Æ in the db field).The back-end of the site is still in classic asp, where I can set the CodePage to 65001 and the CharSet to utf-8, and everything appears fine there. What can I change in the ASPX to get characters to display correctly?
View 3 Replies View RelatedAccent Problem Not With Encoding
Feb 24, 2008My asp site is importing data from ms sql server ..the accents shows right in sql but when displayed they are missing ie ogadéro will look ogad?ro I tried posible charset utf-8 & iso-8859-1 but it didnt work ..when I reied to dispaly static accents it is fine ...So I am now suspecting that the lookup process from the sql removes the accents !!!
Any suggestion
[SQL] Central European Encoding
Mar 5, 2008Hello,I faced a problem while reading some strings from the database (SQL 2005). Some letters are encoded with html codes making the sorting really difficult. I tried to use IComparer objects with different CultureInfo information, but it doesn't do any good.I am quite new to the web development, so I don't really have any clue if there is a recommended and clean way of solving this problem. It could be that it's something really simple, but I only came up with an idea of search and replace in all strings. If possible, I would like to omit this. :) If not, please let me know.Thanks in advance.
View 1 Replies View RelatedHow To Change To Encoding Of In SQL 2000
Jun 30, 2004I found a problem that I want to input chinese to SQL2000. I have already change the data type to "ntext" and for the ASP webpage I have chose the encoding to "big5". But the problem is I can't insert chinese string to the database from ASP.
Can anyone help??
Thanks!!
OPENROWSET, Unicode And Encoding Scheme
Nov 14, 2007
I have an automated system, which keeps on collecting data and put them in a datafile with data delimited by tabs. This datafile will be sent to OPENROWSET and data gets inserted into the database. Recently I observed a situation in which a character(é) gets inserted as two characters(é) adn that is creating lot of problems. I was able to observe, the character é in UTF-8 gets changed to é in UTF-7 format.
This strange situation comes while inserted data into an nvarchar field. In the format(.fmt) file, which will be sent as one of the arguments to OPENROWSET, this field is specified as "SQLCHAR" datatype with collation SQL_Latin1_General_CP1_CI_AS.
My questions are,
1) In which codeset OPENROWSET reads the datafile? Is there any way to specify to OPENROWSET to read in a specific format(i.e. as Unicode data or non-unicode data etc.)?
2) Can we specify datatype as "SQLCHAR" and collation type as "SQL_Latin1_General_CP1_CI_AS", in format file, for unicode characters? If this is wrong,what is the alternate for Unicode characters?
3) Is there any other place the problem can be?
Thanks in advance.
CLR Function - Invalid Character In The Given Encoding
Dec 18, 2006Hello!
I wrote a CLR function, which is receiving some XML parameters. In certein situations it gives me the following error message:
Msg 6522, Level 16, State 1, Line 58
A .NET Framework error occurred during execution of user-defined routine or aggregate "svmScale":
System.Xml.XmlException: Invalid character in the given encoding. Line 1, position 27.
System.Xml.XmlException:
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.Throw(String res, String arg)
at System.Xml.XmlTextReaderImpl.InvalidCharRecovery(Int32& bytesCount, Int32& charsCount)
at System.Xml.XmlTextReaderImpl.GetChars(Int32 maxCharsCount)
at System.Xml.XmlTextReaderImpl.ReadData()
at System.Xml.XmlTextReaderImpl.ParseText(Int32& startPos, Int32& endPos, Int32& outOrChars)
at System.Xml.XmlTextReaderImpl.ParseText()
at System.Xml.XmlTextReaderImpl.ParseElementContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlTextReader.Read()
at System.Xml.XmlWriter.WriteNode(XmlReader reader, Boolean defattr)
at System.Data.SqlTypes.SqlXml.CreateMemoryStreamFromXmlReader(XmlReader reader)
at System.Data.SqlTypes.SqlXml..ctor(XmlReader value)
at UserDefinedFunctions.svmScale(SqlXml sql_problem, Boolean perChannel, Single x_factor, Single y_factor)
The call:
declare @data xml, @param xml
set @data = '<root>
<d>
<y>3.950000000000000e+002</y>
<v>3.896900000000000e+004</v>
<v>3.950000000000000e+002</v>
<v>0.000000000000000e+000</v>
<v>0.000000000000000e+000</v>
<v>0.000000000000000e+000</v>
<v>1.517142857142857e+001</v>
<v>1.027035714285714e+003</v>
<v>1.241071428571428e+000</v>
<v>5.185714285714286e+000</v>
</d></root>'
set @data = dbo.svmScale(@data, 1, 0.5, 0.5)
If I cahnage one of the zeros in the given tag, the error message disappears. If i cut the given tag, the error message disappears. If I cut the given tag, and then paste the previous one in place of it, the error message APPEARS. So my conclusion is, that any tag can be wrong on a specific position in the XML. This makes me wonder.
Another wonderfull thing is, that if I take this CLR function, and the same TSQL code, and I do run it on my notbook with my SQL Express, no error message. But if I try to use it on the server, with SQL 2005 it drops me this error message. The resulting XML is coming from an SELECT FOR XML AUTO, so i suspect it not having illegal characters inside. This is probably true, becouse the above replace procedure can make the message disapear.
The server:
Product: Microsoft SQL Server Enterprise Edition
Op System: Microsoft Windows NT 5.2 (3790)
Platform: NT INTEL X86
Version: 9.00.3027.00
Language: English (United States)
Memory: 4095 (MB)
Processors: 2
Collation: SQL_Latin1_General_CP1_CI_AS
Clustered: False
The notebook:
Product: Microsoft SQL Server Express Edition
Op System: Microsoft Windows NT 5.1 (2600)
Platform: NT INTEL X86
Version: 9.00.1399.06
Language: English (United States)
Memory: 1015 (MB)
Processors: 1
Collation: SQL_Latin1_General_CP1_CI_AS
Clustered: False
I would be very greatul for any suggestions.
Thanks
Arpad Varga
Issue With URL Encoding Report's Hyperlink Value.
Dec 12, 2005Hello,
View 8 Replies View RelatedStrip HTML Encoding Out Of A String In Sql Clr
Apr 3, 2008I am trying to do string scrubbing in a sql clr function, including removing certain HTML formatting. I would like to use HtmlDecode method, but it's my understanding that System.Web is not available for Sql Clr (without marking code unsafe - not an option for me as this is for an application we sell externally, and unsafe calls woudl not go over well with customers). Is there any class that IS supported for Sql Clr that exposes this functionality? Thanks.
View 10 Replies View RelatedEncoding Strings For INSERTS And UPDATES - Newbie
May 26, 1999Can someone point me to some code that properly prepares a string for an INSERT or UPDATE into a char or varchar column? I need to be able to handle single & double quotes and any other possible issues. thanks
View 1 Replies View RelatedUnable To Manipulate The Xsl Output Encoding Type.
Feb 7, 2007After generating one of my reports, I process the XML output through an XSLT stylesheet and export it to a text file. The issue is that after the export, the generated output text file begins with the special Byte-Order-Mark marker "EF BB BF" standard to Unicode files encoded in UTF-8, UTF-16 or UTF-32. I have explicitly set the attributes of the xsl output element to <xsl:output encoding="us-ascii" media-type="text/plain" method="text">, but it seems as though those are ignored when the output file is written. I cannot have these characters, because I am generating a fixed-width file for input into a legacy system.
Any suggestions or thoughts on what is causing the BOM to be written to my file, even though I have set the encoding to be different than UTF-8?
NText Column Text Encoding/decoding
Sep 19, 2007Hi,
I have a table column type as nText, however there are some Chinese character stored in that field and it is a messed up as it is not readable.
In my vb.net code, I did Convert to unicode by getting the byte of each character and encode it with UTF8 e.g:
Public Shared Function ConvertToUnicode(ByVal s As String) As String
' Convert To Unicode
Dim MyBytes As Byte() = Encoding.Default.GetBytes(s)
Dim GBencoding As Encoding = System.Text.UTF8Encoding.UTF8
Return GBencoding.GetString(MyBytes)
End Function
This works well but ,the problem is that it slows down the process quite alot, and I wonder are there any text encoding method I can use in SQL that can run when i do the SELECT Statement?
SELECT
Convert(MyNTEXTColumn)
....
something like that?
Thanks.
Jon
SQL Server 2012 :: Encoding With Single Apostrophes In FOR XML PATH
Oct 16, 2014Here is my problem:-
declare @test as varchar(32)
declare @test2 as varchar(32)
set @test='today''s problem'
set @test2='my <string> '
select @test as '@attribute' for xml path ('myrow')
select @test2 as '@attribute' for xml path ('myrow')
I want for xml path to correctly encode the single apostrophe as &apos but the single apostrophe doesn't get encoded. In the second example the greater and less than does get encoded.
Default Output Encoding For Management Studio 2005
Feb 26, 2008Hi All,
Not sure if this is the right place to ask but..
Our company has just migrated to 2005 from 2000. I've got Management Studio doing much of what I need it to do from the old enterprise manager (which I wish I could go back to).
My problem is this.
When saving CSV files from a script run inside Management Studio (ad hoc reports, custom queries, etc) the default encoding is to UNICODE. This produces files that excel doesn't handle very well (most of the people I'd be sending the results to would freak out when the CSV file doesn't appear as expected).
I've discovered that I can change the encoding to ANSI when I save the query but as it's a manual process I'm sure I'm going to get tired of it very quickly. I would really like to make ANSI encoding the default.
(at the moment and for the foreseeable future, we don't need the functionality that Unicode provides).
Anyone know how to do this -- I've tried searching the docs without success.
Thanks All,
Charlie.
-------------
Charlie
SSIS - UTF8 Flat File Encoding Problem
Feb 11, 2008I have an issue when generating a flat file with SSIS.
Here are the steps:-
1 .Create a a package and Data Flow task in it.
2. In the Data Flow Task, insert an OLE DB Source and a Flat File Destination
3. In the OLE DB Source , specify this query :- "select '000' as [record code]"
4. In the Flat File Desitnation, create a new Flat File Connection specify the path and choose Code Page "65001 (UTF8)"
5. I've specified the Data Type "Unicode String DT_WSTR" in the Advanced property
When I execute the task, I get this error :
[Flat File Destination [16]] Error: Data conversion failed. The data conversion for column "record code" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
I've also chosen the data type "Unicode Text Stream DT_NTEXT" and "string [DT_STR]" but I get errors such as :
"The code page on intup column [record code] is 1252 and is required to be 65001."
The Locale I am using is English(US).
Would be grateful if test can be done for all other data types such as int, datetime, float, decimal, uniqueidentifier, etc.
SSIS - UTF8 Flat File Encoding Problem
Feb 11, 2008I have an issue when generating a flat file with SSIS.
Here are the steps:-
1 .Create a a package and Data Flow task in it.
2. In the Data Flow Task, insert an OLE DB Source and a Flat File Destination
3. In the OLE DB Source , specify this query :- "select '000' as [record code]"
4. In the Flat File Desitnation, create a new Flat File Connection specify the path and choose Code Page "65001 (UTF8)"
5. I've specified the Data Type "Unicode String DT_WSTR" in the Advanced property
When I execute the task, I get this error :
[Flat File Destination [16]] Error: Data conversion failed. The data conversion for column "record code" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
I've also chosen the data type "Unicode Text Stream DT_NTEXT" and "string [DT_STR]" but I get errors such as :
"The code page on intup column [record code] is 1252 and is required to be 65001."
The Locale I am using is English(US).
Would be grateful if test can be done for all other data types such as int, datetime, float, decimal, uniqueidentifier, etc.
Thanks
Sona Rampall
How To Insert A UTF-8 Encoding Type Character Into A Sql Server Text DataType Field ?
Dec 4, 2007I want to insert a value which has the UTF-8 encoding into a field of the database which has the "text" data Type
but it saves like this : " ?????????????? "
I would be thankful if u tell me how should I save it ?
here is the SqlComand I wrote :
string comand = " Insert into Table1 ( title , Body ) values ( ' " + textBox1.text + " ' , ' " + textBox2.text + " ' ) " ;
Table1
=============
title nvarchar(1000)
body text
Reporting Services :: Can Change Encoding From UTF8 To SJIS In SSRS 2012?
Jul 14, 2015How to change encoding in SSRS from UTF8 to SJIS for export to CSV. Is it possible or not.
View 3 Replies View RelatedHow Can I Store Data ?(encoding And Data Type)
Oct 20, 2007hi my friends;i have got a problem.i thing you can help mea='x80x02}qx00(Kx02Kx03Kx04Kx06Kx05Kx07u. 'i want to store database but i don't know which encoding and dataytpepls help mesorry for my bed english...thanks all
View 3 Replies View Related