ADODB 2.8 - SQL Insert Statement - Using Parameters
Nov 20, 2007
Hi there,
I am trying to use the ADO technology within MS Access 2000. Basically I'd like to use parameters in a command object to insert a new record and get its newly inserted ID.
But instead of it it returns error:
Run-time error '-2147217900 (80040e14)
Must declare the scalar variable "@ii_file"
Isn't this varaible (and all the rest of variables) declared by setting a parameter ".Parameters.Append .CreateParameter("@ii_file", adVarChar, adParamInput, 255, Me.cbo_ii)
"?
I'd like to avoid using stored procedures in order to create the whole SQL statement from the client side.
Thanks!
Darek
Public Sub save_import()
Dim rs As ADODB.Recordset, cmd As ADODB.Command, rec_affected As Long
Set cmd = New ADODB.Command
With cmd
.ActiveConnection = ado_conn 'an existing connection
.CommandType = adCmdText
.CommandText = "insert into import_main (ii_file, id_file, oi_file, od_file, folder, import_desc, id_client,basis_of_study, id_is, project_leader, urisk_model_basis, as_at_date, extent_benchamark) " & _
"values (@ii_file, @id_file, @od_file, @od_file, @folder, @import_desc, @id_client, @basis_of_study, @id_is, @project_leader, @urisk_model_basis, @as_at_date, @extent_benchmark) " & _
"select @id_im = @@identity"
.Parameters.Append .CreateParameter("@id_im", adInteger, adParamOutput)
.Parameters.Append .CreateParameter("@ii_file", adVarChar, adParamInput, 255, Me.cbo_ii)
.Parameters.Append .CreateParameter("@id_file", adVarChar, adParamInput, 255, Me.cbo_id)
.Parameters.Append .CreateParameter("@oi_file", adVarChar, adParamInput, 255, Me.cbo_oi)
.Parameters.Append .CreateParameter("@od_file", adVarChar, adParamInput, 255, Me.cbo_od)
.Parameters.Append .CreateParameter("@folder", adVarChar, adParamInput, 1000, Me.txt_folder)
.Parameters.Append .CreateParameter("@import_desc", adVarChar, adParamInput, 255, Me.txt_import_desc)
.Parameters.Append .CreateParameter("@id_client", adBigInt, adParamInput, Me.cbo_client)
.Parameters.Append .CreateParameter("@basis_of_study", adVarChar, adParamInput, 255, Me.txt_basis_of_study)
.Parameters.Append .CreateParameter("@id_is", adSmallInt, adParamInput, Me.cbo_status)
.Parameters.Append .CreateParameter("@project_leader", adVarChar, adParamInput, 255, Me.txt_project_leader)
.Parameters.Append .CreateParameter("@urisk_model_basis", adVarChar, adParamInput, 1000, Me.txt_urisk_model)
.Parameters.Append .CreateParameter("@as_at_date", adDate, adParamInput, CDate(Me.txt_as_at_date))
.Parameters.Append .CreateParameter("@extent_benchmark", adVarChar, adParamInput, 1000, Me.txt_extent_benchmark)
.Parameters.Append .CreateParameter("@id_im", adInteger, adParamOutput)
.Execute rec_affected, , adExecuteNoRecords
If rec_affected > 0 Then
Me.cbo_import = .Parameters.Item("@id_im")
End If
End With
End Sub
View 3 Replies
ADVERTISEMENT
May 30, 2006
Trying to insert into a history table. Some columns will come fromparameters sent to the store procedure. Other columns will be filledwith a separate select statement. I've tried storing the select returnin a cursor, tried setting the values for each field with a separateselect. Think I've just got the syntax wrong. Here's one of myattempts:use ESBAOffsetsgoif exists(select * from sysobjects where name='InsertOffsetHistory' andtype='P')drop procedure InsertOffsetHistorygocreate procedure dbo.InsertOffsetHistory@RECIDint,@LOB int,@PRODUCT int,@ITEM_DESC varchar(100),@AWARD_DATE datetime,@CONTRACT_VALUE float,@PROG_CONT_STATUS int,@CONTRACT_NUMBER varchar(25),@WA_OD varchar(9),@CURR_OFFSET_OBL float,@DIRECT_OBL float,@INDIRECT_OBL float,@APPROVED_DIRECT float,@APPROVED_INDIRECT float,@CREDITS_INPROC_DIRECT float,@CURR_INPROC_INDIRECT float,@OBLIGATION_REMARKS varchar(5000),@TRANSACTION_DATE datetime,@AUTH_USERvarchar(150),@AUTHUSER_LNAMEvarchar(150)asdeclare@idintinsert into ESBAOffsets..HISTORY(RECID,COID,SITEID,LOB,COUNTRY,PRODUCT,ITEM_DESC,AWARD_DATE,CONTRACT_VALUE,PROG_CONT_STATUS,CONTRACT_TYPE,FUNDING_TYPE,CONTRACT_NUMBER,WA_OD,PM,AGREEMENT_NUMBER,CURR_OFFSET_OBL,DIRECT_OBL,INDIRECT_OBL,APPROVED_DIRECT,APPROVED_INDIRECT,CREDITS_INPROC_DIRECT,CURR_INPROC_INDIRECT,PERF_PERIOD,REQ_COMP_DATE,PERF_MILESTONE,TYPE_PENALTY,PERF_GUARANTEE,PENALTY_RATE,STARTING_PENALTY,PENALTY_EXCEPTION,CORP_GUARANTEE,BANK,RISK,REMARKS,OBLIGATION_REMARKS,MILESTONE_REMARKS,NONSTANDARD_REMARKS,TRANSACTION_DATE,STATUS,AUTH_USER,PMLNAME,EXLD_PROJ,COMPLDATE,AUTHUSER_LNAME)values(@RECID,(Select COID from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select SITEID from ESBAOffsets..Offsets_Master where RECID = @RECID),@LOB,(Select COUNTRY from ESBAOffsets..Offsets_Master where RECID =@RECID),@PRODUCT,@ITEM_DESC,@AWARD_DATE,@CONTRACT_VALUE,@PROG_CONT_STATUS,(Select CONTRACT_TYPE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select FUNDING_TYPE from ESBAOffsets..Offsets_Master where RECID =@RECID),@CONTRACT_NUMBER,@WA_OD,(Select PM from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select AGREEMENT_NUMBER from ESBAOffsets..Offsets_Master where RECID= @RECID),@CURR_OFFSET_OBL,@DIRECT_OBL,@INDIRECT_OBL,@APPROVED_DIRECT,@APPROVED_INDIRECT,@CREDITS_INPROC_DIRECT,@CURR_INPROC_INDIRECT,(Select PERF_PERIOD from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select REQ_COMP_DATE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PERF_MILESTONE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select TYPE_PENALTY from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PERF_GUARANTEE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select PENALTY_RATE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select STARTING_PENALTY from ESBAOffsets..Offsets_Master where RECID= @RECID),(Select PENALTY_EXCEPTION from ESBAOffsets..Offsets_Master where RECID= @RECID),(Select CORP_GUARANTEE from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select BANK from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select RISK from ESBAOffsets..Offsets_Master where RECID = @RECID),(Select REMARKS from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select OBLIGATION_REMARKS from ESBAOffsets..Offsets_Master whereRECID = @RECID),@MILESTONE_REMARKS,@NONSTANDARD_REMARKS,@TRANSACTION_DATE,(Select STATUS from ESBAOffsets..Offsets_Master where RECID = @RECID),@AUTH_USER,(Select PMLNAME from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select EXLD_PROJ from ESBAOffsets..Offsets_Master where RECID =@RECID),(Select COMPLDATE from ESBAOffsets..Offsets_Master where RECID =@RECID),@AUTHUSER_LNAME)select@@identity idgogrant execute on InsertOffsetHistory to publicgo
View 1 Replies
View Related
Nov 26, 2007
hi have written SSIS script and i am using script component to Row count below my code what i have written. and i am getting error below i have mention...after code see the error
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using System.Data.SqlClient;
using System.Data.OleDb;
[Microsoft.SqlServer.Dts.Pipeline.SSISScriptComponentEntryPointAttribute]
public class ScriptMain : UserComponent
{
IDTSConnectionManager100 connMgr;
OleDbConnection sqlConn = null;
OleDbDataReader sqlReader;
public override void AcquireConnections(object Transaction)
{
connMgr = this.Connections.MyConnection;
sqlConn = (OleDbConnection )connMgr.AcquireConnection(null);
//sqlConn = (SqlConnection)connMgr.AcquireConnection(null);
}
public override void PreExecute()
{
base.PreExecute();
/*
Add your code here for preprocessing or remove if not needed
*/
OleDbCommand cmd = new OleDbCommand("SELECT CustomerID,TerritoryID,AccountNumber,CustomerType FROM Sales.Customer", sqlConn);
sqlReader = cmd.ExecuteReader();
}
public override void PostExecute()
{
base.PostExecute();
/*
Add your code here for postprocessing or remove if not needed
You can set read/write variables here, for example:
Variables.MyIntVar = 100
*/
}
public override void CreateNewOutputRows()
{
/*
Add rows by calling the AddRow method on the member variable named "<Output Name>Buffer".
For example, call MyOutputBuffer.AddRow() if your output was named "MyOutput".
*/
System.Data.OleDb.OleDbDataAdapter oLead = new System.Data.OleDb.OleDbDataAdapter();
//SqlDataAdapter oLead = new SqlDataAdapter();
DataSet ds = new DataSet();
System.Data.DataTable dt = new System.Data.DataTable();
//DataRow row = new DataRow();
oLead.Fill(dt,this.Variables.ObjVariable);
foreach (DataRow row in dt.Rows)
{
{
Output0Buffer.AddRow();
Output0Buffer.CustomerID = (int)row["CustomerID"];
Output0Buffer.TerritoryID =(int)row["TerritoryID"];
Output0Buffer.AccountNumber = row["AccountNumber"].ToString();
Output0Buffer.CustomerType = row["CustomerType"].ToString();
}
}
}
}
the error
Script component has encountered an exception in user code
Object is not an ADODB.RecordSet or an ADODB.Record.
Parameter name: adodb
at System.Data.OleDb.OleDbDataAdapter.FillFromADODB(Object data, Object adodb, String
srcTable, Boolean multipleResults)
at System.Data.OleDb.OleDbDataAdapter.Fill(DataTable dataTable, Object ADODBRecordSet)
at ScriptMain.CreateNewOutputRows()
at UserComponent.PrimeOutput(Int32 Outputs, Int32[] OutputIDs, PipelineBuffer[] Buffers)
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PrimeOutput(Int32 outputs,
Int32[] outputIDs, PipelineBuffer[] buffers)
thanks
kedarnath
View 4 Replies
View Related
Jun 16, 2006
Hi Experts,
Im trying to insert a record from Excel [Sheet2$] from Range (A2) to Range (E2) into a table on MS SQL server:
But I get the following error:
Error-2147217900(The INSERT INTO statement contains the following unknown filed name:F1).
Here is the ADODB.Connection:
Sub DB_con1()
Dim cn As ADODB.Connection
Dim strSQL As String
Dim lngRecsAff As Long
On Error GoTo test_Error
Set cn = New ADODB.Connection
cn.Open "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=D:Book1.xls;" & _
"Extended Properties=Excel 8.0"
'Import by using Jet Provider.
strSQL = "Insert INTO [odbc;Driver={SQL Server};" & _
"Server=titan;Database=dev;" & _
"UID=sa;PWD=welcome1@].abk_import " & _
"Select * FROM [Sheet2$]"
Debug.Print strSQL
cn.Execute strSQL, lngRecsAff ', adExecuteNoRecords
Debug.Print "Records affected: " & lngRecsAff
cn.Close
Set cn = Nothing
On Error GoTo 0
Exit Sub
test_Error:
MsgBox "Error " & Err.Number & " (" & Err.Description & ") in procedure test of VBA Document ThisWorkbook"
End Sub
Thanks in advance for any help.
Regards,
Abraham
View 2 Replies
View Related
Dec 20, 2006
I have an application which runs successfully on a couple of my customer's machines but fails on a third. It seems to fail when opening the database:
Unable to cast COM object of type 'ADODB.CommandClass' to interface type 'ADODB._Command'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{B08400BD-F9D1-4D02-B856-71D5DBA123E9}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=false; Initial Catalog=lensdb;Data Source = SQL
Before I got this error I was getting another problem (sorry didn't make a copy of that error's text) that made me think that adodb.dll simply wasn't loaded/registered. I got rid of that error by copying my adodb.dll onto the third machine and running gacutil /i. There is now an entry in winntassemblies for adodb.
Just in case you think it could be an obvious registry problem: when I started getting the current error I thought that maybe the registry needed updating and I merged the following lines into onto the target machine (from my dev machine):
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}]
@="_Command"
[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_CLASSES_ROOTInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}TypeLib]
@="{EF53050B-882E-4776-B643-EDA472E8E3F2}"
"Version"="2.7"
[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}]
@="_Command"
[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}ProxyStubClsid32]
@="{00020424-0000-0000-C000-000000000046}"
[HKEY_LOCAL_MACHINESOFTWAREClassesInterface{B08400BD-F9D1-4D02-B856-71D5DBA123E9}TypeLib]
@="{EF53050B-882E-4776-B643-EDA472E8E3F2}"
"Version"="2.7"
but, no change alas.
All three machines are running Windows 2000.
Any advice would be appreciated.
Thanks in advance,
Ross
View 1 Replies
View Related
Nov 5, 2015
I've have a need with SQL Server 2005 (so I've no MERGE statement), I have to merge 2 tables, the target table has 10 fields, the first 4 are the clustered index and primary key, the source table has the same fields and index.Since I can't use the MERGE statement (I'm in SQL 2005) I have to make a double step operation, and INSERT and an UPDATE, I can't figure how to design the WHERE condition for the insert statement.
View 2 Replies
View Related
Apr 21, 2008
An insert statement was not inserting all the data into a table. Found it very strange as the other fields in the row were inserted. I ran SQL profiler and found that sql statement had all the fields in the insert statement but some of the fields were not inserted. Below is the sql statement which is created dyanmically by a asp.net C# class. The columns which are not inserted are 'totaltax' and 'totalamount' ...while the 'shipto_name' etc...were inserted.there were not errors thrown. The sql from the code cannot be shown here as it is dynamically built referencing C# class files.It works fine on another test database which uses the same dlls. The only difference i found was the difference in date formats..@totalamount=1625.62,@totaltax=125.62are not inserted into the database.Below is the statement copied from SQL profiler.exec sp_executesql N'INSERT INTO salesorder(billto_city, billto_country, billto_line1, billto_line2, billto_name,billto_postalcode, billto_stateorprovince, billto_telephone, contactid, CreatedOn, customerid, customeridtype,DeletionStateCode, discountamount, discountpercentage, ModifiedOn, name, ordernumber,pricelevelid, salesorderId, shipto_city, shipto_country,shipto_line1, shipto_line2, shipto_name, shipto_postalcode, shipto_stateorprovince,shipto_telephone, StateCode, submitdate, totalamount,totallineitemamount, totaltax ) VALUES(@billto_city, @billto_country, @billto_line1, @billto_line2,@billto_name, @billto_postalcode, @billto_stateorprovince, @billto_telephone, @contactid, @CreatedOn, @customerid,@customeridtype, @DeletionStateCode, @discountamount,@discountpercentage, @ModifiedOn, @name, @ordernumber, @pricelevelid, @salesorderId,@shipto_city, @shipto_country, @shipto_line1, @shipto_line2,@shipto_name, @shipto_postalcode, @shipto_stateorprovince, @shipto_telephone,@StateCode, @submitdate, @totalamount, @totallineitemamount, @totaltax)',N'@billto_city nvarchar(8),@billto_country nvarchar(13),@billto_line1 nvarchar(3),@billto_line2 nvarchar(4),@billto_name nvarchar(15),@billto_postalcode nvarchar(5),@billto_stateorprovince nvarchar(8),@billto_telephone nvarchar(3),@contactid uniqueidentifier,@CreatedOn datetime,@customerid uniqueidentifier,@customeridtype int,@DeletionStateCode int,@discountamount decimal(1,0),@discountpercentage decimal(1,0),@ModifiedOn datetime,@name nvarchar(33),@ordernumber nvarchar(18),@pricelevelid uniqueidentifier,@salesorderId uniqueidentifier,@shipto_city nvarchar(8),@shipto_country nvarchar(13),@shipto_line1 nvarchar(3),@shipto_line2 nvarchar(4),@shipto_name nvarchar(15),@shipto_postalcode nvarchar(5),@shipto_stateorprovince nvarchar(8),@shipto_telephone nvarchar(3),@StateCode int,@submitdate datetime,@totalamount decimal(6,2),@totallineitemamount decimal(6,2),@totaltax decimal(5,2)',@billto_city=N'New York',@billto_country=N'United States',@billto_line1=N'454',@billto_line2=N'Road',@billto_name=N'Hillary Clinton',@billto_postalcode=N'10001',@billto_stateorprovince=N'New York',@billto_telephone=N'124',@contactid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@CreatedOn=''2008-04-18 13:37:12:013'',@customerid='8DAFE298-3A25-42EE-B208-0B79DE653B61',@customeridtype=2,@DeletionStateCode=0,@discountamount=0,@discountpercentage=0,@ModifiedOn=''2008-04-18 13:37:12:013'',@name=N'E-Commerce Order (Before billing)',@ordernumber=N'BRKV-CC-OKRW5764YS',@pricelevelid='B74DB28B-AA8F-DC11-B289-000423B63B71',@salesorderId='9CD0E11A-5A6D-4584-BC3E-4292EBA6ED24',@shipto_city=N'New York',@shipto_country=N'United States',@shipto_line1=N'454',@shipto_line2=N'Road',@shipto_name=N'Hillary Clinton',@shipto_postalcode=N'10001',@shipto_stateorprovince=N'New York',@shipto_telephone=N'124',@StateCode=0,@submitdate=''2008-04-18 14:37:10:140'',@totalamount=1625.62,@totallineitemamount=1500.00,@totaltax=125.62
thanks
View 7 Replies
View Related
Apr 9, 2007
Hello
I have a problem with setting relations properly when inserting data using adonet. Already have searched for a solutions, still not finding a mistake...
Here's the sql management studio diagram :
and here goes the code1 DataSet ds = new DataSet();
2
3 SqlDataAdapter myCommand1 = new SqlDataAdapter("select * from SurveyTemplate", myConnection);
4 SqlCommandBuilder cb = new SqlCommandBuilder(myCommand1);
5 myCommand1.FillSchema(ds, SchemaType.Source);
6 DataTable pTable = ds.Tables["Table"];
7 pTable.TableName = "SurveyTemplate";
8 myCommand1.InsertCommand = cb.GetInsertCommand();
9 myCommand1.InsertCommand.Connection = myConnection;
10
11 SqlDataAdapter myCommand2 = new SqlDataAdapter("select * from Question", myConnection);
12 cb = new SqlCommandBuilder(myCommand2);
13 myCommand2.FillSchema(ds, SchemaType.Source);
14 pTable = ds.Tables["Table"];
15 pTable.TableName = "Question";
16 myCommand2.InsertCommand = cb.GetInsertCommand();
17 myCommand2.InsertCommand.Connection = myConnection;
18
19 SqlDataAdapter myCommand3 = new SqlDataAdapter("select * from Possible_Answer", myConnection);
20 cb = new SqlCommandBuilder(myCommand3);
21 myCommand3.FillSchema(ds, SchemaType.Source);
22 pTable = ds.Tables["Table"];
23 pTable.TableName = "Possible_Answer";
24 myCommand3.InsertCommand = cb.GetInsertCommand();
25 myCommand3.InsertCommand.Connection = myConnection;
26
27 ds.Relations.Add(new DataRelation("FK_Question_SurveyTemplate", ds.Tables["SurveyTemplate"].Columns["id"], ds.Tables["Question"].Columns["surveyTemplateID"]));
28 ds.Relations.Add(new DataRelation("FK_Possible_Answer_Question", ds.Tables["Question"].Columns["id"], ds.Tables["Possible_Answer"].Columns["questionID"]));
29
30 DataRow dr = ds.Tables["SurveyTemplate"].NewRow();
31 dr["name"] = o[0];
32 dr["description"] = o[1];
33 dr["active"] = 1;
34 ds.Tables["SurveyTemplate"].Rows.Add(dr);
35
36 DataRow dr1 = ds.Tables["Question"].NewRow();
37 dr1["questionIndex"] = 1;
38 dr1["questionContent"] = "q1";
39 dr1.SetParentRow(dr);
40 ds.Tables["Question"].Rows.Add(dr1);
41
42 DataRow dr2 = ds.Tables["Possible_Answer"].NewRow();
43 dr2["answerIndex"] = 1;
44 dr2["answerContent"] = "a11";
45 dr2.SetParentRow(dr1);
46 ds.Tables["Possible_Answer"].Rows.Add(dr2);
47
48 dr1 = ds.Tables["Question"].NewRow();
49 dr1["questionIndex"] = 2;
50 dr1["questionContent"] = "q2";
51 dr1.SetParentRow(dr);
52 ds.Tables["Question"].Rows.Add(dr1);
53
54 dr2 = ds.Tables["Possible_Answer"].NewRow();
55 dr2["answerIndex"] = 1;
56 dr2["answerContent"] = "a21";
57 dr2.SetParentRow(dr1);
58 ds.Tables["Possible_Answer"].Rows.Add(dr2);
59
60 dr2 = ds.Tables["Possible_Answer"].NewRow();
61 dr2["answerIndex"] = 2;
62 dr2["answerContent"] = "a22";
63 dr2.SetParentRow(dr1);
64 ds.Tables["Possible_Answer"].Rows.Add(dr2);
65
66 myCommand1.Update(ds,"SurveyTemplate");
67 myCommand2.Update(ds, "Question");
68 myCommand3.Update(ds, "Possible_Answer");
69 ds.AcceptChanges();
70
and that causes (at line 67):"The INSERT statement conflicted with the FOREIGN KEY constraint
"FK_Question_SurveyTemplate". The conflict occurred in database
"ankietyzacja", table "dbo.SurveyTemplate", column
'id'.
The statement has been terminated.
at System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
at System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
at System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
at AnkietyzacjaWebService.Service1.createSurveyTemplate(Object[] o) in J:\PL\PAI\AnkietyzacjaWebService\AnkietyzacjaWebServicece\Service1.asmx.cs:line 397"
Could You please tell me what am I missing here ?
Thanks a lot.
View 5 Replies
View Related
Jan 14, 2008
This problem is being seen on SQL 2005 SP2 + cumulative update 4
I am currently successfully using the output clause of an insert statement to return the identity values for inserted rows into a table variable
I now need to add an "instead of insert" trigger to the table that is the subject of the insert.
As soon as I add the "instead of insert" trigger, the output clause on the insert statement does not return any data - although the insert completes successfully. As a result I am not able to obtain the identities of the inserted rows
Note that @@identity would return the correct value in the test repro below - but this is not a viable option as the table in question will be merge replicated and @@identity will return the identity value of a replication metadata table rather than the identity of the row inserted into my_table
Note also that in the test repro, the "instead of insert" trigger actually does nothing apart from the default insert, but the real world trigger has additional code.
To run the repro below - select each of the sections below in turn and execute them
1) Create the table
2) Create the trigger
3) Do the insert - note that table variable contains a row with column value zero - it should contain the @@identity value
4) Drop the trigger
5) Re-run the insert from 3) - note that table variable is now correctly populated with the @@identity value in the row
I need the behaviour to be correct when the trigger is present
Any thoughts would be much appreciated
aero1
/************************************************
1) - Create the table
************************************************/
CREATE TABLE [dbo].[my_table](
[my_table_id] [bigint] IDENTITY(1,1) NOT NULL,
[forename] [varchar](100) NULL,
[surname] [varchar](50) NULL,
CONSTRAINT [pk_my_table] PRIMARY KEY NONCLUSTERED
(
[my_table_id] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF, FILLFACTOR = 70) ON [PRIMARY]
)
GO
/************************************************
2) - Create the trigger
************************************************/
CREATE TRIGGER [dbo].[trig_my_table__instead_insert] ON [dbo].[my_table]
INSTEAD OF INSERT
AS
BEGIN
INSERT INTO my_table
(
forename,
surname)
SELECT
forename,
surname
FROM inserted
END
/************************************************
3) - Do the insert
************************************************/
DECLARE @my_insert TABLE( my_table_id bigint )
declare @forename VARCHAR(100)
declare @surname VARCHAR(50)
set @forename = N'john'
set @surname = N'smith'
INSERT INTO my_table (
forename
, surname
)
OUTPUT inserted.my_table_id INTO @my_insert
VALUES( @forename
, @surname
)
select @@identity -- expect this value in @my_insert table
select * from @my_insert -- OK value without trigger - zero with trigger
/************************************************
4) - Drop the trigger
************************************************/
drop trigger [dbo].[trig_my_table__instead_insert]
go
/************************************************
5) - Re-run insert from 3)
************************************************/
-- @my_insert now contains row expected with identity of inserted row
-- i.e. OK
View 5 Replies
View Related
May 26, 2006
Hi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
View 10 Replies
View Related
Oct 20, 2014
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
View 1 Replies
View Related
Aug 24, 2005
I have a sql that I want to execute with LIKE and parameters:I tried several options outlined that I found at http://aspnet101.com/aspnet101/tutorials.aspx?id=10%20but they all seem to return 0 records. When I try and execute my statement in Enterprise manager, it works fine.Code Snippet:...Dim sql as stringsql = "SELECT * FROM tblName WHERE First LIKE '%' + @fname + '%' AND Last LIKE '%' + @lname + '%'"Dim param(1) as sqlParametersqlParams(0) = New SqlParameter("@fname", SqlDbType.VarChar, 50)sqlParams(0).Value = Trim(fname.text)sqlParams(1) = New SqlParameter("@lname", SqlDbType.VarChar, 50)sqlParams(1).Value = Trim(lname.text)...Can anyone tell me if there is anything wrong with my code above?
View 8 Replies
View Related
May 27, 2008
Hi,
I have an issue with an OLE DB command and parameters. The statement I want to run starts with a WITH statement - when I take out the parameter it runs fine. When I take out the WITH statement and leave the parameter in it runs fine. When I run the statement in SSMS it runs fine.
With both the WITH statement and the parameter in it gives the error 'Syntax error, permission violation, or other nonspecific error'.
Has anyone seen this before?
View 2 Replies
View Related
Dec 7, 2006
The SQL for a dataset in ASP.NET 2.0 is as follows....
SELECT DISTINCT StudentData.StudentDataKeyFROM Student2Roster INNER JOIN StudentData ON Student2Roster.StudentDataRecID = StudentData.StudentDataRecIDWHERE (Student2Roster.ClassRosterRecID IN (@ClassRosterRecIDs)
ClassRosterRecIDs are giuds
At design time i use 'b2cf594d-908b-4c0c-a67f-6364899a4d42', '2e0b3472-d3f0-4a54-94af-bfc0a99525d9' as the parameter and it works in the designer but not at runtime.
At runtime I get the error Conversion failed when converting from a character string to uniqueidentifier.
If I leave the quotes off and only use 1 value like b2cf594d-908b-4c0c-a67f-6364899a4d42 it works.How can I use multiple guids as an IN parameter like 'b2cf594d-908b-4c0c-a67f-6364899a4d42', '2e0b3472-d3f0-4a54-94af-bfc0a99525d9'?
Thanks
View 2 Replies
View Related
Jul 20, 2005
Hei,I'm currently trying to write a program in C# that will allow users toparametrize their queries.For instance, I have a query like this:SELECT * FROM Customers Where Region = @Region AND Gender > @GenderHow can I extract the Parameters names without using Stringmanipulation (which is not perfect since sql statements can alsocontain '@' in LIKE clauses for example)I tried this wayDim comm As New OleDbCommand(SqlStatement, myCon)comm.Prepare()MsgBox(comm.Parameters.Count.ToString())comm.Dispose()myCon.Close()but this always return me 0 (zero)Do you have any idea on how to solve this generic problem?RegarsPhilippe Graca
View 3 Replies
View Related
Jul 12, 2007
Hi all of you,
I'd like to know how could I add parameters to CREATE TABLE from a Execute Sql Task.
Is it possible?
TIA
View 3 Replies
View Related
Jul 3, 2007
I have a report that is using a union statement to pull in data from two identical tables except that one is for current month, the other for archived data.
What I want to do is prompt the user once for a date and use the value to select from the right table. Since a sales date can only exist in one of the tables, one union will work, the other not.
But the report in prompting me for a parameter for each query....which is in Informix and the prompt is this: "?"
Is there anyway to force both halves of the query to see this as one parameter so the user is only prompted once?
Thanks
View 2 Replies
View Related
Aug 21, 2007
hello all, im trying to run a select statement using a parameter, but am having extreme difficulties. I have tried this about 50 different ways but i will only post the most recent cause i think that im the closest now than ever before ! i would love any help i can get !!!
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
Dim pageID As StringpageID = Request.QueryString("ID")
TextBox13.Text = pageID 'Test to make sure the value was stored
SqlDataSource1.SelectParameters.Add("@pageID", pageID)
End Sub
....
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ProviderName=System.Data.SqlClient ConnectionString="Data Source=.SQLEXPRESS;Initial Catalog=software;Integrated Security=True;User=something;Password=something" 'SelectCommand="SELECT * FROM Table1 WHERE [ClientID]='@pageID' ></asp:SqlDataSource>
The error that i am getting, regardless of what i put inside the ' ' is as follows:
"Conversion failed when converting the varchar value '@pageID' to data type int."
anyone have any suggestions ?
View 2 Replies
View Related
Jun 13, 2008
When I debug my code I see the string going into the parameter correclty, but the the delete statement doesnt work and I'm not sure why. Does this look ok? // Set up SqlCommand, connection to db, sql statement, etc.
SqlCommand DeleteCommand = new SqlCommand();
DeleteCommand.Connection = DBConnectionClass.myConnection;
DeleteCommand.CommandType = CommandType.Text;
// Store Primary Key photoID passed here from DeleteRows_Click
// in a parameter for DeleteCommand
SqlParameter DeletePrimaryKeyParam = new SqlParameter();
DeletePrimaryKeyParam.ParameterName = "@PhotoID";
DeletePrimaryKeyParam.Value = photoID.ToString();
// Insert new parameter into command object
DeleteCommand.Parameters.Add(DeletePrimaryKeyParam);
// Delete row, open connection, execute, close connection
DeleteCommand.CommandText = "Delete From Photo_TBL where PhotoID IN (@PhotoID)";
Response.Write(DeleteCommand.CommandText);
// DeleteCommand.Connection.Close();
DeleteCommand.Connection.Open();
DeleteCommand.ExecuteNonQuery();
DeleteCommand.Connection.Close();
View 9 Replies
View Related
Sep 30, 2015
I have a table :
Person(Id bigint , FirstName nvarchar(50) , LastName nvarchar(50),Address nvarchar(100))
and I have a sp for search data in "Person" table:
CREATE PROCEDURE SelectPerson
@First nvarchar(50) = NULL,
@Last nvarchar(50) = NULL,
@Address nvarchar(100) = NULL
[Code] ....
And there exists 500 record in Person.
I execute SelectPerson by this code:
"
DECLARE@return_value int
EXEC@return_value = [dbo].[SelectPerson ]
@First = 'Ψ§Ω
',
@Last = NULL,
@Address= NULL
SELECT'Return Value' = @return_value
GO
"
but result don't has any rows.why?
View 9 Replies
View Related
Feb 23, 2007
In an OLE DB Source in an SSIS package, we are having difficulties using multiple parameters in a SQL statement.
Using a single '?' works fine, but I've read that when you want to map more than 1 parameter you should use 'Parameter0, Parameter1, etc'.
The problem is that when we use Parameter0 and Parameter1 and then try to map it, it says that the query contains no parameters.
Can anyone help with the correct way to use multiple parameters in a SQL query that's part of an OLE DB Source task?
Thanks,
Mike
View 15 Replies
View Related
Sep 29, 2005
Hi to allI wish to be able to have a standard select statement which hasadditional fields added to it at run-time based on suppliedparameter(s).iedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'selectp_full_nameif @theTest1='TRUE'BEGINother field1,ENDif @theTest2='TRUE'BEGINother field2ENDfrom dbo.tbl_GIS_personwhere record_id < 20I do not wish to use an IF statement to test the parameter for acondition and then repeat the entire select statement particularly asit is a UNIONed query for three different statementiedeclare @theTest1 nvarchar(10)set @theTest1='TRUE'declare @theTest2 nvarchar(10)set @theTest2='TRUE'if @theTest1='TRUE' AND @theTest2='TRUE'BEGINselectp_full_name,other field1,other field2from dbo.tbl_GIS_personwhere record_id < 20ENDif @theTest1='TRUE' AND @theTest2='FALSE'BEGINselectp_full_name,other field1from dbo.tbl_GIS_personwhere record_id < 20END......if @theTest<>'TRUE'BEGINselectp_full_namefrom dbo.tbl_GIS_personwhere record_id < 20ENDMake sense? So the select is standard in the most part but with smallvariations depending on the user's choice. I want to avoid risk ofbreakage by having only one spot that the FROM, JOIN and WHEREstatements need to be defined.The query will end up being used in an XML template query.Any help would be much appreciatedRegardsGIS Analyst
View 2 Replies
View Related
Jun 17, 2006
Hello, this is my code: SqlCommand cmd = new SqlCommand("INSERT INTO Users (Username,Password) " +
"VALUES ('@username','@password' ", new SqlConnection(my_ConnectionString));
cmd.Parameters.Add("@username", SqlDbType.NVarChar, 50).Value = txtUsername.Text;
cmd.Parameters.Add("@password", SqlDbType.NVarChar, 50).Value = txtPassword.Text
cmd.Connection.Open();
cmd.ExecuteNonQuery();
cmd.Connection.Close(); But in the database, the row inserted is exactly this:"@username" "@password"I mean, the parameters are not inserted :SPlease, tell me the error in the code...Thank you so much,Carlos.
View 2 Replies
View Related
Mar 14, 2007
I have a simple table Person (PersonID, PersonName, and PersonAge). PersonID is the primary key and it's also an identity field. Let me paste a sample code and I'll explain at the bottom what's happening. SqlConnection conn = new SqlConnection(@"Server=.SQLEXPRESS;Initial Catalog=Test;Trusted_Connection=True");
conn.Open();
try
{
SqlCommand cmd = new SqlCommand();
cmd.Connection = conn;
// delete all rows
cmd.CommandText = "DELETE FROM Person";
cmd.ExecuteNonQuery();
Response.Write("start... <br><br>");
// ad-hoc insert
cmd.CommandText = "SET IDENTITY_INSERT Person ON";
cmd.ExecuteNonQuery();
cmd.CommandText = "INSERT INTO Person(PersonID, PersonName, PersonAge) VALUES (5, 'John Smith', 20)";
cmd.ExecuteNonQuery();
cmd.CommandText = "SELECT SCOPE_IDENTITY()";
Response.Write("ID = ");
Response.Write(cmd.ExecuteScalar());
Response.Write("<br>");
cmd.CommandText = "SET IDENTITY_INSERT Person OFF";
cmd.ExecuteNonQuery();
// parameter insert
cmd.CommandText = "SET IDENTITY_INSERT Person ON";
cmd.ExecuteNonQuery();
cmd.CommandText = "INSERT INTO Person(PersonID, PersonName, PersonAge) VALUES (@PersonID, @PersonName, @PersonAge)";
p = new SqlParameter("@PersonID", 11);
p.Direction = ParameterDirection.Input;
cmd.Parameters.Add(p);
p = new SqlParameter("@PersonName", "Jon Doe2");
p.Direction = ParameterDirection.Input;
cmd.Parameters.Add(p);
p = new SqlParameter("@PersonAge", 21);
p.Direction = ParameterDirection.Input;
cmd.Parameters.Add(p);
cmd.ExecuteNonQuery();
cmd.Parameters.Clear();
cmd.CommandText = "SELECT SCOPE_IDENTITY()";
Response.Write("ID = ");
Response.Write(cmd.ExecuteScalar());
Response.Write("<br>");
cmd.CommandText = "SET IDENTITY_INSERT Person OFF";
cmd.ExecuteNonQuery();
Response.Write("<br>end.");
}
finally
{
conn.Close();
}
I'm basically trying to insert rows in the table in two ways: one is ad-hoc (hardcoded sql statement) and another using parameters. Using the ad-hoc method everything is OK. Whenever I use the "parameter insert" method I can not get back the ID using SCOPE_IDENTITY (I always get back a DbNull value, the data gets into the table just fine). I'm rather new to using parameters, so it's gotta be something very easy that I'm missing...
Thank you.
View 4 Replies
View Related
May 1, 2007
Is there a way to retreive the SQL Statement with the values from the parameters merged together? I know how to retreive the SQL Select Statement and the parameters separately but I need to retreive the final SQL.
For example:
SELECT name FROM employee WHERE id = @id
I would like to retreive from SQLDataSource
SELECT name FROM employee WHERE id = 1
Thank you
View 4 Replies
View Related
Mar 9, 2004
I have a user login scenario where I would like to make sure that they not only exist in the user table, but also make sure there account is "verified" and "active". I'm trying to return 3 output parameters. UserID, verified, active. Is this possible?
Do I need just a select statement to do this? What is the difference between the output and select statements?
Thanks in advance.
View 1 Replies
View Related
Jul 13, 2015
I need to run a different select statement based on the value of a parameter. Visual studio is not liking how I am formatting it.Β Β
SELECTΒ mc.CtrlID,Β mc.PrtfID, mc.PrtfTyp, mc.City, mc.STATE, mc.U_O_AND_M, mc.CHBBal,Β mc.IRG_Number, mc.PrtfName, mc.LnID,Β mc.UPB, mc.UPB_Master_Loan, aa.Prtf_FNMA_FHLMC_Other , aa.ReportingSummar
FROMΒ Β Β Β Β Β Β Β Β Β Β Β vw_XXX_GIAC mc
INNER JOIN vw_XXX_InvestorMatrix aa on mc.CtrlID = aa.CtrlID
WHERE
case when
@PortfolioID=1 THEN aa.Prtf_FNMA_FHLMC_Other ='FNMA'
@PortfolioID=2 THEN aa.Prtf_FNMA_FHLMC_Other ='FHLMC'
@PortfolioID=3 THEN aa.Reporting Summar ='FLOW'
END
View 2 Replies
View Related
Jul 20, 2005
I'm quite stuck with this:I have an import table called ReferenceMatchingImport which containsdata that has been sucked from a data submission. The contents ofthis table have to be imported into another table ExternalReferencewhich has various foreign keys.This is simple but one of these keys says that the value inExternalReference.CompanyRef must be in the CompanyReference table.Of course if this is an initial import then it will not be so as partof my script I must insert a new row into CompanyReference andpopulate ExternalReference.CompanyRef with the identity column of thistable.I thought a good idea would be to use an SP which inserts a new rowand returns @@Identity as the value to insert. However this doesn'twork as far as I can tell. Is there a approved way to perform thissort of opperation? My code is below.Thanks.ALTER PROCEDURE SP00ReferenceMatchingImportAS/*Just some integrity checking going on here*/INSERT ExternalReference(ExternalSourceRef,AssetGroupRef,CompanyUnitRef,EntityTypeCode,CompanyRef, --this is the unknown ref which is returned by the spExternalReferenceTypeCode,ExternalReferenceCompanyReferenceMapTypeCode,StartDate,EndDate,LastUpdateBy,LastUpdateDate)SELECT rmi.ExternalDataSourcePropertyRef,rmi.AssetGroup,rmi.CompanyUnit,rmi.EntityType,SP01InsertIPDReference rmi.EntityType, --here I'm trying to run thesp so that I can use the return value as the insert value1,1,GETDATE(),GETDATE(),'RefMatch',GETDATE()FROM ReferenceMatchingImport rmiWHERE rmi.ExternalDataSourcePropertyRef NOT IN (SELECT ExternalSourceRefFROM ExternalReference)
View 3 Replies
View Related
Apr 24, 2007
I have a sqldatasource in a wizard. When I click the finishbutton in the wizard I want to insert some values (from textboxes, dropdownlists in my wizard) into a mysql-database. For this I use parameters, I add some values in the design mode and some in codebehind. The parameters in codebehind are added perfectly but the other parameters in designmode (name, email) just inserts null. Why? My datasource: <asp:SqlDataSource
ID="dsInsert"
InsertCommand="INSERT INTO tbltest (name, email, city) VALUES (?name, ?email, ?city)"
runat="server"
ConnectionString="<%$ ConnectionStrings:conn %>"
ProviderName="MySql.Data.MySqlClient">
<InsertParameters>
<asp:FormParameter Name="?name" ConvertEmptyStringToNull="true" Type="string" FormField="name" />
<asp:FormParameter Name="?email" ConvertEmptyStringToNull="true" Type="string" FormField="email" />
</InsertParameters>
</asp:SqlDataSource> The codebehind: protected void finishButtonClick(object sender, EventArgs e) { dsInsert.InsertParameters.Add("?city", TypeCode.Int32, city.SelectedValue); dsInsert.Insert(); }
View 3 Replies
View Related
May 20, 2008
Hi All,
We got this little issue of passing around (updated and inserting) small dataSets (20-500 or so records) from fat clients to a remote server running .Net / SQL 2005.
Instead of trying to fudge the data and make updates in .Net, we just decided it would be a lot less nonsense if we just wrap up the dataSets in an XML string, have .Net just pass it thru as a parameter in a SP and let SQL parse it out using openXML. The data is small and server is low use, so I'm not worried about overhead, but I would like to know the best methods and DO's & Don'ts to parse the XML and make the updates/inserts....and maybe a few good examples. The few examples I've come across are kind of sketchy. Seems it's not a real popular method of handling updates.
Thanks in Advance,
Bill
View 5 Replies
View Related
May 18, 2008
I am having trouble returning the correct record with my stored procedure.
my problem is that i don't know how to structure the sql statement to do the following:
given a set of records that have the same loankey, i need to
1. find the record that has most recent date (lockExprDt)
2. for all records with that date, find the highest Lock Number (LockNo)
3. for the all the records with that date and that LockNo, find the highest extension number (Ext)
currently my sql statement returns a record that has the most recent date. i don't now how to write the sql to further define my query to return the record that has the most recent date with highest lock number, and finally the highest extension number.
any suggestions as to what i am doing wrong. below is my slq statement. please note that i need to add the sql that will query for the max LockNo, and max Ext. Any help is greatly appreciated. thx!
select a.loankey, a.lockrate, a.investor, a.price, a.ext, a.cost, a.lockno, a.lockstatus , CASE WHEN CONVERT(CHAR(8),a.lockdate,10)='12:00:00 AM' THEN NULL ELSE CONVERT(CHAR(8),a.lockdate,10) END as 'LockDate' , CASE WHEN CONVERT(CHAR(8),b.lockExprDt,10)='12:00:00 AM' THEN NULL ELSE CONVERT(CHAR(8),b.lockExprDt,10) END as 'LockExprDt' , Case WHEN CONVERT(CHAR(8),b.lockExprDt,10)>= CONVERT(CHAR(8),GETDATE(),10) THEN datediff(day, CONVERT(CHAR(8),GETDATE(),10), CONVERT(CHAR(8),b.lockExprDt,10)) ELSE NULL END as 'Days'
from cfcdb..locktable ainner join (select loankey, max(lockExprDt) as lockExprDtfrom cfcdb..locktablegroup by loankey) bON a.loankey = b.loankey AND a.lockExprDt = b.lockExprDt
where a.loankey = @LoanKey
View 6 Replies
View Related
Apr 6, 2007
I have a table which has a field called Org. This field can be segmented from one to five segments based on a user defined delimiter and user defined segment length. Another table contains one row of data with the user defined delimiter and the start and length of each segment. e.g.
Table 1
Org
aaa:aaa:aa
aaa:aaa:ab
aaa:aab:aa
Table 2
delim
Seg1Start
Seg1Len
Seg2Start
Seg2Len
Seg3Start
Seg3Len
:
1
3
5
3
9
2
My objective is to use SSIS and derive three columns from the one column in Table 1 based on the positions defined in Table 2. Table 2 is a single row table. I thought perhaps I could use the substring function and nest the select statement in place of the parameters in the derived column data flow. I don't seem to be able to get this to work.
Any ideas? Can this be done in SSIS?
I'd really appreciate any insight that anyone might have.
Regards,
Bill
View 23 Replies
View Related
Dec 27, 2000
I'm trying something like this:
CREATE PROCEDURE Add_Junk @Dist char, @CheckNo int =null OUTPUT AS
Set NoCount On
BEGIN TRANSACTION
INSERT INTO Junk (Dist)
VALUES (@Dist)
COMMIT TRANSACTION
select @CheckNo=@@IDENTITY
If what I pass is "416" I only get the "4" in my database and nothing else.
I don't get an error message.
What is wrong with my syntax?
PS I'm using Microsoft SQL 7.0
View 2 Replies
View Related
