The sample application provided with Access Database Synchronizer fires a "A request to send data to the computer running IIS has failed. For more information, see HRESULT." exception on my WinCE 4.2 device.
I debugged it with VS2005 to see what was going on and found that the problem resides in the line:
m_connDesktop.Pull("MSysObjects","SELECT Name FROM MSysObjects WHERE Type=1 and flags=0",accessSysConnectString,RDATrackOption.TrackingOff,"Err_MSysObjects");
It seems that connection m_connDesktop is ok but calling Pull method fails.
I've verified that SSEvAccessSync service is started when ActiveSync detects device connection and that firewall rules are correctly updated.
Also, i verified my System.mdw and i discovered that there is no "MSysObjects" table (only MSysGroupList, MSysGroupMembers, MSysUserList and MSysUserMemberships queries are there).
Do you think the problem is there?
How can i solve it without damaging System.mdw?
I cannot figure out what's the purpose of this line of code, can you help me?
Hi there,I sincerely hope that someone out there can help. I have twoinstances of the SQL 2000 Desktop Engine running. One is on my localmachine for development and the other is on another machine on ournetwork which is the production environment. I have built an Access2003 front end application which connects to this database. Thisworks fine locally, as you would expect. I successfully installed thedatabase on the production machine and am able to connect to it viaAccess 2003 (using the Data Link Properties window) and from thirdparty database manager software (similar to Enterprise Manager). I amnot able to to connect to the database via my application.I am using the "sa" account with a strong password. This is myconnection string:strConnection = "Provider=sqloledb;DataSource=server02;UserId=sa;Password=strong;Initial Catalog=Test"The error I'm getting is:"Connection cannot be used to perform this operation. It is eitherclosed or invalid in this context."The connection string is the only thing that changes in my code when Iswitch from my local to my production database. Is there some reasonthat I can't use the "sa" account in this fashion that I'm not awareof? I'd rather not use integrated security for simplicity's sake asthis is a small, internal application. Also, I would have thoughtthat if that was the issue, I couldn't use "sa" at all, even locally.I'm going to post to the Access group as well but thought someone heremight have some advice to offer as well.Thanks,Barb
I am thinking of using my web database as the database to use for my program, though not sure how feasible due to connection speeds and having to transfer that info.
what I am using as the connection string is
con.ConnectionString = "Data Source=databse ipadress inserted here; Initial Catalog=databasename here;Integrated Security=True"; with real data obviously inserted into the ip and tables, but when i try and send values there it just hangs and then crashes. I am thinking its not finding the database. Is there something else im to do?
I am using the exact same code as when i use my own machine as the server, and it works great that way, only thing different is the trying to send to the web server.
I am writing a Desktop application accessing a SSCE database. I am running Windows XP SP2, VS2005 SP1, and have SQLServerCE3.1 installed. Debugging the application shows that ds.m_spInit->QueryInterface() returns E_NOINTERFACE. I have checked that SSCE runtime library is installed, IDBCreateSession uuid exists in the registry and m_spInit.CoCreateInstance(CLSID_SQLSERVERCE_3_0) return S_OK. Can you suggest me what need adding/installing to get the CSession.Open(datasource) working?
Dear All, i have a question abt winCE 4.2 and SQL server CE. i am using VB.net of Visual Studio 2005 My platform is using a PDA with winCE 4.2 and SQL server CE. The Host program is using dbf files on desktop side.
I got a problem of how to sync / read the sql CE data from a windows application.
so, i wanna ask,
1. any method to access the data from winCE data by windows application? or can i convert the sdf file to windows readable files? or any others?
2. Can i use a MDB to sync with SQL server CE? can i synchronize the mobile device which has a SQL Server CE database with the Access database on the desktop?
last question, 3. is that windows CE .net 4.2 not support pocket access (cdb) anymore?
i have an application that uses sqlce.. now i want to install sqlce with my installer instead of seperate installer... could you please guide me how can i do this? i have created installer for my application but how to integrate sqlce with it...
I was thinking of replacing my desktop programs I do in Microsoft Access to SSEE. I am getting up to speed by some books and tutorials.
How would I distribute a program that has a SSEE database? I currently have in my application startup path a folder called "Database" that contains the .mdb, could I do the same thing with SQL Server. If so, what does that do to the connection string.
I am interested in synchronising 2 sdf files which are sitting on 2 different PDAs and I want to synchronise both of them with or without desktop application. C# applications are used to talk to the applications.
Is it possible or not and if possible how can i do that. Any code snippets or any links to similar forum posts or anything will be of great help. I am a C# programmer but not SQL Developer.
I was migrating one of my applications to VS.NET 2008 to start testing the new platform and encountered an error. One of my application requires the use of System.Data.SqlServerCe namespace to create a SQL Server CE database on a desktop machine.
The error is raised when I try to use a SqlCeCommand to insert rows in a table using parameters. If the order of the fields in the INSERT command does not match the order of the fields in which the table was created, an error is raised.
Investigating further, I noticed that the INSERT command was trying to insert the value of a parameter in an incorrect field. For example, the value for the field23 was being inserted into field22.
It looks like the SQL CE engine is rearranging the fields in the INSERT command to match the order of the fields in the table, but forgets to rearrange the parameters of the SqlCeCommand as well.
I give the example codes in the next posts. I will give it in both VB.NET and C#.
For both versions, you just need to create a Windows Application and add a reference to System.Data.SqlServerCe.dll. Insert the corresponding code into the Form1 partial class.
In the example, the constant RaiseError can be set to Boolean.True in order to raise the error. Set it to Boolean.False to execute correctly.
Am I correct in assuming that installing a SQL EE application on to a local runtime desktop would require a lot of experienced user intervention to install the SQL to each local cpu? Can a SQL app be installed automatically w/o a user intervening?
I am writing a Windows Application which will be used by about 100 clients. (NT Authenticated)
The application is going to be used in a LAN enviroment. User who have access will download a VB.NET application from a web site.
Of course, I want to prevent any of the 100 users from using a tool such as Query Analysis or ODBC to connect directly to the database and modify data.
So, it appears the way to go is to the "Application Roles". For this to work, the application roll password has to be saved in the application to execute the sp_setapprole procedure.
Is there a way to secure this password? I am worried about a user somehow extracting the password from the application and connecting directly.
Am I on the right track here? Any ideas appreciated!
I am nearing the end of creating my Windows App for work. So I tried to publish it, that was fine until I ran the app, from the same PC as I use to develop, with the same login etc. However when I use the published app I can't connect, to the database, return to VS2005 and run my app from within there and no problems. It is SQLEXPRESS (SQL Server 2005), but I have checked the settings there are correct (I assume VS wouldn't connect otherwise).
Server (Win2003) and my PC (Win2K) are on the same domain
Using TCP/IP
I can't see how to enable JiT debugging despite the 'help' at the end of this error details... See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) at TrainTrack.frmAddCompetency.frmAddCompetency_Load(Object sender, EventArgs e) at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Form.OnCreateControl() at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at System.Windows.Forms.Control.WmShowWindow(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.ContainerControl.WndProc(Message& m) at System.Windows.Forms.Form.WmShowWindow(Message& m) at System.Windows.Forms.Form.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
SQL Database in my application with windows authentication rejects accessing after deploying and remote access 1- My web applications databese access is windows authentication 2- In developing area there is no problem for accessing database 3- After deploying to another server there is problem accessing database: Cannot open user default database. Login failed.Login failed for user 'BRCK231ASPNET'. How can I solve this problem? Thanks.
I have used the Upsizing Wizard in Access 2003 to convert a database to SQL. When I open it using SQL 2000 Desktop edition, I am finding a problem with the views and stored procedures. When I open a query in design view, the tables are displayed in the upper pane without the details of the individual fields. All I get is a tick box next to *(All Columns) If I create a new table, the same thing happens. If I create a new database, then make a table within it, any queries behave normally, with all the fields displayed. I would be grateful for any ideas
I am developing a windows application that needs to communicate with a remote SQL server 2005 database. Server allows remote connections and MSDTC service also running. Do I need to run MSDTC service on the client machine where I use desktop application ? any ideas ? It's throwing some error like An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
But my SQL Server allows remote connection, and I am able to do a select statement. But when I insert/update anything, it's throwing this error. I guess some problem with MSDCT. Anybody have any idea ?
i am currently working on designing a database for a bank as a school project for my database class. We have to draw up an entity relationship diagram, Sql tables, database size estimate etc. I am currently working on the security portion of the project. I need to list the groups that have access to my application and use a grid format to show access to specific tables.
I am currently working on designing a database for a bank as a school project for my database class. We have to draw up an entity relationship diagram, Sql tables, database size estimate etc. I am currently working on the security portion of the project. I need to list the groups that have access to my application and use a grid format to show access to specific tables.
Role Loans Payments Transactions Accounts Customer Emplo Database Admin SUID SUID SUID SUID SUID SUID Branch Manager SUI SUI SUI SUI SUI SUI Internal Auditor S S S S S S Loan Officer SUID SUI SUI S S Tellers S S S S SU Customers U
I am developing an application that uses Access database (mdb file) to store the user data. The user of this application is not interested in the database file (to view in MS Access Environment). Does the user machine requires MS Access installation to run my application or just some couple of dlls (OleDB driver, Access DB Engine,..) should be enough to run my application?
Books online mention the existence of sample code for several custom tasks, including the one mentioned in the title. But, when I try to find this code in the location mentioned it is nowhere to be found.
I have run a search on the rest of my drive and come up empty.
Im trying to use VB.net 2005 to write a sample app to access a DB. Are there any samples for this and any samples of how I go about making the DB in the first place?
I'm looking for a sample database for a big company, organization,... to build my db project as a part of my db system courses. Can anybody help me? Thanks anyway.
i have a query that uses the adventure works sample database am working on sql server 2000 can i install this sample database to this sql2000 server? Best Regards
Hi im a beginner in SQL. I installed SQL Server Express on my computer, but i didnt find any databases included. The institute where i go to learn SQL have plenty of databases, but students usually work on databases called AdventureWorks and GlobalToyz. I searched the web for these databases and found something but i still cant figure out what to do with it. So i was hoping if anybody could send me these databases with brief instructions on how to install it into SQL Server. Thanks in advance
Hi, Can anyone tell me how i can access an application or open tables in MS sql server that are in MS Access. Its urgent and any help will be appriaciated.
Hi, I would create a vb2005 application that allow me to edit a sdf database stored into a pda connected at pc with activesyn directly on my desktop as well as "SQLCE Database View". How can i do it??
I hav emulator Windows CE 4.0 with Visual Studio 2003, C#.
I want connect to sql server 2000......after read all posts of this subject and try all varieties modes of connecting string.....in sql profile i see that application in emulator try to connect the sql server but i have the same exception :
I had installed the sample database " AdventureWorks ",but i couldn't find it in SQL Server Management Studio,and I noticed than it was installed into "Microsoft SQL Server 2005 Samples" directory,but not "Microsoft SQL Server" directory,what can I do to find the datebase. I am a beginner,and learning sqlserver by using tutorials,someone help me? many many thanks.
I install the SQL 2005 Evaluation. I selected to install samples and documentation during the installation wizard. It finished successfully but I could not find the sample databases on the SQL Management Studio. Why?
This question is for SQL Server 2000, SQL Server 2005, and SQL Server 2008.
I want to provide users a sample database with data and a database template which new databases created in an application will be based on. However, I don't want to use scripts to create database and other database objects and also don't want the data to be contained in other data store such as access database. I think about providing users with operating system files(mdf, ndf, log). My understanding is that database created thru attaching will follow the collation of the source. Is that a way to control the attaching so the database created thru attaching will follow the collation of the destination server?
If attaching is not a good way to handle my case, what are other possibilities?
I am dealing with an old ASP.NET 1.1 web app that I want to fix and update. The existing site has an SQL database on the web host's SQL server. I want to rip a complete copy of this database (it isn't large, only 9MB) onto my desktop computer, so I can alter it and "bench test" the changes I'm making to the overall application in VS2005.
Now, I have tried to yank a copy of this database and its structure using GUI programs like Visual Studio 2005, SQL Studio Manager Express, and EMS SQL Manager, none seem to offer a "Save As" option. While I can easily make changes to the database and its tables on the web host's server (sql.hostname.net) with no problem, I can't figure out how to pull a copy off of their server and onto my machine...
Does this problem have a very simple solution that I am overlooking?
