AFTER INSTALLATION PROBS.......HELP NEEDED
Oct 20, 2007
You notice after installing SQL Server 2005 that there is a warning message in the SQL Server log that SQL Server cannot lock pages in memory. What must you do to allow SQL Server to lock memory pages in memory?
After installing SQL Server, your customer complains that transactions are slow. You notice that there is excessive I/O in the TempDb. You want to move TempDb to another set of disks, so you have the sytem administrator configure two more logical disks on the server. What must you do to configure the SQL Server TempDb on this new set of disks?
You are instructed to install SQL Server in an Active / Active cluster environment. What two network related pieces of information must you have prior to performing the installation?
View 3 Replies
ADVERTISEMENT
Dec 28, 2006
I keep getting errors while trying to install SQL 2000 enterprise edition.....
Internal Error: Contact MS Tech Support
Help !!!
View 3 Replies
View Related
Jun 27, 2006
While installing J#, I also installed SQL Server 2005. Is this the same as the current SQL Server Express on the official website? If so, what should I download when I click one the "download now" link if I want all the best stuff shown there? If not, what do I download for the best stuff, too?
View 4 Replies
View Related
Jul 20, 2005
Hi Everybody,I am facing another probs. I have created a trigger for table Tab1 forperticular column col1 for checking value ranges.But at time for usinginsert statement it is working fine but when I am importing data fromflat file through DTS the trigger is not working.How to solve this.RegardsArijit Chatterjee
View 1 Replies
View Related
Oct 3, 2006
this is my first time using sql server, so i guess i'm def doing something wrong here..
my connection:
Code:
objConn = "Driver={SQL Server};Server=SHEMPCWEBSERVER;Database=aoms;Trusted_Con nection=yes;"
Set conn=Server.CreateObject("ADODB.Connection")
conn.Open objConn
Set rsLogin = Server.CreateObject("ADODB.recordset")
'Select the data from the database using the submitted data.
rsLogin.Open "SELECT * FROM tblUsers", conn
Response.Write rsLogin("fldUsrsName")
my error:
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e4d'
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'SHEMPCIUSR_XBOARDS-VRORER9'.
/aoms/testdb.asp, line 6
can anyone see what i'm doing wrong?
Thanks
Shem
View 2 Replies
View Related
Feb 13, 2008
Hello...
I am stuck with update statement...
I am having 3 tables abc,def and xyz...
i want to update column1 of abc with column2 of def values (here the probs is i dont have any common fields between them)
i am having common values between def(column10) and xyz(column10_new)
so i am using inner join something like below....
but this looks like wrong to me...bcoz when i do this (only select):
select column2 FROM def inner join xyz on def. column10 = xyz. column10_new
i am getting different as compared to the update below....
UPDATE abc
SET column1 = column2 FROM def inner join xyz
on def. column10 = xyz. column10_new
can anyone suggest how to solve this update???
Thanks
View 2 Replies
View Related
Jul 23, 2005
Hi Group,I am trying to display the multiplication through this way----------------------select 1163436036*100----------------------Getting the error============================Server: Msg 8115, Level 16, State 2, Line 1Arithmetic overflow error converting expression to data type int.============================For that reason I was tried to convert that to nvarchar------------------------select convert(numeric(36,2),1163436036*100)------------------------But still getting the error=============================Server: Msg 8115, Level 16, State 2, Line 1Arithmetic overflow error converting expression to data type int.=============================Please help me to solve it out..Thanks and RegardsArijit Chatterjee
View 3 Replies
View Related
Mar 1, 2007
Hi All,
I have this sql syntax which displays the records within the xml but instead of displaying 4 records (3 records relating to the last question ID) but instead resulting in only two records picking only the first options 'Unhelpful'.
Definitely doing something wrong here, please advise!
DECLARE @doc xml
SET @doc =
'<DivisionName>
<QuestInfo Custref="18759" SubDate="2006-01-01T00:00:00"
Polref="30018759" AgentID="4189" ClaimRef="14024-5647-890"/>
<DVName>Ho</DVName>
<DvcodeNo>1</DvcodeNo>
<ClaimGroup>
<CustSurveyNo>4</CustSurveyNo>
<ClaimGroupType>Water</ClaimGroupType>
<Questions>
<QuestionID>45</QuestionID>
<Answer>
<AnswerID>43</AnswerID>
<Ansoption />
</Answer>
</Questions>
<Questions>
<QuestionID>34</QuestionID>
<Answer>
<AnswerID>13</AnswerID>
<Ansoption>
<Options>Unhelpful</Options>
</Ansoption>
</Answer>
</Questions>
</ClaimGroup>
</DivisionName>'
DECLARE @docHandle int
EXEC sp_xml_preparedocument @docHandle OUTPUT, @doc
SELECT *
FROM
OPENXML(@docHandle, '/DivisionName/ClaimGroup/Questions/Answer/
Ansoption', 2)
WITH
(DVName varchar (20) '../../../../DVName',
DvcodeNo int '../../../../DvcodeNo',
CustSurveyNo int '../../../CustSurveyNo',
ClaimGroupType varchar (20) '../../../ClaimGroupType',
QuestionID int '../../QuestionID',
AnswerID int '../AnswerID',
Ansoption varchar (30)'Options')
EXEC sp_xml_removedocument @docHandle
View 1 Replies
View Related
Apr 19, 2004
Hi folks,
I got a strange Problem with this statement:
select * from [db1].[dbo].[table1] AS db1
INNER JOIN [db2].[dbo].[table1] AS db2
ON (db1.Text = db2.Text)
Text fields are both nvarchar(50)
I think this should work, but it doesnt?
I got a SQL Server Error 446
I know, text compares are not that good, but it exists no other way....
Thanks for any advice!!!
View 10 Replies
View Related
Nov 9, 2007
I have production server 2000. The server gets disconnected sometime by itself and sometime it is working fine.Sometimes it even doesn't get restarted. Is there any problem with service packs and some performance issues.
Can you SQL guru give me best suggestion and how should i proceed.
View 3 Replies
View Related
Jan 30, 2008
when i update i want only date portion tp be displayed from datetime datatype...
create table temp11 (datecolumn datetime)
insert into temp11 values (getdate ())
insert into temp11 values (getdate ())
insert into temp11 values (getdate ())
insert into temp11 values (getdate ())
now when i am running this query,i am getting what i want...
select convert (varchar, datecolumn,111) from temp11
but when i am tyring to update in the temp11 table using the below query...
update temp11
set datecolumn = convert (varchar, datecolumn,111)
i am getting date and time as well like...
2008-01-14 00:00:00.000
2008-01-14 00:00:00.000
2008-01-14 00:00:00.000
2008-01-14 00:00:00.000
i only want the date portion in my updated new table.....
any suggestions plzzzzzzzzz
is it poss thru any sql query???or shud be done in the front end only???
View 5 Replies
View Related
Jun 11, 2007
Hi All,
I've designed a simple sales report , first grouped by Transport type and then by item.
Example
Category Item Sales
DHL A 2000
DHL C 1500
DHL E -1700
AmEx A 200
Amex E 20
-------------------------------
when click on sales under group DHL it shouild sort -say descending-
so result should be
DHL A 2000
DHL C 1500
DHL E -1700
instead I get results
DHL A 2000
DHL E -1700
DHL C 1500
this is just an example but this is the sort of results I get when I try to use interactive sorting.
Any Ideas?
thanks
Sonny
View 5 Replies
View Related
Mar 22, 2001
Has anyone faced problems in calling one stored procedure from within another stored procedure ? I am considering using nested SPs, and would appreciate any inputs on it.
Thks,
SC
View 2 Replies
View Related
Jun 30, 2006
Hi All,
It would be great if anybody could help me how to write a T-SQL script to generate a report in spreadSheet from a table in SQLserver 2000 database.
And this report should be generated as per the following timings(Sheduled timings only).<script></script>
As well it should be able to send a mail regarding the availability of the report to user groups.
Incase if the generation of report fails then we need to send a mail reg the failure.
Any HELP is greatly appreciated!!!
Thanks in Advance!!!
Regards,
Sashi
View 1 Replies
View Related
Mar 28, 2007
Hi:
Am trying to import XLS data into SQL 2005 SP2 thro a SSIS Data Flow task. My Excel Connection string has IMEX=1, ImportMixedTypes is set to Text and the typeguessrows is set to 0.
Import works fine for cells of Format Text, but when I have a large number (in a general Format cell) it gets converted into scientific notation(e.g. 3.234175e+7) in the table.
What am I doing wrong?
TIA
Kar
View 2 Replies
View Related
Jun 26, 2006
Hi. I am trying to figure out the code for sorting a manual (non-identity) number column in my table. the purpose is to
show the user's pictures in perfect order (1,2,3,4,5,6...).
The Jist of my problem... When a user first inserts six pictures, he gets:
|1|
|2|
|3|
|4|
|5|
|6|
All is good. But, say he deletes picture |3|. Now the list order looks like this:
|1|
|2|
<- |3| is removed
|4|
|5|
|6|
And, then he inserts two more pictures, now he his this:
|1|
|2|
|4|
|5|
|6|
|7| <- |7| & |8| are added
|8|
What i want to acheive is a "reshuffling" of the number order every time a picture is removed. So, when |3| is removed, |4| becomes |3|, |5| becomes |4| and so on. There should never be a gap in the order.
I am new to stored procedures, and have been trying to figure this out. Below is my guesswork:
Code:
ALTER PROCEDURE dbo.sp_NewPersonalPic
(
@photo_name VARCHAR(50) = NULL,
@photo_location VARCHAR(100) = NULL,
@photo_size VARCHAR(50) = NULL,
@user_name VARCHAR(50) = NULL,
@photo_caption VARCHAR(150) = NULL,
@photo_default BIT = NULL,
@photo_private BIT = NULL,
@photo_number INTEGER = NULL,
@photo_date DATETIME = NULL
)
AS
BEGIN
SELECT @photo_date = CONVERT(DATETIME,convert(char(26), getdate(), 109))
END
BEGIN
SET @photo_number = 1
SELECT
@photo_number = (
SELECT COUNT(*)
FROM dbo.PersonalPhotos b
WHERE
a.photo_date < b.photo_date
)
FROM
dbo.PersonalPhotos a
ORDER BY
a.photo_date
END
BEGIN
My thinking is that it would be a safe bet to use the "photo_date" column as a litmus for my "photo_number" column (ie, the most recent record inserted by the user will always be at a later date than the previously inserted record). So:
photo_number photo_date
|1| 2006-06-26 21:43:36.653
|2| 2006-06-26 21:43:50.000
|3| 2006-06-26 21:45:25.217
|4| 2006-06-26 21:45:33.763
|5| 2006-06-26 22:39:42.670
|6| 2006-06-26 22:39:49.200
If |3| is removed above, the numbers are reordered based on the time of entry sequence.
Any suggestions on how to acheive this in my stored procedure? Currenly, i get the correct order, but it goes crazy when i delete and add.
Thanks and sorry for the verbose post.
View 5 Replies
View Related
Mar 9, 2013
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
View 14 Replies
View Related
Oct 2, 2005
I am trying to install SQL Server 2000 on a Win2K OS machine but Iget this error message:"A previous program installation created pending file operations onthe installation machine. You must restart the computer before runningsetup."I see others have had this problem but have fixed it using the solutionin:http://support.microsoft.com/defaul...kb;en-us;312995I have tried the solution but to no avail. The registry key:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lSessionManagerPendingFileRenameOperations keeps reappearing as soon as Iclose RegEdit.Any ideas?Thanks,lq
View 3 Replies
View Related
Jul 23, 2005
Please help,I am trying to install MSDE 2000 so that Backup exec will run on thisserver. I have gotten so far as to find an entry in my SQLSTP.TXT filethat says that c:mssql7 was detected so the install fails.Now, to start with there is no directory called C:mssql7 on thisserver. I have gone through all MS articles on manual removal of SQLserver and instances. I have searched the registry for mssql7 andremoved any keys that matched, as per MS article I have searched onSQLBOOT.dll and it is not present anywhere on my system and I still getthe same results.2:07:44 Begin Action: Detection12:07:44 SQL Server version already installed: 7.00.62312:07:44 Previous Install SQL Path: C:MSSQL712:07:44 Previous Install SQL Data Path: C:MSSQL712:07:44 End Action Detection12:07:44 Begin Action: ODBCLocked12:07:44 End Action ODBCLocked12:07:44 GetDefinition returned: 112:07:44 Previous SQL Server ProductType: MSDE [0x4]12:07:44 This combination of Package and Operating System allows a fullproduct install.can anyone think of anything here..what else could be causing the server to think there is a previousversion of SQL 7 on this box!!!?
View 1 Replies
View Related
May 3, 2006
I get an error when trying to install the SQL Native Client. It
says it cannot find the installation package and to use a valid copy of
'sqlncli.msi'. I've downloaded the Express setup twice and get
the same error from both of them.
I'm attempting this in a VMWare session setup for Windows 2K, Advanced
Server. I am trying to test my installation and setup
procedures. This is not a production setup, just install testing
and documentation. I have allocated only 272MB to the VMWare
session, which is why the system doesn't meet the recommended settings.
Any help would be greatly appreciated.
Below is the Summary.txt output file.
Microsoft SQL Server 2005 9.00.2047.00
==============================
OS Version : Microsoft Windows 2000 Advanced Server Service Pack 4 (Build 2195)
Time : Wed May 03 09:54:23 2006
CPCWIN2KVM1 : The current system does not meet recommended hardware
requirements for this SQL Server release. For detailed hardware
requirements, see the readme file or SQL Server Books Online.
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLSupport_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : SQL Native Client
Error : An
installation package for the product Microsoft SQL Server Native Client
cannot be found. Try the installation again using a valid copy of the
installation package 'sqlncli.msi'.
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server Native Client
Product Version : 9.00.2047.00
Install : Failed
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SQLNCLI_1.log
Last Action : InstallFinalize
Error String : An installation package for the
product Microsoft SQL Server Native Client cannot be found. Try the
installation again using a valid copy of the installation package
'sqlncli.msi'.
Error Number : 1706
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.2047.00
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_SqlWriter_1.log
--------------------------------------------------------------------------------
Machine : CPCWIN2KVM1
Product : MSXML 6.0 Parser
Product Version : 6.00.3883.8
Install : Successful
Log File : c:Program
FilesMicrosoft SQL Server90Setup
BootstrapLOGFilesSQLSetup0003_CPCWIN2KVM1_MSXML6_1.log
--------------------------------------------------------------------------------
View 4 Replies
View Related
Oct 2, 2006
Hi every one,
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
View 11 Replies
View Related
Sep 24, 2006
Im new to stored procedure, but here's what I want, if someone can get me started and provide this as an example it would be VERY welcome!I have the following, a SP with parameter IsMale. This parameter may be empty. If it's not empty I want to add some text to my selection query: AND IsMale=paramvalueHere's the SP so far:ALTER PROCEDURE [dbo].[spFindUsersAdvanced] --declare parameters here@IsMale bitASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; SELECT DISTINCT BirthDate,IsMale, FROM aspnet_Users INNER JOIN tblUserData ON aspnet_Users.UserId = tblUserData.UserID WHERE tblUserData.Username<>''IF @IsMale THENBEGIN AND IsMale='True'ENDELSEBEGIN AND IsMale='False'ENDEND IFEND1. How do I check if the parameter is empty?2. How do I add the text to my selection query?
View 3 Replies
View Related
Oct 30, 2007
Hi all,I am trying to write a stored procedure, which has two insert statements.the first insert statement, is simple which inserts data into a table and returns the primary key for the new row added. using this primary key, i am writing another insert statement, which passes a list of elements which would be then entered into another table, with the primary key of the first table.Is this possible to do in a single stored procedure? I have implemented this using two different sp, but am wondering if it can be done other way?thanks for your help!
View 10 Replies
View Related
Dec 1, 2004
Hi,
For many to many relationship, what is the minimum number of tables required.
View 1 Replies
View Related
Oct 17, 2005
Hi plz read below is my scenarioI have two diff tables which stores passwords (don't ask why b'coz it was there).Now to make data in both table consistance what I need to do?plz provide optimized solution.Thanks in advance.bye bye.happy coding!!!
View 1 Replies
View Related
Dec 20, 2000
Experts,
I've few questions regarding SQL Server. Appreciated, If any one out there help me with it.
I would like to do T-SQL Programing and would like to know some good book. I'll mostly be doing Stored procedures,Triggers and views programming. Any advice?
On my sql server I've 10 logins. But, I cannot view these logins from the Enterprise GUI. But, When i run a query against the syslogin table, those all 10 logins shows up. Why is that?
any help would be greatly appreciated.
View 1 Replies
View Related
Mar 25, 2004
Access 97.................
I'm trying to construct the following SQL statement but am missing something somewhere.
I get a syntax error with the 1st FROM highlighted.
If i construct a query out of the bit that works and then construct a query on that query then i can get it to work no problem but how to mimic that in SQL ? I can't simply view the SQL of the queries because the query names replace the SQL statements.
I'm trying to SUM the 5 volumes that get returned by the TOP 5 SQL statement. The VotingUniverse_TotalVolumeByType query returns the TotalVolume which will enable me to divide the SUMmed 5 volumes by the TotalVolume to obtain a %age.
SELECT
Type,
Sum(Volume) AS Volume,
TotalVolume
FROM
>>>>>>>>>>this following bit works............
(SELECT TOP 5
VotingUniverse_TopFirmsVolumeByType.Type,
VotingUniverse_TopFirmsVolumeByType.Volume
FROM
VotingUniverse_TopFirmsVolumeByType
WHERE
(((VotingUniverse_TopFirmsVolumeByType.Volume)
In (SELECT TOP 5 VotingUniverse_TopFirmsVolumeByType.Volume
FROM
VotingUniverse_TopFirmsVolumeByType
ORDER BY Volume DESC)))
ORDER BY
VotingUniverse_TopFirmsVolumeByType.Volume;)
>>>>>>>>>>>end of bit that works
INNER JOIN
VotingUniverse_TotalVolumeByType
ON
Type = VotingUniverse_TotalVolumeByType.Type
GROUP BY
Type,
TotalVolume;
hope this makes sense to someone anyway
thanks
====
Paul
View 5 Replies
View Related
Aug 15, 2002
I have a xxx.exe running on SQL 2000 server as a sql job every hour. For some reason this job sometime just hung in the middle and never finish. But
if I stop it and rerun it, it will be down within 10 seconds. I am wondering
if we can set up something so that the job aborts automatically if it ran more than 10 minutes.
View 1 Replies
View Related
Feb 22, 2001
Hi everyone.
We are running Sql 6.5 sp5 on a Pentium II 350 Mhz with 512 Mb. RAM, 1 ScSi 4 Gb hd, one 8Gb ScSi hd and 2 IDE hd (13,6 Gb and 8Gb) computer running windows NT 4.0 sp 6 without any problems.
Now have bought a new computer. The new one is a Pentium III 733 Mhz 512 Mb Ram with 2 ScSi ultra wide 2 18Gb each and one 40 Gb Ide Hd. We have installed windows NT 4.0 sp 6 and Sql 6.5 sp 5. We have restored our database to make some tests to it. The database is 7 Gb big.
The results of our test are that the old computer is between 20% and 30% faster than the new one when doing sql instructions and using the database even knowing that the hd´s of the new computers are 4 times faster than the old ones.
Would you please give us any help or clue that would make the new computer go faster?
We know that upgrading to sql 7 will work but we need first to make this computer work better with the 6.5.
Thank you.
View 3 Replies
View Related
Jun 18, 2004
Hello,
When I try to run my asp file it gives me this error. :mad:
Technical Information (for support personnel)
Error Type:
Microsoft OLE DB Provider for SQL Server (0x80040E07)
Syntax error converting datetime from character string.
/conOpen_inc.asp, line 10
Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)
Page:
GET /Default.asp
Anyone can tell me whats happening ? thank you
View 5 Replies
View Related
Oct 12, 2004
I often use DTS to move databases between the servers. When you choose "Transform" data and “Column Mappings and Transformation” window opens, the default option is “Append rows to destination table”.
Question: Is there a way to change the default option to “Delete rows in destination table”, so I wouldn’t have to go thru the transformation of dozens of tables every time I move databases around.
P.S. I know that I can save DTS package with my settings and use it later. The problem is that every time it might be different database or objects might change. So, it is not a solution for me.
Thanks
View 8 Replies
View Related
Jul 25, 2007
Dear All,
I have a client requirement. We are integrating two applications. So the problem is that, whenever some updates (meaning to say "create" , "delete" , "update") happens in the SQL DB Tables, i needed to track that data and send it to a different system.
What I have thought abt is that if SQL could generate a file with all the values deleted/updated/created in the DB, then I could take those values and do the needful. Please help me..
Thanks,
Sanjo
View 2 Replies
View Related
Feb 28, 2004
Hello guys,
I'm new to the forum and to MS SQL 2K.
I'm trying to a merge similar rows in a table into a single row and put them in a new table.
Example:-
This is my input table
TableA
ID A B C
------------------------
1 jk kl bj
2 sd we op
3 io po kl
1 ui gh ew
2 kl re op
1 qw kj nn
My output table should look like this
TableB
ID A1 B1 C1 A2 B2 C2 A3 B3 C3
-----------------------------------------------------
1 jk kl bj ui gh ew qw kj nn
2 sd we op kl re op
3 io po kl
Please help me on how to create my output.
Thanks in advance,
Sid.
View 11 Replies
View Related
