We now have both the 32 and 64 bit odbc driver. We installed V5R4 of client access. But SSIS doesn't seem to see the 64 bit ODBC(DSN I set up) it is only showing me the 32 bit(DSN that I set up). Is this a limitation within SSIS?
Hi,
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Any help will be appreciated.
Thanks,
vtluu.
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
Thanks!
Dan <><
i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below.
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
What is the most current ODBC driver version for SQL 7.0? Also is there a link to Micrsoft's site where this can be found?
View 3 Replies View Relateddoes anyone know where i can find an ODBC sql7.0 vers. 3.70.06.23 installation routine?
View 1 Replies View RelatedHi,
Do we have Microsoft ODBC Driver for DB2?. If we do then how we can get?.
Thanks,
Ravi
Hello,
I would be grateful if you could show me where I can download SYbase ASE ODBC Driver. I have searched almost the whole WEB for it but so far to no avail.
Thanks in advance.
Albert
In moving from odbc driver 2.65 to 3.6, we are getting a new error message.
'Unable to connect to data source xxxxx. Your user name or password may be incorrect.'
[Microsoft][ ODBC Driver Manager] Driver does not support this function. Has anyone else
had this problem? Thanks for any assistance. Karen Suenram
I have just restored a database which is quared thru a program written in visual basic. I need to set up the ODBC data source on the workstations and keep getting the error Sql server Error:4064 can not open user default database. Any ideas? also when you restore a database do the users & permissions come with the restore?
View 1 Replies View RelatedHi,
I am presently using Client Access ODBC driver (32-bit) to connect to the AS400. I have set up a linked server that enables me to run queries against the AS400 using the driver. However I seek to have a driver that could give better performance. Right now I can extract 6 million rows from the AS400 table in like 2 hrs. Now is there an ODBC driver that can do better than that? Also I seek an evaluation edition of the driver if possible. Moreover I am the only developer and so a single user license is what I can have my supervisor budget.
Thanks,
Vivek
Hi,
I have the following requirement :
I need to have a way to intercept the SQL queries from an application written in VB and using a ODBC driver and modify the SQL queries before it goes through the ODBC driver and then to the database. This I need to do without modifying the original application.
The solution I have in mind is to write a ODBC virtual driver and configure my application to use my virtual ODBC driver. The ODBC virtual driver in turn will use the actual ODBC driver to the database. The virtual driver will basically intercept the SQL queries, modify it and then give it to the real ODBC driver.
My question is
1. Is this a feasible solution?
2. What should I do in order to implement the vitrtual ODBC driver.
3. Any pointer will be appreciated.
Thanks
Jake.
Hi,
I need transformation data from files Btrieve (.dt) to any other formats. Where i can download driver ODBC or OLE DB for Btrieve?
And how install this driver?
Thank.
Could someone tell me how to use a query with a "connection string" to connect to an ODBC driver and retrieve data from its tables. I am new at this and have been having a lot of trouble connecting from the SSIS manager. If someone has a tutorial on how to do this. I would really appreciate it.
Thanks
I am new to Microsoft and have been tasked with writting and ODBC Driver.
I've looked through the MSDN site and found a number of articles that discuss ODBC Driver development. I've read through the ODBC API reference manual and have a pretty good idea what needs to be done.
What I need to move forward is to find some example code that I can look at. An article that identifies the steps to creating and deploying an ODBC driver would be great!
Does anyone know where I can find some ODBC Driver example code? Would it help if I had an MSDN Subscription?
Any suggestions would be appreciated.
Thanks,
Hi;
I am having problem figuring out if the JDBC Driver for MS SQL Server 2005 is faster or setting up a data source from Administrative tools/Data Sources. I have run several tests and in all tests, the odbc datasource is faster. In that case, why having the trouble of downloading a driver if I am not wrong. I have understood that the native driver is always faster than the odbc bridge.
Thanks in advance
We are using Visual Studio 2003 to develop a VC++ application to support SQL Server 2000 and 2005 through ODBC driver. I was able to successfully test the application with ODBC driver for 2000. But when it comes to the SQL Server 2005 using native ODBC driver it fails with "ODBCBCP.dll is not compatible with 'SQL Native Client' driver. Please configure 'SQL Server' driver for the DSN or connection string.
Then I tried to use the sqlncli.h inplace of odbcss.h and replaced the odbcbcp.lib with sqlncli.lib pointing to the C:Program FilesMicrosoft SQL Server90SDKLibx86 folder.
Code Snippet
#include <sql.h>
#include <sqlext.h>
#include <sqltypes.h>
#define _SQLNCLI_ODBC_
#include <sqlncli.h>
Now I can not compile the program. The errors I am getting are as follows:
c:Program FilesMicrosoft SQL Server90SDKIncludesqlncli.h(2894): error C2061: syntax error : identifier 'DB_UPARAMS'
c:Program FilesMicrosoft SQL Server90SDKIncludesqlncli.h(2901): error C2061: syntax error : identifier 'DB_UPARAMS'
etc
c:Program FilesMicrosoft SQL Server90SDKIncludesqlncli.h(2938): error C2061: syntax error : identifier 'HCHAPTER'
c:Program FilesMicrosoft SQL Server90SDKIncludesqlncli.h(2944): error C2061: syntax error : identifier 'HCHAPTER'
etc
The same code just works fine in the Visual Studio 2005, but we need the dll in Visual studio 2003.
I think I am missing pretty obvious. Your help is appreciated.
This is the Setup ...
On a Virtual PC i'm running an older Pervasive Btrieve App. That can be reached by a ODBC driver.
This Virtual PC runs om a 64bit Vista. On that 64bits Vista machine i'm running a 64bits instance of sql server and a 32bits, because there seems to be no way to have the 64bits instance use a 32 bits odbc driver.
From the production server (EntEd 32bits) i'm changing the ip of the Server in de Systsm_DSN to my Virtual PC. When testing the odbc driver it works, and using a select through the linked server works fine too.
When creating the same linked server on my Vista/32BitsSql Server it works too. But when selecting data i'm getting this error
OLE DB provider "MSDASQL" for linked server "VSERVER" returned message "[Pervasive][ODBC Client Interface][Client LNA]Your connection to the server is no longer working. To continue, disconnect from the data source and re-connect again. Contact your system administrator if you still need assistance.".
Msg 7306, Level 16, State 2, Line 1
Cannot open the table ""VANLIER"."SUP"" from OLE DB provider "MSDASQL" for linked server "VSERVER".
Is there a way to find out what's happening ??
dear all:
I used ADO to connection excel file(excel2003); below is the source code:
Dim Conn,Driver,DBPath,Rs, defaultPath
defaultPath=Replace(xlsFile, "VQAUser.xls", "")
Set Conn = Server.CreateObject("ADODB.Connection")
Driver="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & xlsFile & ";Extended Properties=""Excel 8.0; HDR=yes;"";"
Driver="DBQ="&xlsFile&";DRIVER=Microsoft Excel Driver (*.xls);UID=admin;UserCommitSync=Yes;Threads=3;SafeTransactions=0;ReadOnly=0;PageTimeout=5;MaxScanRows=8;MaxBufferSize=2048;FIL=excel 8.0;DriverId=790"
Driver="DRIVER=Microsoft Excel Driver (*.xls);DriverId=790;DefaultDir="&defaultPath&";DBQ="&xlsFile
Conn.Open Driver
but, when executed "conn.open Driver" it has an error like below:
錯誤類型：
Microsoft OLE DB Provider for ODBC Drivers (0x8007000E)
[Microsoft][ODBC Excel Driver] 系統資�滿載。
/webflow/eforms/337/readexcel.asp, line 20
�覽器類型：
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; InfoPath.1)
Any one can help me to fix this problem?
thanks in advance.
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
A developer installed a FoxPro application on my workstation and every time I connect to SQL Server 7 I get the following message:
The ODBC resource DLL(C:WINNTSystem32odbcint.dll) is a different version than the ODBC driver manager (C:WINNTSystem32odbc32.dll).
You need to reinstall the ODBC components to ensure proper operation.
I can still connect to the database and everything seems to work but I want to correct this problem. Could anyone tell me how to reinstall the ODBC components? I tried reinstalling SQL Server 7 on my workstation but it tells me that I have not selected any components, even though everything is selected. Do I need to uninstall SQL Server and then reinstall it?
Thanks in advance.
Mike
Hello,
I normally use Microsoft Access to retrieve data , via ODBC connection, from a table in a SQLserver database. One of the fields in the table has a value 1 but at times when the data is retrieved into MS Access it turns out to be 100 in Access. Moreover, when I try to change it in Access my computer hangs or it takes a long time before the change is effected. It does not matter from which client Pc this action takes place it remains the same. I am using ODBC SQLserver ODBC driver version 2000.81.9042.00.
I would be grateful if you could help me out of this strange situation.
Regards,
Albert
Hello,
I have a problem with ODBC Driver for SQL Server 6.5. The user always receive the following
message in client machine when try to access the application : "08S01 : [Microsoft][ODBC SQL
Server Driver]Communication link failure".
Anybody knows how I resolve this problem ?
Thanks....
I've been having some strange problems lately upon connecting to SQL Server via the Enterprise Manager, or via MS Access. The response time is MUCH slower than usual. The only change I'm aware of is that additional drives were added to the server.
At any rate, when logging in to Access my login (not my query) times out. I get SQL State: S1T00; SQL Server Error: 0; MS ODBC SQL Server Driver: Timeout Expired.
I'm not sure where to begin to troubleshoot this. The version of SQL Server ODBC driver I have is 2.65.0252. Perhaps this one is corrupt. How would I ascertain what the latest version is? And, if it's appropriate to replace it, how do I go about it? Is it a simple overwrite of the file?
I'm using SQL Server 6.5 SP2 on NT 4.0.
Thanks,
Lisa
Unable to load SQL Server ODBC driver resource DLL. The application cannot continue.
Can you help me ? I already update my driver ...
regards
Hi,
When Iam browsing my website, It showing an error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E37)
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'tbl_Users'. (this is the table name)
Why this error is comming
Please help me!
Shaji
Hi,On one side, I have a Sybase 12.5 32 bits Server running on AIX 5.1(maintenance level 3). On the other, I've got W2000 5.00.2195 (SP2)with SQL Server Standard Edition, Product Version 8.00.534 (SP2),having installed MDAC 2.6.I connect to the Sybase 12.5 database using Merant ASE ODBC driver forSybase 12.5, and using the Microsoft OLE DB Provider for SQL Serverthat comes with this SQLServer version.I try to pump over data from Sybase to SQLServer to one table at aSQLServer user database, using a package containing a select statementon a View on the Sybase Server side, using an ODBC 12.5 System DSNpointing to the Sybase server. All privileges are set correctly oneither side and the ODBC datasource test gives an 'OK' on trying toreach the Sybase Server.When I do PREVIEW, I get a resultset alright, however, when I actuallyrun the package as a scheduled job, its keeps on running infinitelyuntil manually killed. No data at all is inserted in the the SQLServertable.Strange thing is, the same processes is running without anycomplications on a W2000 5.00.2195 (SP3), MDAC 2.7 system, with thesame SQLServer connecting to the same Sybase Server but using MerantASE ODBC 12.0 instead of ODBC 12.5.How come?Any help will be greatly appreciated.Martijn Rutte
View 2 Replies View RelatedDeveloped reports in SSRS on local (32 bit) PC for ODBC connection (32 bit - Intersystems Cache database) - worked OK.
Deployed report to (64 bit) server, using same (32 bit) ODBC driver - report failed.
Aware of SSIS Run64BitRuntime flag that (apparently) allows use of 32 bit ODBC driver on 64 bit server.
Is there something similar in SSRS?
Or, a work around?
What other alternatives?
Wait for 64 bit ODBC driver for Cache database?
Wait for Run64BitRuntime flag to be included in SSRS?
Give up and use Crystal?
Hi,
Our software uses native ODBC driver and Visual C++ 2003 to communicate with SQL Server 2005.
SELECT xml_schema_namespace(SCHEMA_NAME(schema_id) ,name) FROM sys.xml_schema_collections.
SQLDescribeColW returns -152 as the datatype for the column in the above select statement. However, I€™m unable to find a preprocessor definition for -152. The datatype looks like an nvarchar. Is it an nvarchar? Where can I find the definition for this datatype?
I have discovered similar problems while bringing back SQL_VARIANT types. The returned subtype of a SQLVariant comes up with -16 and -25. I cannot find definitions for these sub types either.
Any help is appreciated.
Regards,
Venkat
I can not find the driver update for SQL Server 2005 ODBC. Does anyone know where I can download it. I look in microsoft downloads not luck.
View 1 Replies View RelatedI am experiencing the following error in a server 2003 and SQL 2005 environment.
I don't know much about SQL, and any help would be appreciated. I have been told to look at the ODBC, as well as several items in SQL. But alas I have not been able to do much with it. Software program was purchased and support for the system is extremely limited.
Here is the error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find server 'insert server name' in sysservers. Execute sp_addlinkedserver to add the server in sysservers.
I appreciate any help anyone has to offer.