No matter how many times i try to restore the analysis services database (.abf) on my analysis services instance ...its giving me the following message
The following system error occured: The system cannot find the file specified ..
File system error: The following error occurred while opening the file".
(Microsoft.AnalysisServices)
any ideas ?
Regards
Yukon DBA
I am needing to restore a SQL server 7 database. I had a backup, but the media it was on has failed. I have copies of the folder the original database was in (.mdf files and such), but I was wondering if there is a way to re-integrate these files in order to pick up where we left off. Thank you.
View 3 Replies View RelatedWe had a siutation last night in our production environment that forced us to revert back to an earlier version of the database (before a major code rollout that failed). After restoring the days full backup (with NORECOVERY), and then restoring a DIFF backup (FULL RECOVERY and had checked Preserve Replication Settings)...the transaction replication failed.
Message #1
The replication agent has been successfully started. See the Replication Monitor for more information.
Message #2
2011-03-04 15:07:17.566 Copyright (c) 2008 Microsoft Corporation
2011-03-04 15:07:17.566 Microsoft SQL Server Replication Agent: logread
2011-03-04 15:07:17.566
2011-03-04 15:07:17.566 The timestamps prepended to the output lines are expressed in terms of UTC time.
2011-03-04 15:07:17.566 User-specified agent parameter values:
[code]....
I've tried reinitializing the publication/subscription and while that took brand new snapshots and copied it over to the replicated data server, it did not fix the problem.I read from a different post that I could try running "sp_replrestart" but that ran for about a half an hour and didn't appear to do anything but fill up our log files...did I not wait long enough?
The only thing I know to do at this point is to drop the publication on the production server and rebuild it completely (and with all the tables we're replicating that would take quite a bit of time.
I did a full backup of a db from one server(Express2005) and trying to restore it to a different instance of SQL2005 on the same development machine. (Also had some fulltext columns if that means anything)
Many failures but finally got it to report all was successful except the icon in Object Explorer shows (Restoring...) with no indication of any real activity going on. It's a tiny database with hardly any data in it.
Just not sure what the heck is going on there. It also won't let me into the database until this the (Restoring...) goes away.
Any advice on how to get this thing finished out?
How does one correctly go about restoring the MSDB database?
How/what should I do with the status (loading)?
I have a good backup of the MSDB.
Any help will be appreciated.
Hi,
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Does anyone know what the problem could be?
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
I want to restore a database (from an encrypted .bak file) - but *not* over the live original if you take my meaning. Encryption is the standard AES-256 that comes with Sql Server 2014 btw. I don't want the original touched/altered in any way. I would like to capture a success message if possible.I can extract the physical device name of the database in question using the following code:
SELECT physical_device_name, *
FROM msdb.dbo.backupmediafamily
WHERE media_set_id =(SELECT TOP 1 media_set_id
FROM msdb.dbo.backupset
WHERE database_name='MyDatabase'
AND type='D'
ORDER BY backup_start_date DESC)
I would like if the newly restored database was rename to something different than 'MyDatabase' (as shown above) and has different logs than the original. If possible, and capture a success message when restored.
I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
1) We have got the database dump (.bak) file in one machine and we need to restore this to another machine where the SQL server (version 7) is running. But in the restore option there is no way to choose any mapped or shared drives in remote machine. Any pointer to resolve this problem?
2) Can you set up a database if you have the .mdf and .ldf files?
I am running SQL 7 on two seperate NT4 servers, a production server and a standby server. Both servers are configured for Mixed Mode authentication. If I back up a database on the production server, do I also need to back up the master database and restore it. My reasoning behind this is that users' login details will be held in the sysxlogins tbl in the master, while their access rights will be held in the sysusers tbl in the database I am backing up and restoring. If I back up and restore a database without backing up and restoring the master db as well, will the connection between the system login and the database user be broken.
Any comments/suggestions would be appreciated.
Hi there...
can any one help in following situation.
Suppose in a network I have two sql server ABC and XYZ and XXX (NT server) on same sub net.
1) I take a backup from server ABC on XXX (NT).(ie.. backup on network)
2) Can I restore database in XYZ which was backed up by ABC? How???
3) Suppose My ABC machines fails and I have to again install SQL Server 7 on it, will I be able to restore database from XXX(NT)? how???
regards,
zak
Currently have large database in three devices, named Cabinet cab2 and cab3. Cab3 device has been expanded twice. We are upgrading the hardware and would like to get the database into one device named cabinet and clean the mess up our vendor initially created for us. Any Ideas/steps on how this could be accomplished??? TKS Jerry
View 2 Replies View RelatedUsing SQL 7.0, has anyone backed up a database and restored on to a different database without the device files being moved around.
For example, With SQL 6.5 we used to backup PROD (source) database and restore to TRAIN (target) database. It worked just great regardless whether the databases are located on the same drive or not. We loved it and used it to refresh TRAIN from PROD on a weekly basis.(using sql Enterprise Mgr)
However, in SQL 7.0 when we attempt this procedure the database and log files of the TRAIN (target) are getting relocated to the drive location of PROD (source) database. Very strange.
Though thru object transfer i.e. import ,we can import data from PROD(source)
to TRAIN (target) database, but it is very slow and takes lot of time and performance degrades for source database (PROD)
Any input on above will be appreciated if backup / restore thru
enterprise mgr or TSQL procedure works in SQL 7.0 for restoring another database which is also on different drive i.e PROD (source) database on
drive C and TRIAN (target) database on drive E.
Thanks
Rajiv
While this may be in the wrong forum, I thought that I should try here first.
One of the developers that works for this company would like to restore a sample database to the SQL server after installing our software.
Is there a command line command that can be issued to restore/create a database with a file (.bak) of an SQL database (sample)? If this can't be done, can it be done with VBScript or something similar?
SQL is not my strong point, and neither is development. Any help would be appreciated.
TIA.
Joe
Hi,
Two of my hard drives went down yesterday. and with it went the Sql server database.The data recovery guys recovered the back up database (.bak) file.I have since reinstalled SQL Server 2000 and now when i try and restore the .bak file it says the Microsoft tape back up file set is not valid when i try and open the .bak file.
Whats the right way to add my databse to the SQl Server2000 using my .bak file and if anyone has come across the error they could help.
Thanks
L
hey...
when i try to restore my database... they gave an error. the database is still in use.. is there a way to kill all the connections to that database ?
Hi,
A while back, I used SQL Server 2000 to back up a database. Now, I am wondering if there is a way to restore this backup into a SQL Server 2005 environment as I no longer use SQL Server 2000?
Thank you
Hi all,
Our Application is made to work with different database. I have a few query
1. There is option of restoring for only table, the tables can be mention during runtime, how to acheive same in sql
2. During restoring if already same data exists, it throws an exception , based on the exception we display the message data already exist. In sql any option is available to check the data exist or not
3. Can sql create the column during runtime.
Thanks
theres two .mdf files
game_log.mdf
game_data.mdf
is there a way to restore a database with these files but not with .bak (backup) files? i couldn't connect to database so i reinstalled sql server 2000 and this time i could connect to the sql server fine but when i tried to restore the database, it wouldn't work when i set it to transcation log and it shows an error
The preceding restore operation did not specify WITH RECOVERY or WITH STANDBY. Restart the restore sequence, specifying WITH NORECOVERY or WITH STANDBY for all but the final step. RESTORE LOG is terminating abnormally.
please help, thank you
Hello,due to some testing my SQL Server crashed. I have to reinstall it and ...For now I only have .mdf file and nothing else. My question is: is there anypossibility to restore this .mdf file for SQL 2000? I have some useful datain this file and there will be nice to use it.Best RegardsMarciN
View 2 Replies View RelatedIs there a way to restore a database backup file to the default data directory in a specific SQL 2005 instance using T-SQL?
I know that you can use the command RESTORE DATABASE, but that will restore the database files back to it original location. I also know that I can use the WITH MOVE option also, but is there a keyword or some special notation that I can use to make sure that the data/log files are moved to the default data directory for a specific SQL 2005 instance?
I am trying to avoid cases where the original file location does not exists in the current file system.
Thanks in advance,
Rodney
i was using mssql 2000
how can i restore my database on another server without affecting the data stored on that server,
or
would there be a wizard where i can compose a query of the design of the whole database and run those on another server to update its structure
Hi everyone,
I made a backup for my Bilgiler database and then by relying on this back up, I erased my Bilgiler data base. so now I tried to restore this Bilgiler database by using Enterprise Manager however I could not succeed.
How can I overcome this ?
Thanks
Hello,
I am taking the error message which is in the below side,while restoring a database.(I am using sql server 2005)
The backup set holds a backup of a database other than the existing 'db1' database. (db1 is the database name.)
Can you help me?
Hi
I have a .db file from another server and i am trying to install it at home and get this lengthy error message ( 9 lines long )
Microsoft SQL-DMO ODBC SQL STATE 42000
The physical name ( path blah blah may be wrong)
how do i change the physical path of the .db file i'm trying to restore??
thx
Hi there,
I am using VWD and have my production website hosted elsewhere. The hosting company provides a backup service that allows me to download a something.bak file as the backup of my website. My query is: how to export or copy the data in the something.bak file into the database on my own computer? Can anyone helps please?
Thanks in advance.
m able to take backup and restore the database through gui. Backup is comming with backup query, but using restore query m unable to restore database.It is giving exception is REstore failed for server.what it means ? what is the solution for this?
View 1 Replies View RelatedWhen I restore some one elses database in SQL 2000 I get an error
[Microsoft SQL - DMP ( odbc state:42000)]
An internal consistency error occured, Contact technical support RESTORE DATABASE is terminating abnormally
at first I thought it was the sort order and collation, but now I have the same and I still get this error.
Does anyone have any ideas or atleast point me in the right direction.
Does anyone know if it is at all possible to restore a single database from tape if no backup jobs have been ran or setup for this database. However, the server itself has been backuped to tape. So I would like to restore this database from the server tape backup. If so, how do I accomplish this?
View 1 Replies View RelatedHai,
We are using sql server 7.0 for developing our applications.Recently we formated the disk and.But before doing so i just backed up the database(full backup using EM) alone.Then i restored the database after reinstalling sql server.All the objects are restored except the logins.So how to restore the logins.
I cannot create logins of same name and getting an error saying that the login already exists.
Thanks in advance.
Regards
K.Saravanan
I have two servers (same config) I am trying to restore a database that I backed up on one server to the other. The method I used was as follows: I backed up the database to disk.
Copied to the Disk of the second server.
When I try to restore I get the following message.
"The backup set holds a backup of a database other than the existing "database name" database.
What am I doing wrong?
Hi, I am in a production database server. Data has been added and deleted via the web. So there is alot of traffice in and out of the database. How can I make a backup plan to make sure I am not lossing any input or deleted data . I am familiar with backing up a database in regular intervals, but I amnot sure if this is the best way in this senario.
How can I take advantage of the transaction log in restoring the database.
Thanks
Ahmed