ASP - Building A Query - Question
Feb 12, 2007
Good Afternoon!
I have a (hopefully) simple question.
I have recently been bumped into an applications developer position. I took a week of ASP training a few months ago, but outside of that my exposure to ASP and SQL has been EXTREMELY limited.
I just undertook my first project using these skills. We have an application where I track "Letters". I fill out a form with information regarding the Letter, and save it so there is a record of the letters existence and what its status is.
Afterwards, we want to update the status, so I find the saved form, make my edits, and save it.
This is where my problem starts.
When I first save the letter, I have no problems whatsoever.
When I save it a second time after making my edits, I get an error:
Microsoft OLE DB Provider for SQL Server error '80040e14'
Line 1: Incorrect syntax near 'yearID'.
/AuditFlowChart/UpdateAudit.asp, line 206
What I am doing with the ASP is basically created a SQL statement to update the table with the new letter information. I added a line to print out the store proceedure that is being created by the following line
Set rsRecordsetObject = objCOMComponentClassObject.ExecuteSQLStatement(spStoredProcedure,vntSQLServerName,dbDatabaseCatalog)
I print out spStoredProcedure and I get the following
UpdateCorrespondence @p_idCorr = 416,
@p_dtOfLetter = '8/7/2008',
@p_dtRcvdByRespAtty = '2/19/2007',
@p_dtRcvdByAdmin = '2/23/2007',
@p_descOfEntity = 'This is a test 2009 letter. Dated 2/8/2007',
@p_ClientCode = '01074',
@p_MatterCode = '0055',
@p_dtDue = '3/15/2007',
@p_dtEffective = '4/18/2007',
@p_dtYE = '4/8/2007',
@p_respAtty = '0330',
@p_respAttyFull = 'Abelson, H. Edward',
@p_prepParalegal = 'Aldous, Anne Marie',
@p_prepAtty = 'Abromowitz, David',
@p_prepLitParalegal = 'Allegrini, J. Samuel',
@p_dtGivenToParalegal = '4/20/2007',
@p_dtGivenToAtty = '2/28/2007',
@p_dtMemoCirculated = '2/18/2007',
@p_dtRespSentToLitParalegal = '2/10/2007',
@p_dtRespSentToPrepAtty = '2/26/2007',
@p_dtSentToAccountant = '2/15/2007',
@p_memoDSid = 1111111,
@p_respLetterDSid = 2222222,
@p_sideLetterDSid = 3333333,
@p_comments = NULL,
@p_yearID = rsLetterDetail1('yearID'),
@p_opinion = 1,
@p_complete = 0,
@p_userID = 'GSSUSO1517'
When I run the above thru Query Analyzer, I get the following:
Server: Msg 170, Level 15, State 1, Line 26
Line 26: Incorrect syntax near 'yearID'.
So now I know where my error lies, but I am not sure where to look next. Does anyone have any ideas? Is there a problem I am not seeing with the query?
Any help would be wonderful and much appreciated.
View 2 Replies
ADVERTISEMENT
Feb 14, 2007
Hello,
This will probably be trivial and basic for most, but I'm having a hard time trying to figure out the best way to do a SELECT statement. First, let me explain what I have:
Two tables:
Table 1:
Orders
Some of the fields:
ID
PropID
WorkOrderNum
OrderDesc
DateCompleted
Table 2:
OrderDetail
ID
OrderID
TenantName
As you probably have realized, the OrderID in my 'OrderDetail' table corresponds to the ID field in my 'Orders' table. The 'Orders' table contains the order header information, while the OrderDetail contains line items for that order - 1 line item per record.
Here is my SQL statement to retrieve an order when searching by the 'Order Description' (Orders.OrderDesc):
SELECT PropertyLocations.PropertyLocation, Orders.ID, Orders.PropID, Orders.WorkOrderNum, Orders.OrderDesc, Orders.DateCompleted FROM PropertyLocations, ORDERS WHERE PropertyLocations.ID = Orders.PropID AND OrderDesc LIKE '%lds%'
Ok, so now for the 'big' question/problem: I also need to be able to search the 'Tenant Name' field from the 'OrderDetail' table. So what is the best/most efficient way of doing that? The other stipulation about that is that there can be (and usually is) several records/line items (in the OrderDetail table, of course) that contains the same (or similar) data, but I don't want duplicates. And when I say duplicates, all I care about is retrieving a few fields (as you can see from my SQL statement) from the 'Orders' table. Another way to describe what I want is that I want all unique orders that have a 'TenantName' in the 'OrderDetail' table that matches the search criteria. My brain just isn't wanting to figure this out right now, so I was hoping someone could help me out.
thanks.
View 9 Replies
View Related
Jan 30, 2006
Hi there,
i have a query building question and was hoping that one of you would know the answer.
Here is what i need to do :(i am using asp.net and ado.net)
I have 1 table where I store thedata, where 5 criteria determine a unique row in this table. Now, this has recently changed as the start date was added. So there potentially can be more than one entry in the table with same 5 criteria, but different start date.
I need to retrieve the row with the latest start date (currently active). The problem arises when the users enter less than 5 criteria. In this case the results may not possess same 5 criteria. Say the user searches based on 2 criteria. Then all the rows possessing these 2 ctieria will be returned, but other 3 criteria might differ with the results set.
But, i only need the latest start date row for each row. So for example, if i searched on 2 criteria, i got back 4 rows, 2 of which possess the same 5 criteria. But between these 2 i only need to display ONE row to the user - the one with the latest date.
How do i build a query? say the table name is tbl, and criteria 1 to 5 fields are called c1 ... c5, and start date field is called start_date.
thanks in advance
View 1 Replies
View Related
Apr 21, 2006
I am hoping someone can point me in the right direction with this.I have query that returns all the colums in a row (SELECT * FROM table WHERE value = 'value') and I need to build a table with this data. Some of the columns may not have values in them, and so I dont want to build a table row for it. I also need to use the column name as the table header. As an example:==============================Column Name || Column Value-----------------||-----------------Column Name || Column Value
-----------------||-----------------
I hope I have explained myself properly. Any help would be greatly appreciated.
View 4 Replies
View Related
Sep 13, 2007
Hi,
I'm using 2005 management studio express.
Can I use the graphical query builder to specify tables from more than one database?
I know I can do this in sql in the format database..table.column but in the query builder it only shows tables from the current database. Can you get around this?
Thanks
View 1 Replies
View Related
Jun 15, 2006
I am trying to generate some datasets with some queries...With a given series information, it should return PART_NOs that has STD= 1 and a unique price at that particular 'START', and keeping the'TYPE' in consideration...DB examples below:Main DBIDPART_NOSERIESSTD1A-1A12A-2A13A-3A14D-1D15D-2D0Price DBIDPART_IDTYPESTARTPRICE501X100050511X1000040521Y100060531Y1000050542X100050552X1000040562Y100060572Y1000050582X100090etc.main.ID and Price.PART_ID are paired together.So in an example case, lets say I am querying for SERIES A, with TYPEX. A table should be outputted something likePART_NOA-1100050A-11000040A-3100090Note how it skipped printing A2 because the price is the same as A1.I'm really looking for the SQL code here... I can't get it to filter ondistinct price.SELECT MAIN.PART_NO, PRICING.START, PRICING.PRICEFROM MAIN, PRICINGWHERE (MAIN.SERIES LIKE 'A')AND (MAIN.STD = '1')AND (PRICING.PRICE != '')AND (PRICING.TYPE = 'X')AND (MAIN.ID = PRICING.PART_ID)I've been trying to use GROUP BY and HAVING to get what I need but itdoesn't seem to fit the bill. I guess I'm not terribly clear on how Ican use the SQL DISTINCT command...? If I try and use it in my WHEREstatement it gives me syntax errors, from what I understand you canonly have distinct in the select statement? I'm not sure how tointegrate that into the query to suit my needs.Thanks for any help.
View 4 Replies
View Related
May 15, 2008
Hi,
Does anybody know if it is possible to obtain an alias from a Query without using Dynamic SQL.
My Problem Looks like this:
CREATE TABLE Source (SourceName varchar(50), SourceAge int)
INSERT INTO Source VALUES ('Mary',41);
INSERT INTO Source VALUES ('John',22);
INSERT INTO Source VALUES ('Tom',15);
INSERT INTO Source VALUES ('Bill',55);
The Statement should look like This:
SELECT A.SourceAge AS A.SourceName FROM Source A;
The Result should look like this:
Mary John Tom Bill
----------------------------------------
41 22 15 55
Thanks in advance
Raimund
View 2 Replies
View Related
Feb 27, 2007
I have a class that works fine using the SQLDataReader but when I try and duplicate the process using a Dataset instead of a SQLDataReader it returnsa a null value.
This is the code for the Method to return a datareader
public SqlDataReader GetOrgID()
{
Singleton s1 = Singleton.Instance();
Guid uuid;
uuid = new Guid(s1.User_id);
SqlConnection con = new SqlConnection(conString);
string selectString = "Select OrgID From aspnet_OrgNames Where UserID = @UserID";
SqlCommand cmd = new SqlCommand(selectString, con);
cmd.Parameters.Add("@UserID", SqlDbType.UniqueIdentifier, 16).Value = uuid;
con.Open();
SqlDataReader dtr = cmd.ExecuteReader(CommandBehavior.CloseConnection);
return dtr;
This is the code trying to accomplish the same thing with a Dataset instead.
public DataSet organID(DataSet dataset)
{
Singleton s1 = Singleton.Instance();
Guid uuid;
uuid = new Guid(s1.User_id);
string queryString = "Select OrgID From aspnet_OrgNames Where UserID = @UserID";
SqlConnection con = new SqlConnection(conString);
SqlCommand cmd = new SqlCommand(queryString, con);
cmd.Parameters.Add("@UserID", SqlDbType.UniqueIdentifier, 16).Value = uuid;
SqlDataAdapter adapter = new SqlDataAdapter();
adapter.SelectCommand = cmd;
adapter.Fill(dataset);
return dataset;
}
Assume that the conString is set to a valid connection string. The Singlton passes the userid in from some code in the code behind page ...this functionality works as well.
So assume that the Guid is a valid entry..I should return a valid dataset but its null.
View 2 Replies
View Related
Jan 17, 2008
Let me start by asking that no one try to convince me to use Stored Procs. The examples below are a lot more simplistic then my real world code and it just gets too complicated to try to manage the quantity of SPs that I would need.
I have an application that displays a lot of data and I've created a system for users to filter the data using checkboxlist controls, dropdown controls, etc. From this, I have a "core" query that selects the fields that display in my GridView. It has a base Select clause, From clause and Where clause. From this I then add more to the Where clause to apply these filter values.
Here's an example "core" query:
SELECT Profile.FirstName, Profile.LastName, Project.ProjectNameFROM Profile, ProjectWHERE Profile.ProjectCode = Project.ProjectCode
From this if a user want's to only display profiles from NC, they could select that from the CBL and the query would be modified to:
SELECT Profile.FirstName, Profile.LastName, Project.ProjectNameFROM Profile, ProjectWHERE Profile.ProjectCode = Project.ProjectCodeAND Profile.State IN ('NC')
My code would add the last line above since the user specified that they only wanted NC profiles.
This is very simple and I have this already going on with my application. Here's the problem. In order to accommodate all of the various filters, I have to inner join and left join a bunch of various tables. Many times I include tables that have no data to display or filter on and therefore impacts performance. Here's an example:
SELECT Profile.FirstName, Profile.LastName, Project.ProjectNameFROM Profile, Project, AgentWHERE Profile.ProjectCode = Project.ProjectCodeAND Profile.AgentID = Agent.AgentID
From the query above, I have included the Agent table that holds the agent's contact information. One of my filters allows the user to type in an agents name to find all profiles assigned to it. Here's what that would look like:
SELECT Profile.FirstName, Profile.LastName, Project.ProjectNameFROM Profile, Project, AgentWHERE Profile.ProjectCode = Project.ProjectCodeAND Profile.AgentID = Agent.AgentIDAND Agent.Name = 'Smith, John'
You can see now that it was necessary to have the Agent table already joined into the query so that when I used the agent name filter, it wouldn't crash out on me.
The obvious thing would be to only include the Agent table when searching for an agent name. This is ultimately what I'm looking to do, but I need a solid method to go about doing this. Keep in mind that I currently have 16 tables in my "core" query and many of those are not needed unless the filters call for it.
If anyone has any ideas on how to simplify this process I'm selcome to suggestions. We're using SQL 2000, but are looking to upgrade to SQL 2005, if that makes any difference. I know that the way I do table joins is compliant with SQL 2005 and I'm certainly open to suggestions that will make it forward compatible.
This app is using .NET 2.0 and written in VB.NET. Thanks for any help!
View 14 Replies
View Related
Sep 22, 2006
I currently have a form that has different options in a list box such as:Status Codes
View 3 Replies
View Related
Apr 19, 2008
Hi i have a page whereby the user can make a search based on three things, they are a textbox(userName), dropdownlist(subcategoryID), and region (regionID). The user does not have to select all three, he or she can enter a name into the textbox alone and make the search or enter a name into the textbox and select a dropdownlist value, my question is how can i build this procedure, I tried this but it didnt work;
Code:
ALTER PROCEDURE [dbo].[stream_UserFind]
(
@userName varchar(100),
@subCategoryID INT,
@regionID INT
)
AS
declare @StaticStr nvarchar(5000)
set @StaticStr = 'SELECT DISTINCT SubCategories.subCategoryID, SubCategories.subCategoryName,
Users.userName ,UserSubCategories.userID
FROM Users INNER JOIN UserSubCategories ON Users.userID= UserSubCategories.userIDINNER JOIN
SubCategories ON UserSubCategories.subCategoryID = SubCategories.subCategoryID WHERE UserName like @UserName'
if(@subCategoryID <> 0)
set @StaticStr = @StaticStr + ' and SubCategories.subCategoryID = @subCategoryID '
if(@regionID <> 0)
set @StaticStr = @StaticStr + ' and SubCategories.RegionId = @regionID '
exec sp_executesql @StaticStr
)
View 2 Replies
View Related
Sep 8, 2006
Using a language that using A4GL to connect to the database. From within the language(COBOL) we have the ability to add a simple query. All is fine with one exception. Some of the fields might have a quote mark in it.
we have a field in particular that a lot of our clients like to put an apostrophe in. such as 0001A'06, 2'11" and so on. Now from inside our programs and using the simple query we add something like 'where ap_id = '0001A'06' which i know is an error but is there a way around this or a way to make it work?
View 3 Replies
View Related
Feb 27, 2008
This should be an easy enough answer to find if I just knew what to search on!
I am building a query within my stored procedure based on what parameters are passed in. For example, suppose I have a table with first name and last name. I can call the sp with either first name or last name or both, so I build a query accordingly that says:
select * from tblNames where FirstName = 'Hannah'
or
select * from tblNames where LastName = 'Montana'
or
select * from tblNames where FirstName = 'Hannah' and LastName='Montana'
My problem is putting the single quotes around the variable value.
SELECT @whereClause = @whereClause + ' AND tblNames.LastName=' @LastName-with-singlequotes-around-it
Thanks
View 3 Replies
View Related
Apr 4, 2008
The View SQL below takes 1:50 minutes to execute. I am looking for a way to improve processing time and keep the view select statements as simple as possible.
One part of the view that could be restructured is the lookup for the current term (TERM_TBL - bolded). When I hard code the current term my execution time drops to about 13 seconds
There are three possible values for the current term; one for each of our three acedemic careers (UGRD, CONT, & EXED). Could this information be looked up once and then each enrollment selected based upon the appropriate academic career current term value? If so, how would it be restructured? Currently, the lookup is done for every enrollment record.
There are no common fields between the NAMES table and the TERMS_TBL.
Code Snippet
SELECT A.EMPLID, A.LAST_NAME_SRCH, A.FIRST_NAME, A.MIDDLE_NAME, A.LAST_NAME
FROM NAMES A
WHERE A.EMPLID IN (
SELECT DISTINCT B.EMPLID
FROM STDNT_ENRL B
WHERE B.INSTITUTION = 'AAAAA'
AND B.STRM >= (
SELECT DISTINCT T.STRM
FROM TERM_TBL T
WHERE T.INSTITUTION = B.INSTITUTION
AND T.ACAD_CAREER = B.ACAD_CAREER
AND T.TERM_BEGIN_DT <= GETDATE()
AND T.TERM_END_DT >= GETDATE())
AND A.EMPLID NOT IN (
SELECT DISTINCT C.EMPLID
FROM SRVC_IND_DATA C
WHERE C.INSTITUTION = 'AAAAA'
AND C.SRVC_IND_CD = 'DPL' )
AND A.NAME_TYPE = 'PRI'
AND A.EFFDT = (
SELECT MAX(D.EFFDT)
FROM NAMES D
WHERE D.EMPLID = A.EMPLID
AND D.NAME_TYPE = 'PRI'
AND D.EFFDT <= GETDATE() )
Any suggestions will be gladly accepted. Keep in mind that the new and much improved must be legal within the context of a view select statement.
Thanks,
Steve
View 3 Replies
View Related
Feb 18, 2008
Thanks in advance for taking the tiemt o read this post:
I am workingon an application in vb.net 2008 and I have 5 drop down lists on my page.
I have code that worked in .net 2005 for my databind but would like to use new features in 08 to do this same thing.
Here is my 05 code how would I do this same things in 08?
Dim db As New DataIDataContext
Dim GlobalSQLstr As String
GlobalSQLstr = "select Orig_City, ecckt, typeflag, StrippedEcckt, CleanEcckt, ManualEcckt, Switch, Vendor, FP_ID, order_class, Line_type, id from goode2 where 1=1"
If (ddlOrigCity.SelectedValue <> "") Then
GlobalSQLstr &= "and Orig_City = '" & ddlOrigCity.SelectedValue & "'"
End If
If (ddlSwitch.SelectedValue <> "") Then
GlobalSQLstr &= "and switch = '" & ddlSwitch.SelectedValue & "'"
End If
If (ddlType.SelectedValue <> "") Then
GlobalSQLstr &= "and Order_Class = '" & ddlType.SelectedValue & "'"
End If
If (ddlFormatType.SelectedValue <> "9") Then
GlobalSQLstr &= "and typeflag = '" & ddlFormatType.SelectedValue & "'"
End If
If (ddlVendor.SelectedValue <> "") Then
GlobalSQLstr &= "and Vendor = '" & ddlVendor.SelectedValue & "'"
End IfDim AllSearch = From A In db.GoodEcckts2s
If (ddlErrorType.SelectedValue <> "0") Then
GlobalSQLstr &= "and ErrorType = '" & ddlErrorType.SelectedValue & "'"
End IfDim cmd As New SqlClient.SqlCommand
Dim rdr As SqlClient.SqlDataReaderWith cmd.Connection = New SqlClient.SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString1").ConnectionString)
.CommandType = Data.CommandType.Text
.CommandText = GlobalSQLstr
.Connection.Open()
rdr = .ExecuteReaderMe.gvResults.DataSource = rdrMe.gvResults.DataBind()
.Connection.Close()
.Dispose()End With
View 4 Replies
View Related
May 31, 2006
ASP.net 2.0 (VB), SQL Server 2005:While creating a new TableAdapter in design section, I'm using the query builder and trying to write a query within "LIKE" statement as below -Example1: SELECT * FROM table WHERE field LIKE @'%TextBoxData%'Example2: SELECT * FROM table WHERE field LIKE '%@TextBoxData%'
but these query doesn't work...error in building query...any clue to make it work? If I remove "@" sure the query will work with normal but '%TextBoxData%' will become a hardcoding value...this is not I want...I want make the TextBoxData become a flexible value depend on the data what I enter in my text box like 'abc,123' not like 'TextBoxData'...
I know normally it supposed to be like:
"SELECT * FROM table WHERE field LIKE '%" & TextBoxData.Text & "%'"
It can work when in Code Section, but not at this time...because now i'm trying to made it with "Query Builder" for TableAdapter " in Design Section...hmm did you get what I mean? Sorry for my bad english
Thanks in advance
View 3 Replies
View Related
Feb 4, 2008
I ran across this technique being used in an application the other day. It seems not a good idea to me. What do you think?
1. The proc builds a basic query, nothing real fancy, into a string variable called @SQL defined as varchar 2000. Depending on the result desired, the group by clause can be one of three different sort orders.
2. The string is executed via EXEC @SQL.
It seems to me that the whole process can eliminate the EXEC and just use some other construct. All the parameters are passed in via the initial call to the stored proc. It also seems that every time this is executed it will result in a new query compile and cache useage, no matter what. Wasteful? Should I take the developers aside and knock heads? I think the app was coded by some folks who were rookies then but may be willing to crack open their code. Or, am I the one that is a rookie?
Thanks for your inputs.
View 11 Replies
View Related
Feb 1, 2007
Hi! Hello. I have now started to build my own community. And I have some questions on the database.For the users to login I use the login control and all the users information is stored in the ASPNETDB.MDF database.In the web.config file I have created some profiles for saving some information about the users (Name, Birth, Town) and so on.Now. All the users in this community will have their own profile page, Guestbooks ++.So I was wondering if I should create tables for all features like guestbook, profile pages or should I do this by using Profile (ASP.NET).How many users does ASPNETDB support?.
View 1 Replies
View Related
Jul 31, 2007
Is there any sql method that takes 3 parameter like, day, month and year . And return me the date.
For example
function(10,3,2007) and it returns 10-03-2007
Thanks,
View 2 Replies
View Related
Jan 3, 2008
userfeatureuserName featureIda 1a 5b 1b 5b 9c 5 c 9
menuid Pid Name1 Administrator2 1 Create User3 1 Delete USer4 1 View log5 WSR6 5 X7 5 X8 5 X9 Manager10 9 Y11 9 Y
Using the above table i want to create a treeview ie based on the user login. Please let me know if there is any previous sample to this situation.
View 2 Replies
View Related
Apr 15, 2004
Hi
I've never done this before and I have all kinds of issues conflicting in my head (search rank, noise words, injection attacks ..etc). simply i need to search several columns in a table in the database using one search text (just like the simple search in Google). if multiple words are you used then the search should search for each of them. also manage to ignore noise words and other issues.
what is the best way of doing this? I looked at FTS in SQL 2000 but didn't know how to handle all the above mentioned issues. this should be simple, right? but i have been looking all day. I guess i don't know what im looking for because i've never implemented a web search b4.
please help
p.s. I know t-sql and asp.net/c# well.
View 1 Replies
View Related
Mar 9, 2006
I am not very experienced with stored procs and I'm attempting to write my first one. I am writing a search page via aspx and that page will call my proc and depending on the input parameters, the proc will return the search results. To do this I have built a where clause string but I don't know how to (if it's even possible) make this variable part of my query. Can anyone tell me a way to make the following work (input params left out to conserve space)?
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
SET ANSI_WARNINGS OFF
SET @where = ''
IF @JobNoStart !='' SET @where =+ ' AND LJOB BETWEEN @JobNoStart AND @JobNoEnd'
IF @OrderDateStart !='' SET @where =+ ' AND JOBDATE BETWEEN @OrderDateStart AND @OrderDateEnd'
IF @DueDateStart !='' SET @where =+ ' AND DUEDATE BETWEEN @DueDateStart AND @DueDateEnd'
IF @ProofDateStart !='' SET @where =+ ' AND PROOFDUE BETWEEN @ProofDateStart AND @ProofDateEnd'
IF @CloseDateStart !='' SET @where =+ ' AND CLOSEDATE BETWEEN @CloseDateStart AND @CloseDateEnd'
IF @CogsDateStart !='' SET @where =+ ' AND COGSDATE BETWEEN @CogsDateStart AND @CogsDateEnd'
IF @ProductName !='' SET @where =+ ' AND PRODUCT = @ProductName'
IF @CustomerNumber !='' SET @where =+ ' AND FCUSTNO = @CustomerNumber'
IF @SalesPerson !='' SET @where =+ ' AND FSALESPN = @SalesPerson'
IF @CSR !='' SET @where =+ ' AND JOBPER = @CSR'
IF @Closed = 0 SET @where =+ ' AND CLOSEDATE IS NOT NULL OR CLOSEDATE IS NULL'
ELSE IF @Closed = 1 SET @where =+ ' AND CLOSEDATE IS NULL'
ELSE IF @Closed = 2 SET @where =+ ' AND CLOSEDATE IS NOT NULL'
IF @Canceled = 0 SET @where =+ ' AND CANCDATE IS NOT NULL OR CANCDATE IS NULL'
ELSE IF @Canceled = 1 SET @where =+ ' AND CANCDATE IS NOT NULL'
ELSE IF @Canceled = 2 SET @where =+ ' AND CANCDATE IS NULL'
IF @FinalShip = 0 SET @where =+ ' AND FINALSHIP IS NOT NULL OR FINALSHIP IS NULL'
ELSE IF @FinalShip = 1 SET @where =+ ' AND FINALSHIP IS NOT NULL'
ELSE IF @FinalShip = 2 SET @where =+ ' AND FINALSHIP IS NULL'
SELECT LJOB, DUEDATE, FCOMPANY, ID, QUAN WHERE LJOB IS NOT NULL @where
END
View 4 Replies
View Related
Jan 6, 2003
Hi,
I am having some problems trying to build an sql statement from more than one statement.
Here is the statement
select 'Insert App_Column (Table_ID, Column_Type_Transformation, Column_Name, )
Values (@table_ID,' ,'NULL,', name from payatwork..syscolumns where id in (
select id from payatwork..sysobjects where name like 'Employee_Profile')
order by colorder, ')'
What I am finding is that the bracket at the end of the statement is not appearing - how do I append statements to the end of this sql statement (i've tried various combinations of the + sign and the comma without success.
thanks,
Jim
View 4 Replies
View Related
Oct 25, 1999
I'm in the midst of planning how to build an NT box to host SQL 7.0 and was wondering if there is any advantage to segregating the RAID 5 Array (5 x 18GB drives) into numerous *logical* partitions to separate database and log files (I can't see what advantage there would be if the disks are all on the same array, but..)
If anyone has any pointers or links to recommended NT configurations for hosting SQL, I'd appreciate hearing them.
TIA,
RM
View 1 Replies
View Related
Sep 18, 1999
Help Please - JMail - SQL SPs - Confirmation Email
I'm at the last stage of my current project and an totally stuck.
I'm trying to build the body of a order processing request email. For security reasons I wish to use a SP to build and send the email. (therefore no sensitive data gets passed to the client)
I have the JMail Object running properly on the server. It collects and sends the email in the normal course of the transaction from the client. Problem is that I cannot figure out how to properly build the body of the email in the SP.
I'm looking to do add the following to a single SQL SP variable to stuff in the Jmail Object to be sent. The content of the variable should look something linke the following:
-----------------------------------------
"Order placed:" = orders.date + '<cr>?'
customers.name<cr>
orders.shippingaddress<cr>
orders.billingaddress<cr>
/*loop each record where
/*customerID and orderID match passed arguments
/***loopstart***
OrderDetails.SKU <tab> Product.Productname <tab><tab> Orderdetails.Qty <tab> OrderDetails.Price<cr>
/***loopend***
Ordertotal.GrandTotal
--------------------------------------
Any help greatly appreciated.
THX,
Charles
View 2 Replies
View Related
Aug 23, 2004
I am working with SQL server 2000. The database is installed in my machine. Now I have got the ".ldf" and ".mdf" file pertaining to a database from someother server.
Is it possible to build the database present in the above said files in my server.
NOTE : I dont have a direct access to the remote server from where the above said files were obtained (otherwise I think the DTS utility would have come in handy).
View 4 Replies
View Related
Jun 19, 2008
I have a SQL 2005 database containing the location of graphics files. I want to start learning how to write a C# application that will get a path from the DB and display the file. Any recommendations on sites where I can start learning how to do this?
Thanks
View 1 Replies
View Related
Jun 18, 2007
Hi I've been asked to design a samll database in access with 5 tables and 3 querys also a form, and reports.
I'am not to sure on what to charge the person would any1 have a idea on what a small to medium database would be cost to build.
Thanks
View 2 Replies
View Related
May 5, 2006
Can you build reports using SQL Express w/o SQL 2005. If so how, the online books are not making this very clear.
View 1 Replies
View Related
Jul 27, 2007
I'm stuck and uinder a bit of a time crunch. I have 5 fields I want to get out of a sql database using a function that I'm writing. I figure it sounds like an array. basically I want to make an array, and fill it up with the results of a sql select, then read the array. This is what I have so far..... String TempHRAcctCode, TempJobDescription, TempHourlyRate, TempEmplID; Array TempArray; TempJobDescription = DDDept.SelectedItem.Text; (to get KeY Value) SqlConnection connection = new SqlConnection(ConfigurationManager.ConnectionStrings["MYCONN"].ToString()); connection.Open(); SqlCommand command = new SqlCommand("Select HRAcctCode, HourlyRate , EmplID, ... FROM TimeMyProfile WHERE JobDescription = " + TempJobDescription + " ", connection); SqlDataReader TempDataReader = command.ExecuteReader; while TempDataReader.Read ( ... OK I GIVE UP! Thanks in advance
View 2 Replies
View Related
Nov 15, 2007
Hello,
I'm having problems building an sql stament that joins a few tables. I can seem to get my head around the structure!
I have to try and link up four different tables to try and get my result.
Here are the 4 table structures...
Web_Users----------------User_IDName
Tags_Table-----------------Tags_IDUser_IDGroup_IDTitle
Created_Groups-----------------------Group_IDGroup_Name
Tags_To_Groups------------------------Group_Link_IDGroup_IDTag_ID
Basically, this database, has four tables; One table (Web_Users) that contains a users name, and assigns a unique ID (User_ID), another table that stores a users tags they have created, and also links it to a group_ID. The created_groups table, contains group names and assigns a unique id also. And the last table, Tags_To_Groups, links tags to groups.
So this is what I'm trying to do...
I'm trying to get the Group_name field from Created_Groups table, of a tag , that belongs to a certain user. If sounds easy when I say it like that, but I've been inner joining tables all night and failing every time.
Does this make sense? Can anyone help?
Thank you
View 3 Replies
View Related
Mar 21, 2006
Hi Everyone,I'm facing this problem now.Cannot open database "C:myDB" requested by the login. The login failed.Login failed for user 'myLaptopASPNET'.May i ask how can i resolve?Please feel free to let me know the information you need.Thank You!
View 3 Replies
View Related
Jul 18, 2001
Hi all,
I have a question about re-creating the sql portion on either node a or b in a clustered situation. Is it possible to do this without affecting the working node and database ? or is the best solution to make a ghosted image of the node after install is complete and if the node fails just get to a point on the affected node where you can copy the image back?
Thanks for any feedback.
P
View 1 Replies
View Related
