ASP.NET Configuration With VWD 2005 Express Ed.
Nov 15, 2006
I am deploying a new website (hosted at Godaddy.com) and want to take advantage of some of the power VWD 5005 offers. Specificaly the 'ASP.NET Configuration' under the 'Website' menu item. How do I go about using the ASP.NET Configuration on a site that is hosted? Is it possible? I want to be able to add new rolls, create some users manually and set permissions on directories. If I cant use ASP.NET Configuration how do i go about this task in a hosted environment. My host is GoDaddy.com
Thank you,
View 1 Replies
ADVERTISEMENT
Sep 22, 2007
I am getting following error when trying to install SQL express 2005 on XPSP2.
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine SIGMA-805539A79 Error:2147944122 (0x800706ba).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
I tied re-installing WMI using http://blogs.msdn.com/jpapiez/archive/2004/12/09/279041.aspx link but could not get it working.
Do i need IIS installed? Its not installed on this box...
please suggest something... i am stuck...
Thanks,
View 3 Replies
View Related
Mar 15, 2007
Hi!I have installed Sql Server 2005 Express on my machine. I want to access this server from another machine in LAN.Also installed Sql Server 2005 on another machine. Allow Remote Connections is selected with Sql Server Surface Area Configuration.Please suggest the correct solution. (in detail) Thanks in advancemilind
View 2 Replies
View Related
Feb 11, 2008
Hello. I am called Narsiste.
I have a problem of configuration in SQL server 2005 express train. In fact, I do not know how to make the configuration to tackle the databases SQL server 2005 express train which are on a station has starting from a station B (both being in a network LAN).
But I read in the module of €œconfiguration of the surface of exposure for the services and connections - localhost€? that €œBy defect, the editions Express train, Evaluation and Developer SQL SERVER 2005 authorize only local connections.€?. As it is BY DEFECT, I said myself that it will have to be changed a parameter so that access TCP/IP can go on this version of SQL SERVER.
Here is the message which I have:
€œAn error occurred during the establishment of a connection to the waiter. At the time of connection to SQL Server 2005, this failure can be due to the fact that the default settings of SQL Server do not authorize remote connections. (Provider: Interfaces network SQL, error: 26 - Error during the localization of the waiter/the authority specified) (Microsoft SQL Server, Error: -1)€?.
If somebody encountered this problem in the past, that he wants to inform well me of the solution which he found for this last. Thank you.
View 1 Replies
View Related
Jan 27, 2008
Hi,
I have problem during first configuration of Reporting Services from MS SQL 2005 Server Express with Advanced Services SP2. The error occurs when configuring virtual directory (Reporting Services Configuration Manager -> Report Server Virtual Directory). When I try to create new virtual directory I can see following messages:
Number of errors: 0
Create Virtual Directory
The virtual directory was created and assigned.
Changing Secure Connection Level
After last message Windows reports that SQL Server 2005 Reporting Configuration Tool has encountered a problem and needs to close (and I can send report to Microsoft).
IIS shows that virtual directory under default web site was created.
Evenet viewer (application log) shows .NET Framework 2.0 error:
EventType clr20r3, P1 rsconfigtool.exe, P2 9.0.3042.0, P3 45cd6ee2, P4 rsconfigtool, P5 9.0.242.0, P6 45cd6ee2, P7 15a, P8 5, P9 system.nullreferenceexception, P10 NIL
My environment:
MS SQL Reporting Services Version 9.00.3042.00
Windows XP Proffessional SP2
IIS 5.1
all components are fresh new installations. The only additional configuration I've made was adding IWAM_<hostname> as WebServiceAccount, all other configuration is default.
Any help would be appreciated.
Best regards
Slawomir Nasiadka
View 2 Replies
View Related
Jun 30, 2007
Hi
I installed on my XP machine iis and, SQL express and visual web developer.
now I need to configure the right parameters in the web.config file. (it was easy on SQL2000)
can anyone explain how to configure the web.config (in DNN 453) ?<!-- Connection String for SQL Server 2005 Express -->
<add
name="SiteSqlServer"
connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|Database.mdf;"providerName="System.Data.SqlClient" /><!-- Connection String for SQL Server 2000/2005
<add
name="SiteSqlServer"
connectionString="Server=(local);Database=DotNetNuke;uid=;pwd=;"
providerName="System.Data.SqlClient" />-->
</connectionStrings><appSettings>
<!-- Connection String for SQL Server 2005 Express - kept for backwards compatability - legacy modules --><add key="SiteSqlServer" value="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|Database.mdf;"/><!-- Connection String for SQL Server 2000/2005 - kept for backwards compatability - legacy modules
<add key="SiteSqlServer" value="Server=(local);Database=DotNetNuke;uid=;pwd=;"/>
Please assist.
thanks
View 1 Replies
View Related
Dec 9, 2006
Hello, I can't resolve the following problem, I think it is a very stupid task, but I can't find it:
0. I need to access to SQL dbs through jdbc from my java application. Before to create java I did as follow:
1. I installed SQL Server Express
2. I created a user with password (SQL authentication)
3. I set both Windows e SQL authentication in surface area cfg
4. I set only TCP/IP remote connections
5. I set specific port 1433 in the protocols tcp in "All IPs"
6. I can't connect through sqlcmd or osql.
7. I CAN connect through SQL Server Manager studio or how hell it is called!
The error is (I have italian version, so I try to transalte for you):
say user id is cometk and pass is 123
c:>sqlcmd -U cometk
Password: HResult 0x4818, level 14, state 1
Login failed for user 'cometk'.
HResult 0x2746, level 16, state 1
Provider TCP: Connection interrupted from the remote host
slqcmd: error: Microsoft SQL Native Client : connection error while communicating.
Can anyone help me? Can anyone guide me to configure SQL Server to make remote connections? :)
Thanks bye from Italy
CometKeeper... A Dream Guardian...
View 6 Replies
View Related
Apr 26, 2006
While trying to "Set Configuration Database Server" for Windows SharePoint Services I receive the error:
"Cannot open database "SharePoint" requested by the login.
The login failed. (Error code: 4060)"
I set up a test bed server 'SNET' with WinServer03 SP1, IIS 6. SQL Server Express, and SharePoint Services.
In "Set Configuration Database Server" I used:
Database server: snetsqlexpress
SQL Server database name: SharePoint (I know real imaginative)
Database connection type: * Use Windows authentication
X Connect to existing configuration database.
If I try "Use SQL Authentication"
"Login failed for user <username>. The user is not associated with a trusted SQL Server connection. (Error code: 18452)"
First let me say that while I'm not a newbie, as usual I've bitten off more than I can chew comfortably. Server '03, Active Directory, IIS 6, SQLExpress, and SharePoint are all relatively new to me, hence the test bed server, and I'm on a pretty steep learning curve.
But what's life without a challenge.
So the short and sweet of it is can somebody point me in the right direction to find the root cause of this error. I do have other programs running with this instance of SQLExpress and doing so quite happily. And I've given myself god privileges in AD just to try to get around this.
View 1 Replies
View Related
Dec 11, 2006
Hi,
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
Me.myTableTableAdapter.Update(Me.myDatabaseDataSet.myTable)
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
Thanks,
Ieyasu
View 6 Replies
View Related
Oct 16, 2015
how to configure sql express 2008 R2 on windows server 2008 R2 domain controller?? and one more thing, what log on should I use for sql express service in sql server configuration manager on domain controller??
View 2 Replies
View Related
May 21, 2015
I'm having issues with my sql server 2014 express configuration manager. I need to change protocols under Sql Server Network Configuration but there is nothing, no protocol listed, its empty.
View 3 Replies
View Related
Sep 13, 2006
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies
View Related
Aug 18, 2006
This problem only occurs after deployment, not when debugging. In the table I am having a problem with I have an ID field designated as the primary key with the identity increment set to 1 and the identity seed set to 1. There is no data in the table when deployed. I can add records to the datagridview control but when I try updating the dataset I get this error indicating that the ID field already has a value of 1 present. If I close the application and re-start it, the exception no longer occurrs when I update the dataset. I am including the code to update the tables incase something is wrong there. Any suggestions?
Private Sub UpdateMemberTable()
Me.Validate()
Me.TblMembersBindingSource.EndEdit()
Me.TblMembersTableAdapter.Update(Me.ChurchFamilyDataSet.tblMembers)
Me.TblMemberDependentsBindingSource.EndEdit()
Me.TblMemberDependentsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberDependents)
Me.TblMemberContributionsBindingSource.EndEdit()
Me.TblMemberContributionsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberContributions)
End Sub
View 3 Replies
View Related
Jun 13, 2007
Hi Guys,
I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]?
ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Your help much appreciated. Thanks.
Paul
View 8 Replies
View Related
Aug 8, 2006
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
View 11 Replies
View Related
Feb 22, 2008
This is what I have done.
1. Installed VB.NET IDE 2008 and SQL Server Compact 2005. IDE requires upgrade of database to 3.0 version which I allowed it to do. After the database was upgraded, I did an amount of coding work in the IDE and then tried to go back to do more database work in SQL. However the database then could not be opened in SQL Server Compact 2005. An error said that because it had been upgraded, it could not be read. It was requiring me to run 'upgrade.exe'. I had no idea what this meant and could find no upgrade available online.
2. Removed VB.NET IDE 2008 and installed 2005 instead. However, the file extension on the SQL Server Compact database is .sdf, but the IDE is requiring a .mdf extension. I have tried everything I can think of to get it to save or to have the desired extension, but I cannot.
Questions:
1. Do SQL Express 2005 and VB Studio Express 2008 work together?
2. If so, how?
It seems as though application each requires a different version of the database. If the database is usable in one, it is not usable in another.
Thanks for the help.
Julie
View 3 Replies
View Related
Jan 11, 2007
I have a 2005 Express DB I wish to attach to using the 2005 Mgt Studio Client (Not the express version, but the full blown 2005 Mgt Studio Client from the SQL 2005 Standard Edition Install disk). Can this be done, or can I only use the 2005 Mgt Studio Express Edition Client?
Thanks in advance.
M. Scott Blalock
View 1 Replies
View Related
Oct 5, 2007
I'm a Network Administrator that has to do everything from desktop to server, to routing, and DBA so I need a bit of advice. Stretched thin for time and knowledge in the SQL area and trying to do the best I can.
I currently have a MS SQL 2000 database that is 60GB in size for MS Dynamics 8.0 and one that is 2GB that I want to move to a new server.
I've setup and tested it and it all works, now I'm looking for some Best Practices information for best performance. Currently doing about 3,000 transactions a day.
Server is HP ML350-G5 2 Xeon Dual Core 2.0GHz CPUs w/16GB RAM w/external drive bays running 72GB 15K SAS drives with SMART ARRAY P800.
OS is Windows Server 2003 Enterprise w/SP2 - MS SQL 2005 Standard
I have the following drive configurations setup.
C:(RAID1+0)OS - SQL 2005
D:(RAID1+0)Dynamics Application Shared dictionary files for clients
G:(RAID0)BACKUPS (see note below about TEMPDB) I also have a 25GB swap file on this drive maybe better to put in on the D: volume if I put TEMPDB here
H:(RAID1+0)LOGS (2 user db logs and the tempdb log)
I:(RAID1+0)DATA (2 user db - [model, msdb, master]
Recently found that my G: drive (RAID0) only has space for 2 backups (poor space planning on my part) before I need to move the files. Normally I backup the DB with BackupExec 10.1d just fine in about 2 hours over the wire at night since no one is in the DB at night.
Was wondering if putting my TEMPDB there on (RAID0) would be advisable or not. In SQL 2005 it gets rebuilt each time SQL is restarted so it would seem that ensuring it's on a RAID1 or RAID1+0 might not be as necessary as say the DATA files.
Then if I really wanted to I could actually do backups on the I:DATA drive at night and then use TAPE to back that up, and use an automated script to move them off to offline storage once the TAPE backup is done.
For the [model, msdb, master] should they need to be on the I:DATA drive or just leave them on C:OS ? Not sure how much they're actually used.
Also doing some brief testing the Microsoft Dynamics was much slower on the new Server than it was on the original. Odd to me since the new Server is like a McLaren F1 racing a Ford Pinto. The old server is running a single P4 CPU and 6GB RAM
I've set MS SQL 2005 to use 12GB of RAM on the new server so as to leave 4GB for other Server tasks.
I ran the Maintenance Wizard and had it do checks and defrag and index rebuild etc... so not really sure why the speed would be noticeably slower. One thing I did notice is that once a screen query was ran then the next time it was a bit faster but overall I was expecting to see the screens fly by on this new hardware and SQL 2005 but it doesn't really do that.
I've read some of the white papers etc for tuning, but wow I just don't have unlimited hours to do all this analysis, there seem to be hundreds of pages to read on that type of stuff.
Thanks in advance for the advice.
View 20 Replies
View Related
Apr 26, 2006
Hello,
I've got two problems when attempting to set up SQL Server 2005 Agent. Any help on either of these would be greatly appreciated.
1.) When I go into properties of SQL Server Agent and then to history. I check the Automatically remove agent history checkbox and set the time delay, but it doesn't stay checked when I exit and look again. Does anyone know how to fix this or even better the specific registry key I can change to force it? I believe it is in HKLMSoftwareMicrosoftMicrosoft SQL Server(Instance)SQLServerAgent
2.) On SQL Server Agent properties in General I have changed the location of the log file so instead of D:Program FilesMicrosoft SQL ServerMSSQLLOGSQLAGENT.OUT it is E:SQLLogsSQLAGENT.OUT However when I go through Management Studio to view them it says "Unicode File Expected", even though SQL Server is creating the files and automatically rolling them over (I do have Write OEM error log and include execution trace messages checked and am logging Errors, Warnings and Information).
Any help would be greatly appreciated.
Thanks,
Aaron Lowe
View 4 Replies
View Related
May 31, 2007
I am working on creating a configeration database based on the information pulled from a large number (over 40) of servers. I am newly out of college and don't have a lot of experience with things like this, but I am trying to create a configuration database. I need to know the best way to create a connection to all of the SQL servers on my network and then automate the pulling of data from these SQL servers. The types of data I would need are things like Instance ID, DBMS Version, Database Properties, Database Name, Modification Date, Last full backup, last transaction log backup, etc. I have been pointed towards either working with OSQL/SQL CMD, in which case could someone please point me towards a guide, and SSIS, I am reposting this thread in the SSIS area. I need to take all of the gathered data and place it into a central repository database after formatting it. Any help is greatly appreciated.
-Kyle Schlapkohl
View 3 Replies
View Related
Nov 22, 2007
Hi,
I have a requirement sql server 2005 in which i need to send a mail when ever there is an error in the procedure or job.
The mail should fire with the error attached to it.
could you please suggest the ways to handle this.
Please tell me the list of steps to configure and send the mail.
Thanks in advance.
View 1 Replies
View Related
Feb 27, 2006
Hi,
A couple of small questions for anyone who can help. I am writing an application and am a newbie with SQL Server 2005 Express Edition and Visual C# (using Visual Studio 2005 pro).
My application will need to run on 6 different PC's at one time with our office server hosting the database. Since the server is hosting the database, is it necessary for the individual PC's to have SQL Server 2005 Express Edition installed on their hard drives also to communiucate back to the server?
Also, where can I find some nice example code for connecting and performing some simple tasks under C#?
View 1 Replies
View Related
Jun 28, 2006
I'm getting an error when the SQL install program checks the system - "The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine DI-ERP2 Error:2148007941 (0x80080005).
I've tried a bunch of stuff as suggested by some of the other threads, but nothing is working so far...
Any ideas would be greatly appreciated.
View 7 Replies
View Related
Oct 4, 2006
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
View 1 Replies
View Related
Jun 22, 2006
Hi all,Just wondering if SQL 2005 express edition can be connected remotely. I've set up SQL 2005 Express on a separate machine and am having trouble connecting to it from VWD when creating the websites. Currently I've set up ASP.NET 2.0 Framework on the remote machine with IIS6 using Windows Server 2003 Web Edition. And I am directly editing the website remotely on the server machine from my PC. Could someone please help me in setting up a remote connection from VWD to the SQL Server?I've enabled TCP/IP setting in the SQL Configuration Manager but still getting errors. Could this be an issue with Express Edition? Because if it is I also have a copy of SQL Server 2005 to install. Any direction to resolve in this issue would be greatly appreciated.PS. I'm new to this so pls bear with me. Thanks.
View 1 Replies
View Related
Jan 10, 2006
I use Visual Web Developer Express 2005 with SQL Server 2005 Express. With this combination I was able to create a new database.I can add tables, views etc.But no triggers....do you guys have an idea how I can add a new trigger?Please help!
View 1 Replies
View Related
Dec 9, 2006
This is a question about the movie collection starter So here it is:
I am running Vista RC1 (Build 5600) and vb express 2005
I downloaded and install SQL Server Express 2005 Edition SP2 - Since SQL Server Express 2005 Edition SP1 does not work with Vista
But when I try to run the collection app or if I try to download and install the Amazon version I get the following error message:
There was a problem loading data: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be cause by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I need any advice you can give me to solve this problem, how to change the default settings, because I do not know where to start.
Thanks
View 3 Replies
View Related
Sep 25, 2006
Hello,I am trying to connect to a DB, which is hosted on an SQL Server 2005 by a provider, using ASP.NET Configuration Tool. The result is the following error when I click on the Security Tab:---There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) ---The hosting provider checked that my connection string is correct. They do not know why I get the error, though. Here is a relevant snippet from my web.config:<connectionStrings> <remove name="LocalSqlServer" /> <add name="LocalSqlServer"connectionString="Data Source=ABC;Integrated Security=false;Initial Catalog=ABC;User ID=ABC;Password=ABC"providerName="System.Data.SqlClient" /></connectionStrings>ABC is a mock :)Could anyone pls help? It is much appreciated.
View 4 Replies
View Related
Mar 20, 2007
Does anyone have a good starter's tutorial on authorization advice & configuration for SQL Server 2005?I need to know what is adviced what web users can specifically do and dont in my db, and how to configure that...Thanks!
View 1 Replies
View Related
Jun 20, 2007
Hi,
I've encountered this error when opening up http://localhost/ReportServer/
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServerRSReportServer.config' is denied.
Here is the log info:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.1399.00</Product>
<Locale>en-US</Locale>
<TimeZone>Pacific Daylight Time</TimeZone>
<Path>C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFilesReportServerService__06_20_2007_10_08_12.log</Path>
<SystemName>CSD060266</SystemName>
<OSName>Microsoft Windows NT 5.1.2600 Service Pack 2</OSName>
<OSVersion>5.1.2600.131072</OSVersion>
</Header>
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing ConnectionType to '0' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
ReportingServicesService!library!9!6/20/2007-10:08:13:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
ReportingServicesService!resourceutilities!9!6/20/2007-10:08:13:: i INFO: Reporting Services starting SKU: Developer
ReportingServicesService!resourceutilities!9!6/20/2007-10:08:13:: i INFO: Evaluation copy: 0 days left
ReportingServicesService!runningjobs!9!6/20/2007-10:08:13:: i INFO: Database Cleanup (NT Service) timer enabled: Next Event: 600 seconds. Cycle: 600 seconds
ReportingServicesService!runningjobs!9!6/20/2007-10:08:13:: i INFO: Running Requests Scavenger timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!9!6/20/2007-10:08:13:: i INFO: Running Requests DB timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!9!6/20/2007-10:08:13:: i INFO: Execution Log Entry Expiration timer enabled: Next Event: 57106 seconds. Cycle: 86400 seconds
ReportingServicesService!runningjobs!9!6/20/2007-10:08:13:: i INFO: Memory stats update timer enabled: Next Event: 60 seconds. Cycle: 60 seconds
ReportingServicesService!runningjobs!9!6/20/2007-10:08:13:: i INFO: SQM timer timer enabled: Next Event: 60706 seconds. Cycle: 86400 seconds
ReportingServicesService!library!e!6/20/2007-10:08:13:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details., Cannont get edition information from catalog server;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details.
ReportingServicesService!library!e!6/20/2007-10:08:44:: i INFO: Exception dumped to: C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesLogFiles flags= ReferencedMemory, AllThreads, SendToWatson
ReportingServicesService!library!e!6/20/2007-10:08:44:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException: An internal error occurred on the report server. See the error log for more details.
at Microsoft.ReportingServices.Diagnostics.Sku.EnsureCorrectEdition(SqlConnection sqlConn, String connectionString, Boolean checkRestrictedSkus)
at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectEdition()
at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage()
at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread()
ReportingServicesService!library!e!6/20/2007-10:08:44:: Attempting to start service again...
I've been doing all I could think of: reinstall the whole SQL server and its services; stop and restart SQL server service and Reporting service.
It could be my SQL version has a problem...not sure....
I could not think of anything else.
If you have any thoughts about it, please do reply.
Any suggestion is highly appreciated. Thank you...
View 3 Replies
View Related
Mar 9, 2007
I have SQL 2005, and Reporting Service has been uninstalled and reinstalled,
go through each step of confiugration until Encryption Key, for some reason,
the backup button is grayed out, only "restore" button is clickable, as well
as Delete, but we never backup the key before, so this is really strange
since we do not have backupkey, so we cannot restore.
we tried "Delete", then we got the following error:
ReportServicesConfigUI.WMIProvider.WMIProviderException: The encrypted
value for the "LogonCred" configuration setting cannot be decrypted.
(rsFailedToDecryptConfigInformation)
at
ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo)
at
ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.DeleteEncryptedInformation()
Browse report manager and reportserver also got the same error, run
rskeymgmt -d, does not help either
Any suggestion?
Thanks
Don
View 10 Replies
View Related
May 3, 2007
Hi All -
I am trying to configure reporting services on virtual machine but unable to succeed. I never touched this topic before SQL Server 2005. The left hand side options in Reporting Services Configuration Manager such as Server Status, Virtual Directories, Web Identity works fine but it fails in Database Setup section
Here are the details:
AppServer: SQL Server 2005 Reporting Services & Client components build# 2153 (with SP1 & SP1 hotfix)
going to apply SP2 and Add-on component after the configuration
DBServer: SQL Server 2005 Database Services & Client components build# 2153 (with SP1 & SP1 hotfix)
OS: Windows 2003 Server with SP1
IIS version on AppServer: 6
I have SQL 2005 Reporting services and 2005 Database Engine on 2 different machines.
Here is the error message I am receiving when I try to apply the script in "Database Setup" section of Reporting Services Configuration Manager
It did not log any errors in SQL Server however it shows a warning message in Event Log
Event Log message - "The RSReportServer.config file has been modified."
Configuration Manager error message - It shows me "Create a Grants Rights Script" task failed
"System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.ReportingServices.Diagnostics.WebUtil.GetIPAddresses(String machine)
at ReportServicesConfigUI.Panels.DatabaseSetupPanel.IsLocalDbServer(String dbServer)
at ReportServicesConfigUI.Panels.DatabaseSetupPanel.SetDatabaseConnectionTask(String connectionString, String server, String database, ConfigurationCredentialsType credsType, String account, String password, Boolean upgrade, String dbVersion)"
I have captured the screenshot, let me know if I can send this.
One of my friends suggested the following and I have tried the first option but could not work - Option I)
Our account that is used for database connection should have
1) public and RSExecRole roles for the ReportServerDatabase.
2) RSExecRole roles for the master, msdb , and ReportServerTempDB databases.
Else - Option II)
we can run the Reporting Service Windows Service under the local System Account and then the credentials type for the database set up would be Service credentials. This way we would have more permission.
Did anyone face this problem? how should I resolve this?
Anyone have steps to follow as I feel of missing something in the configuration steps?
Any information/ suggestions/ pointer on this are higly appreciated.
Thanks in advance !!
-Satya
View 2 Replies
View Related
