ASP .Net Data Provider
Mar 7, 2008
I am currently learning ASP.Net and am having problems with my SQL Server database. I am using the ASP.NET Configuration Provider tab to setup AspNetSqlProvider as the provider but i get the error 'Could not establish a connection to the database.' So I then went to the Aspnet_regsql.exe tool to install the database elements on my local PC. I use Windows Authentication to connect and enter the server name and <default> database but it fails with error 'Unable to connect to SQL Server database'. But i can logon to the SQL Server 2005 using the same user. Can anyone point me in the right direction please.
View 1 Replies
ADVERTISEMENT
Jun 26, 2007
Hi,
After reading this helpful blog entry:
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I think this might be a good place to ask the following question.
I am writing the error handling code for my data access layer for a web application. I am using the Enterprise Library Data Access Application Block. Although this supports generic database connections, I realized that I need to handle errors specific to each database type. Microsoft SQL is the only database type I am using for now, so I am using a try...catch (SqlException e).
In testing my code, I intentionally changed the instance name in web.config to a name that does not exist. I get the very popular error 26 - Error Locating Server/Instance Specified. This is returned as a SqlException, but the SqlError.Number property is set to -1.
Am I getting "-1" because the provider hasn't actually connected to SQL yet, so it doesn't have an actual SQL error number?
Can I assume that (SqlError.Number == -1) is always a fatal, provider-level connection exception?
Will the provider ever use another SqlError.Number of its own? Or do all numbers besides -1 come from the SQL sysmessages table?.
Is there a comprehensive list of what exceptions might be raised by the SqlClient provider, including #26?
The reason for all the questions is that in a web application, I want to prevent the end-user from seeing the "real" exception if it has to do with configuration errors. However, maybe there are other errors that the user should see and handle? It's hard to know without a full list of SqlClient provider errors, along with the SqlError.Number that each error maps to.
Thanks and regards,
Mark
View 6 Replies
View Related
May 15, 2006
Recently I installed the .NET data provider for Teradata.
In a regular C# application I can add the namespace, "using
Teradata.Client.Provider;" to connect to this data provider
directly without going though ODBC or OLD DB so I know it works.
However, when I open Reporting Services (new project -> Business Intelligence
Projects) I do not see how to add the Teradata .NET provider. I only
see the same standard data types as before. I have searched and I do
not see how to add the Teradata .NET provider to the available "Type"
list when you click €śAdd New Data Source€? to your report.
Thanks!
View 12 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 2 Replies
View Related
Nov 28, 2006
Hi all,
While working on the Integration Services project.
When I try to create a new Data Connection in Connection Managers for ADO .NET SAP Provider, it gives the following exception:
TITLE: Microsoft Visual Studio
------------------------------
Could not set the connection qualifier for the current connection.
------------------------------
ADDITIONAL INFORMATION:
Could not create a connection for the provider invariant name 'Microsoft.Adapters.SAP.SAPProvider'. Verify that this provider is installed correctly on this computer. (Microsoft.DataTransformationServices.Design)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=CouldNotCreateConnection&LinkId=20476
------------------------------
Object reference not set to an instance of an object. (Microsoft.Adapters.SAP.SAPProvider)
------------------------------
BUTTONS:
OK
------------------------------
Can anyone describe, what is the resolution for the same.
View 1 Replies
View Related
Jan 23, 2007
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am getting this error and using this connection string
Data Source=192.168.0.100;Network Library=DBMSSOCN;Initial Catalog=ENet;User ID=eonline;Password=eonline;
What can be solution for this.
View 4 Replies
View Related
Mar 10, 2008
Hi, I am working on VS 2005 and using SQL 2005 Express and i am processing excel files and inserting records in data base as i processing starts and almost after processing 600 i got this error provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server. how can i solve that thanx
View 3 Replies
View Related
Apr 15, 2008
Hi,
My .NET 2005 application is on a server outsite company's domain. SQL server is in domain and port for sql server is open. TCP/IP is set for remote connection in SQL Server. Connection string in .config is
<add name="X_Conn" connectionString="Data Source=XXX;Initial Catalog=XXX;User ID=XX; Password=XXX;" providerName="System.Data.SqlClient"/>
I receive the error below:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
thanks a lot in advance!
View 3 Replies
View Related
Apr 26, 2007
We just changed the dev environment to sqlagent. From then we were unable to see the reports on the report server because:
An error has occurred during report processing.
Cannot create a connection to data source 'IHRSDataSource'.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this error is cropping up.
To Resolve this issue, we checked the Surface Area Configuration and also checked the Reporting Service Configuration . There seem to be no problem and everything looks ok.
Please help me in resolving this issue.
View 4 Replies
View Related
Apr 14, 2007
After I installed the various service packs via Windows Update, my WindowsForms application can no longer connect to the server.
The error message is:
provider: Named Pipe Provider, error: 40 - Could not open connection to SQL server.
However, the Reporting Services work just fine.
Please help.
View 1 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 1 Replies
View Related
Feb 20, 2006
Hi All,
I am new to dotnet. I tried connecting to the database MS SQL Server 2000. I gave the code like, the one below, in form load event,
SqlDataReader dr = null;
SqlConnection myConnection = new SqlConnection("Data Source=IP;Initial Catalog=name;User Id=uid;Password=pwd;");
myConnection.Open();
myConnection.Close();
But I could not connect. The error message highlights the line myConnection.Open() and displays the error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It tries connecting to SQL Server 2005. There is no SQL Server 2005 in that system. There is only SQL Server 2000.
I have the aspx code in my local system and the database in another machine.
Could Someone please help me out in solving this problem.
Thanks,
Arun. S
View 26 Replies
View Related
May 20, 2008
hi all
I realised this has been done to death, and so much information out there but I am still in a quandry.
I have had to rebuild my computer.
This is what I did
XP machine
using SQL Server 2005 Standard Edition
using Windows Authentication
NZ6(MSSQLSERVER)
straight default install all the way
unfortunately when ready to run reports from my instance(computer)
I received the error as in provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
thought I had it all okayed but obviously something not right
so ended up unistalling then - did the following:
Load SQL Server from disc1 and start install
failed on alter Counter Registry key error
fixed this from KB article (known error that can happen)
restarted
Went to Windows Update
check IIS is installed - tick is on - IIS - admin tools - make sure asp2 is associated - yes ok
Then back to install sql server - there is no instance set up yet
Disk 2 and setup .exe
All ok on Reporting Services, Analysis etc.
But once again all seems fine but still getting the error:
connection is all fine in Management Studio - eg I can see tables etc
connection is all fine in Business Intelligence - eg I can preview my reports
I then can deploy up to - NZ6
open NZ6
eports
report is there fine - but just errors
some simple little tick that I have not done!!
I seem to have checked and rechecked everything and obviously doing another re-install does not seem a logical step from here.
I will continue to check but if someone jump in and advise please would be great.
cheers
jewel
View 6 Replies
View Related
Oct 15, 2007
Hi
I am creating a web site using Visual Studio 2008 & trying to connect to database on SQL Server 2000. My test connection is successful but while debugging the page I am getting this error :
" provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server "
Your suggestions on that will be appreciated.
Thanks
Ashok
View 5 Replies
View Related
Aug 27, 2007
Guys!
has MS done Anything about this issue? I am running NT2K and have the same issue y'all having
provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Does anyone have a fix or a workaround that will work once the application goes live?
View 1 Replies
View Related
Apr 3, 2007
Hi,
Am getting the followning error:
{"An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)"}
from my application where 3 service references had been added
and hav added this segment in app.config file
<configSections>
<section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null" />
</configSections>
<dataConfiguration defaultDatabase="Connection String" />
<connectionStrings>
<add name="Connection String" connectionString="Data Source=DPA1W075Binstancename;Initial Catalog=SoapBox;Integrated Security=SSPI;"
providerName="System.Data.SqlClient" />
</connectionStrings>
Solutions recommended for this were start running the SQL browser instance and enable Namespipes in Sqlserver configuration manager.Did both.. but nothing worked.
Still getting the same error..
Can somebody plz help me?
View 2 Replies
View Related
Jul 21, 2007
Hi guys, I have a problem with error: 40.
I made a Web page, and it works perfect on my local machine, everything is OK, until I uloaded page to the server, it reports this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.WebControls.Repeater.GetData() +50
System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) +232
System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) +53
System.Web.UI.WebControls.Repeater.DataBind() +72
System.Web.UI.WebControls.Repeater.EnsureDataBound() +55
System.Web.UI.WebControls.Repeater.OnPreRender(EventArgs e) +12
System.Web.UI.Control.PreRenderRecursiveInternal() +77
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
I dont't Know what to do. Please HELP!
View 6 Replies
View Related
Dec 1, 2007
Hi all,
I am currently on XP x64 and am trying to run a .vbs file, which needs access to an access file when the following error pops up:
"Provider is not specified and there is no designated default provider"
error code: 800a0ea9
source: ADODB.Connection
I have tried a bunch of stuff, but so far nothing has worked.
The following code is is question:
set AccessDB = CreateObject("ADODB.Connection")
AccessDB.Open("DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & sMSAccessDBPath)
any help would be appreciated......could I run this with cscript.exe (in the WoW64 folder) in through cmd.exe?
Thanks in advance for you help.
Jonathan
View 1 Replies
View Related
Apr 4, 2008
I've just posted mywebsite andthis error keep being trhrown as soon as I access the DB
I dont understand what is going on and if I dont get it working bu today will delivery date will expire and I will get in trouble...
So anyone knows what is going on
It says the following:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is my con string :
<add name="ASPNETDBConnectionString" connectionString="Data Source=p3swhsql-v09.shr.secureserver.net;Initial Catalog=myCatalog;User ID=MyID;Password='Mypassword"/>
Thanks a lot
View 4 Replies
View Related
Oct 22, 2006
I am getting the following error when i try to connect to the my web site using froma different server. A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) i am using sql express and i attach the database through the connection string in the web config. Any ideas
View 1 Replies
View Related
Nov 26, 2007
Hi there,
I am trying to use the new ListView control in VS2008 in an ASP.Net app. My problem starts already with the datasource. I drag and drop a SqlDataSource and select
Microsoft SQL Server Compact 3.5 (.NET Framework Data Provider for Microsoft SQL Server Compact 3.5)
I can connect to the database and test the query in the wizard (I do not need to use a password??)
This is the webconfig entry
<add name="ConnectionString" connectionString="Data Source=C:Program FilesMicrosoft SQL Server Compact Editionv3.5SamplesNorthwind.sdf" providerName="Microsoft.SqlServerCe.Client.3.5"/>
I add the following line in the page load event
AppDomain.CurrentDomain.SetData("SQLServerCompactEditionUnderWebHosting", true);
However I get the error message that the data provider cannot be found and it might not be installed. I added the reference and also gave the folder above ASP.NET full access rights.
Anyone else encountered this problem. It is quiet strange? Thanks a lot for your help.
Cheers,
Chris
View 2 Replies
View Related
May 23, 2006
I created a membership database on my local computer. DB is SQL Server 2005. I created create sripts for that database and created this database in a SQL Server 2000 instance on another box.As soon as I changed my web.config file
to point to the new database, I got this error below. What is causing
it?The 'System.Web.Security.SqlMembershipProvider' requires a
database schema compatible with schema version '1'. However, the
current database schema is not compatible with this version. You may
need to either install a compatible schema with aspnet_regsql.exe
(available in the framework installation directory), or upgrade the
provider to a newer version.Do I have to create a local Membership database in a SQL 2000 instance, script it out and then create in the other box?Thanks
View 1 Replies
View Related
Jan 9, 2008
Hi,
how do you pass parameters into a SQL statement to run in an Oracle database when you use the OracleClient Data Provider?
thanks in advance
Peter
View 3 Replies
View Related
Oct 2, 2007
Hello:
Is it possible to import "IBM DB2 UDB for iSeries .NET data provider" into Reporting Services 2005? I tried to do it but was unsuccessful. I'm attempting to access data on our IBM i-Series(AS/400) and I need to pass parameters in my datasets. I appreciate any assistance you can give me.
Best regards
View 6 Replies
View Related
Mar 13, 2006
I am new to SSIS but I am learning fast. Any help is greatly appreciated.
I have written a custom log provider derived from LogProviderBase. I want to programmtically add the custom log provider to my package, but when I try this:
myPackage.LogProviders.Add("ACustomLogProvider");
I get the following exception:
"The log provider type "ACustomLogProvider" specified for log provider "{..GUID..}" is not recognized as a valid log provider type. This error occurs when an attempt is made to create a log provider for unknown log provider type. Verify the spelling in the log provider type name".
I have followed the instructions in BOL and as suggested in this forum, adding the DtsLogProvider attribute:
[DtsLogProvider(DisplayName="ACustomLogProvider", LogProviderType="ACustomLogProvider", Description="a description")]
Another way I tried is that I added a GUID attribute to my custom log provider class and then tried this:
Type aType = typeof(ACustomLogProvider);
Guid aGUID = (Guid)aType.GUID;
myPackage.LogProviders.Add("{"+ aGUID.ToString() +"}");
This also gives me the same exception "The log provider type ""{..the actual GUID for ACustomLogProvider..}" specified for log provider "{..a different GUID..}" is not recognized as a valid log provider type....
My questions are: Is it possible to add a custom log provider programmtically or must it be done through the SSIS Designer?
Must I deploy my custom log provider class for it to work programmatically? (I had perhaps wrongly assumed I would not have to deploy if I don't want it to show up in the SSIS Designer).
I would prefer to use a custom log provider instead of just logging within the SSIS event handlers because I can override the OnPostExecute, etc. but I cannot (can I?) override the specific event handlers like PackageStart, PackageEnd, etc because they are not exposed through DTSEvents.
Any help I would be very grateful for. Thanks.
View 8 Replies
View Related
Oct 10, 2007
I have an ODBC connection setup for Oralce RDB. This works fine in say MSAccess. Now I would like to add a SQL Server Linked Server to this ODBC driver (it is for RDB not regular Oracle), but I am not able to get this to work. What is the Provider String and Location / Catalog for using this type of ODBC? I setup DSN as 'name', Provider String as 'UID=user;PWD=pass;' and it seems it tries to connect but gives an error. "%SQL-F-SCHNOTDEF, Schema USER is not defined"
Any help is greatly appreciated.
View 3 Replies
View Related
Dec 12, 2005
Well, I hope, after my endless search in the web... maybe, somebody can help me here.I'm passing a application to a web-based application, therefore I have to use ADO.net to access a sql server DB. But the performance is extremly poor!!!!Just to compare: with the normal application or with the SQL Query Analyzer, the query needs about 2 seconds. Well, by using ado.net, it's about 200 seconds......!!!!Of course, the query is quite long. But the difference is extrem... too extrem for using the same query....I already tried a lot... actually everything I found on the web. What is really strange is that neither the processor nor the memory is fully used... And the web server use more of the cpu power than the sql server itself (the 2 server are still on my machine where I'm programming). So, could it be that the problem is by filling up the dataset with the sqladapter or something similar?Thx for your help!!
View 8 Replies
View Related
Apr 10, 2007
Hello,
I am doing a customer data provider dataextension such as FsiDataExtension.
But I want to know how to debug it?
Thank you.
Jeffers
View 1 Replies
View Related
Oct 17, 2007
Hi,
I am trying to do this select over a SAP table:
select * from KNA1
But in DataReader component raises an error pointing that Z_EXTRACT_DATA_FULL function module can't be found.
Anyone know where is the problem??
Thanks!
View 5 Replies
View Related
Feb 16, 2006
I am new to SQL server so apologies if this is a stupid question.
I have a website built and hosted by another company, with SQL server
back end data. They don't want to analyse the data but I do. I am
familiar with SQL and have SQL server express running on my laptop.
So I was thinking I could get them to send me the data from the server
(it will be less than 1GB I imagine), and I could analyse it myself.
So my questions are:
will this work?
and what do I ask them to send me? Is it just a couple of files they
have to copy and send me? Or is it more complicated than that?
Many thanks for any advice you can offer.
James
View 1 Replies
View Related
Aug 3, 2006
Oracle recently released Oracle Data Provider for .NET (ODP .NET) 10.2.0.2.20. It happened on August 1, 2006. Oracle claims that its software is compliant with Microsoft ADO.NET 2.0 and €ś€¦more flexible, faster, and more stable€¦.€?. On top of it Oracle introduced many new features €ś€¦ not available from other .NET drivers€¦€?.
http://www.oracle.com/technology/tech/windows/odpnet/index.html
I decided to give it a shot and try in SSIS.
I installed ODP.NET on my machine and it works just fine in PL/SQL Developer
Next, I opened Data Source Wizard in BIDS for SSIS project.
I see Oracle Data Provider for .NET option is enlisted under .NET Providers node on a tree. But when I select it, I am getting an error dialog:
Failed to find or load the registered .Net Framework Data Provider.
So what could be done in such scenario?
Regards,
Yitzhak
View 5 Replies
View Related
Sep 14, 2007
Hi guys, I recently developed a website for one of my client and today client report that i face random error sometime when i access some pages.The complete error description are shown below.A transport-level error has occured when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available. Can any one told me from which reason this error generated and how to resolve it, Client host website on shared hosting plan and uses SQL SERVER 2005 as database management system.Thanks.
View 1 Replies
View Related
Jan 31, 2006
I am using OleDbMicrosoft OLE DB Rpovider for Visual FoxPro for my Data Source Connection and it includes the deleted records from the Visual FoxPro database, how can it have it ignore the deleted records?
HELP!
Thanx
Moshe
View 5 Replies
View Related
