ASP And SQL 2005 Passing And Returning Parameters Doesn't Work...help!!!!!
Feb 29, 2008
Ok, I'm a long time reader of this forum and just about everytime I come here looking for an answer its allready been posted and answered. But I can't seem to find this one anywhere. Sorry if its allready been posted...Just point me in the right direction.
Ok, Ive been coding in VB2005 for a while but i'm new to SQL stored procedures. This is prolly going to sound stupid but I don't know where to start. Heres what I need to do.
I have a stored procedure that requires a parameter. I can pass that parameter to the stored procedure and execute it just fine. But I need the result thats returned when the stored procedure is executed. I can't seem to find anyway to return the Result back to me. DataReaders keep blowing up and I have no Idea Why????? Here is how i'm passing the param to the stored proc.
I'm running MS SQL BTW.
Dim myConnection As New SqlClient.SqlConnection("yadayada;Database=BlaBlaBla;Trusted_Connection=True;")
Dim cmd As New SqlClient.SqlCommand("NameOfStoredProc")
sqlParam.Value = Address 'declared higher up.....its just an int
myConnection.Open()
cmd.ExecuteNonQuery()
myConnection.Close()
Thats all great, but I need to read back the results the stored proc returns. If I execute this in server management studio, it returns a result. But nothing I try in my asp page works. Any help would be Great. Code samples are good too.
Has someone managed to pass successfully a variable from a parent package to a child package? I€™ve tried a zillion permutations and I can€™t get it to work. The strange thing was that I was able to successfully do this with pre-RTM builds. Basically, what I am trying to do is:
The parent package has a variable, e.g. ExecutionID which I set using a script to System::ExecutionInstanceGUID. I verified that the variable is set correctly by dumping it to a SQL Server table. I created a child package variable with the same name. In the child package, I€™ve created a parent package configuration that points to the ExecutionID variable. I am trying to read the variable in a Derived Column Task in which I have a column linked to @ExecutionID. This doesn€™t work. Step-by-step instructions from someone who managed to concur this will be greatly appreciated.
Oh, I didn€™t have any luck hitting a breakpoint in a script task inside a child package with both in and out of process execution also.
It's well known issue, that one can't use any dataset fields in a report header/footer directly. One of the approach is to create query-based parameter that basically equals =First(Fields!@FieldName@.Value, "@DataSetName@") and use that parameter value instead. But it doesn't work in my case!
My report displays some entity description and is parametrized with EntityID param. Its header contains entity name that, according to the approach, is queried from the data source through the EntityName report parameter. There's important issue: the report is displayed in ReportViewer control, that is embedded into my application and entity ID parameter isn't ser by user in ReportViewer parameters area. Its default value is changed by the application with SetReportParameters() web method every time a user wants to view the report according to the entity the user is exploring in the application. But after the report has been rendered, its header always contains not actual (outdated) entity name. Nevertheless, the report body contains actual data (including entity name). If I alter entity ID parameter in ReportViewer or in web-based Report Manager and refresh report, header displays correct entity name.
Hello all, I have two mult-value parameters in my report. Both of them working with selecting one or more values. But, when I test using "(Select All)" values for both parameters , only one parameter works. The "available values" for these two parameters are both from the data set.
select distinct ProductType from Product order by ProductType
The UpdateTrackingCS program will call a stored procedure to get the inserted data and update other databases. And the reason to put the commit statement in sql2000 is to have sql commit the transaction, so the store procedure in UpdateTrackingCS can query thtat inserted records.
When I use the same code in SQL2005, no matter what I do the UpdateTrackingCS program cannot query the data by the UPSID. It always says record not found.
I have tried to change commit to begin trans ... commit trans. But nothing works. Please help!
The UpdateTrackingCS program will call a stored procedure to get the inserted data and update other databases. And the reason to put the commit statement in sql2000 is to have sql commit the transaction, so the store procedure in UpdateTrackingCS can query thtat inserted records.
When I use the same code in SQL2005, no matter what I do the UpdateTrackingCS program cannot query the data by the UPSID. It always says record not found.
I have tried to change commit to begin trans ... commit trans. But nothing works. Please help!
I have an active x script written in vb that just counts the records in a table and fails the step if there are not enough records. It is simple and effective. But when I transfered this task to my SSIS package I get a function not found error.
I am not familiar with active x or vb script so I have no idea what is wrong. I can do without while I build the package but I need it in the end to prevent possible problems....
I have Vista Ultimate installed and within Vista .NET Framework 3.0 is installed as a part of the operating system so I can't remove 3.0 Now for MS SQL Server 2005 Express I need .NET Framework 2.0 and the SQL Server 2005 doesn't work with .NET Framework 3.0 Can't install 2.0, get the message that 3.0 is already installed. Is there another version of SQL Server that works with .NET Framework 3.0 and runs under Vista Ultimate? Please help me!!
Hi all, We have a SQL Server 2005 64-bit, and recently I upgrade from build 3042 to 3054 and I try to do a maintenance plan for transaction logs(TL) backup, including cleanup for two days (have full backup every night).
Problem I have is that I want the TL files to dump in a different location(due to disk space), so I put in the UNC path in the "Create a backup file for every database - >Folder:\FileServerTLDBLogs"
NB: if using the local drives, it work
Check List Security: - The account that I used to create the plan is an sa account - The location that I dump the TL files, I have full access to the folder
SQL Statement: exec xp_cmdshell 'dir FileServerTLDBLogs' (it list all files)
Is this a bug for 64-bit? because I can do this on SQL Server 2005 32-bit and it's work perfectly
When I try to add a SQL Server Database as a new item into the App_Data folder of my Web Project, I get this error demanding that SQL Server Express has to be installed. That is the stupidest thing I have ever heard of. Is there some setting or something to make VS 2005 Pro work with a standard SS database? I don't want to use the express edition. I can't use SS's management studio with that.
Does Microsoft monitor this forum? I thought they were going to be taking technology forward; not backwards. I'm losing a lot of time having to install and uninstall and reinstall to get the environment into a mode that works lke I want it to work. If they didn't intend for SS standard edition to be used with VS 2005 Pro, then why did they include SS developers edition in the Pro package?
I am trying to execute an SSIS package from an MS Access 2003 database that imports a table from the Access database into a target table in SQL 2005. I saved the package in SQL 2005 and tested it out. If I run it from the Management Studio Console with Run->Execute ... everything works just fine. However, if I try to run it using the following line command "Exec master.dbo.xp_cmdshell 'DTExec /SER DATAFORCE /DTS SQL2005TestPackage /CHECKPOINTING OFF /REPORTING V'" the execution will always fail when the Access database is open (shared mode). The connection manager looks like this: "Data Source=E:Test.mdb;Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Jet OLEDB:Global Bulk Transactions=1". The error is listed below:
Code: 0xC0202009 Source: NewPackage Connection manager "SourceConnectionOLEDB" Description: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "Could not use ''; file already in use.".
Maybe it worked once, but in most time it doesn't work, query like below
select top 10 * from OpenRowSet('microsoft.jet.oledb.4.0','Excel 8.0;hdr=yes;database=\ws8webablefilessitefiles4000010 eibcactive.xls', 'select * from [crap2$]')
I got error
OLE DB provider "microsoft.jet.oledb.4.0" for linked server "(null)" returned message "Unspecified error". Msg 7303, Level 16, State 1, Line 1 Cannot initialize the data source object of OLE DB provider "microsoft.jet.oledb.4.0" for linked server "(null)".
but the same query can run without any problem on a SQL 2000 server run on a server in the same network.
I have had the same Error 29506 that a lot of people are having when installing SP2 for SQL 2005. I've tried the install with myself (a Domain Admin), local Administrator, cascaded full rights down the entire file system structure and still not luck. One thing I'm wondering if it is hanging me up is that all of my databases and logs are not on C:. They are on LUNS on a NetApp SAN (Data is on M: and Logs is on L:). Even the system databases (Master, Model, etc.) are on the LUNs. The error logs referenced permissions to the data directory under the default installation path on C:. Anyone else have this problem? Got a fix? I really don't want to migrate all of my data back to the local machine, apply the patch, them migrate back. Surely this SP should be able to read the data location from the SQL engine. And surely others have their databases on SANs.... I'm at a loss.
From a aspx page I was able to Pass values (valid values) for the parameters to SSRS report 2005 which uses OLAP cube as datasource and got back the expectd result. but when I pass value other than a valid value i am getting ERROR message. do we always have to pass valid values only? any help is greatly appreciated.
In my SQL Server Management Studio Express (SSMSE), pubs Database has a Stored Procedure "byroyalty":
ALTER PROCEDURE byroyalty @percentage int
AS
select au_id from titleauthor
where titleauthor.royaltyper = @percentage
And Table "titleauthor" is: au_id title_id au_ord royaltyper
172-32-1176 PS3333 1 100
213-46-8915 BU1032 2 40
213-46-8915 BU2075 1 100
238-95-7766 PC1035 1 100
267-41-2394 BU1111 2 40
267-41-2394 TC7777 2 30
274-80-9391 BU7832 1 100
409-56-7008 BU1032 1 60
427-17-2319 PC8888 1 50
472-27-2349 TC7777 3 30
486-29-1786 PC9999 1 100
486-29-1786 PS7777 1 100
648-92-1872 TC4203 1 100
672-71-3249 TC7777 1 40
712-45-1867 MC2222 1 100
722-51-5454 MC3021 1 75
724-80-9391 BU1111 1 60
724-80-9391 PS1372 2 25
756-30-7391 PS1372 1 75
807-91-6654 TC3218 1 100
846-92-7186 PC8888 2 50
899-46-2035 MC3021 2 25
899-46-2035 PS2091 2 50
998-72-3567 PS2091 1 50
998-72-3567 PS2106 1 100
NULL NULL NULL NULL //////////////////////////////////////////////////////////////////////////////////////////// I try to do an ADO.NET 2.0-VB 2005 programming in my VB 2005 Express to get @percentage printed out in the VB Form1. I read some articles in the websites and MSDN about this task and I am very confused about "How to Work with Output Parameters & Report their Values in VB Forms": (1) Do I need the Form.vb [Design] and specify its properties of the object and classes I want to printout? (2) After the SqlConnectionString and the connection.Open(), how can I bring the value of @percentage to the Form.vb? (3) The following is my imcomplete, crude draft code:
Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=pubs;Integrated Security=SSPI;"
Dim connection As SqlConnection = New
SqlConnection(connectionString)
Try
connection.Open()
Dim command As SqlCommand = New SqlCommand("byroyalty", connection)
command.CommandType = CommandType.StoredProcedure ................................................................... .................................................................. etc. //////////////////////////////////////////////////////////////////////////////////////////////////////////////////// From the above-mentioned (1), (2) and (3), you can see how much I am lost/confused in attempting to do this task. Please help and give me some guidances and good key instructions for getting the output parameter printed out in the FORM.vb in my VB 2005 Express project.
We have an Office SharePoint 2007 site, we developed a couple of web parts and added them to our site. We used SQL Server Reporting services 2005 as our reporting solution. The reports are hosted on the report center and when we need a report, we open it by sending a URL requesting the report, passing the report parameters in the URL query string. So the report is filtered based on the parameters passed from the web parts.
But since best practices say that you should host reports directly under SharePoint, by configuring the reporting services to run in the SharePoint integrated mode. We followed the steps and installed SharePointRS and we finally succeeded to publish the reports to a SharePoint folder, but we had a limitation: we are unable to pass the report parameters internally to the report hosted in SharePoint. If we passed them in the query string as the report center case, SharePoint neglects them totally. So the question is: how can I pass parameters internally between a SharePoint web part and a SQL server 2005 reporting services report hosted in SharePoint?
I'm pretty new to DTS, so forgive me if this is basic. I created a simple DTS package to run a query and export it to a text file. I can execute the package fine from my workstation through EM, but when I try to execute the job to run the package I get this error: Error = -2147467259 (80004005) Error string: Error opening datafile: Access is denied.
I think that maybe SQL Agent doesn't have the right permissions to write to that network drive. What should the permissions be?
This is probably very simple, but I can't get passed this problem.
I have a report in MS Access that uses info generated by a query. One of the text fields in the query contains either the word 'Select' or the name of a course. The report should display a space if the value is 'Select', or the actual value of the field in any other case. The field can never contain a null value.
I've used: =IIf([optVoc1]="Select","",[optVoc1]) in the text box on the report, but this only returns #error regardless of the actual content of the field.
I create and schedule a SQL job to run every minute to update a table base on certain condition but it doesn't work. Job history says successful every time but the table doesn't get updated.
However if I move it to Query Analyzer and run it under dba, it will work. Thinking that it may have to do with the user the job run as, I then change run as user from self to dba. But still SQL job won't update my table.
Anything about user permission or security that I can check? Or it there any other possibility?
When I run the select its fine but I cannot delete..... i have done this many times and it has worked.... I cannot see the error what am i missing
select eqnow.empnumber, eqnow_names.empnumber, eqnow_names.names --delete from eqnow inner join eqnow_names on eqnow.empnumber = eqnow_names.empnumber where eqnow_names.names is null
i get this error Server: Msg 156, Level 15, State 1, Line 4 Incorrect syntax near the keyword 'inner'.
When I try to install the problem I get the following error.
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The log tells me nothing useful. I can't start the thing manually because after clicking cancel on the error message, the installer proceeds to roll back the installation.
I'd like to get some ideas for the following: I am writing a quick mini-application that searches for records in a database, which is easy enough. However, if the search term comes up empty, I need to return 10 records before the positon the search term would be in if it existed, and 10 records after. (Obviously the results are ordered on the search term column) So for example, if I am searching on "Microsoft", and it doesn't exist in my table, I need to return the 10 records that come before Microsoft alphabetically, and then the 10 that come after it. I have a SP that does this, but it is pretty messy and I'd like to see if anyone else had some ideas that might be better. Thanks!
This is the autogenerated code from the SelectCommand of my DataAdapter, except the red text. This DataAdapter is used to fill a DataGrid. What I want to do, is to calculate the total memory (4 slots) / PC.This code makes the sum of all memory of all PC's together.I'm not sure if the group by clause is needed here ...Me.OleDbSelectCommand1.CommandText = "SELECT PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type AS Case_Type, Processor_T" & _"ype.Type AS Processor_Type, Processor_Snelheid.Snelheid AS Processor_Snelheid, " & _"(SELECT SUM(Memory) FROM Memory, PC, RAM WHERE RAM.PcID = PC.ID AND RAM.GrootteID = Memory.ID)" & _"AS Memory, OS.Naam AS OS, OS_SP.Nummer AS OS_SP, Gebru" & _"iker.Naam AS Gebruiker_Naam, Status.Status, PC.Tagged FROM (Status RIGHT OUTER J" & _"OIN ((((((((PC LEFT OUTER JOIN (RAM LEFT OUTER JOIN Geheugen ON RAM.GrootteID = " & _"Geheugen.ID) ON PC.ID = RAM.PcID) LEFT OUTER JOIN Case_Type ON PC.Case_TypeID = " & _"Case_Type.ID) LEFT OUTER JOIN OS_SP ON PC.OS_SpID = OS_SP.ID) LEFT OUTER JOIN Ge" & _"bruiker ON PC.GebruikersID = Gebruiker.ID) LEFT OUTER JOIN Processor_Snelheid ON" & _" PC.Processor_SnelheidID = Processor_Snelheid.ID) LEFT OUTER JOIN Processor_Type" & _" ON PC.Processor_TypeID = Processor_Type.ID) LEFT OUTER JOIN OS ON PC.OsID = OS." & _"ID) LEFT OUTER JOIN Switchbox_Details ON PC.ID = Switchbox_Details.PcID) ON Stat" & _"us.ID = PC.StatusID) GROUP BY PC.ID, PC.Nummer, PC.Netwerknaam, Case_Type.Type, " & _"Processor_Type.Type, Processor_Snelheid.Snelheid, OS.Naam, OS_" & _"SP.Nummer, Gebruiker.Naam, Status.Status, PC.Tagged"I would like to know how to calculate the total memory for each separate PC.Hope you can help me.
I try to copy a DB from one server to another. On the target server an older version of the DB has been deleted and I now try to attach the new version using "sp_attach_db DBname, Filelocation", but I always get an error "Device Activation error. The physical file name 'D:mssql7dataAgency_log.ldf' may be incorrect" "Database 'Agency' cannot be Created"
To me it seems that the database is looking for the log files (now deleted). I've tried forcing a new log file I created using the same locations for the mdfs. I've tried using create a new database and replace the mdf file, but nothing works.
I wanted to create a new trigger, but Enterprise Manager tells me about an "Incorrect syntax near @UpdatedByID, line 28". I double-checked everything, but it still does not work :mad: .
Any hints :confused: ?
TIA,
-Gernot
Here is the statement (line 28 is marked with ***):
CREATE TRIGGER TransferToABII ON [dbo].[CALGeneral] FOR INSERT AS BEGIN TRANSACTION BEGIN DECLARE @Event varchar(255), @BBaseUID int, @StartDate smalldatetime, @EndDate smalldatetime, @Details varchar(255), @AddressID int, @ProjectID int, @UpdatedByID int, @ActID int, @EventID int
BEGIN EXEC BrainBase.dbo.BB_NEW_CREATE_NoteTask_Ret *** (@UpdatedByID, @AddressID, @ProjectID, @BBaseUID, @StartDate, GetDate(), @Event, NULL, NULL, NULL, NULL, @Details text, @ActID = @ActID OUTPUT, @EventID = @EventID OUTPUT) END BEGIN UPDATE CALGeneral SET ActID = @ActID WHERE ID = INSERTED.ID END END
IF @@ERROR <> 0 BEGIN RAISERROR('Error occured',16,1) ROLLBACK TRANSACTION END COMMIT TRANSACTION
I'm combining first name, last name, middle name, and an ID number together into an alias. Then I need to match that alias with a variable passed to the page (its a search results page). The problem is it claims that there is no table with the name of my alias. Anyone know what I'm doing wrong?
A mockup of the SQL looks like this:
SELECT UserID, Last_Name + ', ' + First_Name + ' ' + Middle_Name + '.' AS name FROM Table WHERE name LIKE 'variable%'
Everything looks right with the results, if I take out the WHERE clause it has name displayed properly and joined together with the rest of the data in the results properly.
Thanks in advance for any help that can be provided!
I have a query that doesn't work when i use 4 name convention instead of a openquery. The msg is below. Anyone know what is going on? Both queries are the same but one doesn't work.
-- works SELECT TOP 1 * FROM OPENQUERY(AS400_PROD, 'SELECT * FROM PPTREASUSA.ORDDET')
-- doesnt work SELECT TOP 1 * FROM AS400_PROD.S1030Y3M.PPTREASUSA.ORDDET
Server: Msg 7399, Level 16, State 1, Line 1 OLE DB provider 'MSDASQL' reported an error. [OLE/DB provider returned message: Unspecified error] [OLE/DB provider returned message: [IBM][iSeries Access ODBC Driver][DB2 UDB]CPF5715 - File ORDDET01 in library QTEMP not found.] OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBSchemaRowset::GetRowset returned 0x80004005: ].
hi all, i made a stored procedure that uses the sp_send_dbmail to send mails. SQL server dislays the message "mail queued" but nothing is recieved
here is the code of the stored procedure i made EXEC msdb.dbo.sp_send_dbmail @profile_name = 'Exams', @recipients = 'me@domain.com', @Body_format = 'HTML' , @subject = 'Room Preparation' , @body='hi there'; so can anyone help with this issue thanks in advance
I have a drill through that passes four parameters. Three are passed from the current selections in that reports parameters and the fourth needs to be the customer name they click on in the body of the report so it's passed as Fields!fieldname.Value. When I click on the customer name, the drillthough fires but the report simply doesn't load. If I remove the parameter from the field clicked on and just pass the three parameters, it goes to the drill through correctly and that fourth parameter just sets to the default for that parameter in that report.
I can then simply check that parameter and select the value from the list that is exactly the same as the value I was attempting to pass it in the drill through and report refreshes correctly.
Whatever it is, is something in the manner that the value is passed in the drill through specifically.
